· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

Essential Responsibilities:

• Ownership includes both quality assurance and quality control. Includes quality assurance of products, services, manufacturing processes. Includes conformance in manufacturing, incoming goods control, product inspection, witness points, etc.
• Typically a 1st line manager of professionals or a 2nd line manager of a professional department. Developing specialized knowledge in their discipline. Serves as best practice/quality resource. Has awareness of latest technical developments in own area. Contributes towards strategy and policy development, and ensure delivery within area of responsibility.
• Has in-depth knowledge of best practices and how own area integrates with others; has working knowledge of competition and the factors that differentiate them in the market
• Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations. Uses multiple internal and limited external sources outside of own function to arrive at decisions.
• Acts as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Developing persuasion skills required to influence others on topics within field.

Qualifications/ Requirements:

• Experience leading a team with 10-12 year of experience in Manufacturing & Production Quality.

Desired Characteristics:

• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Responsibilities

• Production of access cards – OLAE requests.
• Act as programmer for access control operations
• Emboss / print / affix applicant image on access cards.
• Pack cards for distribution.
• Record daily inventory of return of access cards.
• Manage and respond timely on helpdesk requests and emails.
• Perform any access control related tasks assigned by managers or team lead.
• Liaison with business units and building landlords on access card matters.
• Requisition of access control consumable and office supplies.
• Overseeing maintenance for card printer.
• CoB and Emergency – participate in CoB / Call Tree exercise and testing.
• Other responsibilities as assigned by the CSIS.

Qualifications

• Tertiary education in any discipline.
• At least 5 years of relevant experience in managing security access control systems, general office administration, record management and customer service.
• Knowledge in security systems would be an advantage.
• Possess high level of integrity.
• Strong Command of English.
• Good written, verbal, analytical, interpersonal and presentation skills
• Proficient in Microsoft Office application, i.e. Word, Excel, PowerPoint, etc.

Please indicate in your profile your expected salary as you apply. Thank you.

Whether you’re at the start of your career or looking to discover your next adventure, your story begins here. At Citi, you’ll have the opportunity to expand your skills and make a difference at one of the world’s most global banks. We’re fully committed to supporting your growth and development from the start with extensive on-the-job training and exposure to senior leaders, as well as more traditional learning. You’ll also have the chance to give back and make a positive impact where we live and work through volunteerism.

Shape your Career with Citi

Citi’s Global Legal Affairs and Compliance (GLAC) empowers and protects Citi by providing legal, compliance, investigative, and security services to our firm. We manage compliance risk, provide legal analysis and advice, protect Citi’s people and businesses, advocate for legal and regulatory outcomes that benefit our firm and our clients, and ultimately promote behavior that is consistent with Citi’s mission and culture.

We’re currently looking for a high caliber professional to join our team as Vice President, Business Risk & Control Officer- Global Assessment Unit coordination - Hybrid (Internal Job Title: Business Risk & Control Officer - C13) based in, Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future. For instance:

• We believe all parents deserve time to adjust to parenthood and bond with the newest members of their families. That’s why in early 2020 we began rolling out our expanded Paid Parental Leave Policy to include Citi employees around the world.
• We empower our employees to manage their financial well-being and help them plan for the future.
• We have a variety of programs that help employees balance their work and life, including generous paid time off packages.

The Business Risk and Control Officer is a strategic professional who stays abreast of developments within own field and contributes to directional strategy by considering their application in own job and the business. Recognized technical authority for an area within the business. Requires basic commercial awareness. There are typically multiple people within the business that provide the same level of subject matter expertise. Developed communication and diplomacy skills are required in order to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Significant impact on the area through complex deliverables. Provides advice and counsel related to the technology or operations of the business. Work impacts an entire area, which eventually affects the overall performance and effectiveness of the sub-function/job family.

The Business Risk and Control Officer will be a key member of the Legal Risk & Control Team supporting both the Legal Department and the Regulatory Strategy and Policy (RSP) team with focus on the Global Assessment Unit coordination role as well as supporting the implementation and execution of new BAU transformation processes to ensure appropriate adherence to firm-wide initiatives and requirements, including operational and compliance risk management programs.

In this role, you’re expected to:

• Help contribute to governance and the facilitation of the execution of the Manager Control Assessment (MCA, i.e.. Risk & Control Self-Assessment) as required by the MCA Standard including the assessment and appropriate approval of risk associated with business changes.
• Support teams in the quality, completeness, and accuracy of the implementation of the Control Framework, including Risk Control Policy, Control Standard, Issue Management Policy, Lesson Learned Policy and Control Inventory.
• Help contribute to the Lessons Learned Policy, including monitoring of control breaches and dissemination and learnings across other business units for process improvement to limit the occurrence of similar future events and where similar risk exposure might exist.
• Support the review and challenge process, within Legal and RSP, on the effective design and management of controls to mitigate risks as required by the Control Standards, including implementation and operation, conducting the control monitoring, handling deficiencies, and escalating issues for resolution.
• Help contribute to the timeliness, accuracy and completeness of the MCA through controls prior to the execution of a process (QC).
• Assist in the monitoring of the adherence to the MCA Standard through controls after the execution of a process (QA).
• Support in dealing with Operational and Compliance Risk in accordance with established Policy requirements.
• Assist in performing a detailed analysis to identify, assess, escalate, and manage risk exposures across Risk Categories (Operational Compliance, Strategic, Reputational, etc), including material, emerging and concentration risks in accordance with enterprise Policies and the establishment of Key Indicators to monitor risk exposures.
• Assist in supporting Risk Appetite and monitor / assess exposures against this in accordance with enterprise requirements (if applicable).
• Be part of the process to identify, assess, record and response to Operational and Compliance Risk events, ensuring these are captured accurately, timely and in accordance with requirements.
• Help ensure that adequate governance and training are in place to support management of Risk profiles.
• Support with risk and control assessments or coordination for programs within various risk stripes and ensure sufficient subject matter expertise exists to enable management of these risks within the Business (e.g. third party, fraud, sanctions etc.) (if applicable).
• Identify gaps in implementing policy documents and draft appropriate procedures to meet requirements of the Citi Policy governance operating model.
• Appropriately assess risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behavior, conduct and business practices, and escalating, managing and reporting control issues with transparency.

As a successful candidate, you’d ideally have the following skills and exposure:

• 6-10 years relevant work experience in Business Risk & Controls
• MS Excel, MS Access, SAS, SQL, Visual Basic a plus. 5+ years’ experience in financial services.
• Proficient with the Manager’s Control Assessment module.
• Consistently demonstrates clear and concise written and verbal communication skills.
• Effective organizational influencing skills required.
• Experience with work-flow systems, excellent project management, and organizational skills.
• Demonstrated ability to lead global team efforts.
• Excellent problem-solving skills and self-motivated.
• Ability to see the big pictures with high attention to critical details.
• Demonstrated ability to develop and implement strategy and process improvement initiatives.
• Bachelor’s/University degree or equivalent experience, potentially Master’s degree.

Working at Citi is far more than just a job. A career with us means joining a family of more than 230,000 dedicated people from around the globe. At Citi, you’ll have the opportunity to grow your career, give back to your community and make a real impact.

Take the next step in your career, apply for this role at Citi today

https://jobs.citi.com/dei

This job description provides a high-level review of the types of work performed. Other job-related duties may be assigned as required.

Job Description & Requirements

Full Job Description

- Provide technical support to customers, including testing, commissioning, programming and troubleshooting for the company’s product range.

- Attend to fault calls and respond within stated time stated in agreement.

- Provide positive service experiences for our customers.

Skills/Requirement

- Open to Singaporean / PR / Malaysian

- Candidate must possess at least NITEC/ Higher NITEC or Diploma in Electrical Engineering

- Entry level is welcome to apply as training will be provided

- Able to work independently

- Occasional a travel may be required

Job Types: Full-time

Salary: Minimum S$3,600/- Negotiable

If you have the relevant skills sets or interest to take on a multi-disciplinary role, we welcome your application.

Please email your resume : [email protected]

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

What we offer

Fugro provides a positive work environment as well as projects that will satisfy the most curious minds. We also offer great opportunities to stretch and develop yourself. By giving you the freedom to grow faster, we think you’ll be able to do what you do best, better. Which should help us to find fresh ways to get to know the earth better. We encourage you to be yourself at Fugro. So bring your energy and enthusiasm, your keen eye and can-do attitude. But bring your questions and opinions too. Because to be the world’s leading Geo-data specialist, we need the strength in depth that comes from a diverse, driven team.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.

Summary

The Laboratory Quality Controller carries out a range of high complex and varied laboratory tests by

• generating and processing test data
• drafting concept-reports within time, budget and quality requirements
• proposing improvements of research methods and quality systems
• contributing to acquisition activities
• taking on tasks that have been escalated by more junior team members
• Guides and supports more junior team members but people management is not a main task of this position.
• Works with limited supervision.
• Requires secondary vocational education (MBO) plus additional technical education (or equivalent professional and intellectual capacities) and full proficiency in a range of technical processes and procedures.

