Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

• Responsible for detailing and drafting precast concrete components for construction projects to ensure the successful production and installation of precast elements that meet project specifications, structural requirements and quality standards.
• Develop precast layout and fabrication shop drawings of precast elements for submission and production.
• Prepare reinforcement detailing and bar bending schedule.
• Ensure shop drawings are clear, accurate, and in accordance with project requirements, standard and project timelines.
• Incorporate openings, recesses, architectural features, cast in items, lifting system and other relevant information in shop drawings (2D & 3D).
• Raise RFI to finalize precast shop drawings.
• Coordinate with site team concerning on drawing details and technical issues to ease production as well as installation on site.
• Work closely with production and suppliers on the submission/issuance of shop drawings, highlight technical issues and keep them updated of any revisions.
• Attend technical meetings with consultants/clients as and when required.
• Perform any ad-hoc duties assigned.

As a Micron Singapore Construction ELV Engineer, for the design, installation, and commissioning of ELV systems in semiconductor manufacturing facilities. This role involves ensuring that the critical systems for communication, security, and control are properly integrated and functional to meet project requirements.

Extra Low Voltage Systems

Design & Engineering of ELV Systems:
- Design and develop ELV systems such as Life Safety System (LSS), fire alarms, CCTV, access control, public address systems, structured cabling, and building management systems (BMS).
- Perform detailed ELV system layout, cabling schedules, and interface drawings to ensure smooth integration with electrical and mechanical systems.
- Select and specify appropriate ELV components and devices, ensuring they meet project specifications and comply with local and international standards.
- Collaborate with other engineers (electrical, mechanical, etc.) to coordinate ELV designs with other building services.

Project Execution & Installation Oversight:
- Supervise and provide technical support during the installation of ELV systems, ensuring work is performed according to approved designs and specifications.
- Coordinate with contractors and subcontractors for the proper installation of cabling, devices, and control systems.
- Review shop drawings, submittals, and material selections from contractors to ensure compliance with project requirements.
- Conduct regular site inspections to monitor ELV installation progress, identify any issues, and ensure adherence to safety standards.

Testing, Commissioning, & Integration:
- Oversee and conduct system testing and commissioning of all ELV systems to verify they function as per design specifications and operational requirements.
- Ensure seamless integration of ELV systems with other building systems, such as HVAC, lighting controls, and security systems.
- Troubleshoot and resolve any technical issues during the testing and commissioning phases.
- Review as-built documentation, operation manuals, and test reports for handover to the client or facility operations team.

Compliance, Safety, & Continuous Improvement:
- Ensure all ELV installations comply with relevant codes and standards (e.g., NFPA, BICSI, TIA/EIA) and that safety protocols are strictly followed.
- Implement energy-efficient and scalable solutions for ELV systems, considering the evolving needs of semiconductor manufacturing facilities.
- Stay updated on advancements in ELV technologies, recommending system upgrades or improvements where applicable.
- Participate in post-project evaluations to gather lessons learned and apply best practices to future projects.

Qualifications:

Education: Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field.
Experience: Minimum 5 years of experience in ELV systems design and installation, preferably within semiconductor or high-tech construction environments.
Certifications: Profinet certification is required,
Skills: Strong knowledge of ELV systems, proficient in AutoCAD, Revit, or similar design tools; excellent problem-solving and communication skills.

Working Conditions:
This position involves working in both office settings and on active construction sites, with the potential for travel to project locations.

Working Location :

F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Key responsibilities

• Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.
• Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privilegedaccounts and passwords.

Requirements

• 5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.
• Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

Job Description:

• Must be a Diploma/Bachelor's Degree holder.

• Hands-on implementation experience in building full-stack Restful web Applications.

• Experience in the following domain area/Technology/Programming languages

• Communication/Data Protocols: Modbus, OPC UA/AD, IEC 101/104, TCP/IP, SFTP, MQTT, AMQP

• Programming languages: JavaScript, Python, C/C++, SQL

• Experience in Linux, Docker, PostgreSQL, And Firewall management

• Experience in Code Management and Deployment

• Certified in Microsoft Technologies will be an added advantage

• Knowledge in Azure Devops, Azure IOT and Azure sphere will be an added advantage.

Roles and Responsibilities:

• The candidate will be responsible for designing and implementing data acquisition solutions and systems that meet the requirements of our clients.

• The successful candidate will be expected to have strong problem-solving skills and be able to troubleshoot and debug complex issues.

• The candidate will also be responsible for developing and maintaining documentation for solutions, including design specifications and test plans.

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Responsibilities

· Work collaboratively with the applications team to understand and assist with logging and monitoring design.

· Build dashboards for monitoring purpose by identifying and onboarding data sources and gathering requirements.

· Build the automation module which covers for package installation and module for configuration update, registration , chargeback calculation and health monitoring.

· To provide platform support which covers planning and execution of system maintenance, patching, upgrades, change request and troubleshooting; onboarding of new source system to the platform; escalating problems to vendor to achieve

resolution.

