Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Job Responsibilities:

• Develop and implement quality assurance plans, standards, and protocols for production or project management.
• Review project specifications and engineering drawings to establish quality standards.
• Ensure all work complies with relevant codes, ISO standards and regulations.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Identify and document any quality issues, non-conformance and corrective actions.
• Providing guidance and advice to the Project Manager on significant changes to the quality management system with direct impact on site operations.
• Training the production team on quality control measures to improve product excellence.
• Collaborate with production, engineering and project management teams to identify and implement process improvements.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Conduct root cause analysis for site level NCRs and recommend corrective action and preventive actions.
• Overall knowledge of safety policies and procedures to achieve safe work practices.

Requirements:

• Diploma /Degree in Engineering, Quality Management or related filed.
• Minimum 5 to 8 years of working experience quality assurance/control in industrial /equipment production or engineering projects would be advantageous.
• Proficient in quality inspection tools, data analysis and report writing.
• Up to date knowledge of federal and industry standards and best practices.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Excellent problem solving and analytical skills.
• Keen attention to detail.
• Willingness to travel for site inspections.
• Able to work independently and a good team player.
• Candidate who can start work within short notice or immediately would be advantageous.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

· Perform Inspections (Incoming, FAI, In-Process and Final Inspection) for dimension & welding requirements

· Familiar with all standard types of mechanical and electrical measuring equipment

· CMM programming knowledge is a must

· Able to interpret drawings and customer’s requirements

· Monitor all measuring equipment for calibration due dates; and to coordinate outsourced calibration

· Generate accurate inspection reports, Non-Conformance Reports & other customer required documentation

· Assist in communicating the non-conformances identified during the inspection to relevant production department personals

· To assist Quality Department in reviewing Mill Certs and other outsourced reports

· Maintain all controlled document files & test records for the required duration as dictated by standards / customer

· Assist to liaise and handle customer for final inspection

· Assist to coordinate and relay QC requirements to vendors

· Assist QA in documents related activities

· Good Communication skill is required

· Report to assistant manager Quality

· Assist in performing ad hoc duties

Requirements:

· Minimum N'Level, O'Leve

· At least 5 years of working experience related to the manufacturing environment, preferably from the oil & gas industry

· At Able to interpret drawings and technical documents

· Able to work independently and contribute to the team excellence

· Good technical competence & strong communication skills

· Good organizing and coordination skills

PRINCIPAL ACCOUNTABILITIES

QC Inspector will work closely with Supervisor/Lead to complete the daily assigned tasks (incoming inspection, in-process inspection, NDT inspection and final/outgoing inspection). Conducting inspection on various stages of the inspection to ensure the products fulfill the required quality as given in the production requirements.

JOB RESPONSIBILITIES

1. Perform incoming material inspections as per the appropriate Work Instruction (WI).

2. Perform correctly the daily in-process and final inspection of the product in accordance with the Quality Procedure (QP) and WI.

3. Ensure material/component traceability (router sheet) is maintained throughout the manufacturing process.

4. Ensure to clock in/out (VM) and update the router sheet correctly.

5. Ensure only calibrated and validated equipment/measuring devices are used in the inspection processes.

6. Report to the Supervisor/Lead on any non-conformance(s) detected during inspection.

7. Ensure repaired/reworked items are re-inspected before releasing the product for further processing or delivery.

8. Prepare and complete inspection records prior to shipment to customers.

9. Perform any ad-hoc duties as and when assigned by superior.

10. Support in the orientation of new recruitment for the quality team by providing on-the-job-training and sharing the company culture and practice, and method of inspection, etc.

11. Ensures 5S is implemented in the work area.

12. Adheres company’s guidelines with regards to Safety and Quality.

13. Complies to Company Code of Business Conduct.

14. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Self-development – shows personal commitment and takes action to continuously improve. Accepts assignments that broaden capabilities

4. Action Oriented – display a can-do attitude in good and bad times. Steps up to handle tough issues.

5. Knowledge of ISO9001, Quality Management System, Quality Control and usage of measuring devices/tools.

6. Preferably knowledgeable in LDP (Liquid Die penetrant or Non destructive testing).

QUALIFICATION GUIDE

1. Education : NITEC/ O or N Levels

2. Experience : At least 1-2 years of working experience in fast-pace Manufacturing environment (preferably Oil and Gas manufacturing)

3. Communication : Able to communicate in (read, write, speak, listen and Understand) simple English and Mandarin.

: Good interpersonal skills

4. Physical : Has to be physically fit (with good eyesight)

5. Working Condition : Shop-floor Environment. Able to work rotating shift and overtime on weekdays, weekends and sometimes public holidays.

