• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assist to ensure all M&E construction activities meets the performance and procedures and making recommendations for improvements and correction actions.
• Manage contractors with a focus on quality, compliance with engineering drawings, applicable code and standards and project schedule and cost.
• Work closely with draftsmen and all sub-contractors to carry out design, supervision and installation of the entire mechanical installation, including testing and commissioning of all systems.
• Provide supervision and input to site projects with regards to site logistics, installation, safety, sub-contractors, quality, cost control and on-time reporting.
• Assist the Project Manager in developing and implementing corporate construction policies.
• Oversee the effective management of project activities to ensure timely delivery and low wastage.
• Liaise with internal department, government/Statutory Authorities, consultants, clients, suppliers to ensure smooth operation of projects.
• Assist in timely project progress reporting to Management and attending to all site meetings.
• Ensure business objective is obtained and complies with all relevant regulation and laws.
• Attending to all site meetings with owner, consultants and main contractors on all matters.
• Monitor the project progress and deliver project to the expected safety and quality objectives and ISO standards
• Manpower allocation to maximise productivity.

Requirements

• At least a Diploma in Engineering majoring in MEP or related field.
• Minimum 4 years of working experience. those with more years of experience will be considerred a senior position
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

Benefits:

• Basic: Up to $3500
• Transport allowance: $800
• Mobile allowance
• OT Pay

Responsibilities:

• Provide technical support and assistance to clients and internal teams in the security solutions industry.
• Install, maintain, and troubleshoot security systems such as CCTV, access control, and alarm systems.
• Conduct site surveys and assessments to determine optimal security system solutions.
• Collaborate with clients to understand their security requirements and provide customized solutions.
• Ensure compliance with industry standards and regulations in the implementation of security systems.
• Provide training and guidance to clients and internal teams on the operation and maintenance of security systems.
• Monitor and evaluate the performance of security systems and recommend improvements or upgrades.

Requirements:

• Min Nitec Electrical or Electronic Engineering or related field.
• Min 2 years of experience in the security solutions industry.
• Strong knowledge and hands-on experience in CCTV, access control, and alarm systems.
• Excellent problem-solving and troubleshooting skills.
• Good communication and interpersonal skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No.: 13C6305

Registration No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

A leading Enterprise Software MNC with more than 40 years of operations is growing rapidly and they are looking for Senior Sales Engineer to join the team here in Singapore.

*Business Mandarin is a must due to the need to engage with stakeholders from such markets*

What You Will Be Doing

• Collaborate with sales teams to understand customer needs and provide technical solutions
• Deliver product demos, presentations, and proof-of-concepts to customers
• Develop and maintain deep technical knowledge of our products and services
• Provide technical support and guidance to customers and sales teams
• Identify and pursue new sales opportunities, including upselling and cross-selling
• Work closely with cross-functional teams, including product development and customer success
• Develop and maintain sales engineering materials, including datasheets and case studies
• Stay up-to-date with industry trends, competitor activity, and market changes

What we are looking for:

• Bachelor's degree in Computer Science, Engineering, or related field
• Minimum 10 years of experience in a pre-sales capacity, with a focus on enterprise software
• Strong understanding of software solutions
• Understanding in VBA, Java, J2EE, XML, IIS, .NET, OCR, ICR, Web Services
• Excellent communication, presentation, and interpersonal skills
• Able to travel regionally
• Understanding of delivering solutions on Cloud
• Business Mandarin is a must due to the need to engage with stakeholders from such markets

Apply now or reach out to me at [email protected] for a confidential discussion.

Unfortunately, only shortlisted candidates will be notified.

Raymond Ler: Registration No.: R1876114 | EA License No.: 21S0433 | Company Registration No.: 201314085N

• Position : Project Engineer (A&A Construction/Restoration Team) - Up to $6,000 + Bonus
• Office Location :East - Aljunied
• Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 1 year of experience with restoration projects.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
  Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Summary:

As a Field Service Engineer, you will be responsible for performing service, troubleshooting, and installation jobs for advanced semiconductor manufacturing equipment. This position involves working with cutting-edge technology and offers opportunities for frequent travel across Southeast Asia. The ideal candidate should have a strong technical background, be willing to travel, and possess excellent problem-solving skills.

Company Background:

The employer is a leading semiconductor supplier in Singapore, providing advanced production systems and technical services, specializing in imaging and inspection machinery.

