• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24124

What will you do?

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.

In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Supporting Electrical and Automation at Tuas plant.

Responsibilities:

· Responsible for safety personnel and plant.

· Participate directly in site emergency response team.

· Troubleshoot and repair a variety of complex liquid, drying and powder processing, and packaging equipment.

· Back up and maintain PLC, HMI, VSD and other controller program and software version.

· Troubleshoot automation issue by hardware or instrument, program setting/bug and connection issue.

· Knowledge in Alen Bradley PLC, Wonderware SCADA and In Batch system for Troubleshoot automation related in Dry Blending, Filling and Packaging system.

· Evaluation of P&IDs, functional design specification.

· Responsible for performing PM’s and work orders as well as project work.

· Disassembly, diagnosis, repairs and re-assembly of machinery to hygienic and sanitary standards.

· Participate in the development of a Predictive Maintenance program at Tuas.

· Complete all necessary reports and documentation via hardcopy and computer.

· Communicate with Engineering technician on any major process issues as and when required.

· Maintain a clean and sanitary environment in accordance to all safety and GMP policies.

· Be able to use independent judgment and work well within a team concept.

· Interact with internal and external customers in a professional manner.

· Follow all cGMP requirements to ensure proper manufacturing environment.

· Actively participate in the resolution and elimination of downtime issues.

· Assist in the creation of SOP’s, checklist, and work instructions.

· Complete all necessary transactions, reports and documentation with accuracy and timeliness.

· Maintain a clean and sanitary environment to 5S or similar standard.

· Adhere to the Tuas Code of Conduct.

· Provide technical assistance and support regarding all projects, installations, and repairs.

· Maintain smooth communication with different levels of departments and peers.

· Upgrade hardware and software for improved process control.

Requirements:

· Nitec/Higher Nitec/Diploma in Electrical & Electronics / Mechatronics equivalent qualifications.

· At least 3 years of industrial automation & maintenance experience.

· Previous experience in a food or pharma manufacturing environment is preferred with experience and knowledge in Automation and predictive and preventative maintenance technologies.

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Responsible for inspection of parts and products and ensuring that they comply with the set standards and specifications
• Ensure that all inspection check sheets are duly completed
• Ensure that non-conformance parts and products are not released to the customers
• Ensure that defects are corrected before releasing them to Production
• Ensure that corrective or preventive action are in place and sustained
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job Requirements:

• Minimum NTC2/3, ITC in Mechanical/Mechatronics/Precision Engineering
• At least 1 year of experience in quality control and related work
• At least 1 year of experience in the operation of CNC machines
• Basic knowledge of Microsoft Office tools: Excel, Word, PowerPoint

RESPONSIBIITIES & DUTIES

* To design, write & troubleshoot machine electrical & control systems for factory automation, smart-factory technologies as well as AI platform.

*To design and perform detailed designing for machine electrical control systems for Factory Automation, Smart-Factory Technologies, Machine & Equipment Manufacturing.

*To write Programmable Logic Control (PLC) program for automatic machine control & processes. Preferably, with Industrial PC (IPC) programming experiences too.

* To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new projects proposal and confirmed projects.

*To lead the in-house electrical staff and/or the company’s appointed electrical vendors on the respective machine control and electrical systems and operations of the projects.

*To lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company and/or customer site.

*To spearhead meetings and review with the design team and the customers on control system requirements and specification.

SMART-FACTORY TECHNOLOGIES & SOLUTIONS

*To team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects.

*To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

*To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.

PROGRAMMING SKILLS & REQUIREMENTS

* PLC based system: ladder, functional block, structure text

* PC based system: C++, VB (visual basic)

Administered by the Workforce Advancement Federation (WAF), the Career Conversion Programme (CCP) for Biomedical Manufacturing Executives is a premier talent development initiative designed to cultivate the next generation of skilled professionals for Singapore’s Biomedical manufacturing industry. This comprehensive 15-month programme features structured on-the-job training (OJT) provided at Novartis Singapore Pharmaceutical Manufacturing Pte Ltd (NSPM), facilitating the practical application of acquired knowledge and ensuring participants develop the essential competencies required for their roles.