· Maintain system performance by performing system monitoring, analysis and tuning; troubleshooting on hardware, software and Operating System issues; designing and running system load/stress test.

· Continuously monitor the source data loading and perform analysis, recommend and carry out finetuning to gain storage cost reduction and system efficiency.

· To perform project management and involve in change management coordination

Requirements

· Knowledge in working with Log management tools, eg. Graylog and/or Elasticsearch-Logstash-Kibana stack, to do logs transformation, filtering, loading, searching and building dashboard.

· Programming experience at the following languages in Unix :- NodeJS, Unix shell script, Perl, Python.

· Experience with System Administration on Linux O/S

· 5+ years experience in building and support application with good technical understanding and management.

· Some experiences in banking systems.

· Dependable, proactive, good in writing and verbal communication, ability to handle pressure and learn on the fly.

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to A-IT Software Services Pte Ltd’s PDPA and e2i PDPA.

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Technical Assistant Engineer to be part of their Engineering Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Technical Assistant Engineer:

• Deliver technical support to customers and contractors, addressing queries and resolving concerns.
• Perform on-site measurements and system evaluations to identify areas for optimization and improvement.
• Take on ad-hoc assignments as needed, demonstrating flexibility and adaptability in various tasks.

Requirements:

• Higher Nitec or Diploma in Engineering Discipline or similar field
• Relevent experience
• Experience with ACMV and Building Management Systems (BMS)
• Possess valid Class 3 Driving License is an added advantage
• Entry level are welcome to apply. Training provided.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Key Responsibilities

The incumbent will

• Provide project management and support to MNC clients for Automation and Digital Transformation projects.
• Perform technical review of vendor documents against user requirement specifications.
• Supervise vendor work onsite to ensure safety & quality compliance.
• Manage project schedule and budgeting
• Manage change controls for assigned projects. Update site documents as necessary.

Requirements

• Diploma/Degree in Engineering, Computing or IT
• 0.5 - 1 Year working experience life science industry
• Good skills in Windows operating system administration, programmable logic controllers, databases and general programming would be added advantage
• Good teamwork and communication skills; ability to interact across functional teams at multiple levels within the organization
• Excellent problem-solving ability and customer-focused

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Industry/ Organization Type: Manufacturing/ Supply Chain
• Position Title: Facility Engineer
• Working Location: Tuas
• Working Hours: 5 days (Monday - Friday, 8 AM - 5 PM)
• Salary Package: Basic Salary + Transport Allowance ($750) + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintenance of building, facilities, and security at all Company’s sites.
• Coordinate and execute, when necessary, inspection, testing, general maintenance, and repair of the critical site systems and equipment.
• Ensure that all equipment and other facilities are working properly.
• Critical systems and equipment include power/ UPS, backup generator, and fuel supply. HVAC (Heating, Ventilation, Air Conditioning), plumbing/ water supply, security doors/ alarms/ cameras, Fire safety systems and equipment.
• Provide situation/ status updates to the Facility Manager on issues which are to be resolved and the critical system or equipment is fully operational.
• Initiate interventions to solve problems in the facilities and develop a system for cleaning, repair and maintenance of facilities.
• Deliver timely and efficient solutions to facility-related requests.
• Liaise with contractors on maintenance/ repair.
• Supervise contractor on-site.
• Review the risk assessment submitted by the contractor prior to the commencement of work.
• Ensure required safety requirements are in place prior to the commencement of work.

APPLY NOW!!!

• Diploma in Engineering or equivalent
• At least 2 years of work experience in Facility Management
• Possess own transport is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #65726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Role & Responsibility:

• Set design requirements based on information from internal teams and user research.
• Identify new product improvement opportunities.
• Analyze how a new product satisfies business needs and user preferences.
• Modify and revise existing designs to meet changing customer preferences.
• Work closely with product engineers to suggest improvements for products and processes.
• Present product design ideas to cross-functional teams
• Help development teams create components by ensuring its built according to design and interaction specifications.
• Maintain the design system, create, and update documentation, and library components.
• Establish design standards and principles accompanying the design system for scalability, efficiency, and consistency.

Skillset Requirements

• Proven experience in all phases of the design process including user research, copywriting, wireframing, prototyping, visual design, interaction design, and usability testing.
• Proficiency and mastery of standard design tools (Figma, Sketch, Adobe CS and XD).
• Demonstrable experience in building design systems, component libraries, and/or UI Kits.
• An intuitive eye for customer needs beyond the obvious.
• Excellent attention to detail.
• Ability to collaborate with cross-functional team members.
• Ability to collect and interpret both qualitative and quantitative feedback.
• A well-rounded portfolio of client work, demonstrating a strong understanding of client objectives.
• Ability to effectively communicate and persuade around design concepts.
• Passion for design, not satisfied with the status quo and always thinking of ways to improve.
• Creative problem-solving skills.
• Dynamic, creative personality, effective at engaging and influencing a variety of audiences.
• Provide assistance to product engineers when needed.
• Recommend new tools and technologies by staying abreast of the latest trends and techniques.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Roles & Responsibilities

• Site & office project management and daily operations including inspections, handover, site measurements, project management.
• Handling technical and engineering issues.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Liaison and meeting with client's representatives, relevant authorities and consultants.
• Site co-ordination, monitoring and report work progress.
• Responsible for timely submission of reports and completion of projects including tender/submission with target dates
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects
• Conduct site check on the repair works in building structures, in accordance with approved methods and procedures proposed by the Qualified Person, specifications and instructions.

