a) Minimum Degree in Civil Engineering recognised by PEB

b) Registered Resident Engineer by IES

c) Min. 5 years experience in building work

1. To act as a Site Supervisor appointed by the Qualified Person (QP) in accordance with the Building Control Act.

2. To assist the QP(Supervision) in carrying out supervision works on site

3. To prepare inspection and test plans which are relevant for the supervision of the projects.

4. To conduct quality control of all civil and structural, as well as, mechanical, electrical, and landscaping works.

5. To inspect and advise for compliance on temporary works, including instrumentation reports by Contractor.

6. To support in public relations works.

7. To supervise and keep independent records of day works including overall and part works programme.

8. To issue site memo to Contractor for recording of observed safety and quality non-compliance with Contract or Authorities, Services Agencies requirements.

9. To attend project meetings and draft meeting minutes.

10. To carry out site supervision and inspection of works including any off-site manufacturing/testing as instructed by the QP(Supervision) and/or S.O. so as to ensure that works are constructed to the required quality, accuracy and standards.

11. To monitor progress of the works on site including material supply to the site and at any off-site manufacturing/testing facilities and report delays immediately.

12. To provide standing supervision in compliance with the relevant Building Control Regulations.

13. To maintain proper and updated daily records of all works done, including independent record of test, inspections, status of work, safety, site diary, material and equipment on site, labour, dayworks, provisional quantities etc.

14. To check that the Contractor executes preliminary items.

15. To check service routes and Contractor’s setting out and report any deviations to the QP(Supervision)/S.O.

16. To verify reports and claims submitted by Contractors.

17. To record all variations as instructed or approved by the S.O.

18. To undertake any other duties related to the project as and when instructed by the S.O./Client/QP(Supervision).

19. To check drawings including as-built and documents and report discrepancies.

20. Report on site safety, security and housekeeping.

21. Verification of the Client’s Permit To Works (CPTW) checklist completed by the Contractor including:

i. Review the CPTW and keep records of relevant documents such as Authorities/Agencies

approvals, services detection plan and etc. on site.

ii. Make yourself aware of the contractor daily site works and remind them to provide the CPTW

for your verification prior to commencing works on site.

iii. Inform the Contractor in-writing of any non-compliance identified by the CPTW and ensure that

the Contractor rectify the non-compliance prior to permitting works to commence.

iv. Inform the S.O./ QP(Supervision) immediately if the Contractor proceeded works on site without a valid CPTW.

22. Any others duties specified under Building Control Acts and relevant scope

23. Any other work incidental to the above and/or reasonably to be inferred from the nature of work to be carried out by the Service Provider Field staff; and,

24. Such other work as may be agreed from time to time.

25. In addition to the principal duties detailed above, the Field Staff is expected to be vigilant and monitor the Contractor performance in progress, site safety, services protection, security and hygiene.

Key responsibilities

• Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.
• Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privileged accounts and passwords.

Requirements

• 5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.
• Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the team

Our team works to build out the backend services, testing infrastructure, and best practices that enable TikTok engineers to deliver high-quality features and systems to our users. We aim to provide systems enabling testing and operation to be more productive and secure. The systems we are building include testing frameworks, standards and related tools and platform. We are looking for engineers who have good backend design and/or infra experience to join our team.

Responsibilities:

- Build testing infrastructure which is related to API, UI and Web automation which supports all TikTok products

- Design, build and support automated testing, continuous deployment and telemetry systems that help our teammates work more effectively.

- Help make decisions around infrastructure technology choices that impact developer workflow, security, scalability, reliability, and performance.

- Contribute to the curation and prioritization of the team roadmap.

- Embrace cross-team collaboration, debate, and execution, working closely with teammates in business orgs to solve problems and make sure our infrastructure evolves with our products.

Qualifications

- Bachelor degree in computer science or a related technical discipline with 5+ years' industry experience;

- Experience working with Java/C++/Python/Golang;

- Experience in one or more of the following: private or public cloud, backend architecture, CI/CD system, testing infrastructure

Preferred:

- Automation testing infrastructure experience

- Experience with technical leadership and dealing with ambiguity

- Strong strategic thinking and team collaboration skills

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

At TikTok, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for more than 1 billion users on our platform. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at TikTok.

We are the messaging team on TikTok. Our team's mission is to facilitate meaningful user connections through TikTok's messaging experience, which is still in its infancy. We achieve our mission by building and shipping tools that help our users more easily connect and share the things they care about.

