PURPOSE

• Surveyors is to ensure all ISO Tank Containers turned into our depot are surveyed, cleaned and repaired to the customers requirement standard criteria comply to ITCO/ACC or owner criteria.

SCOPE

• Surveyors is to ensure all ISO Tank Containers that have been accepted by MW Tank Depot.

RESPONSIBILITY

• Surveyors is to ensure that all ISO Tank Containers turned into our depot must conduct surveyed.
• Surveyors’ responsibility for all the ISO tank containers turn into depot are thoroughly survey correctly and to ensure the documents are endorsed before issued the Equipment

JOB DESCRIPTION

• All ISO tank containers turn into depot, surveyors ensure to stick a yellow and red colour
• Sticker onto the Left-Hand Side of the corner post before off load.
• Surveyors must coordinate with the Leese/Lessor independent surveyor for joint inspection.
• As part of a Surveyors duties, ensure to conduct thorough inspection after the cleaning, repaired and testing completed.
• Surveyors must thoroughly inspect the Tank Containers and raised estimates after the cleaning completed.
• Surveyors must report to the supervisor on all documentation of ISO Tank containers before sending to customers
• Surveyors will conduct Pre/Post inspection, if require by Customers. (Before Repair and After Repaired)
• As a surveyors must obtain instruction from the Supervisor.
• Surveyors must inform the Side Lifter Drivers to shift the Tank Containers into the
• workshop area for repair when Customers given the approval to repair.
• Surveyors must hand over the approved estimates to the Repairer Supervisor afterthe tank containers shifted into the repair bay.
• Surveyors ensure the repairer repair items accordingly indicated on the estimates and repair standard complies to ITCO/ACC or Owner criteria.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Job Description :

• Project management and daily operations including inspections, handover, site measurements, project management.
• Prepare submission of shop drawing, method statement, progress claims and project management reports.
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications.
• Ensure environmental, safety and health practices are carried out at all times.

Requirements :

• Candidate must possess at least a Diploma / Bachelor's Degree in Civil Engineering or its equivalent.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Min. 5 years of working experience in Construction Industry are preferred.
• Strong analytical and communication skills.

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Roles & Responsibilities

Plan, lead and supervise upgrading works, addition and alteration works

Lead a team of supervisors and workers and oversight of manpower for project execution

Ensure designs / drawings meet relevant code and compliance requirements, and good engineering practices

To attend site matters / discussions to resolve technical / site issues and progress matters

Continuing to improve all installation works schedule and quality of work through proper planning of work method, materials procurement and selection, and efficient site management

Monitor and control project schedule, materials delivery and budget etc

Liaise coordinate with clients, consultant, project supervisors and sub-contractors on project related issues and to ensure project objectives are met

To supervise and ensure works are in accordance to the contract drawings and specifications

Establish and maintain a detailed tracking and filing system of all documents

To prepare, submit Variation Claims with instruction documents & part-plan from client

Maintain all filing systematically & uploading of softcopies in the system

To place materials order to Purchaser in advance as per Order list as per site requirement

Responsible for ensuring implementing safety measures

Only qualified candidates will be notified for interviews.

Job Description:

• Conduct preventive, corrective maintenance & installation on monitoring systems, minimizing downtime and ensuring optimal system functionality.
• Proficiently interprete engineers' 2D drawings provided by Design engineer, ensuring accurate assembly procedures.
• Execute hands-on machine assembly setups, demonstrate precision and attention to details throughout the process.
• Conduct panel wiring for product testing, ensuring functionality and adherence to specifications.
• Possess extensive knowledge in wiring AC/DC, relay systems and PLC, contributing to efficient and reliable system operations.
• Apply expertise in panel and PLC wiring setups at production lines, ensuring seamless integration and functionality.
• Employ observational analysis to identify root causes of operational issues in devices, contribute to efficient problem-solving strategies.

• Identifying deficiencies in mechanical processes and developing improvements

• Designing and developing prototypes

• Analyzing and testing prototypes and each revision of a device

• Supervising the development of computer-aided design (CAD) project drawings from junior team members

• Developing, initiating and managing all phases of projects

• Preparing documentation of critical analysis and providing suggestions for correcting errors

• Collaborating with Production Managers for proper allocation and tracking of resources

Job Description

Overall Job Summary

The incumbent is responsible to provide support in the day-to-day overall HR and office administration functions, including handling of administering pay and employee benefits, recruitment and selection, training and development, updating of HR policies and procedures, employee relations and administrative matters.

