We are excited to announce an additional headcount as our company is expanding. We are looking for a candidate who meets the requirements below. If you think you are the “ONE,” we would love to have you join our team.

What You Will Do:

- Perform installation, setup, commissioning, routine maintenance, and troubleshooting of scientific equipment at customer sites.

- Prepare service test reports, mapping reports, and IQ/OQ documents for customers.

- Provide excellent customer service through product knowledge, handling customer feedback, prompt responses, and collaborating closely with the team.

- Take ownership of all assigned projects and assist with other tasks as required and assigned by the Superior.

What We Look For:

- Higher Nitec/Diploma in Engineering field

- Candidates without experience will be considered but must have a willingness to learn.

- Ability to work overtime when necessary.

- Willingness to grow together with the company.

What We Offer:

- Competitive salary

- Comprehensive benefits package

- On-the-job/cross-training opportunities

- Encouraging and collaborative team environment

If you are ready to take on this exciting opportunity to grow with the team in a dynamic, start-up environment, wait no further and share your profile with us to discuss more.

Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function / Primary Goals / Objectives:

• Lead site wide implementation of Food Safety initiatives. Consulting with Division Food Safety SME where necessary.
• Drive and implement continuous improvements to enhance quality and food safety in our products in a cost effective manner.
• Develop training materials and conduct training as part of roll out of Food Safety initiatives.
• Monitor and report project milestones. Ensures timely and successful execution of changes.
• Improve Food Safety culture and raise awareness of Food Safety through various initiatives.
• Improve site Hazard Analysis Critical Control Point (HACCP) system.

Major Responsibilities:

• Establish project milestones and ensures tracking for timely completion.
• Training of cross functional team on the new Food Safety initiatives.
• Implement Change Management Tools (example, CLRS) to ensure successful roll out of Food Safety initiatives.
• Drive continuous improvement projects to drive efficiency and cost for the plant.
• Establish Standard Operating Procedures for new Food Safety initiatives.
• Implement improvements to site HACCP and risk assessment.
• Any other duties as assigned by Supervisor.

Requirements:

• Bachelors’ Degree in engineering (chemical / biomedical), manufacturing, industrial management, or a related field.
• Min 3 years of experience in quality project management, preferably in food/pharmaceutical manufacturing industry.
• Good practical knowledge of GMP in food / pharmaceutical manufacturing.
• Good leadership and problem-solving skill.
• Good communication and report writing skill.
• Good project management skill.
• Team player with initiative, drive, good communication skills and a strong command of written English.
• Knowledge in HACCP and risk assessment.
• Knowledge in food engineering and experience in a dairy / nutritional industry would be advantageous.
• Knowledge and experience in driving cultural changes in organization is preferred.

*Kindly note this position is based in Tuas and it is a 12-month contract opportunity.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Data Quality Engineer/Analyst

Internal Code: A24122

This is a healthcare application:

• Mobile application (iOS and Android)
• Dashboard (React)

What will you do?

Support the development and business teams in unit testing and archiving data, engineered features, and algorithmic inputs/outputs throughout the data pipeline and to support analytics.

Proven experience as a data engineer/ data analyst in mobile app development projects and administrative dashboards.

1. Create unit tests throughout the data and algorithms domain:

• Work with engineering and business teams to implement wide-coverage unit tests of data and engineered features at different stages throughout the data collection and processing pipeline
• Create unit tests of inputs to and outputs from the algorithms that drive the clinical service
• The unit tests include validation of the inputs and outputs of black-box machine learning algorithms
• Establish a regular process to execute the tests and document their outcomes as a part of our product development and release lifecycle

2. Implement and refine mechanisms to continuously archive the state of algorithmic inputs and outputs:

• Implement a process of taking snapshots of data/features input into algorithms necessary to recreate their outputs/predictions at any point in the past during the service
• Communicate requirements to the software development team

3. Assist in the successful delivery of regular service analytics and reports:

• Support the business and analytics teams in their daily and weekly delivery of reports on data completion, user engagement, and algorithm actions by addressing any data quality and validation requirements.

What are we looking for?

