職責：

• • 識別並創造銷售機會，以滲透零件銷售和主要現有產品的新客戶
  • 為公司客戶提供服務並管理整個銷售週期
  • 跟進客戶詢問
  • 與客戶建立牢固且可持續的關係
  • 任何其他指派的臨時職責

要求：

• • 工程文憑（任何）
  • 歡迎應屆畢業生
  • 優先考慮至少1年工作經驗
  • 技術傾向，有半導體產業銷售經驗者優先
  • 雙語，具有良好的溝通能力（口頭和書面）
  • 良好的演講技巧
  • 出國旅行的意願

好處

• • 5天工作
  • 運輸索賠
  • 手機索賠
  • 醫療保險
  • 年假、醫療假、兒童照顧/家庭護理假

Responsibilities:

• Identify and create sales opportunity to penetrate new accounts for parts sales and main existing products
• Service corporate accounts and manage full sales cycles
• Follow up with customer enquiries
• Build strong and sustainable relationships with customer
• Any other ad hoc duties assigned

Requirements:

• Diploma in Engineering (any)
• Fresh grads are welcome
• Prefer at least 1 year working experience
• Technically incline with Sales Experience in Semiconductor Industry are preferred
• Bilingual with good communication skills (verbal & written)
• Good presentation skills
• Willingness to travel oversea

Benefits

• 5 days work
• Transport claim
• Handphone claim
• Medical insurance
• Annual, Medical, Childcare/Family care leave

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams on the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practises.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree or Diploma in relevant discipline.
• Minimum 3 years of experience in construction/ civil engineering industry.
• Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential.
• Have experiences in working in large scale projects.

• To plan, coordinate and execute quality assurance and quality control of project
• To ensure all products are executed in accordance to contract specifications
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• Any other ad-hoc duties as and when assigned

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

• To plan, coordinate and execute quality assurance and quality control of project
• To ensure all products are executed in accordance to contract specifications
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• Any other ad-hoc duties as and when assigned

Requirements

• At least 5 years experience in LTA MRT Projects

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Roles & Responsibilities:

• Establishing work procedures, instructions and monitor performance and control of workmanship towards quality.
• Ensure sub-contractors and suppliers comply with project’s QA/QC requirement and manage project quality to ensure compliance to codes, standards and regulations.
• Carry out audit processes, review procedures, and ensure compliance with industry standards.
• Carry out various inspections and tests on the materials, products and components during various stages and completion of construction.
• Identify areas for process improvements, implement best practices and ensuring ongoing compliance.
• Maintain records of inspection results, deviations and corrective actions taken to ensure traceability and accountability.
• Initiate corrective actions to resolve the issue and prevent recurrence when defects or non-conformities are found.
• Review client’s complaints relating to QA/QC matters.
• Preparing and maintaining detailed reports on quality performance.

Requirements:

• ITE / Diploma in engineering or equivalent.
• At least 5 years of working experience in the local construction industry.
• Good communication and interpersonal skills.

• Reports to Construction Manager
• Ensure the quality of all construction work performed on site are in accordance with the company's QA/QC requirement
• Visit project sites, arrange and conduct QA/QC inspections
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice
• Ensure that all project quality records and quality audit plans are maintained.
• Prepare inspection & test plans/check list for site activities Review inspection and testing reports
• Propose corrective action and ensure and timely and effectively carried out to rectify
• Oversee delivery inspection of project materials
• Review, approve and maintain QA/QC related documentation and carry out other duties as assigned

Job Requirements:

• Diploma/Degree in Architectural or Civil / Structural Engineering
• At least 6 years of relevant site project experience in QA/QC roles for construction projects
• Familiar with Singapore Codes and Practices
• Experience with CONQUAS
• Experience with Constructability Score
• Experience with Green Mark Certification
• Able to liaise with workers/Clients, Consultant, Main Con colleagues, subcon and suppliers on QA/QC works and protocols at site
• Location : Punggol (Near MRT)
• Project : Sports Centre

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Oil & Gas manufacturing company.

