About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

5 days office hour

Work location: Tuas ( pick up Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun)

Job Description

• Conduct analytical testing
• Conduct equipment training
• Troubleshoot and rectify technical issues pertaining to equipment and tests
• Calibrate/maintain equipment assigned
• Maintain good house-keeping and safe working enviroment
• Maintain/manage general lab inventory (e.g. Reference Standard, Chemical or Consumable Inventory)
• Detect and report deviation, questionable/out of specification, safety concern
• Participate in laboratory/safety investigations
• Participate/lead in equipment qualification
• Write/revise procedures, user guide
• Guide junior analyst
• Participate in assigned committees (e.g. Safety committee, License holder, etc)
• Participate/lead in projects
• Participate in internal/external audits
• Perform peer review for solutions prepared in the laboratory

Requirement

• Min Degree in Chemisty/ Pharmaceutical / Chemical Engineering
• Min 6mnths experience in QC lab.
• Knowledge in operating HPLC and Empower software added advantage.

Please email your resume at [email protected] or telegram me at @alexgohhl

Alex Goh Hock Leong (Alvin)
Recruit Express Pte Ltd (Healthcare & Lifescience)
Company EA Licence number : 99C4599
Personnel EA License: R1763413

• MNC Company
• Basic $4000 - $5500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Working Location: Jurong Island (Transport Provided)

Job Responsibilities:

• Responsible for setup of QC Laboratory at new site, including management and training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant
• Interpret laboratory results that are outside of the technical ability of the Lab Analysts
• Review all process and final product test results to check for validity and possible quality-related issues
• Assist quality lab manager in classification for final product and compounding lots
• Assist quality lab manager to develop and implement QC specifications and standards
• Assist quality lab manager to establish lab system according to HSEQ requirements
• Conduct method development and validation, review and upkeep SOP of test procedures, calibration procedures and analytical instruments
• Analyse, review and troubleshoot reliability issues of laboratory equipment and analysis problem and develop practical solutions
• Liaise with vendors to troubleshoot and maintain laboratory equipment
• Develop, implement, and follow calibration plan for equipment to ensure lab data is always accurate, consistent, and repeatable
• Manage lab external agency audits and management systems certification compliance
• Support Manufacturing, Quality, Sales, and Product Management functions
• Assist lab manager, production, or other departments with special projects, as needed
• Lead Special lab Projects and new grade trials
• Implement and participate in safety and quality improvement activities
• Evaluates reported results for consistency with plant process conditions
• Trains laboratory personnel on new instruments and procedures as needed
• Conduct internal audits on the proper execution of test methods
• Liaise with Supplier, execute procurement process and receipt
• Monitor and follow up on daily lab analysis result for accuracy and troubleshooting
• Task as assigned by QC Manager

Requirements:

• A bachelor's degree in chemistry or related field
• Min 5 years’ experience in analytical lab with manufacturing facility
• Experience required in new Laboratory set up, system establishment.
• Experience required with GC, ICP, GC-MS, Antek, KF, IR, UV, Extruder, DSC etc

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

Description:

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Requirements:

• Min. Diploma in Applied Chemistry / Perfumery and Cosmetic Sciences / Chemical Engineering
• Min 2 to 3 years exp in similar setting

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Job Title: QC Inspector (ID8242)
Location: Ang Mo Kio, Singapore
Working Hours: Mon-Fri: 9AM-6PM
Salary: $2000 - $2800

Job Description:
Microbiology test including environmental control, raw material and finished product test
Responsible from the incoming raw material, packaging material, pre-weight raw material, in-process product control till final product control
Lab, retention room and pre-weight room maintenance of inventory, equipment, items and cleanliness
Maintain and operate DI water system
Pre-weight process monitoring and checking
Responsible for in charge of retention sample, SDS and COA creation and modification
If receive any customer complain regarding the product, QC will need to assist on trouble shooting or testing for product improvement
Support internal audit and external audit for GMP, ISO14001, ISO9001 and ISO45001
GMP and ISO documentation update, recording and maintenance
Create, update and maintain SAP system
Update and maintain Health Sciences Authority Good Manufacturing Practice guidelines, environmental practice guidelines, quality manual, health and safety policy
Follow up and manage new records of products permits and licenses thru HSA
Highlight, feedback, suggest during and/or after monthly staff meeting
Monitor and manage pest control contract and location of baits, ensure monthly inspections are done
Other projects and assignments instructed or delegated by management and director

