An exciting opportunity as an Electrical, Instrument & Telecom/ QC Inspector awaits the successful candidate.

Responsibilities:

· Carry out inspection as per daily inspections requests/job assigned by QA Trainee Technicians/Technicians.

· Co-ordinate with production QC on inspection and quality-controlled activities.

· Report to QA Engineers/QA Technicians with regards to any non-compliance or discrepancies found during inspections.

· Be familiar with loop test, Hi pot test, Mechanical completion check ITR.

· Perform E&I related Equipment and material inspection during receiving meet the purchase specifications.

· Check for protection and preservation of Electrical & Instrument system.

· Assign the systems to be tested to the various supervisors and technicians involved in the operation.

· Ensure the Quality work processes to enhance efficiency and productivity.

· Coordinate with all sections for Inspection & testing requirements.

· Liaise with owners, class surveyors and government bodies pertaining to project requirements.

· Coordinate the testing/ commissioning requirements with Engineering, Project Manager, QA Department, and vendors.

· Report and non-conformance and issue Improvement note, where necessary.

· Ensure timely completion of project.

· Ensure all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements.

· Any other assigned duties and responsibilities.

Requirements

· Diploma/Bachelor’s degree in Electrical Engineering

· Minimum 5-10 years of experience, 3 years in marine construction and installations

· Familiar with word/Excel/quality software

· ISA CCST Level II / Level III

· NCCER

ROLE RESPONSIBILITIES

• The reviewing of site purchase orders to ensure that the applicable requirements are met
• The control of on-site and off-site vendor inspectors
• The compliance on of vendor inspection assignments packages
• The coordination and resolution of any nonconforming product Reviewing vendors' QA/QC systems per contractual requirements
• Attendance at the site and inspection procurement meetings
• Coordination of vendor quality approvals when required
• Ensure the verification of documentation and certificates for materials purchased by vendors
• Review of supplier quality plans against contract requirements
• Review procurement documents to ensure that quality requirements have been correctly translated into purchase requisitions and design documents
• Review supplier inspection procedures and personnel qualifications
• Review supplier material certificates
• Take part in supplier audits and surveillance
• Coordinate with the company discipline engineers for the resolution of technical discrepancies
• Coordinate with management for quality improvements Issue nonconformance reports
• Track all nonconformance reports
• Please coordinate with the owner representative on all procurement issues Monitor
• progress of all purchase requisitions

Working Hours: Monday to Saturday, 9 am to 6 pm.

May need to work on Sundays if required.

Information:

• Salary: $2400 - $2800 Basic
• Attendance: $40
• Normal working hours: Mon-Fri, 8am-5pm / or Weekly Shift Rotation
• Company transport at various location in the west

Responsibilities:

• Perform sampling incoming quality inspection
• Perform using equipment such as Vernier Caliper, Micrometer, Guages, Profile Projector and Smart Scope

Requirements:

• ITE/Diploma in Engineering
• Entry level

Interested applicants, send in your updated resume by clicking “Apply Now”.

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

• Reports to Construction Manager
• Ensure the quality of all construction work performed on site are in accordance with the company's QA/QC requirement
• Visit project sites, arrange and conduct QA/QC inspections
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice
• Ensure that all project quality records and quality audit plans are maintained.
• Prepare inspection & test plans/check list for site activities Review inspection and testing reports
• Propose corrective action and ensure and timely and effectively carried out to rectify
• Oversee delivery inspection of project materials
• Review, approve and maintain QA/QC related documentation and carry out other duties as assigned

Job Requirements:

• Diploma/Degree in Architectural or Civil / Structural Engineering
• At least 6 years of relevant site project experience in QA/QC roles for construction projects
• Familiar with Singapore Codes and Practices
• Experience with CONQUAS
• Experience with Constructability Score
• Experience with Green Mark Certification
• Able to liaise with workers/Clients, Consultant, Main Con colleagues, subcon and suppliers on QA/QC works and protocols at site
• Location : Punggol (Near MRT)
• Project : Sports Centre

Career Highlights:

• Good career advancement opportunity.
• Competitive compensation benefits.
• Company’s transport available.

