Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Result Areas:

1. Manage the quality assurance and control of products and services to meet company and customers’ expectations.

Monitor QA/QC and proper documentation for incoming materials, fabrication, and production for

overseas projects

• Prepare inspection and test plans for façade works (Chart H)

• Prepare documents and procedures for inspection/certification

• Implement schedule to ensure QC Inspectors carry out their duties timely and correctly

• Assign proper checking tools for QC Inspectors

• Identify training opportunities for QC Inspectors to attain qualification and upgrade in their jobs

• Assign work checklist and test plan to QC Inspectors

• Organize and implement QMS and audit, including ISO

• Inspect the proper documentation and filing of QA/QC documents

• Search for source information related to QA/QC matters

2. Ensure the quality of products and services provided by suppliers and vendors

Analyse products and services provided by suppliers and vendors

• Inspect key material supplies such as aluminium, extrusions and glass

• Examine prototypes provided by suppliers and vendors

• Supervise the information of supplies in QA/QC systems and inspection records.

3. Attain high QA/QC in manufacturing and installation processes and methods.

• Analyse manufacturing and installation processes and methods

• Inspect method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

EDUCATIONAL QUALIFICATIONS

•General education/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 5 years of working experience in façade industry with good knowledge in product

specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality.

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Decisive

• Collaborative

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Calling

· Perform regular quality assessment on all incoming materials from vendors, in-process fabrication as well as outgoing parts for shipping

· Reject all products and materials that fail to meet quality expectations

· Read mechanical drawings, plans and specifications to understand the requirements of product

· Measure product dimensions and compare final product to the specifications

· Maintain records of testing, information and various metrics e.g. number of defective products per day

· Monitor the use of measuring equipment to ensure it is safe and well-maintained

· Resolve quality-related issues in a timely manner

Your Success Factors

· Minimum 2 years of experience as quality inspector

· Minimum NTC certification in Precision/Mechanical Engineering or any other related fields

· Able to read mechanical drawings/blueprints

· Strong understanding of quality control standards and testing techniques

· Great attention to detail

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Calling

· Perform regular quality assessment on all incoming materials from vendors, in-process fabrication as well as outgoing parts for shipping

· Reject all products and materials that fail to meet quality expectations

· Read mechanical drawings, plans and specifications to understand the requirements of product

· Measure product dimensions and compare final product to the specifications

· Maintain records of testing, information and various metrics e.g. number of defective products per day

· Monitor the use of measuring equipment to ensure it is safe and well-maintained

· Resolve quality-related issues in a timely manner

Your Success Factors

· Minimum 2 years of experience as quality inspector

· Minimum NTC certification in Precision/Mechanical Engineering or any other related fields

· Able to read mechanical drawings/blueprints

· Strong understanding of quality control standards and testing techniques

· Great attention to detail

PURPOSE

• Surveyors is to ensure all ISO Tank Containers turned into our depot are surveyed, cleaned and repaired to the customers requirement standard criteria comply to ITCO/ACC or owner criteria.

SCOPE

• Surveyors is to ensure all ISO Tank Containers that have been accepted by MW Tank Depot.

RESPONSIBILITY

• Surveyors is to ensure that all ISO Tank Containers turned into our depot must conduct surveyed.
• Surveyors’ responsibility for all the ISO tank containers turn into depot are thoroughly survey correctly and to ensure the documents are endorsed before issued the Equipment

JOB DESCRIPTION

• All ISO tank containers turn into depot, surveyors ensure to stick a yellow and red colour
• Sticker onto the Left-Hand Side of the corner post before off load.
• Surveyors must coordinate with the Leese/Lessor independent surveyor for joint inspection.
• As part of a Surveyors duties, ensure to conduct thorough inspection after the cleaning, repaired and testing completed.
• Surveyors must thoroughly inspect the Tank Containers and raised estimates after the cleaning completed.
• Surveyors must report to the supervisor on all documentation of ISO Tank containers before sending to customers
• Surveyors will conduct Pre/Post inspection, if require by Customers. (Before Repair and After Repaired)
• As a surveyors must obtain instruction from the Supervisor.
• Surveyors must inform the Side Lifter Drivers to shift the Tank Containers into the
• workshop area for repair when Customers given the approval to repair.
• Surveyors must hand over the approved estimates to the Repairer Supervisor afterthe tank containers shifted into the repair bay.
• Surveyors ensure the repairer repair items accordingly indicated on the estimates and repair standard complies to ITCO/ACC or Owner criteria.