• Working days: 5 days
• Location: Tuas, shuttle provided

Job Scopes:

• Conduct dimensional inspections based on order specifications or drawings using various measuring tools, including bore gauges, depth gauges, vernier calipers, dial indicators, surface roughness testers, OD/ID micrometers, ultrasonic gauges, and more.
• Interpret dimensional and geometrical requirements from drawings and select the appropriate measuring instruments for accurate inspection.
• Perform inspections for incoming and outgoing materials as needed, covering dimensional, length, visual, and Brinell hardness checks.Prepare materials for hardness testing.
  - Carry out Rockwell hardness tests and apply markings when required.
  - Maintain material traceability at all times to ensure proper documentation and accountability.
• Handle any other ad hoc tasks assigned by the QC Team Lead or Quality Manager.

Requirements:

• Proficient in operating measuring instruments
• Capable of understanding dimensional and geometrical specifications in technical drawings.
• At least 2 years of QC experience

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Job Title: QC(ID4322)
Location: Bedok
Working Hours: 1st Shift - 7am-3.45pm.2nd Shift - 2.15pm-11pm,3rd Shift - 10.15pm-7am
Salary: 1st Shift :$1500, 2nd Shift : $1650, 3rd Shift : $1800
Candidates can choose shift.

Job Responsibilities:
• Perform day to day inspection, include incoming, in-process, outgoing inspection
• Responsible for visually inspecting incoming materials, first piece, in process and finished goods,
• Maintain appropriate records to comply with the company and customer documentation requirements.
• Handle Engineering Change Document
• Perform other duties as assigned

Requirement
• On job training will be provided
• Able to work overtime if required

• Monitor or observe operations to ensure that they meet production standards

• Recommend adjustments to the process or assembly

• Inspect, test, or measure materials or products being produced

• Measure products with rulers, calipers, gauges, or micrometers

• Accept or reject finished items

• Remove all products and materials that fail to meet specifications

• Discuss inspection results with those responsible for products

• Prepare report inspection and test data

The Opportunity:

Responsible for providing supervision of inspection process and staff. Ensure staffing levels and work assignments meet facility requirements. Assist in the administration of the Quality Assurance (QA) and Quality Control (QC) programs and ensure compliance with the Quality Manual as well as all applicable regulations and standards for which Therapak/VWR is certified to. Perform acceptance activities as required to ensure Company objectives are met. May provide oversight to lower-level supervisor(s).

What we are looking for:

• Bachelor’s degree in chemistry, Biology, Biochemistry or science related field
• 5 years of related/applicable lab experience; minimum 1 year of supervisory experience
• Required language(s): English
• Required Skill(s): MS Office (Words, Excel and Access)
• Ability to work in a team environment
• Ability to identify and resolve issues
• Ability to lead a team and provide guidance
• Strong decision-making and communication skills
• Strong interpersonal and organizational skills

How You Will Thrive and Create an Impact:

Supervision of QC Associates

• Directly supervises the quality control associates, monitor individual skills, technique and abilities for most efficient operation.
• To follow progress of work; anticipate or investigate delays or inadequate performance by taking corrective action within limits of established practice and aid other departments as needed.
• Provides on the floor and technical support to quality control associates with guidance and improve the quality system, regulatory policies and procedures.

Drive QC Operation and Laboratory Operational Excellence

• Support and enforce the quality management system related to QC, regulatory policies and work instructions.
• SAP account holder for method creation, support QC data input and release, inspection plans and reports creation to ensure the process flow is smooth.
• Oversee quality and quantity of all QC laboratory output and testing timelines by monitoring testing duration, arrange for equipment, materials and supplies to be available for QC testing
• Oversee that equipment is given proper care; troubleshoot faulty operations to determine cause and arrange for required repair and maintenance which could affect operational testing needs

Drive continuous QC training and development

• Provide or arranges for training and cross training to employees in the performance of duties by assisting and instruct personnel as necessary to insure proper flow of work through department.
• Provide guidance to all level Technicians including test methods, analytical technique, good laboratory practice, paperwork completion, equipment, schedule interpretation, and LIMS support.