Job Description:

• Perform Surveillance Inspection to ensure that the construction work is performed and duly meeting the project specific Quality Requirements.
• Verify in process inspection, final inspection and welding.
• Carry out Welding control and inspection.
• Prepare and maintain Welding Audit Report during construction.
• Record result of inspections and maintain records of specific items as per contract/specifications.
• Administer AFI request to Client and 3rd party and coordinate for inspection as identified in the respective discipline ITP.
• Raise Non-conformance reports as seen during inspection and follow-up on status of rework and close-out.
• Arrange for proper NDT requirements as per specifications.
• Interpret RT films pertaining to welding joints.
• Review all NDT reports and approval.
• Establish and maintain inspection and NDT progress status on weekly basis.
• Generate weekly weld rejection rate summary and weekly welder performance.
• Witness all testing activities as required by approved Inspection and Test plan.
• Monitor PWHT activities carried out as per approved procedure.
• Attend to all potential quality issue to prevent occurrence of defects.
• Prepare Test Packs for Piping Hydro static testing.
• Prepare/compile final punch list prior to delivery of the fabricated and assembled components.
• Follow-up other discipline HOD’s to get relevant documents as per MDR Index for compiling.
• Progressive compilation of records for MDR (Final Dossiers).
• Coordinate with client for review and approval of the MDR.
• Carryout surveillance activities during project execution.

Job Requirements

• Diploma/Degree in Mechanical Engineering
• Possess of valid Welding Inspectors certifications (AWS or CSWIP)
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.
• Experience in structural and piping materials.
• Welcome Fresh Graduate to apply.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Position: Quality Assurance QA/QC Engineer (MUST BE from Marine Engineering)
• Location: North Bridge Road (Walking distance from Fort Canning MRT Station)
• Working hours : 5 days / Monday - Friday - 9.30am -5.30pm
• Salary (Commensurate with experience): Basic up to $ 7000 + AWS + 14 days Annual Leave
• Duration : Permanent
• Industry : Global leader in Marine Lifting Equipment

Main Responsibilities:

• Perform inspection of incoming products, materials or customer items according to job project requirement
• Perform initial inspection and raise report
• Perform in-process inspection according to procedures and customer’s specifications. Raise report whenever necessary. Measure and record the dimension of components/parts using measuring instruments and analyse the findings for discrepancy
• Perform final inspection of items including dimensional and NDT to ensure that all quality requirements has been achieved. Analyse result and decide the acceptance level of the final product
• Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of Inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.

Requirements:

• Degree in Engineering or Diploma in Mechanical/ Marine Engineering or equivalent
• Experience in handling project Audit and liaise with internal & external auditor
• Knowledge in structural fabrication, piping isometric drawing and materials
• Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on LinkedIn: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Quality Inspector (Jurong East)

working hours: 5 days - 8am - 5.30pm + evening/ weekend OT

base salary + OT pay + 1 month AWS + company shuttle bus (no VB)

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

• 5 days work week
• Location: Tuas
• Overtime pay: 1.5 times and 2 times
• Gross salary can up to $3500
• Benefits: Paid Annual Leave, Performance Bonus, Medical Insurance, Transport Allowance

Job Scopes:

• Follow appropriate Work Instructions (WI).
• Ensure material/component traceability (router sheet).
• Use only calibrated and validated equipment/measuring devices.
• Perform inspections as per Quality Procedure (QP) and WI.
• Maintain material/component traceability.
• Clock in/out (VM) and update router sheet.
• Report non-conformance(s) to Supervisor/Lead.
• Re-inspect repaired/reworked items before further processing/delivery.
• Prepare and complete inspection records before shipment.
• Perform ad-hoc duties assigned by superior.

Requirements:

• At least 1-2 years of QC working experience in a Manufacturing environment (preferably Oil and Gas/ Precision Engineering)
• Desirable to have expertise in LDP (Liquid Dye Penetrant) or NDT (Non-Destructive Testing).
• Able to work rotating shifts and overtime on weekdays, weekends, and sometimes public holidays.