• Employment Type: Full-time
• Position: Field Service Engineer
• Industry: Semiconductor Supplier
• Location: Kaki Bukit, Singapore
• Working Hours: 5 days, Monday to Friday, 8:30 a.m. - 5:00 p.m.
• Remuneration: $2,400 – $3,000 Monthly Base Salary (Depending on experience)

What Candidates Need to Know:

• Technical Expertise: You’ll be expected to handle machine setup, installation, troubleshooting, and service jobs both locally and overseas.
• Travel Opportunities: The role involves frequent travel within Southeast Asia, including Malaysia, Thailand, and Japan, with initial training overseas.
• Experience: Prior experience in a cleanroom environment is preferred, though not mandatory.

Job Responsibilities:

• Service & Installation: Perform service, troubleshooting, installation, and repair of semiconductor production equipment.
• Inventory Control: Manage spare parts inventory and maintain accurate records.
• Technical Support: Assist with machine modification and setup.

Requirements:

• Education: Nitec, Higher Nitec, or Diploma in Electronics, Electrical, or Microelectronics Engineering.
• Technical Skills: Knowledge of machine setup, troubleshooting, and repair is essential.
• Travel Flexibility: Willingness to travel frequently across Southeast Asia.

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Chemical Engineer (WWT)

Location: Tuas View

(Company Transport / Transport Allowance if candidate travel to work by themselves)

Working Hours: Monday to Friday (8am – 5pm); Sat (8am – 12pm) / Shift Work (Day: 8am –8pm, Night :8pm – 8am)

Basic: $3500 to $3800 + Entitled to overtime/shift allowances

If interested, submit your resume and contact me here

Whatsapp +65 8854 1564 (Albert) | https://wa.me/6588541564

Yap Teck Huat Reg No: R24122623

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities:

• Study and review the equipment and Design treatment processes in wastewater treatment plants. Be responsible for the water quality compliance for individual WWTP plant.
• Assist in maintaining proper maintenance and safety integrity of plant. Ensuring all equipment is in working condition with minimum downtime and regular servicing is carried out
• Ensure all designated equipment calibrations and inspections are up to date
• Work closely with PSM team and lab department on waste flow and waste treatment method
• Assist in promoting WSH activities to operator(s).
• Assist in optimization of operation treatment, manpower allocation as well as continuous improvement on WWTP operation
• Ensure the treated wastewater compliance with sewer discharge limit.
• Adhere to all safety requirements within the plant, such as safe work practices, SOP.

Requirements:

• Bachelor’s degree in chemistry
• Min 2 years of experience related to water treatment plant

The Job:

• Network security management
• Web security management
• End point security management
• Messaging security management
• Security & vulnerability management
• Automation of management tasks

What You’ll Need:

• Degree/Diploma in Computer-related disciplines
• At least 5 years of experience that covers management of enterprise security solution

Interested applicants can send their detailed resumes to [email protected]or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

Senior/Staff Software Engineer | Min. 8yrs Exp in Industrial Automation (C++, C#) | Programmer | Woodlands

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $6,000 to $12,000
Location: Woodlands

Job Responsibilities

• Design, develop, test, and debug robust and efficient industrial automation software using C++, C# & WPF.
• Utilize Windows API and libraries for interaction with hardware components.
• Program machine functionalities using motion control cards for precise movement control.
• Integrate with distributed I/O systems to gather sensor data and control actuators.
• Implement robust communication protocols for data exchange between software and hardware components.
• Leverage advanced threading techniques and synchronization mechanisms for optimal application performance.
• Employ advanced memory management practices, including memory mapped files, file mapping objects, and memory sections, to ensure efficient resource utilization.
• Utilize the C++ Standard Library and templates effectively for code optimization and reusability.
• Understand and utilize Windows objects like events and mutexes for thread synchronization and communication.
• (Optional) Develop user interfaces using frameworks like WPF or WinUI to provide a user friendly experience for monitoring and control (if applicable).
• Write well-documented, maintainable, and efficient code adhering to best practices.
• Collaborate with electrical engineers and mechanical engineers to understand system requirements and ensure software meets functional specifications.
• Participate in code reviews and provide constructive feedback to fellow developers.
• Stay up-to-date with the latest advancements in C++, industrial automation technologies, and relevant libraries.

