JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab would be advantage.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Description :-

· Responsible for day-to-day operation and planning manpower allocation based on job requirements

· Arrange logistics for deliveries and provide photo reports for job completion

· Source materials and spare parts as a purchaser when needed

· Proficient in reading drawings for steel and piping work

· Flexible in adapting to changes in job scope

· Inspect and prepare quotations for workshop fabrication, vessel port calls, anchorage work, and

voyage jobs

· Manage production teams and subcontractors for efficient job mobilization

· Prepare project schedules and oversee project activities for timely completion and quality

· Negotiate and liaise with vendors and suppliers for best prices and availability of materials

· Conduct regular equipment inspections and maintenance

· Monitor project budgets and expenses for cost-effectiveness

· Maintain documentation and records related to project activities and operations

· Stay updated with industry trends and suggest improvements and innovative solutions

· Foster teamwork and effective communication to create a positive work environment

· Adhere to safety protocols and regulations for a safe working environment

Requirements :-

· Higher Nitec/Diploma/Degree in Marine Engineering or equivalent

· Highly motivated individual with a strong work ethic and proactive approach

· Quick learners who take ownership of diverse projects and continuously acquire new skills

· Forward-thinking professionals who seek challenges for self-improvement and assisting others

· Able to travel overseas for Project discussion and management

. Have driving license is a bonus

· Fresh Graduate is welcome

As part of this role, you will

• Provide technical consulting and product guidance to banks and partners integrating Wise, primarily post-sale

• Support business development by aiding larger partners requiring novel features

• Assist partners in the implementation phase, defining technical solutions and documenting requirements

• Participate in feature definition, prioritisation, and long-term strategy planning with the Wise Platform team

• Ensure partners deliver the best integration within their constraints for an excellent customer experience

• Collaborate with Implementation Managers, Product Managers, and Engineers, making product and project decisions

• Work on scaling Wise Platform into new regions, overcoming associated challenges

• Improve integration experience through documentation, APIs, SDKs, code samples, and reference implementations

• Collaborate with the technical presales team to support the sales cycle and secure new partnerships

• Enhance internal processes to handle multiple integrations in parallel

• Design and develop new features for Wise services and expose them on the public API when needed

• Troubleshoot, test, and resolve technical issues, supporting the API team with complex problems

This role will give you the opportunity to

• Choose your own path to success - you’ll have the freedom to define the vision and responsibility for making it happen.

• Identify problems and unlock opportunities for Wise and partners through technology solutions.

• Inspire other teams internally and externally with your ideas, knowledge and self-starter attitude.

• Travel to work with our teams in Tallinn and London as well as visit our partners in EMEA.

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering(Civil) or equivalen.
• At least 2 years(s) of working experience in the related field is required for this position.
• Required Skill(s): Understand drawing, Quantity take off, Prepare BQ, Familiar with costing, Supplier sourcing, Contract administration.
• Preferably Senior Executive specialized in Engineering-Civil/Construction/Structural or equivalent.
• Familar with structural steelworks.
• Other QS duties as assigned from time to time.

Job Description

• Identify and evaluate problems / root cause of process inefficiency.
• Identify and source for the potential improvement method to improve process efficiency (Safety, Quality, Cost, Delivery and Environmental).
• Lead Project Team (Engineers and Technicians) on process improvement and development activities assigned.
• Develop process digitization concepts and drive big-data analytics for process knowledge improvement.
• Work closely with relevant departments for process improvement and breakthrough projects.
• Present and manage project progress, cost and completion deadline according to schedule.
• Any ad-hoc duties as assigned.

Job Requirements

• Degree in Metallurgy, Materials Science / Engineering, or equivalent with more than 3 years of relevant experience (Experience in Steel / Aluminum metallurgy and Heat Treatment is preferred).
• Diploma in the above-mentioned fields with more than 6 years of relevant experience.
• Knowledge of manufacturing processes and IIOT solution deployment is preferred.
• Preferably Sound knowledge in Process Improvement Methodology.
• Willing to travel; Willing to station 3-12 months in other countries subjected to project requirements.

Permanent, Full Time

We are seeking candidates with:

· A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.

· At least 2 years of experience in Engine Repair & Maintenance.

· Fresh graduates are welcome, and the company will provide training.

Roles & Responsibilities

· Perform the repair, maintenance, or overhaul of marine diesel engines 2 & 4 stroke under the supervision of Engineer / Technicians.

· Comply with all the requirements to carry out the jobs in the shipyards or anchorages.

· Lifting and shifting heavy components of engine back to the workshop for repair/reconditioning and vice-versa.