Aurora Asia Pacific (21C0671)| Ying Kee (R21103783)

Job Description

• Industry/ Organization Type: Food Manufacturing/ Production
• Position Title: QC Lab Assistant/ QC Lab Technician
• Working Location: Tuas (Transport provided)
• Working Hours: Monday to Friday, 8 am – 5 pm
• Salary Package: Up to $2,500 + Allowances + Bonus
• Duration: Permanent

Key Responsibilities

• Conduct sensory evaluations, along with chemical and microbiological tests, on both products and raw materials.
• Understand and implement sampling plans, conducting sampling of raw materials and products as required.
• Prepare laboratory culture media and reagents as needed.
• Prepare product samples upon customer request or for internal/external laboratory testing.
• Accurately document all necessary information on the provided inspection forms and master list.
• Maintain cleanliness and organization of the laboratory and its equipment.
• Notify the QC Head of Department (HOD) about lab inventory levels to ensure timely procurement of necessary items and equipment for analysis.
• Report any non-conformities in raw materials and products to the HOD.
• Store retained raw material samples according to production dates for future reference in case of customer quality disputes.
• Participate in company-wide activities and tasks as required.

APPLY NOW!!!

• Minimum GCE "O" Level with passes in Chemistry and Biology
• At least 1 year of related working experience in laboratory work is preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68915 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Exciting Career Opportunities: Operator & Quality Control (QC) Roles – Join Our Thriving Team!

If you’re looking for a role where you can contribute hands-on and grow within a dynamic environment, look no further. We have positions available for Operator and Quality Control (QC) professionals who are ready to thrive in a fast-paced production setting.

Position 1: Operator

Quality Control

• Product Inspections: Conduct and oversee routine inspections and sampling of raw materials, in-process products, and finished goods to ensure they meet the company's and customer-agreed quality specifications. Address deviations or non-conformities, report findings and recommend corrective action plan.
• Testing and Monitoring: Coordinate and monitor chemical, microbiological, and physical testing of products and materials. Ensure all test results comply with product specifications.
• Production Monitoring: Collaborate closely with the production team to monitor quality control at various stages of production. Implement corrective and preventive measures to address process deviations or defects.
• Customer Complaints: Investigate customer complaints related to product quality or safety. Conduct root cause analysis and recommend corrective actions to prevent reoccurrence.

Quality Assurance

• Policy and Procedure Implementation: Enforce QA policies, Standard Operating Procedures (SOPs), and quality control measures to ensure compliance with standards.
• Regulatory Compliance: Ensure the company complies with all relevant food safety regulations and certifications.
• Documentation and Record-Keeping: Maintain accurate records of all quality-related activities, internal audits, external inspections, test results, and corrective actions. Ensure proper document control for QA/QC records.
• Training: Conduct and facilitate training sessions on food safety, good manufacturing practices (GMP), HACCP, and other quality-related topics for production, QA, and QC staff.

Process Improvement

• Process Improvement: Identify areas for improvement within the QA/QC processes. Lead continuous improvement initiatives to enhance product quality and safety, reduce waste, and increase efficiency.
• Data Analysis and Reporting: Analyze quality data and trends to identify patterns of defects or issues. Generate reports on key quality performance indicators (KPIs) through Statistical Process Control.

Cross-Functional Collaboration

• Team Leadership: Supervise and mentor the QA/QC team, ensuring alignment with organizational goals and fostering a quality-focused culture.
• Collaboration with Other Departments: Work closely with production, R&D, procurement, and logistics to ensure a cohesive approach to product quality and safety. Provide input into new product development and specification setting.

Job Description

• Industry/ Organization Type: Manufacturing of High Precision Tooling Components
• Position Title: QC Inspector (Precision Machining)
• Working Location: Commonwealth
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $3,500 + OT + Up to 2 months of Variable Bonus
• Duration: Permanent

Key Responsibilities

• Read and interpret blueprints and specifications to ensure production operations meet required standards.
• Recommend any necessary adjustments and modifications to production processes to ensure product quality.
• Inspect and test materials and equipment produced by the company to verify compliance with specifications.
• Use precision measuring tools such as micrometers, calipers, and gauges to assess products for accuracy.
• Identify and remove products that do not meet production standards and raise Non-Conformance Reports (NCR) for review and resolution.
• Accept or reject finished products and communicate inspection results with the production team for necessary improvements.
• Perform random in-process inspections to monitor product quality at various stages of the production cycle.
• Execute other related duties as assigned.