Job Requirement:

• Bachelor’s degree in computer science, software engineering, or a related field
• Minimum 8 years of experience developing industrial automation software using C++, C# & WPF.
• Proven experience with programming motion control cards and distributed I/O systems.
• Strong understanding of Windows API development and memory management techniques.
• In-depth knowledge of the C++ Standard Library and its functionalities, including templates.
• Experience with Windows objects like events and mutexes.
• Familiarity with Windows GDI and GDI+ is a plus (for graphics-related tasks).
• Experience with Borland/Embarcadero C++ Builder VCL platforms is a strong plus.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Senior/Staff Software Engineer | Min. 8yrs Exp in Industrial Automation (C++, C#) | Programmer | Woodlands

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $6,000 to $12,000
Location: Woodlands

Job Responsibilities

• Design, develop, test, and debug robust and efficient industrial automation software using C++, C# & WPF.
• Utilize Windows API and libraries for interaction with hardware components.
• Program machine functionalities using motion control cards for precise movement control.
• Integrate with distributed I/O systems to gather sensor data and control actuators.
• Implement robust communication protocols for data exchange between software and hardware components.
• Leverage advanced threading techniques and synchronization mechanisms for optimal application performance.
• Employ advanced memory management practices, including memory mapped files, file mapping objects, and memory sections, to ensure efficient resource utilization.
• Utilize the C++ Standard Library and templates effectively for code optimization and reusability.
• Understand and utilize Windows objects like events and mutexes for thread synchronization and communication.
• (Optional) Develop user interfaces using frameworks like WPF or WinUI to provide a user friendly experience for monitoring and control (if applicable).
• Write well-documented, maintainable, and efficient code adhering to best practices.
• Collaborate with electrical engineers and mechanical engineers to understand system requirements and ensure software meets functional specifications.
• Participate in code reviews and provide constructive feedback to fellow developers.
• Stay up-to-date with the latest advancements in C++, industrial automation technologies, and relevant libraries.

Job Requirement:

• Bachelor’s degree in computer science, software engineering, or a related field
• Minimum 8 years of experience developing industrial automation software using C++, C# & WPF.
• Proven experience with programming motion control cards and distributed I/O systems.
• Strong understanding of Windows API development and memory management techniques.
• In-depth knowledge of the C++ Standard Library and its functionalities, including templates.
• Experience with Windows objects like events and mutexes.
• Familiarity with Windows GDI and GDI+ is a plus (for graphics-related tasks).
• Experience with Borland/Embarcadero C++ Builder VCL platforms is a strong plus.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Service Engineer / Technical Specialist | 5 Days Up to $3k | Loyang

Location: Loyang Way
Working Days: Mon - Fri
Working hours : 830 a.m. to 530p.m.
Salary : $2,500 - $3,000

Requirements

• NTC2 / Diploma in Electronics/Mechanical/Mechatronics Engineering
• Preferably with experience in Vacuum Technology and/or Wafer Testing.
• Training provided
• Travelling required.

Responsibilities

• To provide support and application for Wafer Sort & Testing Related Equipment.
• Service & Calibration of Hi Vacuum Pumps and related equipment for the semiconductor industry.

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

Benefit:

• 5 days Work
• Basic Salary : $2000 - $3000
• Good Allowance, Bonus and AWS

Job Scope:

Assistant Engineer

• Perform servicing, maintenance, and troubleshooting on equipment and system the at site
• Ensure the equipment is functionality
• Involve of Installation work for machine
• Partner with other technicians and engineer to perform daily operation
• Respond and attend to fault calls from client
• Ensure Timely check the equipment to ensure they are in workable condition
• Planning and undertaking scheduled maintenance

Requirement

• Possess at least NITEC and relevant field
• 2 years relevant experiences will be advantage
• Entry level welcome to apply, training will be provided

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

• Position : M&E Engineer/Coordinator (Construction/A&A) - Up to $5,500 - ALL WELCOME
• Location : Based on Project Sites
• Working hours : Monday to Saturday | 8am to 6pm (Saturday working hours based on site)
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing OA/QC inspections to meet wi construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendor
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub contractors.

Requirements:

• Minimum of Diploma in M&E Engineering or relevant; with at least 2 years of experience.
• Willing to work on weekends if site required.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job

listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Design and draft of Electrical Single Line / Panel Diagram according to customer technical specification
• Maintain, update and correct drawings as needed, and ensure its accuracy and completeness
• Collaborate with project teams to facilitate drawing preparation
• Respond promptly to inquiries and request relating to the drawings

Requirements:

· Diploma/Degree in Electrical/Electronic Engineering from a recognised Polytechnic/University;

· Knowledge in Autocad and Eplan;

· Possession of team spirit, good communication and organising skills;

· A good team player with strong collaboration and stakeholders’ management skills;

· Excellent organizing skills, spoken and written communication skills.