The Opportunity:

Responsible for providing supervision of inspection process and staff. Ensure staffing levels and work assignments meet facility requirements. Assist in the administration of the Quality Assurance (QA) and Quality Control (QC) programs and ensure compliance with the Quality Manual as well as all applicable regulations and standards for which Therapak/VWR is certified to. Perform acceptance activities as required to ensure Company objectives are met. May provide oversight to lower-level supervisor(s).

What we are looking for:

• Bachelor’s degree in chemistry, Biology, Biochemistry or science related field
• 5 years of related/applicable lab experience; minimum 1 year of supervisory experience
• Required language(s): English
• Required Skill(s): MS Office (Words, Excel and Access)
• Ability to work in a team environment
• Ability to identify and resolve issues
• Ability to lead a team and provide guidance
• Strong decision-making and communication skills
• Strong interpersonal and organizational skills

How You Will Thrive and Create an Impact:

Supervision of QC Associates

• Directly supervises the quality control associates, monitor individual skills, technique and abilities for most efficient operation.
• To follow progress of work; anticipate or investigate delays or inadequate performance by taking corrective action within limits of established practice and aid other departments as needed.
• Provides on the floor and technical support to quality control associates with guidance and improve the quality system, regulatory policies and procedures.

Drive QC Operation and Laboratory Operational Excellence

• Support and enforce the quality management system related to QC, regulatory policies and work instructions.
• SAP account holder for method creation, support QC data input and release, inspection plans and reports creation to ensure the process flow is smooth.
• Oversee quality and quantity of all QC laboratory output and testing timelines by monitoring testing duration, arrange for equipment, materials and supplies to be available for QC testing
• Oversee that equipment is given proper care; troubleshoot faulty operations to determine cause and arrange for required repair and maintenance which could affect operational testing needs

Drive continuous QC training and development

• Provide or arranges for training and cross training to employees in the performance of duties by assisting and instruct personnel as necessary to insure proper flow of work through department.
• Provide guidance to all level Technicians including test methods, analytical technique, good laboratory practice, paperwork completion, equipment, schedule interpretation, and LIMS support.

Maintain QC Document Control and lead in investigation

• Review and approval of controlled Quality Control documents including but not limited to specifications, procedures, work instructions, validation protocols, equipment software audit trials, stability worksheets, data integrity logs and validation reports.
• Ensure department documents and procedures are up to date and reflect current practice; revising procedures & processes when needed.
• Performs investigations for laboratory out of specification (OOS), out of trend (OOT) questionable results, quality event, CAPA and complaint related to testing, safety related incidents and/or processes related to the QC laboratory.

Maintain Quality, Regulatory and Safety Compliance

• Understands regulatory requirements for 21 CFR 820, ISO 17025, EXCiPACT, GLP, GMP including USP/EP/BP/JP/ChP general practices and procedures.
• Proactively maintains current industry and regulatory knowledge for medical devices, ISO 17025, GMP principles and current analytical methodology.
• Enforce prescribed local safety rules and regulations related to QC laboratory; insure that work areas are maintained in a neat and orderly condition in the work environment; to perform safety and security procedures to open and close buildings and facilities.

Customer Centric

• Work with external customers, regulatory agents and vendors during audits and site visits.
• Work and collaborate with internal stakeholders to insure successful visits and audits

QC Decision Making for Operation

• Assist in determining priority of urgent items and appropriate action plan to effectuate priority.
• Drive all QC decision making in approve rejections and rework actions as recommended by Quality Control Technicians.

Additional Assignments

• Performs other duties and ad-hoc projects as assigned to drive growth, operational excellence and organization goals.

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

We are looking for a QC Analyst to join under CGT division. This role is responsible to conduct test and scheduling/ coordinating of testing with other departments to ensure timely delivery of results. This role is also required to perform peer review of laboratory data, support OOS and Deviation investigations.

Duties And Responsibilities

• Understanding and execution of Biochemical such as cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Conductivity, Appearance) as per USP, JP, and EP standards.
• Documentation and review of results in accordance with current Good Manufacturing Practices (cGMP).
• General lab support including housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.
• Support sample logistics area including retention sample storage, external lab test, QC documents control, shipment of QC samples.
• Prepare, maintain standards and reagents as required by GMP documents.
• Responsible to follow data integrity requirements.
• Actively contributes to operational efficiency/continuous improvement initiatives.
• Problem solving of analytical methods as well as troubleshooting of equipment. Involved in equipment qualification, maintenance and troubleshooting. Support / Perform OOS, deviation investigations. Draft investigations reports.
• Any other duties as assigned by your Supervisor/Manager

Education / Experience

• Degree/Diploma in a relevant Science field or Equivalent
• 2-4 years of QC experience, preferably in biotech, healthcare, or life sciences.
• Expertise in bioassays (ELISA, PCR, FACS) and ability to maintain quality standards while achieving results.
• Strong analytical and decision-making skills, with a desire to continuously learn and grow.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