APPLY NOW!!!

• At least 1 year of experience working as a QC Inspector in the Precision Machining industry.
• Familiarity with production processes in the Precision Machining field is essential.
• Technical skills to understand and interpret blueprints, documents, and technical manuals.
• Basic proficiency in mathematics and computer skills for documentation and quality reporting.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70254 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

This role is responsible for conducting test and scheduling/coordinating of testing with other departments to ensure timely delivery of results. This role is also required to perform peer review of laboratory data, support OOS and Deviation investigation.

Responsibilities

• Analysis of final product, in-process, raw material or environmental samples according to Standard Operating Procedures and Test Methods.
• Documentation and review of results in accordance with current Good Manufacturing Practices (cGMP).
• Problem solving of analytical methods as well as troubleshooting of equipment.
• Involvement in method transfers and validation.
• Involved in equipment qualification and technical selection of QC equipment and/or standards and reagents.
• Assay trend analysis, document revision and update.
• General lab support includes housekeeping, equipment maintenance, inventory of supplies, lab supplies ordering, management of glass wares, autoclaving etc.
• Assay trend analysis, document version and update.
• Independently lead and conduct OOS, deviation investigations. Draft investigations reports.
• Support in team leadership and driving results to meet department KPIs.
• SME in 1 or more areas as aligned with the training plan.
• Able to make decisions independently on the area of expertise.
• Coach and train junior team members.
• Practice and support audit activities
• Any other duties as assigned by your Supervisor/Manager

Experience

• Degree/Diploma in a relevant Science field or Equivalent.
• Understanding and execution of spectroscopy and other assigned methods which may include chromatography methods (HPLC), ELISA, PCR, CE, SDS-PAGE, IEF, icIEF, TOC , Protein Concentration (A280 or SoloVPE), osmolality, potency methods, appearance and other physiochemical methods.
• Work experience preferably Lab experience in a biotech or medically related field
• Relevant experience and accomplishment to dictate final position for which the candidate may qualify
• Good problem solving and analytical skills

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Responsibilities:

• Implementation of medium to large scale Biometric (.NET Framework) projects in the business domain of Public Security with emphasis on IT Security & Biometric Control;
• Conduct formal release tests and/or regression tests;
• Prepare test plans/cases, scripts and project related test deliverables;
• Generate test data to test each software or hardware component according to the quality criteria and business requirement;
• Design and develop automated testing procedures or scripts and keep them up-to-date;
• Ensure quality and accuracy is maintained throughout the software test life cycle;
• Enable timely delivery of the software or hardware release according to project schedule;
• Provide timely progress status update for Internal SIT and UAT, and onsite UAT;
• Ability to understand and adapt to relevant technologies and products; and
• Ability to work with team members to troubleshoot any problems with systems in production.

Requirements:

• Diploma/Bachelor Degree in Computer Engineering/Science or IT related course.
• Minimum 2-3 years functional, scenario and performance testing experience.
• Experience in Oracle and Microsoft SQL Server Databases.
• Experience in Katalon and knowledge in SeleniumHQ andHP Load Runner will be advantageous.
• Singaporean or Singapore PR preferred.

Job Description

• Industry/Organization Type: Manufacturing/Production
• Position Title: QC Engineer
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8.30 am – 6 pm
• Salary Package: Up to $4,500 + VB
• Duration: Permanent

Key Responsibilities

• Collaborate with the Process Engineer and Engineering team to define and implement quality control requirements.
• Document inspection criteria and develop comprehensive quality plans.
• Work closely with the QA, Process, and Product teams to devise and implement corrective actions for quality issues.
• Engage with the Process team to conduct in-process and final quality control (FQC) audits.

APPLY NOW!!!