• Bachelor's Degree in computer science, engineering, business analytics, technology, or a related field.
• Minimum of 2 years of experience in data engineering, data analytics, or data product management roles within the tech industry. Experience in healthcare is a plus.
• Ability to implement tests in Python.
• Experience in machine learning algorithms
• Good understanding of the validation requirements of an algorithmic product. Knowledge of healthcare regulation and auditing requirements is a plus.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Description & Requirements

• Minimum Degree in Mechatronics/Computer Science or Equivalent.
• 5 years’ of experience in programming on Windows
• Proficiency with C++, VC++, MFC, SQL and OOP.
• Must have experience in Semi Equipment SECS/GEM Protocol
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.

Key Responsibilities:

• Design and develop machine control software for automated semiconductor equipment.
• Integrate Software or OEM Equipment
• Conduct Analysis, recommend changes to improve equipment performance
• Develop Control Software
• Provide Support for on-site installation

Responsibilities

• Design and implement electrical systems for construction projects.
• Prepare detailed project plans and specifications.
• Conduct site inspections to ensure compliance with electrical codes and standards.
• Troubleshoot and resolve electrical issues on-site.
• Coordinate with project managers, contractors, and other engineers.
• Ensure all electrical work is completed on time and within budget.
• Maintain accurate records of all electrical work performed.
• Provide technical support and guidance to other team members.
• Review and approve electrical designs and plans.
• Ensure all electrical systems are safe and operational.
• Conduct risk assessments and implement safety measures.
• Stay up-to-date with the latest electrical engineering technologies and practices.
• Prepare and present reports on project progress and electrical issues.
• Manage and supervise electrical contractors and subcontractors.
• Ensure compliance with all relevant regulations and standards.
• Participate in project meetings and provide input on electrical matters.
• Develop and implement maintenance schedules for electrical systems.
• Assist in the procurement of electrical materials and equipment.
• Provide raining and support to junior engineers and technicians.

Requirements

• Bachelor's degree or Diploma in Electrical Engineering or a related field.
• Minimum of 3 years of experience in electrical engineering

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS system experience and DeltaV Batch experience required
• Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

Mon to Fri - 8am to 5.30pm

Responsibilities:

- Responsible for daily basis service work and handling new installation projects and testing commissions for air-cooled and water-cooled chiller.

- Routine servicing of Commercial Chillers (Air-cooled & Water-cooled chillers) onsite.

- Routine duties includes maintenance, troubleshooting and repair to commercial chillers, AHU, FCU, VRV CRAC, VRV Systems, including tear down and rebuild (overhauling).

- Able to read specifications and drawings by contractors.

- Inspecting and testing systems to verify system compliance with plans and specifications and to detect/locate malfunctions.

- Organise and keep up with records and report all faults, deficiencies and other unusual occurrences, as well as the time and materials expended on work orders.

- Responsible for adjusting system controls to settings recommended by manufacturer to balance systems handling for all types of refrigerant.

Requirements:

- Diploma/Degree in Mechanical Engineering

- Minimum 2 years of technical experience with knowledge in air-conditioning, Chiller, ACMV or HVAC systems

- Resourceful with good analytical and interpersonal skills

- Strong communication skills

- Good team player with ability to lead and multi-task

- Possess Class 3 driving license will be an added advantage

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

Mon to Fri: 9am to 5:30pm

Objective:

We are looking for a Field Application Engineer to drive new projects and business pipelines for FY24 growth.

Responsibilities:

• Responsible for pre & post sales requirements of Company’s Power Quality products (preparing technical documents & commercial proposals)

• Provides technical support to distributors and key account customer for troubleshooting, on-site testing and commissioning

• Provides trainings to distributors and customers to enhance their capabilities

• Responsible for design-in (spec-in) of company’s products with the distributor in the appointed territory and market segments, achieve yearly design-in targets

• Lookout for opportunities to cross out competitor part

• Coordinate PQ Application and On-site Measurement Services in line with the company strategy

• Maintains good relationship with both end-users, local distributors, external test laboratories and build customer loyalty through field visits

• Maintenance of existing customers base and achieve development of new potential customers.

• Effective use of CRM/CAS system to record key activities, including customer visit/call reports and opportunities

• Able to communicate and work well with internal departments.

• Any other responsibilities as assigned by the Strategic Account Manager or/and Sales Manager

Job Requirements:

• Possess fundamental PQ Harmonic knowledge and application.

• Basic knowledge of EMC / EMI compliance is a plus

• Bachelor’s degree or equivalent in Electrical/Electronics/Mechatronics Engineering or other relevant majors

• Prefer minimum 3 years technical experience in the field of industrial products

• Able to operate common test equipment like voltage meter, clamp meter, oscilloscope, analyzer, etc.