• Monitor or observe operations to ensure that they meet production standards

• Recommend adjustments to the process or assembly

• Inspect, test, or measure materials or products being produced

• Measure products with rulers, calipers, gauges, or micrometers

• Accept or reject finished items

• Remove all products and materials that fail to meet specifications

• Discuss inspection results with those responsible for products

• Prepare report inspection and test data

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Perform inspections and tests on electrical and instrumentation systems, including cables, panels, field instruments, and control systems.
• Ensure installations and testing comply with approved drawings, project specifications, and relevant standards
• Prepare and review Inspection and Test Plans (ITPs), Method Statements, and Quality Control procedures.
• Maintain quality records, such as test reports, calibration certificates, and inspection checklists.
• Liaise with construction team, subcontractors, and corporate QMS department to address quality-related issues
• Support commissioning activities by ensuring all quality requirements are met before system handover
• Ensure compliance with industry standards, local regulations, and safety requirements
• Any other duties to be assigned from time to time

Pre-requsities

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in power or industrial plant construction projects
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Proficiency in inspection and testing of electrical and instrumentation systems
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project location: Jurong Island (Transport provided at designated pick-up points)

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Calling

· Perform regular quality assessment on all incoming materials from vendors, in-process fabrication as well as outgoing parts for shipping

· Reject all products and materials that fail to meet quality expectations

· Read mechanical drawings, plans and specifications to understand the requirements of product

· Measure product dimensions and compare final product to the specifications

· Maintain records of testing, information and various metrics e.g. number of defective products per day

· Monitor the use of measuring equipment to ensure it is safe and well-maintained

· Resolve quality-related issues in a timely manner

Your Success Factors

· Minimum 2 years of experience as quality inspector

· Minimum NTC certification in Precision/Mechanical Engineering or any other related fields

· Able to read mechanical drawings/blueprints

· Strong understanding of quality control standards and testing techniques

· Great attention to detail

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Calling

· Perform regular quality assessment on all incoming materials from vendors, in-process fabrication as well as outgoing parts for shipping

· Reject all products and materials that fail to meet quality expectations

· Read mechanical drawings, plans and specifications to understand the requirements of product

· Measure product dimensions and compare final product to the specifications

· Maintain records of testing, information and various metrics e.g. number of defective products per day

· Monitor the use of measuring equipment to ensure it is safe and well-maintained

· Resolve quality-related issues in a timely manner

Your Success Factors

· Minimum 2 years of experience as quality inspector

· Minimum NTC certification in Precision/Mechanical Engineering or any other related fields

· Able to read mechanical drawings/blueprints

· Strong understanding of quality control standards and testing techniques

· Great attention to detail

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

1. Job Requirements

A. Educational Qualification and Experience

• Diploma / Degree in Engineering or its equivalent
• 3 to 4 years’ related work experience testing, QA / QC and document control.
• Working experience of ISO 9001
• Understanding of engineering and processes.
• Previous laboratory and tensile testing experience advantageous.

B. Skills and Abilities

• Physically fit able to carry some parts.
• Good problem solving skills.
• Strong math including standard/units of measurement calculations
• Sense of initiative and able to work under minimal supervision or ability to work as a team.
• Working knowledge of machines, equipment, and processes.
• Resourceful and proactive; ability to work in a fast-paced environment
• Attention to Detail: Exceptional attention to detail and accuracy in all tasks.
• Analytical Skills: Strong analytical and problem-solving skills.
• Communication: Excellent written and verbal communication skills.
• Teamwork: Ability to work effectively both independently and as part of a team.

2. Key Responsibilities

• Conduct Internal and External Audits: Plan, execute, and report on external audits to ensure compliance with industry standards and regulations.
• Testing: Ensures product testing incoming and finished product to established standards/procedures;
• Certify, File and control in-house and third party certificates very accurately.
• Filing of all certificates and paperwork both hard and soft copies.
• Maintain complete history of client products in use.
• Liaise with third party surveyors on testing and certifications wherever necessary.
• Review work procedures and method statements for compliance with good work practices.
• Ensure compliance with all safety regulations when carrying out inspections.

Job Summary:

We are seeking a detail-oriented and experienced Quality Control (QC) Inspector/Officer to join our team. The ideal candidate will be responsible for ensuring that all products meet the company's quality standards through thorough inspections and testing. This role requires close collaboration with production, engineering, and warehouse teams to maintain compliance with internal policies and external regulations.

Key Responsibilities:

• Conduct inspections of raw materials, in-process products, and finished goods to ensure compliance with quality standards.
• Perform routine quality checks and maintain detailed records of inspections and test results.
• Identify and report any quality issues or non-conformities to the relevant departments.
• Implement corrective actions and preventive measures to address quality issues.
• Ensure that products comply with regulatory standards and customer requirements.
• Assist in maintaining and improving quality control processes and procedures.
• Collaborate with production teams to identify opportunities for improvement.
• Prepare and maintain QC documentation, including inspection reports, test certificates, and compliance records.