Responsibilities:

1. Develop large-scale software systems that powers TikTok app.

2. Improve system design and architecture to ensure high stability, performance and reliability of the product.

3. Collaborate with multiple cross-functional teams to deliver high quality work in rapid product development.

Qualifications

1. BS/MS Degree in Computer Science or related major.

2. Experienced in building backend services for large-scale consumer-facing applications.

3. Proficient in at least one of the following languages: Go, Python, Java, C++.

4. Deep understanding of computer architectures, data structures and algorithms.

5. Have good team communication and collaboration skills.

Preferred Qualification

Minimum 3 years relevant work experience from a large-scale internet business

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Site preparation and co-ordination, preparation of submission documents.
• Coordinate, liaise and manage various project stakeholders including customers, consultants, sub- contractors, vendors, etc. on site to ensure project requirements are met.
• Prepare and create detail work schedule, manpower and resource planning.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Coordinate the safety management system on site.
• Follow up and reporting on the project progress.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

EA License No: 20C0270

EA Personnel No: R22110981

EA Personnel Name: Law Mei Fong

Responsibilities:

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:
•Requirements gathering.
•Design and develop software applications for embedded devices.
•Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
•Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
•Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual,
Training Manual and others documents as required in the SDLC processes.

•Assist day-to-day application support issues.
•Liaise with users on the requirement testing and production issues.

Qualifications & Requirements:

•Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
•Developed software in at least one full Software Development Lifecycle.
•Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
•Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
•Experience in multi-threading, socket programming and serial/USB communication.
•At least 5 years’ experience in object-oriented software development.
•Familiarity with docker container development and AWS Greengrass is a plus.
•Prior experience in following areas Scrum AGILE methodology process is a plus.
•Scrum AGILE methodology process.
•Develop and integrate embedded devices with cloud platforms.
•Strong analytical and problem-solving skills.
•Good written and verbal communication skills.
•Self-motivated, independent and a good team player.

Produce concepts and perform design, analysis, modelling, and testing of various types of antenna.

 Take designs from the conceptual drawing board into the implementation of building and testing the finished product.

 Work with RF engineering to understand basic microwave component theory and practical realization

 Design, and evaluate test antennas correlating expected performance with test results, presenting results.

 Ability to design experiments, analyze the data and conduct structured problem solving.

 Prepare and present presentation for preliminary design review, performance of simulated model and tolerances

 Evaluate data related to test results and work with the team to implement changes to meet requirements

 Provide support once design is in production

 Create and provide reports to engineering on the evaluations

 Actively pursues opportunities to expand job-related knowledge

 Able to juggle multiple tasks and make quality decisions without negative impact on others

 Executes on program plans and priorities, identifies obstacles and issues and communicates to achieve resolution for

assigned tasks

 Work independently or within a team environment to meet project schedules

 Participates and works well with a cross-functional team to achieve desired results

 Must have the ability to effectively convey pertinent information verbally and in writing to others in a constructive manner

 Resolves routine issues and escalates other issues to the appropriate individual in a timely manner

 Manage individual projects (both R&D and customer projects) from pre-sales activities

through design, production, testing and delivery/acceptance.

 Performs any related duties as required or assigned to ensure efficiency of the Company.

Job Summary:

Based in our Singapore office, you will join our IC Lab team as a Verification Engineer. In this role, you will develop and implement advanced verification methodologies, including UVM, SystemVerilog, and SVA, for cutting-edge projects. You will also work with platforms like Palladium Z1, HAPS, and Zebu to deliver high-quality verification solutions.

What you will be responsible for:

• Apply UVM (Universal Verification Methodology), SystemVerilog, Verilog, and SVA (SystemVerilog Assertions) languages in verification tasks
• Develop and implement state-of-the-art verification methodologies, including UVM, C/C++, co-simulation, system emulation, and mixed-mode simulation/emulation
• Contribute to projects requiring advanced verification tools such as Palladium Z1, HAPS, and Zebu platforms
• Collaborate effectively within a team, ensuring high-quality deliverables

How you will stand out:

• Possesses a Masters or Bachelors degree in Electrical Engineering or Computer Engineering
• At least 3 years of relevant experience
• Proficient in UVM, SystemVerilog, Verilog, and SVA languages
• Strong knowledge in protocols such as SPI, UART, and I2C
• Possesses knowledge of firmware development and in depth understanding of firmware development processes
• Excellent team player with strong communication skills.
• Highly driven and detail-oriented.
• Has experience working with advanced verification platforms like Palladium Z1, HAPS, or Zebu.

