Responsibilities:

• Conduct investigation into causes of bus accidents / incidents arising from bus defects
• Assist in planning & managing campaigns for retrofitting on buses for improved performance, safety and standardization
• Assist to implement maintenance policies for vehicle improvement to meet our operational requirements in accordance to manufacturers’ recommendations
• Conduct engineering audits, smoke checks and field visits
• Any ad-hoc jobs as per assigned

Requirements:

• Diploma in Engineering
• At least 5 years' relevant experience in automotive industry
• Hands-on experience on bus repair
• Proficient in software applications such as Microsoft Office and SAP

We regret to inform that only shortlisted candidate will be notified.

Submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for two years for consideration of future job opportunities (where applicable) form the date of submission of application.

Duties & Responsibilities:

• Able to generate sales lead from lighting consultants, Architect & MEP consultants.
• To follow up project tenders with contractors and provide accurate quotation
• Knowledgeable in Autocad schematic drawings & Electrical will be an advantage
• Good communication skills, positive mindset towards customers and fellow colleagues
• Self-initiative, Independent, hard-working and team leadership skills
• Knowledge in LED lighting, lighting control system function will be advantage

Responsibilities

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation
• Providing timely engineering insights including failure analysis technical reports and presentation
• Analyze product warranty claim and provide modeling on product service life
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization
• Handles customer visits and factory audits and product inspection

Requirements

• Min Bachelor / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)
• Application experience in managing (large) data modelling would be favorable
• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors
• Communicate effectively through presentation and technical reports

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description

• Inspecting incoming and outgoing materials along with finished goods.
• Compiling FA (First Article) and outgoing reports.
• Ensuring compliance with drawing specifications for all parts.
• Documenting and addressing non-conformance issues.
• Managing the calibration of measuring equipment, jigs, and fixtures.

Requirements

• Possession of a Certificate in Mechanical Engineering or its equivalent.
• Familiarity with various measuring instruments.
• Fresh graduates or individuals without similar experience are encouraged to apply; training will be provided.

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

· Assist System Engineer on site work

· Prepare product catalogue/specification, schematic drawing submission or physical samples for customer/consultant approval

· Participate site meeting, maintain good written records and update to superior/management progressively

· Outstanding skills to troubleshoot, rectify and resolve all kinds of issues on site

· Perform scheduled system maintenance works on site and require to work after office hours or during weekends

Responsibilities

• Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
• Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
• Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)

Requirements

• Min Diploma in Engineering or relevant
• Min 3 years of working experience in Manufacturing Industry in Quality

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation
• Providing timely engineering insights including failure analysis technical reports and presentation
• Analyze product warranty claim and provide modeling on product service life
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization
• Handles customer visits and factory audits and product inspection

Requirements

• Min Bachelor / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)
• Application experience in managing (large) data modelling would be favorable
• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors
• Communicate effectively through presentation and technical reports

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Lead the internal team members in achieving the ISO9001:2015 accredited certification as well as customer-specific qualifications.
• Work closely with internal team members and external suppliers to address product-related quality issues, and drive corrective and preventive actions for continuous improvement.
• Perform other duties as requested by management

Requirements

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc)
• Working knowledge in 5S, PFMECA, SPC & ISO 9000 series Quality system
• Able to communicate effectively across all levels
• Strong knowledge and ability to read mechanical drawings with knowledge of CMM, profile projector, and measuring equipments
• Min. 5 year's relevant working experience in the Manufacturing/EMS/Semiconductor industry or experience in quality environment

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026