Eligilibity for CCP:

• Singapore Citizen or Permanent Resident;

• Minimum 21 years old;

• Mid-Career Individual: Graduated, or completed National Service, whichever is later, for at least 2 years* prior at the point of application; or

• Fresh Graduate: Graduated, or completed National Service, whichever is later;

• Not in a similar job function prior to joining Career Conversion Programme (CCP);

• Have not attended the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously;

• Have not been funded under the same programme – Career Conversion Programme (CCP) for Biomedical Manufacturing Executives / Professionals (Train-and-Place with Commitment to hire) – previously.

• Should not be shareholders, immediate ex-employees of Novartis, or be related to shareholders of Novartis.

Successful candidates must be able to commence the program by March 2025.

Job Purpose

Support all activities in maintaining a QC IPCDS lab in BioPharmOps QC. Testing of in-process control & drug substance samples, to support production needs and document in accordance with written testing SOP’s and in accordance with local/ international regulations.

Key Responsibilities

• Maintain QC IPCDS laboratory in full cGMP-compliance.

• Track and execute individual training requirements to ensure completion on time including new methods and instrumentation.

• Ensure laboratory operations are in accordance to cGMP standards

• Perform raw material testing in accordance current testing monographs/SOPs and in accordance with local/ international regulations.

• Ensures that testing completed in a timely manner based on plan.

• Support laboratory routine operations such as inventory management and house-keepings.

• Support the optimization of work flows in the QC IPCDS Laboratory.

Requirements

• Minimum Diploma with 4 to 5 years relevant working experience in GMP-regulated industries in Quality Control. Fresh graduates are welcome to apply.

• New entrants to biopharmaceutical industry and should not be holding a bond obligation with any organisation

• Background knowledge on analysis such as HPLC, UV Spectrophotometer, pH/Conductivity meter, Total Organic Carbon (TOC),

• Preferrably a working knowledge of FDA and ex-USA regulatory requirements as well as industry quality management tools, standard, and quality systems.

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Responsibilities

· Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities, following blueprints and wiring diagrams

· Installs conduit to bulkheads with brackets and screws, using hand tools, and threads wires through conduit to terminals, for example connection boxes, circuit breakers, voltage regulators, and switch panels.

· Tests electrical characteristics, for example, voltage, resistance, and phase angle, in circuits, using voltmeters, ohmmeters, and phase rotation indicators

· Troubleshoots electrical equipment and circuits using appropriate test equipment to detect and effect required maintenance, repairs, or replacement requirements

· Performs maintenance and repair of generators, switchboards, controllers, circuit breakers, electrical motors, distribution panels, alarm and lighting circuits

· Conducts insulation resistance measurements of electrical cables to determine condition and effects repairs or replacements as required.

· Maintains electrical system maintenance histories notating date, and extent of repairs and/or alterations

· Adhere to Bizsafe safety standards and ISO quality standards

· Electrical automation control system: to install, troubleshoot, repair and modify the new control system.

Requirements

·Willing to work in outdoor harsh conditions e.g heat, oil, noise and dust

·NTC/Higher NTC in Electrical/Mechatronics/M&E Engineering and related field.

·Preferably with at least 1- 2 years working experience in electrical repairs and maintenance.

·Preferably to have experience in DC/AC motors, Generators, Switchboards and Circuit breakers.

·Able to perform troubleshooting and fault rectification during daily operations

·Positive-attitude

·** High OT

Roles & Responsibilities

Driver - Responsibilities

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company lorry to pick up workers, to or from site, office and dormitory etc.

1.1 The Driver must drive the vehicles to the required work sites punctually.

1.2 The Driver must follow the schedule or ad-hoc obtained from the Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

1.3 The Driver must inform the Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

1.4 Aside from driving the workers to site, rest of the time will be to support office courier needs.

2 Usage of Company vehicles

2.1 The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

2.2 The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. Otherwise, costs will not be reimbursed.

3 Safety

3.1 The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

3.2 If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

3.3 The Driver must inform the Director or PIC immediately that he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

3.4 The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

3.5 The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

4.1 The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

4.2 The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

4.3 The Driver will drive the vehicles to Inspection Centres as required.

The above is an overview of the work scope and responsibilities of a Driver employed by the Company. It is by no means an exhaustive list. There may be other scope and responsibilities deemed normal by the industry which by default will be included in this Appendix.