· Ensure prompt response and smooth communication with the customers

· Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

· Relevant marine / mechanical / engineering qualification

· Hands-on experience in trouble-shooting, maintenance and repair is an added advantage

· Candidates with no experience may apply as apprentices as training will be provided

· Willing to work in a shipyard/anchorage environment

· Able to work overtime as and when needed

An attractive remuneration package and career growth opportunities await the successful candidates. Interested applicants are invited to email with detailed resumes indicating their current and expected salary.

Purpose of the Job

To achieve monthly and annual rental & sales revenue by servicing new and existing customers through renting & selling of Choon Huat’s construction equipment to the construction industry.

Job Description

• Create new accounts and identify new business opportunities in the equipment rental & sales business;
• Development of new customers and new applications / solutions for existing customers;
• Resolves customer complaints by investigating problems, developing solutions and making recommendations to the management;
• To ensure that the network of current and potential customers is expanded and maintained through weekly external face to face and telephone sales calls;
• Coordinate and liaise with Operation Department pertaining to sales order and after sales supports;
• Communicate technical expectation to the customer relating to the proposed solution, Choon Huat’s fleet, installation, operation and maintenance of all services provide;
• Take on call responsibility as required, and promote all Choon Huat products and services at all times;
• Cultivate relationships with existing and potential customers; and
• Submit sales activity reports regularly.

Requirements

• No prior experience required. Bonus if the candidate has an experience in renewable energy technologies (solar, wind, energy storage, etc.).
• Excellent communication and presentation skills.
• Ability to work independently and as part of a team.
• Strong problem-solving and negotiation skills.
• Product training will be provided.
• Possess a valid Singapore driving licence.

Benefits:

• Working Schedule Monday to Friday 8am to 6pm
• Working Location – West area (Nearest MRT station – Joo Koon)
• Cell Phone
• Company Vehicle
• Attractive commission scheme, Performance bonus

Job Description: Software Engineer

As a Software Engineer at D-SIMLAB Technologies, you will gain exposure to both technical and soft skills development while working on innovative software solutions for world-leading semiconductor manufacturers. This role extends beyond software development, involving close collaboration with clients and providing professional consultation services to support their operational needs.

Key Responsibilities:

• Software Product Deployment and Delivery:
  Collaborate with a team of Software Engineers and Data Scientists to ensure smooth deployment and delivery of D-SIMLAB’s software products at semiconductor manufacturing sites. Work with global clients to address their technical needs and deliver high-quality solutions.
• Product Enhancement:
  Contribute to the continuous improvement of D-SIMLAB’s software, focusing on areas such as data visualization and algorithm optimization to improve product quality and user experience. Actively participate in product development cycles, from conceptualization to implementation.
• Key Software Component Development:
  Take ownership of the development and maintenance of critical software components, ensuring scalability, performance, and reliability in diverse manufacturing environments.
• Client Consultation:
  Provide technical expertise and consultation to customers, helping them implement and optimize D-SIMLAB’s software solutions in their manufacturing processes.
  Assist in troubleshooting and problem-solving to enhance client satisfaction.
• Collaboration and Innovation:
  Work in a multicultural and multidisciplinary team, contributing to innovative ideas and technical solutions. Stay updated on the latest technology trends and actively seek ways to improve the efficiency and performance of the software.

Candidate Requirements:

• Education:
  Bachelor’s or Master’s degree in Computer Science, Software Engineering, Industrial Engineering, or a related field.
  Diploma holders with relevant experience are encouraged to apply.
• Technical Skills:
  Strong skills in C#, .NET, SQL.
  Familiarity with software development life cycles, agile methodologies, and version control systems.
  Experience with algorithms, data structures, and software architecture design.
  Experience with visualization frameworks and tools is an advantage.
• Soft Skills:
  Strong interpersonal and communication skills, with the ability to work effectively with clients and teams from different technical and cultural backgrounds.
• Adaptability and Willingness to Travel:
  Willingness to travel internationally and work on challenging projects at semiconductor manufacturing sites. Ability to adapt quickly to new environments and work under pressure to meet project deadlines.
• Career Growth:
  Interest in personal and professional growth by enhancing both technical and soft skills.Fresh graduates are welcome to apply.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

We transform Industrial Waste into Metals, Minerals, Specialty Chemicals and Energy.

We are seeking spirited Individuals with high positive energy levels. Happy Individuals with a passion for the

Environment and Sustainability. Individuals that want to make a difference. You must be a resourceful problem solver, with excellent people skills. To be part of our Green engineering team to maintain our High Temperature Incinerator, and Industrial Waste Water Treatment System for Hazardous Waste, and Waste Plastic to Oil Conversion.