KEY RESULT AREAS (KRA)

1. Inspect quality control of products and services to meet company and customers’ expectations.

• Inspect QA/QC and prepare proper documentation for incoming materials, fabrication, and production

and site installation

• Conduct QC inspection for façade works

• Prepare QC inspection documents and procedures for certification

• Execute QC inspection duties according to schedule in a timely and correct manner

• Perform QC inspection using proper checking tools as assigned

• Conduct QC inspection using work checklist and test plan as assigned

• Support in the inspection and implementation of QMS and audit, including ISO

• Prepare proper documentation and file QC inspection documents

2. Inspect quality of products and services provided by suppliers and vendors.

• Inspect products and services provided by suppliers and vendors

• Conduct QC on key material supplies such as aluminium, extrusions and glass

• Analyse prototypes provided by suppliers and vendors

• Maintain QC information of supplies in QA/QC Systems and Inspection Records

3. Perform stringent inspection to attain highQA/QC in manufacturing and installation processes and methods.

• Inspect manufacturing and installation processes and methods

• Perform method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

• Conduct QC field testing and maintain records

EDUCATIONAL QUALIFICATIONS

• Certificate/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 2–4 years of QA/QC working experience in façade industry with basic knowledge in

product specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality

• Familiar with ISO 9001, 14001 and 45001

• Familiarity with Construction Quality Assessment System (CONQUAS) will be an added

advantage

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Collaborative

• Effective communication skills

• Conscientious

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Duties And Responsibilities

• To prioritize and perform the various testing/analysis (bioburden, LAL, plating and counting techniques, microbial identification, EM tests i.e. air sampling, surface viable sampling, total particulate sampling etc.) in timely manner.
• Analysis of bulk product according to Standard Operating Procedures and Test Methods.
• Documentation of results in accordance with current Good Manufacturing Practices (cGMP).
• Problem solving of analytical methods as well as troubleshooting of equipment.
• Involvement in method transfers and validation.
• Involved in equipment qualification and technical selection of QC equipment and/or standards and reagents.
• Generation of required trending and reporting information, document revision and update.
• Support / Perform OOS, deviation investigations. Draft investigations reports.
• General lab support including housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.
• Any other duties as assigned by your Supervisor/Manager

Education / Experience

• Degree/Diploma in a relevant Science field or Equivalent
• 3– 5 years experience in Quality Control
• Strong knowledge of microbiological laboratory operations in a manufacturing environment
• Demonstrates an ability and desire to learn from experience
• Good problem solving and analytical skills

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Job Description

1. Ensure standard operating procedures (SOPs) is closely adhered to across organizational departments
2. Allocate quality activities, roles and responsibilities according to functional requirements and individual competencies
3. Ensure departments are operating in alignment with organization’s quality policies
4. Ensure that production work activities meet the required quality requirements
5. Conduct internal QMS audit on documentation where required and reporting of quality-related issues
6. Audit other departments' processes, SOPs and work areas for QA compliance
7. Audit vendors' compliance to organization’s and regulatory quality standards
8. Perform due diligence on vendor quality and to advise on contract renewals and/ or terminations
9. Plan regular internal inspections in accordance with relevant procedures
10. Ensure proper management of equipment and system qualification and validation
11. Execute required tests and inspections in accordance with inspection and test plans (ITPs)
12. Classify identified faults and prioritize corrective measures based on criticality of issues
13. Coordinate testing and commissioning work by team members and other departments
14. Coordinate with classification societies' and owners' representatives for relevant inspections
15. Facilitate continuous improvement of production quality by implementing corrective and preventative actions (CAPA) plans
16. Use quality monitoring data management systems to compile and track performance
17. Analyze quality assessment reports to identify gaps and improvements
18. Conduct transaction monitoring against quality criteria covering in-process quality oversights
19. Collaborate with the Procurement and Engineering departments to analyze the root cause of quality issues and implement quality improvement measures
20. Implement both short and long-term quality solutions in alignment with quality frameworks, policies and requirements
21. Escalate complex issues in improving work products and/or services quality to team members
22. Maintain up-to-date master lists and proper control of all released quality management system (QMS) documents
23. Ensure documents and record-keeping are in compliance with quality procedures for internal and external audits
24. Ensure quality documents related to the project are maintained regularly for final dossier compilation
25. Generate test and audit reports and present results to team members
26. Prefer immediate starter