Requirement:
· Minimum Diploma certificate with Chemistry background will be advantage
· At least 2-3 years’ experience in QC required
· Preferably with knowledge on GMP, ISO9001, ISO14001 and ISO45001
· Independent thinker who acts and decides objectively and with integrity
· Willing to learn new things and hands on
· Computer literate
· External and internal training will be provided

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

• Supports team task to enable adequate resources to support laboratory infrastructure (E.g.: Equipment, Method, System) needs
• Participates in the management of laboratory equipment and IT systems in QC laboratory to ensure business continuity and system data maintenance, equipment maintenance/calibration is in a state of compliance
• Participates in method technology transfer and laboratory equipment technological refresh/introduction activities into QC Laboratory within project timeline
• Participates in QC laboratory long range planning to ensure laboratory infrastructure needs is secured and Data integrity plan is in place to support business and laboratory compliance
• Author method transfer/qualification and equipment qualification documentation (E.g.: Reports, Protocol, change control, related quality documents or procedures) are in cGMP compliance to corporate/site or regulatory requirements
• Supports and ensure timely escalation/handling of lab events or related quality actions. (E.g.: NCR, Lab Investigation, CAPA)

Qualification

• Min Diploma / Degree in science courses
• Minimum 1 - 3 years of pharmaceutical experience in a Quality role
• internship experience in pharmaceutical industry will be an advantage
• Able to start work immediately

Salary range: Up to $4K + $500 transport allowance

Office hours, Mon to Fri

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Recruiter Ref code: #HKH

Description:

• Responsible for the timely completion and data vertification of all testing of raw material, intermediates, in process control samples and final product
• Maintain up to date, complete and precise records of all tests performed
• Ensure that all test equipment is used and maintained properly in GMP environment
• Act as an SME for simple to complex instruments and techniques where needed
• Understands, implements and maintains cGMP and 6S concept
• Effectively perform a multitude of Laboratory techniques
• Trains new analysts
• Responsible for ownership of Lab investigations

Requirements:

• Min Degree in chemistry / chemical engineering /science discipline
• Min 2-3 years of HPLC / GC experience
• Able to commit 12 hours rotating shift (Day and Night shift)

Salary range: Up to $4K

Fixed allowance: Up to $850

+ Variable shift allowance

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Summary Benefit:

• Salary range: $2000-$2500 + OT
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Description:

• Testing of raw material, in-process control samples and final product
• Implement and maintain cGMP
• Effectively perform various laboratory techniques
• Ensure all equipment is used and maintained in GMP environment

Requirements:

• Min Diploma in any science related courses or above
• Experience in HPLC / GC etc
• Familiar with GMP / GLP environment
• Able to start immediate or within short notice period

If you meet the requirements of this role, please email a detailed resume in Word document to Cindy Wong

CEI Registration No.: R2095121

Email: [email protected]

Whatsapp: 9666 7710

*All information will be treated with strictest confidence. We regret that only short-listed applicants will be notified.

EA License No: 99C4599

EA Personnel No: R2095121

EA Personnel Name: Cindy Wong Xin Yi

Position title: QC Inspector

Salary: $2000 - $2800

Location: Ang Mo Kio (3 bus stops from Yio Chu Kang Interchange)

Working Days: 5 Days Work Week

Working Hours: Monday to Friday 9am to 6pm

Job Description:

•Microbiology test including environmental control, raw material and finished product test.

•Responsible from the incoming raw material, packaging material, pre-weight raw material, in-process product control till final product control

•Lab, retention room and pre-weight room maintenance of inventory, equipment, items and cleanliness

•Maintain and operate DI water system

•Pre-weight process monitoring and checking

•Responsible for in charge of retention sample, SDS and COA creation and modification

•If receive any customer complain regarding the product, QC will need to assist on trouble shooting or testing for product improvement

•Support internal audit and external audit for GMP, ISO14001, ISO9001 and ISO45001

•GMP and ISO documentation update, recording and maintenance

•Create, update and maintain SAP system

•Update and maintain Health Sciences Authority Good Manufacturing Practice guidelines, environmental practice guidelines, quality manual, health and safety policy