• Good interpersonal and communication skills

• Well-versed in basic MS Office tools (eg. Word, Excel) and SAP (preferred)

• Interpersonal savvy

• Good follow up and consultative approach attitude

• Able to work independently and resourceful

What we offer:

• Attractive remuneration and incentive package

• Annual leave, medical welfare and insurance

• Provide opportunities for career advancement within the company

C2D Solutions Pte Ltd is Hiring!!!

Only Singaporean and SPR need to apply!

Web: www.c2d.com.sg

Tel: +65 6392 2949

Job Description: Mechanical & Electrical Engineer

Company Overview

• C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimisation.
• We were established in 2012 and operates as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions.
• We have a team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers to ensure first-rate engineering solutions for our clients.
• We have grown over the years and are continuously increasing our market presence and are seeking like-minded individuals to join our team as a Mechanical & Electrical Engineer.

Job Responsibilities:

• Design and commissioning of building mechanical & electrical systems including, fire protection, air-conditioning & mechanical ventilation, smoke control systems, power distribution systems, lighting systems, etc.
• Perform Computational Fluid Dynamics simulations to design & optimize ventilation, pollution control and fire & smoke control systems.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements.
• Participate in Testing & Commissioning phase of completed mechanical & electrical installations.
• Appointed engineers will be attached to Senior Engineers who will provide Internal Training and Supervision.

Why you should apply:

1. We are a progressive company that place equal emphasis on personal and professional growth.
2. Appointed engineers with interest and potential will beoffered sponsorship to continue professional upgrading tofurther their engineering career development.
3. Career development includes the opportunity to register as aProfessional Engineer (PE) and/or Fire Safety Engineer (FSE).
4. Opportunities to work on dynamic and impactful buildingprojects
5. Our projects’ portfolio includes pharmaceutical & semi-conductor manufacturing facilities, air & land infra-structurefacilities, hospitality & conventions facilities, etc.

C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimization. We were establishedin 2012 and operate as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions. Our team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers ensure first-rate engineering solutions for our clients. Since 2012 we have grown exponentially and are continuously increasing our market presence and are seeking like-minded individuals with mechanical engineering or building services degrees to join our team as a Mechanical & Electrical Engineer.

Qualifications:

- 3-5 years working experience in C&S Engineering Consultancy Firm.

- Degree is recognized by Professional Engineers Board (PEB), Singapore.

- Preferably, has passed FEE, examination prescribed by PEB.

- Conversant with latest design codes and authority requirements.

- Competency in design software such as ETABS, SAFE, SAP2000, GSA, IDEA StatiCa, Tekla etc.

- Able to work independently to support the QP and directors.

- A team player and to carry out tasks/duties in a positive and dignified manner

Responsibilities:

- Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.

- Assist in producing tender specifications and design requirements for calling of tender contracts.

- Attend project/technical meetings with authorities, developers and contractors.

- Involve in project planning, implementation and close monitoring of projects.

- Project coordination including submission to local authorities and liaison during the construction stage.

- Liaise with clients, consultants and authorities on technical matters.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

THE ROLE:

To validate and characterize the most cut edge SerDes design including PAM4 224G transceiver on the most advance technology node. Using the latest measuring equipment the semiconductor industry has to offer to benchmark AMD’s SerDes against the challenging industry standard.

THE PERSON:

We are looking for a meticulous and motivated engineer to join the validation teams.

KEY RESPONSIBILITIES:

• Post Silicon Validation of high speed SerDes
• Understand the industry requirements and specification for high speed IO
• Develop validation methodology to validate new industry standard and requirements.
• Characterize the latest SerDes design
• SerDes debug with designers on Silicon
• Tuned the latest design to performance at the most optimum setting
• Generate specification base on measured results
• Work with remote teams to co-ordinate distributed task.
• Support FAE on customer’s issues relating to high Speed Ios

PREFERRED EXPERIENCE:

• Experience in high speed IO SerDes post-silicon validation.
• In-depth knowledge of the latest industry standards such as PCIe, Display Port, JESD, SDI, OIF-CEI-11G/25G/56G/112G-VSR/SR/MR/LR, IEEE 802.3 KR/CR/CAUI/GAUI etc.
• Strong programming/scripting skills coding languages such as Python, C/C++, TCL for firmware development, test methodology development and test automation
• Extensive experience with common lab equipment, including BERT, analyzers, oscilloscopes, PNA/VNA etc
• Knowledge of SerDes general architectures and link level system analysis
• Good understanding in transmission line theory and electromagnetic theory
• Experience in system level serial link analysis and simulation, system performance optimization and standard/architecture level study using tools such as Matlab, ADS etc.