Responsibilities

• Ensure all laboratory tests are carried out in accordance with standard procedures and techniques
• Provide regular inspection on laboratory testing procedures and techniques
• Obtain and provide regular updates on test standards (ASTM, ISO etc)
• Perform evaluation and QC of laboratory test results
• Inform / alert the Laboratory Manager of any discrepancy in results
• Enforce any corrective measures required if discrepancies of results recur
• Ensure the process conforms to customer, statutory and management system requirements
• Conduct any induction courses on new standards, and/or revised versions
• Conduct a quarterly awareness session on standards even if there is no revision
• Create software application templates for data processing
• Train and assess laboratory staff in soil laboratory testing

Requirements

• Degree in Civil Engineering or equivalent
• Relevant experience in soil testing industry, preferably with minimum 3 – 5 years in laboratory QC role
• Strong analytical ability, organisational and time management skills
• Self driven, possess excellent team spirit and good interpersonal skills
• Proficient in MS office applications

How to apply

• Please include your latest resume in the application.
• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).
• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

Responsibilities

• Production of access cards – OLAE requests.
• Act as programmer for access control operations
• Emboss / print / affix applicant image on access cards.
• Pack cards for distribution.
• Record daily inventory of return of access cards.
• Manage and respond timely on helpdesk requests and emails.
• Perform any access control related tasks assigned by managers or team lead.
• Liaison with business units and building landlords on access card matters.
• Requisition of access control consumable and office supplies.
• Overseeing maintenance for card printer.
• CoB and Emergency – participate in CoB / Call Tree exercise and testing.
• Other responsibilities as assigned by the CSIS.

Qualifications

• Tertiary education in any discipline.
• At least 5 years of relevant experience in managing security access control systems, general office administration, record management and customer service.
• Knowledge in security systems would be an advantage.
• Possess high level of integrity.
• Strong Command of English.
• Good written, verbal, analytical, interpersonal and presentation skills
• Proficient in Microsoft Office application, i.e. Word, Excel, PowerPoint, etc.

Please indicate in your profile your expected salary as you apply. Thank you.

Occupation

Quality Engineer (Aircraft Engine / Component Maintenance)

Job Description & Requirements

Key Job Accountabilities:

• Liaison with customer reps on documentation procedures including certification and maintenance release.
• Ensure all aircraft have valid documents such as Certificate of Registration, Certificate Of Airworthiness, Radio License, Insurance Certificate, etc as applicable.
• Conduct quality internal audits as scheduled by the Quality Audit Plan or as instructed by the Manager Quality.
• Carry out investigation into incidents, accidents,customer compliants and warranty claims.
• Carry out surveillance inspections at various stages of aircraft work in progress for correct maintenance practices, good housekeeping and proper documentation.
• Assist in the evaluation of new or amendments as appropriate of new or changes to existing contracted operators’ interface procedures.
• Carry out Airworthiness Directives review.
• Monitor and track contracted operators’ surveillance follow up action to closure.
• To consolidate the aircraft surveillance and investigation KPI on the program assigned.
• Any other duties as assigned by the Quality Manager.

Required Experience and Qualifications:

• Hold an Aircraft Maintenance Engineer’s License (AMEL) issued by the civil Aviation Authority of Singapore (CAAS) or a foreign equivalent license recognized by CAAS or an FAA A&P certificate or professional licenses relating to aviation.
• Minimum five years working experience in aviation industry.
• Shall possess Diploma in engineering or equivalent.
• Conversant with Airworthiness requirements and / or Quality Management System (AS9110).
• Able to perform internal and external quality audits is an added advantage.
• Strong knowledge of Microsoft Office applications.
• Excellent verbal and written communication skills.
• Able to work independently and in a team environment

Responsibilities:

• Focus on EASA and CAAS main changes under Direction of ARU Quality Manager to update when necessary.
• Perform internal audits as per internal audit schedule in accordance AS9110C and P-145 requirements
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Manage and update Quality procedures in the Quality Management System.
• Conducts trainings on quality subjects to staff to enhance understanding of subject as per training plan
• Ensure internal production quarantine item are managed timely and accurately
• Validate the qualification of new test equipment, Qualification of New Repair Capability & Qualification of New Test Bench
• Supporting India MRO Project Phase

Requirements:

• Min. Degree/ Diploma in Quality, Quality Management, Engineering or Equivalent
• Experienced in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop
• Experienced in Quality Auditing
• Experienced in Procedural and Process developments
• Knowledge in: AS9110C (ARU) & PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations
• 1 Year Contract position

Responsibilities:

• Focus on EASA and CAAS main changes under Direction of ARU Quality Manager to update when necessary.
• Perform internal audits as per internal audit schedule in accordance AS9110C and P-145 requirements
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Manage and update Quality procedures in the Quality Management System.
• Conducts trainings on quality subjects to staff to enhance understanding of subject as per training plan
• Ensure internal production quarantine item are managed timely and accurately
• Validate the qualification of new test equipment, Qualification of New Repair Capability & Qualification of New Test Bench
• Supporting India MRO Project Phase

Requirements:

• Min. Degree/ Diploma in Quality, Quality Management, Engineering or Equivalent
• Experienced in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop
• Experienced in Quality Auditing
• Experienced in Procedural and Process developments
• Knowledge in: AS9110C (ARU) & PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations
• 1 Year Contract position

Sr Manager, Membership & Quality Management

Star Alliance is the world’s largest airline alliance.