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

About the Company:
Our client is one of the leading pharmaceutical ophthalmic solutions manufacturers in the world, dedicated in providing sterile pharmaceutical ophthalmologic solutions, from prevention to delivery of care at every touchpoint, advancing wellness in hospitals, clinics and home-care sectors.

Position Overview:
The incumbent works closely with the QC Manager on all aspects of Quality Control in the labolatory, in particular, on product reliability and compliance to all established product standards. Ensures that all aspects of quality within the organization is upheld.

Responsibilities:

• Able to provide guidance and coach lab technicians.
• The incumbent inspects all incoming raw material for compliance according to current standards.
• The incumbent conducts periodic checks and analysis on all WIPs.
• The incumbent retains finished product samples from production to conduct checks and analysis.
• Assist QA on failure analyses, corrective and preventive action response to customer’s complaint.
• Assist in GMP audits, validation, qualification and change control.
• Assist in maintaining Product Quality and Technical File.
• Write technical papers or reports or prepare standards and specifications for processes, products, or tests.

Requirements:

• Diploma/Degree in related field (Chemical Process Technology, Pharmaceutical, Chemistry, Biotechnology).
• Proven experience in the evaluation and validation of materials, products, or processes, adhering to regulatory standards.
• In-depth knowledge of the cGMP and ISO 13485.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

*We regret to inform that only shortlisted candidates will be informed.*

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Perform testing of petroleum products, refinery intermediate, process and effluent water
• Conduct sampling and testing of gases and LPG streams
• Perform QC/QA work including calibration and maintenance of equipment
• Perform stock-taking and reordering of chemicals and consumables

• Diploma in Science & Technology / Engineering or NITEC in Chemical Process Technology / Chemical & Life Science

Job Level & compensation offered may vary depending on candidates’ experiences and competencies.

Responsibilities:

• Assists co-workers and internal customers with interpretation of regulatory requirements (e.g., GLPs), SOP requirements, and other guidance documents, as applicable.
• Reviews data to ensure quality standards are met and to verify compliance to applicable SOP and regulatory requirements.
• Maintains working knowledge of client SOPs and requirements as applicable. Ensures that data reviewed meets applicable client SOPs and requirements.
• Performs regularly scheduled audits of departmental systems and supporting data, as applicable, to ensure proper documentation and maintenance (e.g. training files, client SOP reading lists, logbooks, etc.).
• Collects error tracking data for items reviewed and reports trends as feedback to the department.
• Monitors citation trends in eQA and performs follow-up actions with respondents, management, or others, if needed, to prevent recurring citations, problems, or errors.
• Promotes quality and regulatory compliance within the department by working with operations and scientific staff to resolve service/quality issues, serving on a committee, assisting with the development of training programs related to documentation and quality, or other related involvement.
• Notifies management of observed quality/compliance issues and service failures.
• Participates in quality improvement opportunities and harmonization efforts to promote best practices.
• Participates in project debrief meetings as needed.
• Facilitates changes to SOPs, policies, training materials, and other documents as applicable.
• Completes self-development opportunities.
• Performs other related duties as assigned.

Requirements:

• Bachelor of Science/Arts (BS/BA) degree.
• Min. 2 years of laboratory, data review, or related experience.
• Ability to efficiently use basic software (e.g., Word, Excel, PowerPoint).