Maintain QC Document Control and lead in investigation

• Review and approval of controlled Quality Control documents including but not limited to specifications, procedures, work instructions, validation protocols, equipment software audit trials, stability worksheets, data integrity logs and validation reports.
• Ensure department documents and procedures are up to date and reflect current practice; revising procedures & processes when needed.
• Performs investigations for laboratory out of specification (OOS), out of trend (OOT) questionable results, quality event, CAPA and complaint related to testing, safety related incidents and/or processes related to the QC laboratory.

Maintain Quality, Regulatory and Safety Compliance

• Understands regulatory requirements for 21 CFR 820, ISO 17025, EXCiPACT, GLP, GMP including USP/EP/BP/JP/ChP general practices and procedures.
• Proactively maintains current industry and regulatory knowledge for medical devices, ISO 17025, GMP principles and current analytical methodology.
• Enforce prescribed local safety rules and regulations related to QC laboratory; insure that work areas are maintained in a neat and orderly condition in the work environment; to perform safety and security procedures to open and close buildings and facilities.

Customer Centric

• Work with external customers, regulatory agents and vendors during audits and site visits.
• Work and collaborate with internal stakeholders to insure successful visits and audits

QC Decision Making for Operation

• Assist in determining priority of urgent items and appropriate action plan to effectuate priority.
• Drive all QC decision making in approve rejections and rework actions as recommended by Quality Control Technicians.

Additional Assignments

• Performs other duties and ad-hoc projects as assigned to drive growth, operational excellence and organization goals.

Job Responsibilities:

• Conduct daily QC Inspection (weight, quantity, metal detector, packaging check, date code, collect samples for microbial test) to ensure that all finished products are meeting internal quality standards.
• Conduct GMP and personal hygiene inspection.
• Check and ensure all CCPs and CPs are properly controlled and monitored.
• Conduct daily and weekly sensory evaluation for finished products.
• Conduct building and facility checks with Facility Team, submit report and ensure actions taken for issues brought up.
• Conduct Incoming Raw material quality check for Flour and Oil (Visual, Moisture, COA etc.).
• Manage daily sampling for finished products including planning, collection, labelling, input of data and organoleptic test.
• Conduct environment monitoring including air test, hand and protect coat swab, equipment and packaging TPC swab as per schedule.
• Conduct incoming imported goods physical inspection and record any non-conforming products.
• Key-in and release raw materials and finished products from SAP System.
• Other tasks as required and delegated by QC Executive.

Job Requirement:

• Diploma/Degree in Food Science or Food Technology or related fields
• Fast learner and independent
• Interest for food industry is preferred
• Singaporean only

Work location: 1 or 5 Senoko Road

Contractual Work timing: Mon - Thu 8am - 6pm, Fri 8am - 5pm.

(Successful candidate will be given priledged shortened workweek Mon - Friday 8 am to 5 pm)

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Calling

· Perform regular quality assessment on all incoming materials from vendors, in-process fabrication as well as outgoing parts for shipping

· Reject all products and materials that fail to meet quality expectations

· Read mechanical drawings, plans and specifications to understand the requirements of product

· Measure product dimensions and compare final product to the specifications

· Maintain records of testing, information and various metrics e.g. number of defective products per day

· Monitor the use of measuring equipment to ensure it is safe and well-maintained

· Resolve quality-related issues in a timely manner

Your Success Factors

· Minimum 2 years of experience as quality inspector

· Minimum NTC certification in Precision/Mechanical Engineering or any other related fields

· Able to read mechanical drawings/blueprints

· Strong understanding of quality control standards and testing techniques

· Great attention to detail

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, aerospace, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Calling

· Perform regular quality assessment on all incoming materials from vendors, in-process fabrication as well as outgoing parts for shipping