ACADEMIC CREDENTIALS:

• Bachelors/Masters degree in Electrical/Electronics Engineering

LOCATION:

Singapore

On your day to day:

• Handle multiple projects and provide network design and deployment support from project initiation to closure.
• Follow Citi network standards and configuration templates to prepare Network Design Documents (NDD) and submit for review and approval. Create Build Packages that includes implementation plans, test plans and network changes.
• Oversee the deployment of Build Packages on the corporate data network. Implement network changes during the allowed weekend green zone window.
• For some large/complex projects, you will be required to represent network domain in a virtual team and effectively communicate and liaise with business/technical stream owners.
• Assist with knowledge transfer of new products to internal teams.
• Assist in the development of & implementation of processes to allow repeatable designs with the view of provisioning automation and efficiencies.
• Prepare and submit all required project documentations for audit purpose & project closure

Qualifications:

• Proven experience (5+ years) working with Cisco and Arista network devices (routers and switches).
• Minimum of at least CCNP or equivalent.
• Strong working knowledge of following routing protocols: BGP, OSPF.
• Experience on WAN technology, e.g. Metro Ethernet, MPLS. VPLS, IPLC etc.
• Preferable with working experience on using Multicast in a Cisco/Arista environment.
• Preferable with working experience in large financial or banking network operation/implementation team.
• Ability to effectively communicate to internal clients through all available mediums (verbal, listening, writing, presenting).
• Willing to work during weekends for implementation of network changes.
• Willing to work for extended working hours when needed.
• PC Literate (Word, Excel, PowerPoint)

ROLE DESCRIPTION SUMMARY

Thales is seeking suitable candidate for the position of Service support engineer.

You will be maintaining and troubleshooting the hardware infrastructure and systems for a mission-critical Seamless Identity Management Platform for Experience (SIMPLE) system that Thales Solutions Asia (TSA) have designed for Singapore Changi Airport.

You will be part of a team of dedicated engineers that demonstrate superior technical competency in ensuring system availability, performance and security

KEY ACTIVITIES AND RESPONSIBILITIES

As aField Service Engineer, you are accountable for:

· Field Support. To carry out Corrective Maintenance (CM) as a result of failure of the hardware and software related to SIMPLE. To restore the system to its operational condition. To monitor and maintain the records of the overall system operational availability and reliability, including Mean Time Between Failure (MTBF), Mean Time to Repair (MTTR), system downtime duration and the types of hardware defects as well as all related software versions, patches.

· Field Testing. To carry out software testing on the system whenever there is a new software bug fixes. To ensure the correct configuration of the system is loaded for software / system testing and before the system is used for production.

· Spares Services. To manage the spares provisioning, support and test equipment and other tools that are stored at Authority site. To undertake store keeping functions in respect of receipt, issue and disposal. To carry out serviceability check on the spares and to ensure prompt and appropriate action is taken to rectify any fault on the spares. To monitor the end-of-life and end-of-support status of the spares and installed hardware.

· Preventive Maintenance (PM). To carry out PM on the hardware to retain the system in the specified operational condition in accordance to the planned maintenance schedule. In carrying out the PM, to follow the approved PM checklists to perform calibration, servicing and verification of system configurations. To submit the PM report after each PM.

· Calibration Services. To liaise with vendor to perform calibration services on the test equipment that are used for the preventive maintenance.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· 2 shifts of 12 hours, 24x7 operation

· Able to cope in a highly pressured fast-paced environment

· Prior working experience in any Server / Network / Uninterruptible Power System / Security products such as Firewall, PIM and PAM and Server Virtualization will be an added advantage

· Customer orientated with high level of service attitude

· Good listening and analytical skills

· Hardworking, outgoing and enthusiastic

· Positive working attitude

· Team player, and also able to work independently and with little supervision

· Able to thrive in a dynamic environment

· Able to understand the system and architecture diagrams

· Able to understand the user operation environment

· Willingness to pick up new technologies

· Perform other job responsibilities as and when assigned

Education

Diploma / Bachelor’s Degree in IT/Engineering discipline

CCNA certified

Experience

Minimally 1-2 years of experience in supporting network, security, server and UPS

Minimally 1-2 years of experience in supporting mission critical systems with a stringent SLA of 99.9%

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices will be an added advantage

We are seeking a talented Frontend Software Engineer to develop and roll out the next generation of our advanced tools to support autonomous driving. As part of the Map Creator team, you will play a critical role in building a sophisticated web-based application that produces semantic map annotations for our AVs. We focus on streamlining end-user workflows, creating performant visualization and editing of huge scale map data, and automating map production. We support the evolving map data needs of our researchers and engineers.