Roles & Responsibilities

• Plan, coordinate, and execute quality assurance and control activities for projects, ensuring compliance with contract specifications.
• Ensure quality assurance and control across projects
• Maintain regulatory compliance and safety standards
• Liaise with suppliers and subcontractors to ensure quality control and adherence to standards.
• Facilitate off-site inspections, sampling, and testing of materials.
• Compile QA/QC record for submission to Client

Requirements

• Diploma in Civil Engineering or its equivalent
• StEr will be great advantage
• At least 4-year related working experience
• Welding inspection certificate (CSWIP 3.1) is an advantage
• Able to work in a team

About the Company:
Our client is one of the leading pharmaceutical ophthalmic solutions manufacturers in the world, dedicated in providing sterile pharmaceutical ophthalmologic solutions, from prevention to delivery of care at every touchpoint, advancing wellness in hospitals, clinics and home-care sectors.

Position Overview:
The incumbent works closely with the QC Manager on all aspects of Quality Control in the labolatory, in particular, on product reliability and compliance to all established product standards. Ensures that all aspects of quality within the organization is upheld.

Responsibilities:

• Able to provide guidance and coach lab technicians.
• The incumbent inspects all incoming raw material for compliance according to current standards.
• The incumbent conducts periodic checks and analysis on all WIPs.
• The incumbent retains finished product samples from production to conduct checks and analysis.
• Assist QA on failure analyses, corrective and preventive action response to customer’s complaint.
• Assist in GMP audits, validation, qualification and change control.
• Assist in maintaining Product Quality and Technical File.
• Write technical papers or reports or prepare standards and specifications for processes, products, or tests.

Requirements:

• Diploma/Degree in related field (Chemical Process Technology, Pharmaceutical, Chemistry, Biotechnology).
• Proven experience in the evaluation and validation of materials, products, or processes, adhering to regulatory standards.
• In-depth knowledge of the cGMP and ISO 13485.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

*We regret to inform that only shortlisted candidates will be informed.*

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

• Location: Boon Lay
• $2300 - $2500
• 5.5 Days Alt - 8am to 5pm, 8am to 12pm
• Perm Role

Job Scope:

• Perform routine quality checks on raw materials, in-process products, and finished
  goods.
• Assist in monitoring production processes to maintain quality control and food safety
  guidelines.
• Assist in internal/ external and regulatory audits.
• Prepare and maintain relevant food safety records.
• Assist with maintaining quality documentation, ensuring all records are up-to-date and
  accurate.

Requirements:

• Diploma in Food Science / Technology or similar
• Min 1 year experience in QA/ QC role
• Singaporean Only

Kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

EA Reg. No: R1880058 | Dylan

• Perform QC inspection in accordance to product specification as per customer and company's standard.
• Perform checks on all incoming goods or returns from customers, and complete necessary records.
• Coordinate with Inventory Team to arrange the goods are being stored at the correct chillers.
• Perform quality checks during picking and packing process, as well as before delivery to customers.
• From time to time, inspect the goods in the chiller.
• Highlight any non-conformity to the Supervisors for investigation and corrective action.
• Support the ISO 22000 documentation.
• Any ad-hock job as assign by Manager.

Requirement/Skills:

1. Prior QC experience is value added.

2. Training will be provided.

3. Vegetable and Fruit lovers are welcomed.

4. Able to commit 5.5 days work week

Reporting to QC Manager.

Responsibilities:

• Work independently to ensure the assigned task for raw materials, in-process, utility, milk powder samples are tested in a timely manner to meet TAT, according to established test methods, technology and quality requirements to provide accurate results. Be able to assist the senior chemist or lab manager to assign the routine task within team. Flexible to work over time where is required.
• Good understanding of GLP, GDP, GMP and ISO17025 standard for working in laboratory to maintain the laboratory activities comply to these standards.
• Carry out the nutrients test by operation of the critical laboratory instrument such as HPLC, ICPMS and GC as well as the instrument basic maintenance.
• Strong knowledge on the Root Cause Analysis to support the OOS/deviations/atypical results/invalid results investigation. Be able to the lead investigation. As at least one SME for lab testing or instrumentation.
• Good understanding of TUAS QC KPIs and be able to update the performance within the team monthly in a timely manner.
• Monitor the chemistry lab expense vs the budget. Identify and implement the productivity projects to reduce the unnecessary expense and increase the laboratory efficiency such as reduced testing, rapid method etc. Involve the chem lab yearly budget activities
• Good knowledge of the Method Verification and Method Validation protocol and report write up and execution.
• Ensure the current, complete, legible notebooks and laboratory records are maintained in compliance with good laboratory practices.
• Good knowledge in lean lab concept and actively involve or lead the continuous improvement project to improve the laboratory test efficiency and productivity.
• Look after the good inventory of QC materials such as media, reagents, chemicals and consumables to support testing.
• Use GLIMS laboratory data management system effectively to manage the laboratory generated data. Be able to use GLIMS to retrieve the results to support the data trending and investigation purpose.
• Lead and maintain the housekeeping standard of laboratory, work area and equipment (e.g. practice 5S), observe safety requirements and Good Laboratory Practice in the laboratory which is compliant with company and regulatory standards.
• Proactively monitor quality trends and abnormalities and timely keep management and other departments informed of quality issues as appropriate to enable immediate corrective action. Be able to do the preliminary investigation of the abnormalities observed.
• Write and/or revise the QC SOP/WI.