The vision of Star Alliance is “to be the leading global alliance for the high-value international traveler and the mission of the organization is “to contribute to the long-term profitability of its members beyond their capabilities.” The Star Alliance office in Singapore coordinates the global activities of the alliance including managing joint projects on behalf of its 26 member airlines.

Based in Singapore, the Senior Manager, Membership & Quality Management is a critical leadership position that will play a critical role in delivering the value provided by Star Alliance to the member airlines. This position requires a seasoned professional with a strong background in commercial, operational, and technical functions within the airline industry.

Job Summary

Membership

• Manage the Star Alliance Membership Portfolio of Full Star Alliance Members, Connecting and Intermodal Partners.
• Manage the implementation of business objectives and governance guidelines into day-to-day processes with the members.
• Prepare and conduct the Membership Liaison and Quality Committee, a key governance forum
• Management of Expert Communities in cross-functional business areas (Data analytics, Marketing/Brand, and commercial functions)
• Coordinating the full lifecycle management of Star Alliance members, from new carrier integrations, lifecycle, and exits of members.
• Planning membership entry and exit projects.
• Develop, implement, and maintain collaborative working procedures between Members and the Star Alliance management organization.
• Manage and develop the intra-alliance collaboration tools (Today: StarDesk), including Vendor, IT, procurement, implementation, and lifecycle management.

Business Development

• Manage the overall implementation of business-related compliance requirements for the Star Alliance Members.
• Manage the implementation and distribution of the annual release & publication of Star Alliance Core Values & Standards and the Customer Reference Guide

Quality Management

• Continuously monitor compliance adherence by Star Alliance members through central measurements and annual audits.
• Conduct the planning, organization, reporting and follow-up of member airline audits and passenger journey inspections.
• Continuous review and improvement of the Core Values & Standards, compliance management, and audit concept.

Your Profile

• University business degree, or equivalent.
• Minimum 5 years of relevant professional experience.
• Overall knowledge of the airline & aviation industry in strategic areas, airline corporate functions, quality management, and airline-industry related business functions.
• Advanced knowledge of airline partner and alliance management structures through all levels of collaboration.
• Effective communication and experienced in partner relationship management.
• Competent in negotiation and conflict management.
• Able to cope with time pressure, ability to work with speed, independently and in teams.
• Highly organized and self-motivated to meet critical deadlines by balancing and prioritizing multiple tasks.
• High service philosophy and professional working attitude with attention to detail and excellent follow-through.
• Excellent interpersonal skills & ability to interact appropriately with all levels of the organization.
• Experience in multiple stakeholder management an advantage.
• Able to travel worldwide.
• High level of proficiency in English is essential, as it is the sole language used for communication with Star Alliance Member Airlines and other external stakeholders.

We Offer

• Full-time position based in our Singapore office
• Travel Benefits
• Comprehensive medical & dental benefits

This is a unique opportunity for highly skilled professionals to apply their talent, creativity, and dedication to a global team focused on delivering value to frequent international travelers who travel on our member airlines.

If you believe you are the perfect candidate, then allow us to get to know you and submit your CV to [email protected].

Essential Responsibilities:

• Perform audits on Repair Source Substantiation (RSS) packages to verify repair characteristic accountability
• Review RSS audit results to identify trends and coordinate continuous improvement plans to improve NPI quality and first time yield.
• Develop quality system procedures for NPI process to ensure accuracy, compliance and consistency of NPIs delivered by Engineering team.
• Track and monitor post introduction NPIs for quality issues and drive Engineering/Shop for follow up improvements.
• Act as a focal point for all NPI-related queries and clarifications about Quality/regulatory requirements.
• Support conduct of shop internal audit plan as necessary.
• Drive and promote Quality culture and participate in EHS and other shop initiatives as necessary.

Qualifications/Requirements:

• Bachelor’s degree in Engineering from an accredited university or college (or equivalent)
• Minimum of 2 years relevant aerospace experience in repair/manufacturing or a quality assurance role
• Knowledge of general aviation legislation and quality systems (ISO9001/AS9100)
• Good command of written and spoken English
• Basic knowledge of PC software (Microsoft Office)

Desired Characteristics:

• Knowledge of repair/manufacturing fundamentals
• Holds a recognized Lead Auditor or Internal Auditor certification
• Knowledge of Six Sigma quality concepts and tools.
• Knowledge of manufacturing special processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)
• Knowledge of RCCA/HF techniques
• Good initiative and analytical skills
• Six Sigma Green Belt certified.
• Strong attention to detail and accuracy
• Ability to communicate at all levels of the organization
• Demonstrated oral and written communication skills
• Strong interpersonal and leadership skills
• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytica-minded, challenges existing processes, critical thinker