What you will experience working with us:

• A culture that values authenticity and diversity of thoughts and backgrounds;
• An inclusive and respectable environment with open workspaces and exciting start-up spirit;
• Fast-growing company with the chance to network with industrial pioneers and enthusiasts;
• Ability to contribute directly and make an impact on the future of the digital asset industry;
• Involvement in new projects, developing processes/systems;
• Personal accountability, autonomy, fast growth, and learning opportunities;
• Attractive welfare benefits and developmental opportunities such as training and mentoring.

--------------------------------------------------------------------

Bitdeer is committed to providing equal employment opportunities in accordance with country, state, and local laws. Bitdeer does not discriminate against employees or applicants based on conditions such as race, colour, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union.

Responsibilities

• Assist, plan and execute Mechanical / Electrical / Fire / Plumbing & Sanitary (MEPL) project in compliance with safety, quality, and schedule
• Review, understand and execute E&I engineering documents.
• Technical evaluation of E&I items for the project in accordance with Project/client’s specifications / requirements
• Prepare controls, SLD, liaise with PLC / BMS vendors
• Develop construction, installation, testing and commissioning procedure.
• Provide and mark up on As-Built drawing and feedback to engineering team.
• Provide assistance to electrical and installation works.
• Perform overall quality control of the work (budget, schedule, plans, team performance, supervision, and inspection)
• Prepare, schedule, coordinate and monitor the assigned projects compliance to applicable codes, practices, QA/QC policies, performance standard and specifications
• Assist to propose value engineering methods with the clients to interpret their requirements and represent them in the field
• Ensure site organization, workforce management and arrangementProvide technical submission of proposal / drawings / MOS / RA etc
• Attend site meetings and necessary site walk
• Cooperate and communicate effectively with internal and external stake holder.
• Review engineering deliverable and initiate appropriate corrective actions
• Any other duties as assigned and comply to ISO / OSHA standards

Requirements

• 3-5 Year(s) of working experience in managing Additional and Alteration services in Commercial / Industrial / Plants sectors for Mechanical, electrical, Plumbing and Sanitary system, Fire system (MEPL)
• Candidate must possess at least Bachelor's Degree/ Diploma in Engineering or equivalent.
• Well verse in MEPL system knowledge. Proficient in Drafting is additional values
• Proficient in MS Excels/words/PowerPoint/Project
• Preferred skill sets: good leadership skill, self-Driven, resourceful, problem-solving nature, strong business acumen, project management and good conversational/writing skills in English

• Analyse network traffic patterns across identified routes.
• Collect specific measurements across identified routes for analysis.
• Conduct a network infrastructure analysis.
• Conduct threat assessment matrix on network.
• Configure Authentication, Authorisation and Accounting (AAA) services to support remote access protocols based on security requirements.
• Configure a network addressing system.
• Configure hosts and workstations to use IP addresses either manually or through automatic allocation of addresses.
• Configure network devices to provide secure failover and redundancy.
• Debug networking issues to maintain wireless connection.
• Escalate network performance issues to relevant personnel.
• Evaluate user requirements and recommend network protocol services.
• Identify the network components that are required to be installed.
• Install and configure access point to provide wireless access to network.
• Install and configure the components.
• Install firewall appliance for attack guards and intrusion detection.
• Monitor wireless network performance using diagnostic tools.
• Operate network monitoring tools to monitor network performance against thresholds and Quality of Service (QoS).
• Plan control methods for the network for user access management.
• Review network traffic problems with relevant parties for resolution.
• Test the overall network to verify that it meets the agreed requirements.

Job Requirements:

• Diploma or University Degree holder
• Cisco Certificate
• Knowledge in routing, switching, SD-WAN, and vendor technologies (Cisco, Fortinet, etc.)
• Knowledge of Server Architecture such as SANs, Citrix, AD;
• Knowledge in Microsoft server applications, Microsoft Azure Platform as a Service and Microsoft Azure Infrastructure as a Service
• Any relevant professional qualifications are considered an advantage

Job Description & Requirements

Role: Desktop Engineer - End User Computing (EUC)

Work Location: Woodlands & Yishun

Job Description:

Shall provide daily on-site DESKTOP management and support services (“DESKTOP Support Services”) for end-users’ End UserComputing Devices (DESKTOP) which are used in the Customer’s environment with the Customer’s approval. The general scope of Desktop Support Services shall minimally include:

(a) Image build management;

(b) Administration and configuration;

(c) End-user account management;

(d) End-user device hardening and lockdown;

(e) Trouble-shooting and problem resolution; and

(f) End-user briefings & awareness service.