· Reject all products and materials that fail to meet quality expectations

· Read mechanical drawings, plans and specifications to understand the requirements of product

· Measure product dimensions and compare final product to the specifications

· Maintain records of testing, information and various metrics e.g. number of defective products per day

· Monitor the use of measuring equipment to ensure it is safe and well-maintained

· Resolve quality-related issues in a timely manner

Your Success Factors

· Minimum 2 years of experience as quality inspector

· Minimum NTC certification in Precision/Mechanical Engineering or any other related fields

· Able to read mechanical drawings/blueprints

· Strong understanding of quality control standards and testing techniques

· Great attention to detail

Today, Lonza is a global leader in life sciences operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

We are looking for a QC Analyst to join under CGT division. This role is responsible to conduct test and scheduling/ coordinating of testing with other departments to ensure timely delivery of results. This role is also required to perform peer review of laboratory data, support OOS and Deviation investigations.

Duties And Responsibilities

• Understanding and execution of Biochemical such as cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Conductivity, Appearance) as per USP, JP, and EP standards.
• Documentation and review of results in accordance with current Good Manufacturing Practices (cGMP).
• General lab support including housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.
• Support sample logistics area including retention sample storage, external lab test, QC documents control, shipment of QC samples.
• Prepare, maintain standards and reagents as required by GMP documents.
• Responsible to follow data integrity requirements.
• Actively contributes to operational efficiency/continuous improvement initiatives.
• Problem solving of analytical methods as well as troubleshooting of equipment. Involved in equipment qualification, maintenance and troubleshooting. Support / Perform OOS, deviation investigations. Draft investigations reports.
• Any other duties as assigned by your Supervisor/Manager

Education / Experience

• Degree/Diploma in a relevant Science field or Equivalent
• 2-4 years of QC experience, preferably in biotech, healthcare, or life sciences.
• Expertise in bioassays (ELISA, PCR, FACS) and ability to maintain quality standards while achieving results.
• Strong analytical and decision-making skills, with a desire to continuously learn and grow.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Precision Engineering Company

• Location: Potong Pasir
• Working day: 5 days

Job Scopes:

• Perform dimensional inspections using tools such as calipers, micrometers, measuring scopes, and coordinate measuring machines (CMM).
• Verify the accuracy of components and products against technical drawings and specifications.
• Document inspection results and maintain accurate records for traceability.
• Collaborate with the production team to identify and address quality issues.
• Follow and enforce quality control standards and procedures.

Requirements:

• Minimum of 2 years of experience in QC dimensional inspection, preferably in precision jobs.
• Proficiency in using calipers and micrometers.
• Basic knowledge of measuring scopes and CMM is preferred (training can be provided).

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

• Track conformity certificates, calibration certificates, and plant calibration certificates from external agencies while maintaining the RIN Register and coordinating with QPS for closure.
• Ensure full compliance of all sub-contractors with the relevant LTA M&W requirements and preparing and submitting weekly and monthly quality reports.
• Oversee QPS inspections and key activities while ensuring presence during asphalt works for road diversions.
• Review shop drawings, coordinating design issues, inspecting new and in-use molds, and managing material orders.

Requirements:

• Degree in Civil Engineering/ Mechanical Engineering or equivalent.
• At least 3 years of experience in doing QA/QC for LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Track conformity certificates, calibration certificates, and plant calibration certificates from external agencies while maintaining the RIN Register and coordinating with QPS for closure.
• Ensure full compliance of all sub-contractors with the relevant LTA M&W requirements and preparing and submitting weekly and monthly quality reports.
• Oversee QPS inspections and key activities while ensuring presence during asphalt works for road diversions.
• Review shop drawings, coordinating design issues, inspecting new and in-use molds, and managing material orders.

Requirements:

• Degree in Civil Engineering/ Mechanical Engineering or equivalent.
• At least 3 years of experience in doing QA/QC for LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740