About SAESL
A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.
• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL
• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities
• Update the Maintenance Organization Exposition manuals, and associate documents.
• Actively drive the Safety Management System and manage the Hazard Identification & Risk Assessment system
• Conduct internal and vendor audits (SMS, SABRe, Part 145 regulations, ISO, Nadcap) to improve compliance
• Actively support external audits (SMS, SABRe, Regulatory Authorities, Customers, ISO, Nadcap)
• Monitor and analyze audit/investigation/voluntary reporting data and identify issues/opportunities for improvement
• Review / support vendor & customer quality questionnaire
• Develop and conduct regulation trainings
• Manage staff authorisation system by reviewing the qualifications and conduct competency interviews for certifying staff & internal stamp holders
• Actively drive initiatives like Narrate & Demonstrate (N&D), Behavior Based Safety (BBS), Foreign Object Damage (FOD),
• Drive the SAESL Operating System and SAESL Enhanced Work Streams (SEWS) to inculcate strong safety culture
• Take on ad-hoc projects / assignments to promote safety culture


Requirements
• Diploma / Degree in Mechanical / Aerospace Engineering
• Good knowledge on regulatory Part 145 requirements, ISO9000 and Nadcap
• Knowledge on data analysis and its tools (Minitab, Power BI etc) will be added advantage
• Qualified Lead Auditor and have experience in conducting aviation safety and regulation audits
• Min 3 years of experience in managing the Quality Management System and Safety Management System

Apply Here --> https://saesl.applyourjobs.com/

Essential Responsibilities:

• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Customer Disruptions and improve customer satisfaction.
• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Workmanship/ WIP Losses, Rework and Turnbacks, and improve FTY, delivery performance, and COQ.
• Partner and engage with Operations/Engineering teams to facilitate and drive avoidance of repair-induced Departures.
• Track and monitor quality metrics (Yield, Losses, Escapes), and perform trend analysis to identify systemic improvement opportunities.
• Drive engagement & training of inspectors and certifying staff to ensure disposition & inspection
• Drive engagement and participation in Lean and quality improvement across the site.
• Drive and promote Quality culture and participate in EHS and other shop initiatives as necessary.
• Act as focal point for all quality matters and clarifications for the business unit.
• Support internal audits and perform CAR verifications.
• Support, review and approval of New Product Introduction (NPI) and Process Change Notice (PCN) initiatives.

Qualifications / Requirements:

• Bachelor’s degree in Engineering from an accredited university or college (or equivalent)
• Minimum of 2 years relevant aerospace experience in repair/manufacturing or a quality assurance role.
• Good command of written and spoken English
• Basic proficiency with of PC tools and software (e.g. Microsoft Office)

Desired Characteristics:

• Knowledge of manufacturing processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)
• Demonstrated work experience in reading and interpreting blueprints or engineering specifications;
• Knowledge of repair/manufacturing fundamentals
• Holds a recognized Lead Auditor or Internal Auditor certification
• Knowledge of Lean and Six Sigma quality concepts and tools.
• Knowledge of RCCA/HF techniques
• Knowledge of Lean concepts and tools.
• Knowledge of general aviation legislation and quality systems (ISO9001/AS9100)
• Good initiative and analytical skills
• Strong attention to detail and accuracy
• Ability to communicate at all levels of the organization
• Demonstrated oral and written communication skills
• Strong interpersonal and leadership skills
• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed ​
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Job Responsibilities

• Provide assistance to the Head of Departments to develop and implement strategic plans – may include developing short and long-term plans for BCAPD APAC to ensure its growth and sustainability.
• Managing and assessing risks that could impact the bank’s operations such as identifying potential risks, developing mitigation strategies and monitory the effectiveness of these strategies.
• Managing regulatory compliance and ensuring the countries in APAC comply with all relevant local regulations, laws and Head Office guidelines.
• Ensuring financial stability which involves developing and managing budget allocations to countries and headcount management for BCAPD APAC within stipulated guidelines.
• Leading and managing teams across the various groups by ensuring the members are aligned with the organisation’s goals and objectives – fostering a culture of continuous improvement, collaboration and teamwork.
• Supporting Head of Departments on people management within BCAPD APAC such as talent mobility to groom younger generation leaders and driving performance management.
• Managing effective communications with Head Office, Countries Heads and GMs and Group Heads within BCAPD, Business & Control Functions Heads and relevant authorities whenever necessary.

Job Requirements

• Bachelor’s degree in business administration or banking and finance.
• Experience in areas of strategic planning, risk management, compliance or operations management (including overseas operations), budget management and internal controls management will be advantageous.
• Strong and effective communication skills are essential to manage stakeholders. relationships.
• Possess a strong understanding of relevant laws and regulations to ensure compliance are adhered.
• Ability to think strategically and develop long-term plans and goals.
• Strong analytics skills in assessing risks and opportunities to make informed decisions.
• Proficiency in both English and Japanese is highly preferred as this role needs to prepare reports in Japanese for reporting to Head Office in Japan. This role also needs to present and communicate with stakeholders and counterparts in Tokyo Head Office who mainly communicate in Japanese.