· Our benefits and compensation for permanent position are as follows:

· Salary for experience candidates will be considered based on the years of experience and our internal salary structure

· 1 month AWS

· Variable Bonus ranging up to 6 months depending on individual and company performance

· Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

· Working days: Monday to Friday (1 day work from home per week)

· Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

· 18 days up to 21 days for executive (Engineer and above)

· Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

· Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

· Term Life

· Personal Accident

· Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

· Flex Dollars of $500 per financial year

· Free annual year-end Health Check-Up

· Monthly Birthday Party Celebration

· Monthly Sports Activities

· New Born Gift

· CSR Initiatives

· Department Bonding Activities

· Biennial team building and staff appreciation dinner

· Gym Corner for employees to exercise

·

· Good Pay + Good allowance + Good Bonus

· Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

· Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• The successful candidate will be expected to provide technical support and assistance for Microsoft Power Platform. The ideal candidate should have a strong understanding of the Power Platform and Office 365 suite of applications and possess excellent troubleshooting and problem solving skills.

Responsibilities:

• Ensuring the operational health of the Power Platform environment including security, availability, performance, interoperability and reliability.
• Provide technical/advisory support for Power Platform applications, including Power Applications, Power Automate, and Power Virtual Agents.
• Troubleshoot and resolve issues related to Power Platform applications.
• Collaborate with other IT teams to develop and implement best practices for Power Platform usage, security, and governance and ensure the overall health of the environment.
• Develop and maintain documentation related to support processes and procedures.
• Explore, implement and maintain solutions to improve operational and governance of the platform.
• Stay updated with the latest features, updates, and security patches and communicate relevant information to users and stakeholders when required.
• Provide after-hours support as needed
• Minimum 3 years of experience in supporting, maintaining, and troubleshooting Power Platform applications.
• Possess advanced knowledge of Power Platform, PowerApps, Power Automate, Power Virtual Agents, on-premises data gateway.
• Experience in Power platform development.
• Strong understanding of M365 architecture, services, and features.
• Excellent troubleshooting skills and the ability to solve complex technical problems.
• Strong communication skills and the ability to work effectively with end-users and IT teams.
• Ability to learn new technologies quickly.
• Positive attitude towards work and a desire to learn.
• Knowledge of PowerShell and scripting is a plus.
• System integration knowledge and experience will be an advantage

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Software Engineer (Computer Vision, C++) | Permanent

Responsibilities

• To conduct Research & Development in Image Processing / Computer Vision Algorithm for automated optical inspection systems
• Design and develop software for automated Computer Vision Equipment
• Software development for GUI, big data management, multi-threaded programming
• Design & Develop Image Processing / Computer Vision Algorithm Development and invole in Software Development Life Cycle

Requirements:

• PHD / Masters / Degree in engineering discipline.
• Knowledge in programming skills in Visual Studio Development Environment with proficient in C++
• Strong Knowledge in vision inspection / computer vision / image processing skill is required
• Knowledge in programming languages such as C# is an added advantage
• Knowledge in Deep Learning (AI) for Defect Classification is a plus

Additional info:

• Company industry: Semicon Manufacturing
• Location: Kallang

GMP Recruitment Services (S) Pte Ltd | EA Licence : 09C3051 | VO UYEN AI LINH | Registration No: R 22109232

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Overview: -

• Monthly Salary: Up to $4000 + AWB + Bonus (depend on EXP)
• Location: Loyang, Pasir Ris
• 5 Days (Monday to Friday), Office Hours

Your Responsibilities: -

• Oversee and assist the program manager to oversee the project to ensure product deliver is within the stipulated time.
• Manage existing clients and liaise with them on the project schedule.
• Liaise with client regarding product specification & requirements, cost, quality of a project and provide a quotation on it.
• Coordinate with internal team member (tool designer and engineering on design for manufacturing (DFM) to ensure the product created meet client expectation.

You will need: -

• Manufacturing / Manufacturing Design industry experience will be a plus
• Able to read AUTOCAD drawing

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

About the Client:

Our client is a reputed IT Services Company

Responsibilities:

• Responsible to develop the test plans, test cases, and test scripts, automate recurring tests, and troubleshoot and report discrepancies with the product
• This position is responsible for supporting the planning, design and execution of system testing on simple to complex implementations
• Ensure that all deliverables including but not limited to feature files/test cases, test results, automated test scripts, automated regression test results etc., are submitted timely and reviewed by the test lead.
• Work closely with the test lead to devise test strategies for the applications/projects assigned. Ensure that the test strategy is implemented as per plan.
• Ensure that all domain, application, functional and technical issues are duly to the test lead for necessary advice, resolution, and support.