• Minimum of a Diploma in Manufacturing or Quality Engineering.
• At least 1 year of relevant experience in an electronics product manufacturing environment.
• Proficient in managing Supplier Quality Assurance (SQA).
• Comprehensive knowledge of quality control for incoming, in-process, and outgoing products.
• Familiarity with ISO 9001, 14001, 13485, and 45001 standards, as well as FDA requirements.
• Understanding of IPC requirements in PCB Assembly, and quality requirements for plastic molding, die casting, extrusion, metal stamping, and machining parts.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69906 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

QA & QC Assistant/Executive

Roles & Responsibilities

• Responsible for day-to-day inspection of in-process and finished products
• Conduct daily hygiene inspection of process workers, process rooms and related areas to ensure it meets required standards
• Responsible for reporting any non-conformance of products/process/ hygiene violation in timely manner
• Assist in guiding production leaders/operators in implementing corrective actions and continuous improvement in production area
• Ensure proper records of product and hygiene inspections
• Assist in product development
• Assist QA Executive in implementation/ maintenance of SFA, Halal, ISO22000 & HACCP certifications
• To liaise with authorities (eg. SFA) on related Food Safety / License issues when required.
• In charge of health certificate application and laboratory reports arrangement and maintenance of such records.

Requirements

• Minimum Diploma in Food Science/microbiology
• Min 1 year experience as QA/QC in Food Manufacturing industry
• Understanding of FSSC/ISO 22000/HACCP/GMP/ Halal requirements is advantageous
• Meticulous, positive working attitude, able to cooperate/ communicate with all level of employees
• Teamwork
• Training provided

Good Company Welfare & Benefits

• Yearly Bonus & Increment based on individual performance
• Medical $800
• Dental $200
• Annual Leave

Interested Candidates may send CV [email protected]

Stephanie Ang | R133070 | 24C2426

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Responsible for QC inspection of electronic parts, PCB, PCBA, cable, assembly, mechanical parts and finished goods.
• Prepare inspection reports for accepted parts and produce discrepancy reports for rejected parts.
• Ensure that the product meets specifications in terms of its appearance and its functions.
• Use various inspection techniques and methods such as visual inspections, measurements and functional testing to determine product quality standards.

Requirements:

• GCE N level or equivalent
• At least 2 years of QC experience
• Good knowledge in mechanical parts, PCB, PCBA, cable assemblies and electronics components.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Supports team task to support laboratory operation and infrastructure in the areas of examples: Equipment, Data Systems, Method) needs
• Participates in the management of laboratory equipment and computerized systems in QC laboratory to ensure business continuity and system data maintenance e.g., Empower, LIMS, SAP and equipment maintenance/calibration is in a state of compliance
• Participates in method technology transfer and laboratory equipment technological refresh/introduction activities into QC Laboratory within project timeline
• Participates in QC laboratory long range planning to ensure laboratory infrastructure needs is secured and Data integrity plan is in place to support business and laboratory compliance
• Author and execute qualification and equipment qualification documentation / method transfer (E.g.: Reports, Protocol, change control, related quality documents or procedures) are in cGMP compliance to corporate/site or regulatory requirements
• Supports and ensure timely escalation/handling of lab events or related quality actions. (E.g.: NCR, Lab Investigation, CAPA)
• Supports preparation and participate in internal/external audit, audit responses, to enable a successful audit outcome
• Participate in EHS, Business Compliance, cGMP and all other compliance-related matters, where applicable. Lead/supports CI initiatives to enable laboratory performance metrics
• Carry out any other task as assigned by Line manager

About You:

• University Degree in Science related discipline (E.g.: Chemistry, biology, pharmaceutical sciences, or equivalent experiences)
• Minimum 1 - 3 years of pharmaceutical experience in a Quality Control Function
• Experienced in Regulatory/ Pharmaceutical requirements
• Analytical thinking with basic problem solving and writing skills
• Motivated and independent
• Basic GMP knowledge/Experience on QC Lab Equipment and Method transfer
• Good communication skills and Strong ability to work cross functional teams
• Ability to work towards timeline
• Based in Tuas

Job Type: Contract

Contract length: 12 months. Option to extend/convert subject to performance review.