Requirement:

• Degree or Diploma in Civil/ Structural Engineering or equivalent
• Incumbent with working experience on Singapore LTA / Rail project preferred
• Possessing 2 years of working experience in the related field will be advantageous.

Salary: up to $2500
Working Days & Hours: Mon-fri office hrs

Location: Boon Lay

Job Description:
Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.

• Perform basic checks, calibration and maintenance of test equipment to ensure that test results are accurate.
• Assist and support in non-conformance and investigations of customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Responsible for data entry, clerical and admin support.
• Maintain housekeeping of QC laboratory to ensure a clean and safe working environment.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements: Min Diploma in Sciences or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Job Description

• Industry/ Organization Type: Manufacturing/ Supply Chain
• Position Title: Facility Engineer
• Working Location: Tuas
• Working Hours: 5 days (Monday - Friday, 8 AM - 5 PM)
• Salary Package: Basic Salary + Transport Allowance ($750) + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintenance of building, facilities, and security at all Company’s sites.
• Coordinate and execute, when necessary, inspection, testing, general maintenance, and repair of the critical site systems and equipment.
• Ensure that all equipment and other facilities are working properly.
• Critical systems and equipment include power/ UPS, backup generator, and fuel supply. HVAC (Heating, Ventilation, Air Conditioning), plumbing/ water supply, security doors/ alarms/ cameras, Fire safety systems and equipment.
• Provide situation/ status updates to the Facility Manager on issues which are to be resolved and the critical system or equipment is fully operational.
• Initiate interventions to solve problems in the facilities and develop a system for cleaning, repair and maintenance of facilities.
• Deliver timely and efficient solutions to facility-related requests.
• Liaise with contractors on maintenance/ repair.
• Supervise contractor on-site.
• Review the risk assessment submitted by the contractor prior to the commencement of work.
• Ensure required safety requirements are in place prior to the commencement of work.

APPLY NOW!!!

• Diploma in Engineering or equivalent
• At least 2 years of work experience in Facility Management
• Possess own transport is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #65726 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Senior Mechanical Engineer requirements:

- The project is a Power Plant at Jurong Island

- Familiar with Singapore's local technical standards, and acceptance process.

- Under the age of 35.

- Speak English

- Good health and strong safety awareness, good at communication

- Obey the Mechanical department management

- Have a qualified and valid skill certificate

- At least 5 years of mechanical work experience in Singapore, preferably as a mechanical engineer at the construction site of a Chinese company.

- Able to read Mechanical Installation drawings and guide site construction work drawings.

- Have a strong sense of responsibility, can take the initiative to work, reasonable planning, comprehensive consideration of work tasks

- Can communicate with owners, subcontractors, and other departments for permits and other works

- Able to start work on short notice will be an advantage

- Mechanical engineer with working experience in gas turbine power plant is preferred

- Adapt to our company's working hours

- Subcontractor management experience is preferred, have subcontractor management ideas

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

Job Description & Requirements

1. Onboard vessel coordination, commissioning, Service, modification and troubleshooting of Cathelco products (MGPS and ICCP systems).

2. Routine Maintenance tasks e.g., On-board Site Surveys, Technical Audits, System Health Checks, Spares Management and Service Report.

3. Ensure service / commissioning work is always completed safely and efficiently.

4. Ensure service / commissioning reports are completed fully and to a good standard on completion of each order and get signed from owner / yard.

5. Discuss and recommend technical solutions with Customer and Project Manager.

6. Commissioning vessels at Singapore / Overseas Major Shipyard.

7. Responding to Technical queries from Shipyard and customers within a given timeline.

8. Ensure that the product support related to areas of the complaints and the warranty system is properly managed with records maintained.

9. Oversee the installation of the systems or equipment.

10. Maintain close working relationship with our key customers to ensure the follow through until the issue is resolved.

11. Investigates root causes of failures and recommend solutions.

12. To deal with customer on the warranty issues from technical aspect.

13. Performs any other service and training duties as and when assigned.

Qualification/ Requirement:

1. Diploma in Engineering (Marine/ Mechanical / Electrical)

2. At least 3 years of working experience in marine related

3. Independent with team-oriented spirit

4. Ability to read mechanical / electrical system drawing.

5. Good communication and analytical skills.

6. Good report writing skills.

7. Prepare to travel overseas for commissioning / service works.

8. Understanding and ability to use Microsoft office, specifically MS word and excel.