Requirements:

• Diploma or Degree in Quality Control, Manufacturing, or a related field.
• Previous experience in a QC role, preferably in a manufacturing or production environment.
• Familiarity with quality standards (e.g., ISO 9001, GMP).
• Strong attention to detail and excellent problem-solving skills.
• Good communication and teamwork skills.
• Basic computer skills (e.g., MS Office).
• Knowledge of safety regulations and best practices.

Preferred Qualifications:

• Experience with quality management systems (QMS).
• Certification in Six Sigma or other quality-related disciplines.
• Familiarity with industry-specific quality standards (e.g., HACCP for food, ISO 13485 for medical devices).

• Report daily to QNQC Coordinator/ Engineer and advise him on the client main contractor compliance to contract procedures and standards and any matters effecting quality
• Ensure documentation is clear, precise and accurate, and within the requirements of the applicable construction code and project specifications.
• Working knowledge of ASME SEC
• Perform visual inspection on welds for the following or as applicable
• Flag / identify any welds or items that require NDE to be completed, once completed, ensure this is documented, in case of any items that have had NDE completed and repairs are required
• Report and document internal & external Non-Conformances
• Perform field inspections and quality assurance of construction projects
• Provide daily construction reports and maintain up-to-date files of all construction documents
• Attend and participate in project meetings to keep Project Manager apprised of project progress, status, quality and schedule
• Identify and evaluate potential new observed hazards and implement controls as project's scope of work changes

Job Description

1. Ensure standard operating procedures (SOPs) is closely adhered to across organizational departments
2. Allocate quality activities, roles and responsibilities according to functional requirements and individual competencies
3. Ensure departments are operating in alignment with organization’s quality policies
4. Ensure that production work activities meet the required quality requirements
5. Conduct internal QMS audit on documentation where required and reporting of quality-related issues
6. Audit other departments' processes, SOPs and work areas for QA compliance
7. Audit vendors' compliance to organization’s and regulatory quality standards
8. Perform due diligence on vendor quality and to advise on contract renewals and/ or terminations
9. Plan regular internal inspections in accordance with relevant procedures
10. Ensure proper management of equipment and system qualification and validation
11. Execute required tests and inspections in accordance with inspection and test plans (ITPs)
12. Classify identified faults and prioritize corrective measures based on criticality of issues
13. Coordinate testing and commissioning work by team members and other departments
14. Coordinate with classification societies' and owners' representatives for relevant inspections
15. Facilitate continuous improvement of production quality by implementing corrective and preventative actions (CAPA) plans
16. Use quality monitoring data management systems to compile and track performance
17. Analyze quality assessment reports to identify gaps and improvements
18. Conduct transaction monitoring against quality criteria covering in-process quality oversights
19. Collaborate with the Procurement and Engineering departments to analyze the root cause of quality issues and implement quality improvement measures
20. Implement both short and long-term quality solutions in alignment with quality frameworks, policies and requirements
21. Escalate complex issues in improving work products and/or services quality to team members
22. Maintain up-to-date master lists and proper control of all released quality management system (QMS) documents
23. Ensure documents and record-keeping are in compliance with quality procedures for internal and external audits
24. Ensure quality documents related to the project are maintained regularly for final dossier compilation
25. Generate test and audit reports and present results to team members
26. Prefer immediate starter

About the Company:
Our client is one of the leading pharmaceutical ophthalmic solutions manufacturers in the world, dedicated in providing sterile pharmaceutical ophthalmologic solutions, from prevention to delivery of care at every touchpoint, advancing wellness in hospitals, clinics and home-care sectors.

Position Overview:
The incumbent works closely with the QC Manager on all aspects of Quality Control in the labolatory, in particular, on product reliability and compliance to all established product standards. Ensures that all aspects of quality within the organization is upheld.

Responsibilities:

• Able to provide guidance and coach lab technicians.
• The incumbent inspects all incoming raw material for compliance according to current standards.
• The incumbent conducts periodic checks and analysis on all WIPs.
• The incumbent retains finished product samples from production to conduct checks and analysis.
• Assist QA on failure analyses, corrective and preventive action response to customer’s complaint.
• Assist in GMP audits, validation, qualification and change control.
• Assist in maintaining Product Quality and Technical File.
• Write technical papers or reports or prepare standards and specifications for processes, products, or tests.

Requirements:

• Diploma/Degree in related field (Chemical Process Technology, Pharmaceutical, Chemistry, Biotechnology).
• Proven experience in the evaluation and validation of materials, products, or processes, adhering to regulatory standards.
• In-depth knowledge of the cGMP and ISO 13485.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

*We regret to inform that only shortlisted candidates will be informed.*

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027