Responsibilities and Duties

• Advertise, search and schedule candidates for interview
• Process clients’ monthly payroll and CPF
• Manage end-to-end process of on boarding and off boarding of employees
• Handle EP, work pass application, renewal, and cancellation
• Support daily administration/operations matters
• Other admin duties assigned by the Manager

Job Requirements

• Minimum 2 years of relevant HR experience with a diploma / degree in Human Resources Management or equivalent.
• Possess effective verbal and written communication skills.
• Resourceful, initiative, self-motivated, diplomatic and people-oriented.
• Good team player and yet able to work independently with minimal supervision.
• Ability to multi-task with good time management skills.
• Proficient in Microsoft Word, Excel, Power-point and IT savvy.
• Experience with Opensoft and Success Factors HRIS software will be an added advantage.
• Able to commence employment within short notice.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

· Be part of a team in the implementation of Nationwide Mobile Network

· Preparation of proposals and documentation according to project standards

· Conduct site works, such as survey, site meetings, site handover

· Perform Commissioning and Integration of communication equipment

· Perform Coverage Walk Test and upload data for processing

· Competent to carry out troubleshooting with on-job training

· Coordinate with installation teams on site requirements and progress

· Update of site status

· Ensure Compliance with workplace safety, health and other regulatory requirements

Requirements

• Diploma in Electronics/ Mechatronics/ Electrical/ Communication Engineering or related discipline.
• Cad Software knowledge is an added advantage.

Job Title: Engineer

● Key Responsibilities

- Responsible for preparing schematic/assembly drawings, vehicular calculation and technical documentation for projects.

- Hands-on for vehicular dimensions measurement.

- LTA submission.

- Engineering support and correspondence to vehicular projects.

- Other ad-hoc tasks assign by Head of Engineering.

● Safety and Compliance:

- Ensure compliance with safety regulations and company policies.

- Conduct risk assessments and implement safety improvements.

● Collaboration:

- Work closely with sales, production, aftersales teams.

● Requirements:

- Candidate possess at least Diploma in Engineering (Mechanical / Mechatronic) or equivalent.

- Minimum one of experience in a manufacturing environment, preferably in vehicular or related industries.

- Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

- Proficient in mechanical structural calculation

- Advantage if candidate has experience and familiar with quality management systems
(e.g., ISO 9001, ISO45001).

● Desired Quality:

- Have analytical thinking skills.

- Can work well with others.

- To be flexible and open to company workflow changes.

- Strong problem-solving, communication, and project management skills.

- Ability to work in a desk/factory environment and prioritize multi-tasking.

- Self starter

- Willing to learn

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

KEY RESULT AREAS (KRA)

1. Inspect quality control of products and services to meet company and customers’ expectations.

• Inspect QA/QC and prepare proper documentation for incoming materials, fabrication, and production

and site installation

• Conduct QC inspection for façade works

• Prepare QC inspection documents and procedures for certification

• Execute QC inspection duties according to schedule in a timely and correct manner

• Perform QC inspection using proper checking tools as assigned

• Conduct QC inspection using work checklist and test plan as assigned

• Support in the inspection and implementation of QMS and audit, including ISO

• Prepare proper documentation and file QC inspection documents

2. Inspect quality of products and services provided by suppliers and vendors.

• Inspect products and services provided by suppliers and vendors

• Conduct QC on key material supplies such as aluminium, extrusions and glass

• Analyse prototypes provided by suppliers and vendors

• Maintain QC information of supplies in QA/QC Systems and Inspection Records

3. Perform stringent inspection to attain highQA/QC in manufacturing and installation processes and methods.

• Inspect manufacturing and installation processes and methods

• Perform method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

• Conduct QC field testing and maintain records

EDUCATIONAL QUALIFICATIONS

• Certificate/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 2–4 years of QA/QC working experience in façade industry with basic knowledge in

product specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality

• Familiar with ISO 9001, 14001 and 45001

• Familiarity with Construction Quality Assessment System (CONQUAS) will be an added

advantage

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Collaborative

• Effective communication skills

• Conscientious

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

Responsibilities:

1. Mandatory Reporting & Compliance (ECA, WEMP, GHG, etc.)

• Prepare and submit Energy Management System (EnMS) reports.
• Ensure compliance with Minimum Energy Efficiency Standards (MEES) for water-cooled chilled water systems.
• Update and submit the Energy Efficiency Improvement Plan (EEIP) and Energy Reports as per regulatory requirements.
• Conduct annual energy reviews and support ISO50001 certification processes.
• Monitor and report water usage including recycling and reuse systems.
• Analyze GHG emissions data monthly and prepare yearly submissions for third-party verification.
• Report on Corporate Environmental Performance Management (CEPM) and align with Net Zero and Renewable Energy targets.

2. Corporate Environmental & Sustainability Initiatives:

• Track and report environmental indicators such as power, water, and waste consumption.
• Develop gap analyses and enhancement plans to improve eco-efficiency and recycling rates.
• Support corporate audits and sustainability projects, and environmental goal tracking.

3. Facility Monitoring & Data Management:

• Integrate facility monitoring systems into the Maintenance Management System (IFMS Dashboard).
• Develop automated preventive maintenance schedules and inventory tracking.
• Oversee daily monitoring logs and production support using SharePoint for data analysis and reporting.