This is a hybrid position in our Singapore office.

What you'll be doing:

• Design, develop, and deploy scalable frontend solutions for our web-based map visualizations and editors.
• Write clean, idiomatic, and maintainable code that adheres to best practices.
• Optimize applications for peak performance and scalability to handle huge scale data.
• Collaborate with machine learning teams to integrate automation into the annotation process, for maximum efficiency.

What we’re looking for:

• BS or MS in Computer Science or related field
• 2+ years professional experience as front end software engineer
• Good understanding of modern JavaScript code and React framework
• Experience in profiling and optimizing web performance.
• Strong problem-solving skills and a keen aptitude for learning new technologies and methodologies.
• Excellent communication and collaboration skills, with the ability to engage effectively with both technical teams and non-technical stakeholders.

Job Responsibilities:

• Responsible for the operation, maintenance, management and engineering improvement of various systems in the factory, and provide stable supply and quality to customers.
• Operation and maintenance of ultrapure water manufacturing system.
• Operation and maintenance of wastewater treatment system.
• Operation and maintenance of process cooling water system.
• System improvement project and HOOKUP planning and execution

Job Requirements:

• Bachelor's Degree in Mechanical / Electrical & Electronic / Environmental / Chemical Engineering
• At least 1 years of relevant experience in semiconductor industry
• Candidate with relevant certificates are preferred.
• Candidate with FAB facilities systems operation experience are preferred
• Creative problem-solving and troubleshooting skills.
• Emergency response capability.
• Excellent critical thinking skills and a high level of numeracy.
• Good communication and interpersonal skills.
• Able to work independently and able to handle stress effectively.
• Proficient in PPT, Excel & presentation skill

Job Description:

We are seeking a talented and motivated Automation Engineer (Robotics / Process) to join our team. As an Automation Engineer, you will play a crucial role in designing, developing, implementing, and maintaining automation solutions to streamline our processes, improve efficiency, and enhance product quality. You will work in a dynamic environment that encourages innovation and continuous improvement.

Responsibilities:

1. Automation Framework Development
   Design, develop, and maintain automation frameworks for software and hardware testing, process automation, and data integration.
2. Collaboration
   Work with cross-functional teams to understand automation requirements and deliver solutions that meet business needs.
3. Documentation
   Write and maintain efficient, reusable documentation for automated tasks and prepare test cases.
4. Efficiency Improvement
   Identify areas where automation can improve operational efficiency and minimize manual intervention.
5. System Maintenance
   Maintain and troubleshoot existing automation systems, applying necessary updates and enhancements.
6. Industry Awareness
   Stay informed about industry trends and emerging technologies to recommend and implement improvements.
7. Technical Support
   Provide training and technical support to team members on automation tools and best practices.
8. Process Documentation
   Record automation processes, test cases, and results for reference and audit purposes.
9. Project Coordination
   Coordinate meetings with business stakeholders to ensure timely delivery of automation solutions.

Key Attributes:

• Consulting Skills: Ability to analyze business requirements, propose realistic solutions, and ensure project control in alignment with business needs.
• Problem Solving: Analyze, implement, and support solutions until deliverables meet expectations.
• Support Role: Handle tickets and assist in the support process.
• Requirement Gathering: Collaborate with clients to define and gather business requirements.

Qualifications:

• Experience: 4–7 years of relevant work experience in automation engineering, with a focus on robotics and process automation.
• Technical Skills: Proficiency in Linux, VBA, and relevant programming languages.
• Development Practices: Experience with CI/CD (Continuous Integration and Continuous Deployment) practices.
• Analytical Ability: Strong problem-solving skills and attention to detail.
• Soft Skills: Excellent communication and collaboration abilities.
• Adaptability: Ability to thrive in a fast-paced, agile development environment.
• Certifications (Preferred): Certification in automation or related fields.
• Industry Experience (Preferred): Experience in logistics or manufacturing.