· At least 10 years experience

· Willing to work on holidays/work on shifts/change of shift

· Able to work for long hours

· Can work between different locations

• Set detailed guidelines on what needs to be checked and what the quality standards are
• Update our Quality Management System (QMS) with incidents, fixes and improvements
• Audit our systems based on ISO 9001:2015 requirements
• Determine quality metrics for all manufacturing procedures
• Monitor the entire production cycle and perform regular tests to identify potential malfunctions as early as possible
• Inspect product materials and electrical systems for defects and durability
• Identify the root of technical issues and recommend fixes
• Prepare reports on malfunctions and corrective actions (e.g. number of defective raw materials per order)
• Review current blueprints and quality documentation
• Set and track quality assurance goals (e.g. reduce average turnaround time for quality checks by 20%)
• Coordinate with external quality assurance auditors and technicians to ensure legal compliance
• Work with internal teams to increase customer satisfaction by improving the quality of the products

We are looking for motivated and analytical individuals who play an important role in enhancing Changi Airport's operational performance in safety, capacity and efficiency. Your role requires you to have in-depth knowledge of airfield and flow to manage airside operations at Changi Airport.

To ensure a high-performing airside operation, you will be the key conduit between stakeholders which includes airlines, ground-handlers, Air Traffic Control, CAG divisions, etc. You will provide operational guidance and support to strive for optimal on-ground execution to enhance Changi’s safety, capacity and efficiency. You will perform quality assurance and engage stakeholders to improve operational processes. You will monitor and analyse the factors that result in sub-optimal performance for the airside operations, provide recommendations and work with stakeholders to formulate solutions to resolve them. You will also be involved in projects related to optimize Changi Airport’s capacity and improving efficiency of business operations. You will develop proposals/ recommendations to solve complex operational challenges and develop contingency plans to handle operational incidents.

Requirements:

• Good degree in any discipline with at least 2 years of work experience . Familiarity with airport planning/operations, ground handling operations is a plus.

• Strong written and verbal communication skills, to be able to put your ideas across to internal and external stakeholders.

• Data analytical capabilities and programming know-how will be advantageous.

• Motivated team player, able to handle fast-paced projects and adapt to constant changes.

• Fast learner with the willingness to contribute to a wide spectrum of operational areas.

Job Responsibilities:

Provide effective support and assistance to the Team Leader / Deputy Group Head in the daily operations of the Operations Control Group (OCG) mainly Account Services, Credit Limit Setup, Audit Confirmation & related Customer Services.

• Process transactions / requests in compliance with the Bank's Policy & Procedures, Head Office Rules in alignment with the local and related overseas laws and regulations. End-to-end understanding in terms of Controls associated with transaction / request processing must be robust.
• Observe the rules and regulations of the Compliance Manual of the Bank associated with the Anti-Money Laundering, KYC requirements, MAS regulations, etc.
• Participate actively with the Team Leader / Deputy Group Head in resolving operational issues, and manage change projects (including Business Analysis, support UAT planning & execution).
• Identify areas to improve the operational efficiencies (proactively contribute to Time & Cost Savings) and effectiveness (controls) of the Group, and propose and support the implementation of improvements of workflows & processes.
• Investigate and report discrepancies and irregularities arising from transactions, system failure, etc. and resolve issues including handling customer / stakeholder's complaints and escalating all issues promptly.
• Participate actively in the various Business Continuity Plan Drills which are held regularly by the Bank and the local regulatory authority.
• Cross-train other colleagues within Team OCG to ensure there is sufficient back-up to cover each process from time to time.

Job Requirements:

• Degree in Banking & Finance or equivalent.
• At least 3-5 years of Banking experience in Managing Customer Account Setup, including Maintenance, Offboarding & issuance of Audit Confirmation.
• Proficient in Microsoft Office with immediate Microsoft Excel skills.
• Possess critical thinking skills, and able to link diverse information to build a full picture and spot inconsistencies.
• Meticulous, attention to detail with a risk and control mindset.
• Good oral & written communication skills, strong inter-personal skills, and a strong customer service aptitude.
• Reliable team player, who is able to work with a diverse group of people.
• Keen and proactive learner.
• Effective time management skills, ability to work under pressure and meet cut-off times.

To perform Quality Control functions within the Material Receiving, Label Control, Distribution and Production areas in order to assure material and products are sampled and released in compliance with agreed specifications and timelines.

Responsibilities:

Quality Control functions within Material Receiving:

• Perform incoming goods sampling, inspection and approval.
• Ensure any customer specific requirements have been carried out by Logistics during booking-in and Quality Control during the approval process.
• Sample materials upon customer request.
• Carry out expiry and status changes of materials upon request.
• Travel abroad when required to aid the inspection, approval and sampling of materials for Almac Clinical Services.
• Ensure Sampling areas are cleaned and perform area clears after sampling has been completed.
• Ensure Almac Clinical Services adherence to cGMPs, SOPs and Customer instructions through performance of job function.
• Monitor storage area environmental conditions.