•Follow up and manage new records of products permits and licenses thru HSA

•Highlight, feedback, suggest during and/or after monthly staff meeting

•Monitor and manage pest control contract and location of baits, ensure monthly inspections are done

•Other projects and assignments instructed or delegated by management and director

Job Requirements:

•Minimum Diploma certificate with Chemistry background will be advantage

•At least 2-3 years’ experience in QC required

•Preferably with knowledge on GMP, ISO9001, ISO14001 and ISO45001

•External and internal training will be provided

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

• Monitor Product Quality Compliance
• Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc
• Identify OOS, deviations and quality problems
• Report testing activities and results
• Comply with Quality and HSE procedures when carrying out sampling and QC tests
• Manage Laboratory Operations
• Follow the organization’s operational excellence model for laboratory work
• Perform routine calibration and maintenance of laboratory equipment
• Report equipment OOS issues and equipment purchase requests
• Maintain integrity, accuracy and completeness of QC data and records
• Optimise quality and efficiency of department workflows and activities
• Assist in preparing and participate for laboratory inspections and audits
• Compile data to support business and performance metrics reporting
• Propose solutions to improve QC procedures, activities and workflows

Requirements

• Min NITEC / Diploma in chemistry / chemical engineering / Chemical process Tech
• Min 1 year of HPLC lab working experience

Mon to Sun - Any 5 days. 2 rotating shifts

Based at Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Description:

• Responsible for the timely completion and data vertification of all testing of raw material, intermediates, in process control samples and final product
• Maintain up to date, complete and precise records of all tests performed
• Ensure that all test equipment is used and maintained properly in GMP environment
• Act as an SME for simple to complex instruments and techniques where needed
• Understands, implements and maintains cGMP and 6S concept
• Effectively perform a multitude of Laboratory techniques
• Trains new analysts
• Responsible for ownership of Lab investigations

Requirements:

• Min Degree in chemistry / chemical engineering /science discipline
• Min 2-3 years of chemical experience
• Exp in pharma industry will be an advantage
• Able to commit 12 hours rotating shift (Day and Night shift)

Salary range: Up to $4K

Fixed allowance: Up to $850

+ Variable shift allowance

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Brief Summary:

• Basic $2000 - $2600 (Depends on experience)
• Mon - Fri (9.00am – 6.00pm)
• Products: consumable healthcare, skincare, household cleaning solutions
• Location: 2 Ang Mo Kio Street 65, Singapore 569058 (3 bus stops from Yio Chu Kang Interchange)
• On Job Training will be provided.
• Permanent role + AWS + Bonus

Job Responsibilities:

• Lab microbiology testing.
• Support in ISO documentation (9001 & 14001).
• Assist on troubleshooting or testing for product improvement.

Job Requirements:

• Min. Diploma in Chemistry/ Biotechnology or related field
• With or without relevant working experience are welcome.

For consideration, kindly submit your CV by clicking “APPLY NOW” or TEXT +65 9422 1220 for confidential discussion.

*Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22111807 | Yap Teng Hui

Description:

• Responsible for the timely completion and data vertification of all testing of raw material, intermediates, in process control samples and final product
• Maintain up to date, complete and precise records of all tests performed
• Ensure that all test equipment is used and maintained properly in GMP environment
• Act as an SME for simple to complex instruments and techniques where needed
• Understands, implements and maintains cGMP and 6S concept
• Effectively perform a multitude of Laboratory techniques
• Trains new analysts
• Responsible for ownership of Lab investigations

Requirements:

• Min Diploma in chemistry / chemical engineering /science discipline
• Min 2-3 years of HPLC / GC experience
• Able to commit 12 hours rotating shift (Day and Night shift)

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Description:-

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical or Mechatronics Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites and project management.
• Responsible team player with the ability to work independently in challenging projects and timelines.

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawing.
• Work with purchaser to source & make orders for all materials required and purchase the required materials according to project timeline.
• Supervise and monitor workers / welders on site for installation or maintenance.
• Attend site meetings with clients / architects and authorities on project technical matter.

Requirement:-

• Minimum Dipoma and Degree in Mechanical Engineering.
• Required skill(s) MS Office, MS project, Autocad.
• Has work experience in consruction sites and project management.
• Responsible, detail-oriented and able to multi task.
• proactive team player with the ability to work independently in challenging projects and timelines.
• Possess Class 3 driving license will be an advantage.

Responsibility

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D