• Candidate must possess at least Diploma in Engineering (Industrial, Mechanical, Mechatronic/Electromechanical, Electrical) or equivalent.
• At least 3 Year(s) of working experience in active preventive maintenance.
• Familiar with pumps, motors, control panels, piping, elevtricals wiring.
• Preferably with a specialise skill such as Welding, Pneumatics, Hydraulics, Piping, Instrumentation & Controls etc.
• Certifications in Safety and/or other specialities
• Handle a team of technicians

Responsible for maintenance/trouble shooting of plant equipment (mechanical and electrical systems) at water treatment and waste water treatent plants.

Prepare technical reports and submission to the clients.

Purchasing of materials as required.

Good technical knowledge and codes of safe work practice.

Maintain good housekeeping.

Minimum Diploma qualification.

Must possess WSQ certificates (BCSS, Confned Space Supervisor/Assessor, WAH)

Driving Licence Class 3 preferred.

5 years relevant working experience at Public Utilities Board (PUB) waterworks and water reclamation plants.

• Job Purpose

Biosearch Technologies™ provides products and services for genomic analysis that support mission critical applications for global customers in agrigenomics and human healthcare. The portfolio offers integrated tools and technologies to accelerate sample preparation, amplification, cloning and expression, next generation sequencing (NGS), custom oligonucleotide synthesis, nucleic acid chemistry reagents, and oligo therapeutics. Biosearch Technologies is currently recruiting for a field service engineer II to join us in providing front-line technical support to our repertoire of genomics platform and consumables as described above.

With a focus on always putting customers first, our Field Service Engineer is expected to work closely with our regional customer base to ensure maximum equipment uptime, software optimal utilization, training and troubleshooting functions. 

Field Service Engineer is expected to be a role model and poise to mentor and develop junior service engineers on the day-to-day activities, coaching sessions and able to report and assign task to juniors and self and provide reports back to global service leads.

Key Responsibilities

• Build strong service support rapport with regional key account customers in APAC.
• Site Preparation; instrument Installations; training; troubleshooting, preventative maintenance as core task
• Facilitating service contract proposals and tracking as and when required.
• Function as an integral part of a wider global support team to offer “In Time zone 24/7” emergency service support call and troubleshooting assistance as and when assigned with urgent breakdown call with overnight travel either regionally or globally.    
• Train and support customer in the application of “SFDC sales force” CRM platform as a service case tool to record and track service cases
• Support the generation of training aids and technical documentations as required
• Provide timely and concise Pre/Post trip reports and SFDC updates to maintain proper customer CRM records
• Work closely with the commercial and customer service team to ensure prompt and responsive customer support in building strong customer allegiance for the LGC, D&G branding.
• After normal office hours on-call support assignments (global support rotation) as part of a global technical support framework.
• Involving in engineering project, product management request for technical feedback/support
• The individual will be responsible for instrument commissioning, training, test and repair of equipment, and preventative maintenance.
• Expected to mentor junior field service engineers in problem resolution.
• Seeks continuous improvement processes to optimize technical support to our customers in the region.
• This position is responsible to effectively communicate instrument status, issues, and customer complaints and needs to appropriate managers and internal resources.  Will be responsible to proactively take ownership and follow-through with generated issues or complaints reported from themselves, as assigned, or from junior service engineers.
• Responds with flexibility and collaboration to the needs of the business – both internally and externally – by addressing important corporate initiatives when requested by management.
• Ability to handle clients, distributors professionally during all interface and maintain a positive company images
• The motivation to learn and constantly improve processes and tools
• Adhere to company safety standards and promote safety culture throughout the company
• Any other ad-hoc projects and duties as required by the management

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Roles & Responsibilities (Quantity Surveyor):

Understand, Review, and be well-versed in preparing contract documents and drawings.

Source sub-contractors, and vendors for quotation during tendering

Evaluate quotation and costing summary for approval before tender submission

Analyse tender outcomes and prepare detailed reports for review

Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.

Liaising with site managers, clients, contractors, and subcontractors.

Prepare reports, analyses, contracts, budgets, risk assessments, and other documents.

Advising managers and clients on improvements and new strategies.

Keeping track of materials and ordering more when required.

Documenting any changes in design and updating budgets.

Establishing and maintaining professional relationships with external and internal stakeholders.

Visiting various sites, as and when required. Measure data on-site in order to ensure the accuracy of the claim.

Provide measurement, cost evaluation and quotation support for engineering projects.

Preparing Monthly progress claims and certifications to Subcontractor claims in a timely manner.

Prepare monthly report, update and maintain records for all contractual relevant scopes

Undertake costs analysis for all project trade works Prepare and disseminate information to appropriate employees regarding contract status, and facilitate contractor meetings.