Schedule:

Day shift: 5.5 days per week

Requirement:

1. Minimum Class 3 Singapore Driver's license

2. Familiar with the marine industry procedures

3. Good driving track record

4. Familiarity with Singapore roads and ERP time

5. This job may require some late work. OT allowance will be given.

6. Fit and in good health

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform corrosion monitoring inspection and coordination with NDT team
3. Submit daily and weekly reports to client on the inspection findings.
4. Perform QA/QC welding inspections at site.
5. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc
6. Provide Lead auditor services for various clients at various manufacturing companies.
7. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have Diploma or bachelor degree in engineering
2. Must have valid API 510, API 570 and API 653 Certificate.
3. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1
4. Must have NDT level II certificates in MPI, PT, UT and RT
5. Must have IRCA QMS lead auditor certification.
6. Must be a Saudi Aramco and Singapore welding society approved welding inspector
7. Must have more than 5 years’ work experience in Shell Bukom.
8. Knowledge in code book like AWS, ASME, API codes
9. Must have a good knowledge about MT,PT,UT,RT Methods.
10. Must having an inspection experience in Exchanger,pressure vessels, Pumps, compressors, valves, well head equipment’s, Tanks and Piping.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

• Assist senior surveyors on board tankers and carry out proper reference sampling of various liquid cargoes.
• Assist senior surveyors to perform inspection of loading, unloading and transshipment of bulk liquid product, crude tankers.
• Assist senior surveyors to measure shore tanks and ships’ tanks and ascertain volumes and weights of cargo according to SGS Standard method of calculation.
• Maintenance of equipment, apparatus and bicycle used.
• Perform any other responsibilities as assigned by Management.

Requirements:

• Willing to work long and irregular hours
• Entry level candidates are welcome to apply.
• Willing to work offshore when required
• Able to coordinate and be a team member towards a common goal
• Able to work independently and to coordinate several activities simultaneously
• Able to interact with all levels of management, affiliates, suppliers and clients
• Good communication and interpersonal skills
• Acts quickly and decisively
• Works well under pressure
• Good command of the English language (spoken and written)
• Applies judgment and acts according to the SGS standards of ethics and integrity

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self discipline.

KEY DUTIES AND RESPONSIBILITES:

· Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.

· Preparation of reagents/diluents/ dissolution media as per STP.

· Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.

· Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.

· Ensure implementation of SOP for all corresponding activities.

· Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.

· Ensure real time documentation, maintain data integrity and appropriate traceability.

· Assist in maintenance and calibration of test instruments per specifications.

· Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.

· Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.

· Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.

· Responsible for QC lab and equipment/instrument cleanliness.

· Responsible for procuring and receipt of QC lab glassware and consumables.

· Any other activities as and when assigned by the Superior.

EDUCATION:

· Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

· (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.

· (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

KNOWLEDGE & SKILLS:

· Possess working knowledge of GMP in the pharmaceutical industry.

· A good team player with positive learning attitude.

· Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Primary responsibilities:

• Participate in projects for customers as a Lead EMVCo/Visa/Mastercard Evaluator to be responsible for the technical and/or methodological quality of projects.

Specific responsibilities:

• Participate in projects for SGS Brightsight customers as a Lead EMVCo/Visa/Mastercard Evaluator.
• Evaluate payment related products for different customers with in-depth understanding of the total field of EMVCo/Visa/Mastercard and the causes of security demands in evaluation methods.
• Responsible for the technical and/or methodological quality of projects.
• Represent SGS Brightsight in the field of EMVCo/Visa/Mastercard to customers and during conferences and events.
• Actively involved in defining internal R&D programs and take an active role in supporting the acquisition of projects.
• Guide other colleagues in their development and communication to customers.
• Applies judgement and acts according to SGS standards of ethics and integrity.
• Any other adhoc duties as assigned

Requirements:

• Bachelor Degree in a technical field of study such as Information Technology, Electronics, Physics, Mathematics or equivalent.
• Minimum 5 years of relevant experience.
• Proven experience in EMVCo/Visa/Mastercard projects preferably as an Evaluator but otherwise as a Consultant or Developer.
• Track record in EMVCo/Visa/ Mastercard projects.
• Familiar with the international schemes and contributed to several certificates for EMVCo/Visa/ Mastercard evaluations.
• Hands-on knowledge of security tools and solutions.
• Ability to understand laws and regulations as it applies to payment industry Security & Risk.
• Hands-on experience in security systems including IC's, SOC's, hardware security features and attacks, payment systems.
• Possess a hacker mentality.
• Ability to build and maintain relationships, to understand client needs and deliver to meet their expectations.
• Willingness and ability to travel if and when required.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Work alongside building security and maintenance staff to ensure SGS facilities and grounds are clean and safe. Oversee all aspects of building functions and ensures the safety and functionality of all facilities. Duties include running routine safety inspections, corresponding with contractors, planning maintenance work, maintaining records, and supervising facilities staff. Have high multitasking and organizational abilities.

Job responsibilities:

• Ensure all building facilities adhere to proper safety standards and cleaning procedures
• Keep building and all facilities up to code and accurately follow maintenance protocol
• Maintain equipment, building provisions as well as security and fire systems to meet health and safety requirements
• Maintain utilities and maintenance schedules
• Organize, plan and coordinate facility refurbishments
• Communicate and liaise with appointed building management agent, landlord, external contractors, vendors and relevant authorities
• Delegate and supervise cleaning and maintenance responsibilities of contractors and vendors
• Run routine maintenance inspections of facility and designated carpark lots
• Monitor interior and exterior areas of building for cleanliness and general conservation
• Prepare and implement cost estimates, budgets and timeframes of scheduled or ad hoc facilities projects
• Comply with all health and safety policies and procedures
• Support maintenance and installation works as needed including scheduled and unscheduled building power shutdowns
• Coordinate and manage all company vehicle related matters
• Respond to all building related emergencies
• Assist in fire evacuation drills.
• Assist in any other facility related activity that may arise from time to time

Requirements:

• Diploma in Facility management or equivalent
• Basic knowledge of HVAC and other building systems with mechanical and plumbing skills
• Valid Class 3 driving license
• Minimum 1 year relevant experience in similar facility operation & maintenance environment
• Excellent time management and multitasking skills
• Strong attention to detail
• Basic understanding of accounting and finance principles
• Good verbal and written communication skills
• Good problem-solving skills
• Contract handling experience
• Ability to engage in occasional heavy lifting and do other labour-intensive tasks

Responsibilities :

• Familiar with evaluation of tender, preparation of tender & quotation
• Responsible for taking off measurement & monthly progress claim
• Carry out Quantity take-off for tendering of projects
• Ability to source for supplies and sub-contractors for quotation for tendering
• Evaluation and certificate of sub-contractors' progress payments
• Project administration and documentation include preparation of interim
• Carry out miscellaneous tasks required as part of ISO Quality Management System
• Review and advise the Project Manager on the cost impact for variation of project specification
• Other quantity surveyor duties as assigned

Requirements :

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey or equivalent.
• At least 5Year(s) of working experience in the related field is required for this position.
• Preferably Senior Executive specialized in Quantity Surveying or equivalent.

Job Descriptions:

• Perform accurate mechanical, physical and visual inspection of components
• Ensure that all parts and components have been tested and measured within specifications/tolerances.
• Initiate Non-Conformance reports as required.
• Communicate with supervisors, mold technicians and other staff to resolve inspection questions.
• Accurately document the results of the inspections and testing on the computer in various programs
• Read and interpret specifications and drawings
• Report any product defects immediately to the technician
• Support the implementation of ISO registration, compliance and audits
• Maintain calibration, first article, internal auditing and training programs
• Direct customer and supplier support for quality matters verification if required

Job Requirements:

• Minimum ITE in engineering or other relevant fields with 3 years of experience
• With relevant Quality Control experience in Plastics Mold preferred
• Practical understanding of precision tooling
• Ability to use basic hand measurement tools (calipers, micrometers, gauge pins, etc.) required
• Experience with visual and touch probe CMMs (Zeiss, Nikon) and Optical comparator desired
• Experience with metrology, GD&T, technical drawing reading
• Fluency in ISO program management and implementation is an asset
• General computer proficiency
• Able to perform Over time
• Able to perform rotating shift

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.