Requirements:

• Degree holder at analytical chemistry, food science or related with at least 3 years working experience in milk powder manufacturing.
• Hands on experience on chemistry laboratory testing technology and instruments such as HPLC, GC, ICPMS etc preferably test nutrients in milk powder product using these instrument.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To provide technical support to routine testing teams in the frame of the Analytical Science and Technology (ASAT) team around method development/ qualification/ validation/ verification and equipment qualification

Key Responsibilities:

• Technical responsibilities
• Manages and implement method development/ qualification/ validation/ verification and equipment qualification required by routine testing team, including but not limited to new equipment, material and method introduction and compendial updates
• Keeps up-to-date on regulations/ development of biopharmaceutical QC activities to ensure QC operations are in compliance to applicable corporate, regulatory and external agency regulations
• Leads/ manages investigation of non-conformities (events and deviations) and complex tasks (e.g. continuous improvements, department/ site projects and initiatives)
• Knowledge management on knowledge retention and effective training to ensure methods/ knowledge are effectively transferred to routine testing team
• Writes/ reviews change controls, events/ deviations, CAPAs and GMP documents (e.g. SOP, protocols, reports)
• Provides technical expertise and consultation to routine testing team on technical matters to ensure compliance to applicable corporate, regulatory and external agency regulations
• Subject-Matter-Expert (SME) audit fronter for assigned topics
• Supports local compendium system
• Performs review of compendium updates timely and accurately.
• Supports investigation system in QC
• Performs trends for invalids, atypical results and OOS
• Problem Identification and Solving:
• Identifies and reports problems in QC.
• Recommends and coordinates a ro riate corrective actions as necessary
• Organization and Management Responsibilities
• Works with senior specialists/ chemists and manager to create a culture of accountability, ownership and continuous improvement
• Respects all safety and security polices, laboratory policies and practices on site
• Ensures expenditures are within budget
• Works across boundaries across departments and/or sites
• Works with senior specialists/ chemists and manager to align the priorities of the team with those of the department
• Able to work independently, shows initiative and able to work with all levels of staff
• Provides adequate guidance and technical support to other team when necessary
• Decision Making
• Proposals & Recommendations
• Based on experience & knowledge of work
• Proposal of CAPA for any issues/ deviations/ exceptions/ risks
• Proposal of QC improvement projects and strategies
• Team training and development

Skills:

Professional

• University degree in a relevant Science discipline with at least 2 years of working experience or Diploma with at least 5 years of working experience

Technical

• Competent technical skills in the followings:
• Common laboratory techniques (advantage)
• Laboratory equipment qualification (advantage)
• Method validation (advantage)
• Computer system validation Knowledge of cGLP & cGMP
• Preferably with knowledge of statistics (advantage)
• Preferably with knowledge of compendium (advantage)
• Preferably with knowledge of QC laboratory investigation (advantage)

Business

• Effective report writing skills
• Planning and Organizing skills
• Good interpersonal and communication skills
• Effective team player
• Analytical skills with logical thinking Problem solving skills

Competencies:

• Good command of English
• Good knowledge of Microsoft office
• Attributes required of the job e.g. the ability to work independently; the ability to work in a team; shows initiative; able to work with all levels of staff Competencies must consider the key responsibilities, scope of accountabilities and required experience

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Degree in engineering or a related field.

Minimum 3 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.