Ensure the contractor is in compliance with legal requirements, owner specifications, and government regulations.

Provide contract summaries and ensure contract execution in accordance with company policy.

Prepare payment claims, payment certificates, and check invoices against delivery order

Track payments and deadlines.

Roles & Responsibilities (Project Engineer):

Prepare, schedule, coordinate, and monitor the assigned scope of works

Coordinate with the internal team, clients / main contractor, architect, consultants, suppliers, and subcontractors

Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications

Analyse overall quality control of the work (budget, schedule, plans, performance) and report regularly

Assign responsibilities, mentor, lead project team, and attend meetings

Review engineering deliverables and initiate appropriate corrective actions

Responsible for submission of technical drawings, and work schedules to clients for approval;

Taking responsibility for structural analysis, calculation, preparation of design sketches and drawings

Review shop drawings and built drawings;

Responsible for overall aspects of the management of subcontractors;

Plan, work, schedule, and delivery of equipment and materials to the site;

Responsible for monthly progress claims and project costing;

Ensure all required permits and clearances are obtained from respective govt agencies and client

Work closely with Consultants, Regulatory Authorities, and Contractors, to provide planning, design, and supervision to solve site matters and timely completion of the projects;

Take part in the project plan and give inputs regarding implementation;

Manage Internal team, and Sub-contractors, on-site to ensure all works comply with regulatory/requirements;

Update the progress of construction work to Project / Site Manager

Keep in touch with designers, architects, consultants, and suppliers to ensure workflow is on schedule;

Ensure implementation and sustaining of construction quality and safety programme;

JOB REQUIREMENTS:

Preferably Degree in Quantity Surveying or Engineering (Civil / Mechanical / Structural / Construction)

Skills in MS Office, Auto Cad, Microsoft Project

Work experience: minimum 8 years of experience in the relevant field

Good communication skills in English, must have to liaise effectively with other professionals

Possess excellent negotiation, and coordination skills and able to work in fast-paced environment

Kindly submit your CV along with the following details;

Current / Last Drawn Salary (in SGD)

Expected Salary (in SGD)

Availability

Residency Status in Singapore

We regret that only shortlisted candidates will be notified.

Are you interested in joining a team that is revolutionizing the resource exploration and navigation industry? Atomionics is developing quantum sensors using cold atom interferometry, where atoms are cooled to nearly absolute zero using lasers. At such extreme temperatures, these atoms behave like waves, enabling precise measurement of forces acting on them.

This technology has vast potential applications, including advancing the zero-carbon energy transition, enhancing the performance of inertial navigation systems, and revolutionizing the global positioning system. At Atomionics, you will have the opportunity to design, prototype, test, refine and manufacture Quantum Gravity Sensors. You will develop solutions to improve the performance of our sensor, while also making it compact and robust for field deployment on projects around the world.

Atomionics is backed by some outstanding investors across private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other notable angels.

Responsibilities

• Design and fabrication of jigs, mounts, and fixtures for optics, electronics, and vacuum assembly.
• Create CAD models and engineering drawings, and select appropriate manufacturing processes forprecision manufacturing and fabrication of optomechanical components.
• Structural, vibrational, and heat transfer analysis (FEA) to ensure robustness in harsh environment
• Design temperature and vibration control systems for different subsystems.
• Liaise with our international supply chain partners located in China, France, Germany, India, Italy,USA, etc. and work within a multicultural team.

About you

• An absolutely driven individual with creative problem-solving skills, analytical mind, and persistence, ideally, demonstrated
• Highly skilled with CAD software: Autodesk Inventor / Solidworks etc
• Deeply knowledgeable in manufacturing techniques, surface finishing and assembly
• Skilled in GD&T for engineering drawings including tolerance stacks
• Skilled with hands-on fabrication including machining lathe, CNC, laser cutter, 3D printers

Even better if you have

• Experience in thermal design, including heat sinks, heat pipes, liquid heat exchangers, peltiers and FEA for thermal simulations
• Experience in designing simple PCBs & cable harnesses
• Been through a full product development cycle for a device with a complex system architecture
• Worked on personal hobby projects (and can brag about them!)

What we can offer you

• A chance to learn about the intricacies of deep-tech research, product development, and strategy in a high-growth startup while working with some of the best engineers and physicists
• Work on the cutting edge of quantum technology
• Develop robust applications for translational research
• Board games and curry night

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Job Description

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review Architectural drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Degree in Civil/Structural Engineering.
• Minimum 5 years Site/Working Experience.
• Good Organizational and planning skill.
• Able to work independently and as a team.
• Candidates with Marine Project experience preferred.