Requirements:

• Degree in Environmental Science, Sustainability, Engineering, or a related Engineering field.
• Proven experience in Energy Management, Environmental Sustainability, and Corporate Responsibility reporting.
• Strong technical skills in data analysis, with proficiency in tools such as BMS, SharePoint, and digital metering systems.
• Excellent communication and reporting skills with attention to detail.
• Experience in maintenance management systems and facility monitoring tools.
• Knowledge of regulatory frameworks such as NEA and PUB compliance standards.
• Familiarity with ISO50001, GHG Protocol, and other sustainability frameworks will be an advantage.

General Overview

This position is part of the site Mechanical team that provides technical/maintenance support to the Operation and Project teams in LNG Terminal. He/she would be mainly responsible for overseeing the safe and reliable operations and maintenance of the Terminal assets from the Mechanical discipline perspective.

The incumbent is also responsible for establishing, reviewing and overseeing the relevant mechanical design elements of new build equipment / asset enhancement activities and implementation of minor mechanical engineering projects, while ensuring the overall mechanical integrity of the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Provide technical/maintenance support and solutions to the terminal operation Teams including supporting the development of maintenance strategy focusing on equipment reliability, compliance, spares inventory requirement, preventive and predictive maintenance programmes and mechanical maintenance procedures for mechanical equipment.
• Lead the maintenance, troubleshooting, repair, commissioning and replacement of mechanical static equipment and piping systems.
• Manages the in-house contractor and equipment vendor to execute mechanical work/improvements within the terminal to ensure safe work execution and gas supply reliability
• Responsible to ensure compliance to applicable regulations/industry best practices, safe to operate, fit for purpose, maintainable and reliable for the site’s modified or newly build mechanical systems (such as marine loading arm, pumps, pressure vessel, safety device , etc).
• Manage and ensure list of statutory equipment (lifting machine, lifting gears, pressure vessel, safety valves, etc) are timely serviced and inspected in accordance to statutory codes and compliance standards
• Perform root cause analysis on equipment failure and provide recommendations to resolve technical issues which may also arise from vibration, RT, UT, oil and other analysis as part of predictive maintenance programmes
• Manage and maintain historical information on static and rotating equipment such as running hours, data statistical information on all plant shut down and loss of production events caused by mechanical systems, engineering documents and review applicable codes and standards for compliance purpose
• Lead technical discussions, execute and manage project schedules and cost and collaboration with external and internal stakeholders, vendors for end of life and improvement project using SLNG Management of Change (MOC) process for mechanical equipment
• Liaise with external stakeholder including government agencies on approval and risk of shutdown of mechanical system that will affect gas-send out
• Participate in RCA, RBI, HAZID, HAZOP, Model Review studies for mechanical packages, co-ordinates and close out Mechanical related issues
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose

Work Experience

• Minimum of 3-5 years’ experience in maintenance of plant equipment, rotating machinery and static equipment, preferably in oil/petrochemical or related industries
• Good knowledge and experience working on different types of in-service pipeline inspection. Knowledge of the LNG / natural gas or other hydrocarbon industries an advantage
• Relevant technical experience in maintenance of mechanical/ machinery systems i.e compressor, pump, pressure vessel, hydraulic components and piping system.
• Conversant with local codes, regulations and standards, equipment inspection and schedule requirements. Certified in API, vibration and other analysis standards will be well regarded
• The incumbent should possess the following personal attributes:

1. A team player who can work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments
3. Willing to take up new challenges and responsibilities

Education

• Bachelor Degree in Mechanical Engineering or other relevant Engineering/Technical disciplines
• Candidates with professional accreditation or affiliation to professional bodies of engineers will have an advantage

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned

- Fresh Graduates are welcome to apply

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

Job Title: QA/QC Engineer

Salary Range: S$3,400 – S$4800

Report to: QA/QC Manager

Min Qualifications / Experience :

1) Degree in Mechanical Engineering holder with 2-4 relevant experience

Job Skills Required:

1) Knowledge in Microsoft office applications such as Excel, Word, Power Point and

related spreadsheet software.

2) Must be able to work well with others in a team setting.

3) Ability to work independently.

4) Must be able to effectively handle many concurrent projects.

5) AWS, ASME AS, PD5500.

Duties & Responsibilities

a. Assist QA/QC Manager in the managing the QA/QC department.

b. Establish, implement and maintain the QC system for products that need to comply with ASME codes.

c. Prepare, control and maintain the QC Manual in accordance with ASME code.

d. Initiate quality programs and report to QA/QC Manager for the current product quality level.

e. Develop Inspection Test Plan (ITP), inspection and testing procedures.

f. Supervise and guide the team of QC inspectors and administrative assistant.

g. Control the usage of ASME stamps and review ASME’s MDR forms.

h. Maintain and control the welding procedures (WPS) and welder performance qualification records.

i. Any Adhoc assignment given by QA/QC Manager.