Requirements:

• Bachelors or higher degree preferably in Computer Science or IT
• 7 years of experience in manual and automation testing on web applications
• Highly proficient in test automation development using Java, Selenium WebDriver, Cucumber, REST-Assured, JMeter
• Hands-on experience with Agile methodologies such as Scrum/Kanban
• Ability to transform manual test cases into modular automated tests
• Know-how with Java, Github, Gitlab, SOAP, REST API are plus points.
• Test automation experience on Selenium, Tosca, Robot Framework
• Strong hands-on with Oracle PL/SQL programming
• Strong understanding of Wealth Management - Capital Market business domain

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret to inform that only shortlisted candidates will be contacted

PERSOLKELLY Singapore Pte Ltd
EA License No. 01C4394
EA Reg No: R1551772 (Kankanala Lakshmi Prasanna)

**********************************

The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited.

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries.

All parties involved in any form of workforce engagement are to strictly adhere to prevailing regulations and laws that govern local fair employment practices, and to invest reasonable efforts in building a strong Singaporean core workforce, recruit and select candidates based on merit and prohibit discrimination based on age, race, gender, religion, marital status and family responsibility or disability. For more information, please refer to MOM and TAFEP websites.

**********************************

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Working Day: Monday - Friday 8.30 am to 5.30 pm
• Working Location: Pioneer
• Salary: $3,500 – $4,000

Job Responsibilities

• To provide product and technical consultation to customers.
• Product training for customers.
• ISO9001:2015 and 450001 documentation work.
• Review of daily service jobs performed by technicians.
• Meeting with customer to resolve any technical issues.

Job Requirement

• Degree/Diploma in Electrical & Electronics Engineering.
• With relevant working experience in power electronics, battery chargers, UPS and its related product would be an advantage
• Familiar with ISO9001:2015 AND 450001.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

About the job:

• Implement and manage Windows-based infrastructure and associated technologies.
• Monitor and maintain the health, performance, and security of Windows servers and systems.
• Administer Active Directory, Group Policy, DNS, DHCP, and related services.
• Configure and troubleshoot Hypervisor Nutanix virtualization platforms (e.g., VMware, Hyper-V).
• Install, configure, and manage Windows servers and services, including IIS, SQL Server, Exchange 2019 and Skype 2019
• Collaborate with cross-functional teams to implement and support enterprise-wide solutions.
• Perform routine system and application updates, patches, and upgrades.
• Develop and maintain documentation related to system configurations, processes, and procedures.
• Provide level 2 and/or level 3 support for Windows-related issues.
• Participate in on-call rotation for after-hours support as needed.

About you:

• Tertiary education in in Computer Science, Information Technology, or related field.
• At least 3 to 5 years of experience in administering Windows-based systems, Microsoft SCOM Experience, and infrastructure.
• Proficiency in Windows Server operating systems (2019).
• Strong understanding of Active Directory, Group Policy, DNS, and DHCP.
• Experience with virtualization platforms such as VMware and Hyper-V.
• Knowledge of scripting languages (e.g., PowerShell) for automation and scripting tasks.
• Familiarity with monitoring tools and systems management solutions.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and interpersonal abilities.
• Certifications such as MCSE, MCSA, or equivalent are a plus.

Additional Preferred Skills:

• Microsoft System Center Suite (SCVMM, SCOM, SCCM, WSUS)
• Exchange 2019 and Skype 2019 administration
• Netbackup 10.x and Data Domain for backup and recovery solutions
• Nutanix HCI for virtualization and storage solutions
• NESSUS for vulnerability assessment
• F5 load balancers and RSA security solutions
• Splunk for log management and data analysis

Benefits:

· $3,800 higher + AWS

· 5 Days work week 8.30am-5.30pm

· Tablet, phone and safety boot provided

Job Description:

Reporting to the Service Manager, the Automatic Door Systems Specialist is responsible for the installation, maintenance, and troubleshooting of automatic door systems. This role requires technical expertise in mechanical, electrical, and electronic components, as well as strong problem-solving skills to ensure the efficient operation of automatic entrances.

Perform maintenance, troubleshooting, and repair of pedestrian automatic doors. Understand technical documents and compile and edit information for dissemination. Provide technical support and service to customers, ensuring high levels of customer satisfaction. Coordinate with the service manager and other team members to ensure efficient service delivery. Ensure all work complies with company standards and safety regulations

Qualifications:

· Minimum Diploma in Engineering/Mechanical Engineering or equivalent

· Minimum 3 years work experience on automatic doors (shopping mall, pedestrian)

· Proactive, detail-oriented, and capable of working independently in the field.

· Possess a Class 3 Driving License

· Proficiency in Chinese and English language to communicate with clients

· Geographical work coverage: Singapore inclusive of the islands and offshore locations.