Quality Control functions within Label Control and Distribution:

• Inspect and approve Clinical Labels prior to issuance to packaging operations, distribution and direct dispatch from Almac Clinical Services. Record results electronically.
• Perform electronic inventory transactions to make labels available to Production.
• Advise Label Control and Distribution personnel on accept / reject criteria and on general issues.
• Approve Label Verification projects used to perform a fully automated inspection of labels.
• Approve randomisation files for use by the label verification system.
• Apply and remove electronic holds on distribution orders.
• Perform verification checks on documentation and clinical material prior to distribution from Almac Clinical Services.
• Approve Depot Shipment paperwork.

Quality Control functions within Production:

• Perform regular in-process quality checks on products, processes, room layout and safety to ensure compliance with GMP and Almac Clinical Services procedures Perform end of operation documentation checks and associated electronic transactions.
• Advise Production personnel on accept/reject criteria and on general issues.
• Review log books and perform facility inspections.
• Instruct Production personnel on cleaning methods and perform area clearance checks, this includes the corridors and changing areas.
• Perform sampling and Inspection operations as requested.
• Perform calibration checks on balances and scales used in the Almac Clinical Services facility.
• Accompany Almac approved contractor when performing Environmental Monitoring.
• Travel abroad when required to aid the inspection of labelling operation.
• Perform inspection on JTM related activities e.g. printed clinical labels, labelled clinical materials and review JTM batch documents.

In General:

• Perform Destruction duties as required.
• Assist in client audits.
• Instruct relevant personnel on cleaning methos in the event of spillage.
• Monitor environmental conditions in storage and production areas. Alert QC Supervisor / Manager immediately when there is an excursion of environmental condition.
• Assist with the allocation and prioritising of duties for Materials Receiving, QC Label Control & Distribution and Production personnel.
• Check documentation for completeness and accuracy. Identify any deviations from written procedures and inform relevant personnel.
• Assist and deputise for the Quality Control Supervisor.
• Contribute to the review and writing of quality procedures, including the development of new SOPs and revision of existing SOPs.
• Assist with training and development of QC Materials Receiving, QC Label Control & Distribution and Production personnel.
• Attend meetings when required.

Criteria:

• Diploma in sciences or life sciences discipline
• Knowledge of GMP
• Excellent verbal and written communication skills
• Ability to demonstrate a logical approach to problem solving
• Ability to use initiative and to prioritise tasks
• Ability to work to consistent high standard under pressure
• Be willing to train others when required
• Ability to demonstrate strong attention to detail

Careers That Change Lives

This role will lead initial set up of Quality Systems for a new entity to meet local medical device regulations and China Good Manufacturing Practices.

A Day In The Life:

This role will Ensure products manufactured by contract manufacturer meet all defined specifications and are developed and manufactured in compliance with all applicable quality system requirements and provide leadership to work with different Medtronic entities and set up the strong relationship to support the implementation of Quality Systems for the new entity in implementing China localization strategy.

Primary Responsibilities

• Set up the Quality Systems to it meets Singapore, China and requirement countries requirement.
• Establishes quality programs and initiatives to ensure products and assemblies are developed and manufactured per applicable requirements.
• Establish strong supplier control and Quality oversight over suppliers and Medtronic entities.
• Driving continual and preventive improvement of quality management systems in supporting the conformity of process and product quality.
• Supports and develops systems for the identification, analysis, correction, and prevention of quality issues.
• Contributes quality expertise to product development and manufacturing transfers including working closely with suppliers to implement robust manufacturing processes and Quality oversight.
• Oversees and lead key quality systems processes to ensure its effectiveness which includes Design Control, Supplier Controls, Quality Planning, Document Controls, Training, Audits, Change Controls, Nonconformance CAPA, Manage External Requirement, etc.
• Leads the site audit readiness and manages, conducts and coordinates external (Singapore, China, ISO, etc.) audits.
• Take preventive actions to improve the compliance and effectiveness of Quality Management Systems by proactive learning from other sites and best practices from the industry.
• Provides QA support, participate and collaborate with Operating Units improvement program
• Works with local management team members in developing long and short-term quality goals and strategies.
• CAPA board memberParticipate in CAPA and board meetings to review the trending of all input sources and determine if any further action is needed
  Perform review on the CAPA investigation, action plan and effectiveness to determine if CAPA process requirement are fulfilled.
  