Shall minimally support the following types of DESKTOP:

(a) Desktops;

(b) Notebooks;

(c) Mobile Devices (e.g. iPad, iPhone or equivalent);

(d) Video Conferencing Devices;

(e) IP Telephones;

(f) Printers, including multi-function devices (i.e. printers, scanners and fax devices); and

(g) Other peripherals (e.g. external hard drives, mouse, smart-card readers, monitors, docking stations).

Shall minimally support the following operating systems:

· Windows 7 and later versions of Windows;

· Apple iOS 9.x or later versions; and

· Android OS 5.x or later versions.

Minimum Requirement:

The Level 1 Desktop Support Engineer meet the following requirements:

(a) Minimum one (1) year of DESKTOP Support, ICT End User Computing or Service Desk Agent experience;

(b) Ability to perform the daily DESKTOP Support operations with minimum supervision;

(c) Possess technical skills in supporting existing and new computing devices such as desktops, notebooks and mobile devices;

(d) Possess knowledge in IT networking and LAN to troubleshoot computer problems; and

(e) Possess at least one (1) of the following certifications:

· Microsoft Certified Solution Associate (MCSA) Win7/Win8 or equivalent;

· (ii) Microsoft Certified Technology Specialist (MCTS) in any discipline or equivalent; or

· (iii) CompTIA A+ 220-801/ 220-802, CompTIA PDI+ or equivalent.

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Title: Senior Simulation Engineer - Electrochemical Modeling

Location: NTU-Durapower Advanced Lithium Battery Joint Lab, #02-01, 1 Cleantech Loop, Singapore 637141

Overview:

We are seeking a passionate and experienced Senior Simulation Engineer specializing in electrochemical modeling to join our innovative Battery Material Research Division. This role is crucial in advancing simulation technologies to evaluate and optimize battery performance, safety, and longevity. It emphasizes a hands-on approach to laboratory experiments and leveraging simulation tools to develop cutting-edge lithium-ion and solid-state battery technologies.

Job Scope: Senior Simulation Engineer - Electrochemical Modeling

Key Responsibilities:

• Conduct research into battery working principles and failure mechanisms, developing multiscale and multiphysics-based battery models for rapid performance evaluation and diagnosis.
• Establish and refine electrochemical models, perform parameter determination, and execute numerical calculations and result analyses.
• Explore and implement simulation technologies to assess battery electrical performance, thermal runaway safety, and life prediction, providing actionable insights for the team.
• Utilize simulation outcomes to optimize existing product designs and propose innovative product design strategies.
• Design and execute experiments to generate data for training, validating, and testing battery models.

Key Requirements:

• Bachelor’s, Master’s, or PhD in Mathematics, Physics, Chemistry, Materials Science, or relevant Engineering disciplines.
• Strong foundation in lithium-ion cell electrochemistry and mechanisms.
• Hands-on expertise with battery testing equipment, protocols, and physical-chemical evaluation techniques.
• Proficiency in electrochemical simulation and algorithm development software, such as COMSOL, MATLAB/Simulink, or equivalent tools.
• Practical experience in experimental battery research, including DOE design and analysis. Capability in electrochemical testing and analysis of battery materials.
• Strong analytical and problem-solving abilities.
• Collaborative and detail-oriented mindset, with effective communication skills for cross-functional teamwork.
  

• Engineering Construction Company
• Competitive Benefits
• Candidates who have completed semiconductor projects will be preferred.

Our client is a Engineering and construction company that specializes designing and delivering mega and significant projects. They are looking for an experienced Senior Mechanical Engineer for their expanding business.