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Responsibilities:

• Monitor and analyse the current state of various product runtime environments (production and non-production) to ensure optimum system performance. Develop data-based strategies for continuous improvement and work with application teams, solution architects, security consultants, and other teams to implement these plans.
• Manage application and security incidents. Conduct problem determination and work with internal teams and vendors to resolve issues in a timely manner to meet SLA requirements. Provide reporting and escalate to higher management or incident committee when necessary.
• Develop operations and processes guide to document every aspect of operations and ensure compliance with audit requirements.
• Manage day-to-day operation activities. Analyze statistics, write status and progress reports, and present findings to stakeholders and higher management.
• Manage operations team consisting of staff and vendors to ensure 24/7 support availability.

Experience and Skills Needed:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Proven experience as an Operations Engineer or similar role in an IT setting.
• Experience in implementing change management and incident management workflows using ITSM tools (e.g., Remedy, Zendesk, ServiceDesk) to automate workflows is advantageous.
• Implement security and access control measures to manage privileged access to test and production environments.
• Full stack monitoring experience using Application Performance Management (APM) tools. Familiarity with cloud-native monitoring options (e.g., Cloudwatch, Stackdriver) and the OpenAPM stack is preferred.
• Process automation expertise using scripting tools (e.g., Terraform, Ansible) to minimize downtime and human errors.
• Experience with Agile methodologies, DevOps pipelines, test-driven development, and info-security practices.
• Ability to work collaboratively with a high-performance team and influence with positive energy.
• Resourceful and innovative thinker capable of working out solutions.
• Experience with managing cloud infrastructure and services / certification with GPC, GCC (i.e., AWS, Azure, Google Cloud) or equivalent cloud platforms is preferred.
• Excellent problem-solving and communication skills, with the ability to convey complex technical issues to non-technical teams effectively.

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Project Coordinator/ Project Engineer
• Working Location: Tuas
• Working Hours: Mon – Fri, 8.30 AM – 5.30 PM
• Salary Package: Up to $4,100 + AWS + Bonus (Up to 4 months)
• Duration: Permanent

Key Responsibilities

• Monitor project activities.
• Report to the Section Manager/ Department Manager.
• Maintain and control project site and safety.
• Verify project deliverables with site documents.
• Report site/ safety deviations or issues on projects to the Section Manager.
• Attend/ Conduct toolbox meetings.
• Report and assist the Section Manager/ Engineer in project deliverables.
• Participate in department EHS activities.
• Assist with maintenance activities.
• Prepare Purchase Requisition and update cost summaries as required.
• Maintain project document filing and organize documents.

APPLY NOW!!!

• At least a Diploma and above.
• Minimum 1 year of related working experience or knowledge in the Project Site of the chemical industry.
• Proficient with Microsoft Office.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67897 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Network Engineer
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 9 am – 6 pm)
• Salary Package: Basic Up to $7,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Develop client business by exploring opportunities, guiding client needs, and designing solutions.
• Provide after-sales technical support to major accounts, including service management, channel management, pre-sales testing, project implementation, troubleshooting, and customer service planning.
• Coordinate resources (technical, sales, R&D, service providers) to ensure smooth project progression and address any issues promptly.
• Support client and market success by consolidating industry experience and standardizing knowledge through training and process improvements.
• Analyze the Asia-Pacific telecommunications market to understand demand, competition, and industry trends, and provide feedback to help the company gain a competitive advantage.

APPLY NOW!!!

• Diploma or higher in Computer Science, Information Technology, Engineering, or related field.
• Network-related certifications like CCNA, CCNP, and CCIE are preferred.
• 3-5 years of experience in network solution design or on-site delivery, preferably in the Singapore market.
• Experience in designing and implementing cloud data centers or campus networks.
• Proficiency in network protocols (BGP, OSPF, SSH, VRRP, STP, NetConf, HTTP/HTTPS, DNS, DHCP).
• Familiarity with network automation tools (Ansible, Terraform) and scripting (Python, Shell).
• Ability to troubleshoot complex network environments using tools like Wireshark.
• Deep understanding of network technology and industry trends in the Singapore market.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67599 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Position title : Sales Engineer

• Location: Loyang Industrial Estate
• Working Days: Mon - Fri (830 a.m. to 530p.m.)
• Salary : $3,000 - $4,500 (depends experience)

Requirements

• Possesed Bachelor’s degree in Engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up-to-date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279