• Represents the new entities to collaborate with peers across all Operating Units for global quality initiatives and works closely with peers on similar quality concerns between Medtronic sites

Responsibilities

• Perform AML monitoring/review on Trade post-transaction files.
• Review/investigate Trade manual screening alerts and red flag escalated by trade processing team for potential sanction violations in accordance with SMBC policies.
• Ensure that review and investigation conclusions are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable
• Perform daily name screening alert clearance
• Investigate and report discrepancies and irregularities arising from transactions, system failure, etc and resolve issues including handling stakeholder’s complaints and escalating all issues to Group Head / Deputy Group Head promptly.
• Other tasks as assigned by Group Head / Team Lead
• Regular update of Procedures and Manuals to ensure the group operations is in accordance to SMBC policies, audit comments and in compliance to local as well as related overseas law and regulations
• Contribute in key initiatives and other ad hoc projects as needed

Requirements

• Bachelors degree
• Able to link diverse information to build a full picture and spot inconsistencies
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening
• Strong team player
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and back office

Job Description:

• To ensure electrical, instrumentation and control engineering technical scope performance meeting the project specification, budget and stakeholder expectation.
• Identify and responsible the electrical, instrumentation and control engineering deliverables.
• Responsible the electrical, instrumentation and control engineering change order and meeting the delivery lead time and stakeholder expectation.
• Able to read and implement the project technical specification to the project deliverables.
• Attend client/ consultants meeting for technical clarifications and related activities.
• Facilitate the generation of the control, electrical and instrumentation engineering risks and mitigations for the project risk register.
• Manage the electrical and instrumentation package vendors and review vendors’ quotation
• Ensure CIE engineering is completed accurately within schedule and budget
• Conduct FAT/SAT and equipment troubleshooting
• Prepare panel drawings, circuit drawings and all electrical documents
• Prepare instrument data sheets and instrument list
• Prepare automation engineering documentation such as functional description specifications, control philosophy, control system architecture
• Design of Electrical & Instrumentation panels based on water and wastewater treatment process requirements (focus on RO & MBR applications basis)
• Identify instruments, electrical equipment and components to procurement.
• Any other duties commensurate with the role.

Requirements:

• Degree in electrical engineering, electrical and electronics engineering, control and instrumentation or related fields
• Experience in water and wastewater treatment projects a plus
• 5 years and above experience.
• Experience in the industries standard, NORSOK, NEK, PSA, IEC, BS & etc. and hazardous areas classification.
• Willing to travel overseas
• Good verbal and written communication skills in English • General computer knowledge is essential (MS word, excel, PowerPoint, MS Outlook).

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

Key Job Accountabilities:

· Liaison with customer reps on documentation procedures including certification and maintenance release.

· Ensure all aircraft have valid documents such as Certificate of Registration, Certificate Of Airworthiness, Radio License, Insurance Certificate, etc as applicable.

· Conduct quality internal audits as scheduled by the Quality Audit Plan or as instructed by the Manager Quality.

· Carry out investigation into incidents, accidents,customer compliants and warranty claims.

· Carry out surveillance inspections at various stages of aircraft work in progress for correct maintenance practices, good housekeeping and proper documentation.

· Assist in the evaluation of new or amendments as appropriate of new or changes to existing contracted operators’ interface procedures.

· Carry out Airworthiness Directives review.

· Monitor and track contracted operators’ surveillance follow up action to closure.

· To consolidate the aircraft surveillance and investigation KPI on the program assigned.

· Any other duties as assigned by the Quality Manager.

Required Experience and Qualifications:

• Hold an Aircraft Maintenance Engineer’s License (AMEL) issued by the civil Aviation Authority of Singapore (CAAS) or a foreign equivalent license recognized by CAAS or an FAA A&P certificate or professional licenses relating to aviation.
• Minimum five years working experience in aviation industry.
• Shall possess Diploma in engineering or equivalent.
• Conversant with Airworthiness requirements and / or Quality Management System (AS9110).
• Able to perform internal and external quality audits is an added advantage.
• Strong knowledge of Microsoft Office applications.
• Excellent verbal and written communication skills.
• Able to work independently and in a team environment

Responsibilities

• Prepare QA/QC procedures, Project Quality Plan, Method Statement, checklist and inspection form with project team members
• Monitor daily site QA/QC activities, ensure that QA/QC procedures, Method Statement and Project Quality Plan is adhered by the project team members
• Conduct raw material inspection, site inspection, testing, post installation check out (PICO) and issue QA/QC inspection report
• Monitor and ensure all the tools and equipment are calibrated when it is due and update in Tools and Equipment List FY XXXX
• Investigate the cause of non-conformance with project team members and recommend corrective / preventive actions, if require to prevent recurrence
• Ensure that all audit findings on non-conformance findings / reports and punch lists are properly addressed and closed together with the client
• Ensure proper documentation and filing of QA/QC records
• Conduct internal quality audit based on project quality plan and client requirement
• Attend client QA/QC meeting
• Assist in preparation of Final Documentations for handover to clients

Qualifications and Work Experience

• Diploma in relevant engineering
• Accredited ISO 9001 internal auditor certificate is an advantage
• Good QA/QC knowledge on electrical, signal and communication inspection and testing
• Good knowledge on interpretation of electrical drawings
• Good interpersonal, analytical and problem-solving skill
• Able to work independently
• Good oral and written communication skills
• Good Microsoft office knowledge and skills