RESPONSIBILITIES

• Expertise in M&E systems, testing, commissioning, and familiarity with construction processes, project management, BIM, and Green Mark 2021 requirements.
• Manage engineering teams, coordinate with stakeholders, and oversee M&E aspects of construction projects.
• Strong analytical, problem-solving, and decision-making abilities for technical issue resolution and goal achievement.
• Knowledge of quality control, industry standards, and safety regulations to ensure compliance and maintain a safe work environment.
• Financial skills to assist in budgeting, reporting, and implementing cost-control measures

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Description

• Industry/ Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: R&D Engineer
• Working Location: Bedok
• Working Hours: Monday – Friday, 8.15 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,000 + Transport Allowance + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Researching electronic components and designing new products to meet market needs.
• Supporting the complete R&D project life cycle and participating in all phases from concept to manufacturing through designing, prototyping, validation, and production of R&D products, taking into account the functionality, feasibility, quality, manufacturability, costs, and completion time.
• Giving concise and informative demos/presentations to other team members or product managers about design concepts.
• Finalizing a design and its deliverables to facilitate a smooth transition to the relevant stakeholders.
• Preparing product documentation like the bill of material, material specification, and process documentation.
• Evaluating processes and design improvements.
• Coordinating with the Global R&D team.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Engineering or Technology (Electrical/Electronics) or equivalent
• Has a minimum of 2 years of experience with passive electronic components design
• Has understanding and work knowledge of AutoCAD Electrical
• A good understanding of product safety, environmental testing, and electromagnetic compatibility (EMC) will be advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69868 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• To participate in the development of a large-scale web application using Microsoft .NET Framework and SQL Server.
• Understands functional requirements from stakeholders and business analysts, and perform impact analysis.
• Develop, unit testing and system integration testing of the application components.
• To support code merging, code compilation and deployment to Development, UAT and Production environments.
• Provide and update software documentation.
• Provide operational support for existing systems by investigating reported issues and resolving them.

Requirements:

• Degree in Computer Science or relevant.
• Minimum 2 years working experience in software development using .NET 4.5, C#, ASP.NET, T-SQL using SQL Server 2012 and onwards.
• Have experience in end-to-end software development life cycle.
• Knowledge in web front-end technologies such as CSS, JavaScript, JQuery, etc.
• Knowledge in code version control process and continuous integration process are required.
• Strong analytic skills and problem-solving skills are required.
• Good interpersonal skills and ability to work in a team-oriented, collaborative environment.
• Good written and verbal communication skills in English.
• Knowledge in Java and Oracle is preferred, but not required.
• Candidates with longer and relevant working experience may be given senior roles.
• Candidates with experience in technical architecting and design may be given lead roles.

NOTE:

By submitting your Curriculum Vitae (CV)/Resume, you agree to your data being used in conjunction with recruitment and employment purposes.

In order to maximize your opportunities to work with us, you are encouraged to keep the information provided accurate, complete and up-to-date.

Our Data Protection Notice for Job Applicants is attached here:
https://www.secur.sg/dataprivacy/data-protection-notice

We DON'T collect any of the following:
1) NRIC/FIN
2) Photo
3) Date of Birth
4) Age
5) Spouse/Family information

Possess extensive knowledge of power plant systems and operations, along with strong leadership skills to lead a small team of engineers and technicians. This role is crucial for ensuring that all plant engineering tasks are executed correctly. The successful candidate will oversee plant engineering designs to guarantee that the plant operates efficiently and safely.

Key Responsibilities:

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams
• Work with 3D design team for 2D deliverables
• Lead, mentor, and manage a small team of engineers and technical staff
• Collaborate with different parties for plant engineering coordination and support site inspection
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization

Desired Characteristics:

• Knowledge of onshore power plant design engineering, prefer to have work exp in Singapore.
• Experience in coordination, leading and managing plant engineering teams.
• Familiar with complicated cable tray route, cable tray support engineering design, equipment layout, installation materials, cable glands selection, cable drum schedule, cable route schedule, cable termination material, and so on.
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks, Autocad
• Min 6 years experience in Electrical composite plant project

Duration: 6 months (may be extendable)
Work Location: Ayer Rajah
Working hours: 8hours a day, 5 days a week

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Equipment – CQV Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Experience in conducting equipment/facility FAT/SAT, IQ/OQ/PQ protocols, and serving as both author and executor of QSR (KAYE validator).

· Proficient in writing PQ, cleaning, development/study protocols, SOPs, and work instructions.

· Responsible for raising Change Control requests, identifying tasks, and performing impact assessments, with a focus on processes and process equipment.

· Experienced in writing deviations related to processes, cleaning, and process equipment (PQ).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

The role is responsible for Equipment Package Ownership (full lifecycle – Engineering Design, Build, Testing (FAT), Installation and Commissioning), including experience in commissioning and qualification of process equipment.

Responsibilities:

● Experience in upstream / downstream / Central services process operation, (experience in equipment design for process equipment will be an advantage).

● Project scheduling and able to come up solutions to keep the schedule on track when there are hiccups.

● Responsible for basic and detailed design, commissioning and qualification activities, including URS development, FAT, SAT, DQ, IQ, OQ and PQ.

● Review industry practices for best-in-class approach.

● Ensure that the appropriate Quality standards are applied consistent with best practice and internal Quality Standards and expectations.

● Deliver the project from conceptual through implementation phase, encompassing support for a wide range of engineering and construction requirements.

● Coordinates with different functions like manufacturing, safety, MSAT, validation and quality for implementation of changes associated with the project.

● Work independently and/or with the project manager to complete the engineering projects within schedule, budget and quality constraints.

● Agile response to equipment issue, troubleshoot and come up with solutions swiftly.

● Any other task as assigned by Supervisor/Manager.

About You:

● Diploma/Degree in Chemical Engineering, Chemistry or equivalent with at least 5 yearss experience in a process engineering role or similar role with a biologics manufacturing plan.

● At least 5 years of relevant working experience in the Pharmaceutical / Biologics manufacturing industry with experience in Process Engineer.

● In Biologics industry with understanding of cGMP requirement.

● Should have Design experience at various stages of project (Base, Detailed design).

● Able to support Installation, Commissioning & Qualification activity at site.

● Must be able to drive project.

● Any other task given related to Process.

Contract length: 12 Months. Option to extend depending on performance and business needs.

• Responsible for the Energy meter market and sales of HVAC BTU meter to the industrial and commercial building as part of Building Management & Monitoring System.
• Selling and marketing of our wide range of Electromagnetic Flow meter, Ultrasonic clamp-on flow meter, Turbine Flow meter , Thermal Mass flow for air/gas application , Coriolis Mass flow, PD meter, Variable Area flow meter, Vortex Flow meter, Loadcell based or Radioactive base Conveyor Belt mass flow meter ,Venturi and Orifice flow meter and flow switches
• Selling and marketing of a wide range of complementary flow computer, flow controller , batch controller, flow display monitor, process and digital panel meters.
• Selling and marketing of a wide range of Magnetic level gauge, displacer , Magnetostrictive and float operated level transmitter, Non Contact Radar, Guided-Wave Radar and ultrasonic Level transmitter, capacitance & RF /Admittance level Transmitter , DP ( include Bubbling DP ) & Immersion pressure type level transmitter, Radioactive based Level measurement , Level switch and Sensor to detect overflow/ overfill of liquid and bulk solid storage tank.
• Selling and marketing a wide range of Pressure and temperature sensor c/w thermowell for use with flow computer, ACMV / HVAC BTU meter.
• Selling and marketing of a wide range of chart and paperless recorder, digital display & controller, Modbus display and monitor, signal generator and signal conditioner , Lightning Protection Unit ( LPU ) , Signal Surge Arrestor, Intrinsically safe barrier and isolating amplifier.
• Selling and marketing a wide range of analytical instruments such as Oil on water alarm for pollution monitoring, air leak alarm , PH/ REDOX / TSS , Microwave based moisture and total % weight / concentration meter and density meter etc…

As our Brands and type of Products we carry is very wide , you will be assigned for the products that suits your strength and experience

Job Requirements

• Engineering Degree, Technical Diploma in ICA ( Instrumentation Control & Automation ), Mechatronics /Electrical and Electronics, candidates strong in Physics & Chemistry, ITE graduate with proven track record are welcome.
• Strong in oral and written presentation skills coupled with customer centric service mindset is likely to excel
• Require a basic understanding of IOT / SCADA / Building Management Monitoring & Control System will be very helpful
• Candidate who is inclined towards hands on and practical is likely to excel

This is a Field Sales position, candidates with prior field sales or service experience will be helpful although training will be provided

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Software Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design solutions that meet functional requirements.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Participate in impact analysis of encountered issues.
• Contribute to continuous improvement of software development best practices in the areas of coding tools, languages and APIs, as well as software design and development processes.

Participate in UX activities such as:

• Conduct user research/interviews
• Develop user stories, storyboards to articulate current and future concepts
• Create wireframes, detailed visual mock ups and interactive prototypes
• Create style guides and digital assets for production

Requirements:

• At least 3 - 4 years’ Software Engineer experience, with strong expertise Java / C++ languages
• Good understanding of software development lifecycle processes
• Proficiency in Web Technologies such as HTML, CSS
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm