Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

* Cleaning service

* Location: Changi Airport

* 5.5days

* 8:30am - 5:30pm

Job Description:

• Collaborate with the Resident Manager & Assistant Managers to establish standard operating procedures for ground operations.
• Inspect daily tasks performed by ground staff.
• Employ a coaching approach to reinforce SOPs with ground staff: supervisors and housekeeping staff.
• Mentor new staff during orientation.
• Implement skills enhancement programs for ground staff to boost performance.
• Update training schedules for cases of non-conformance and monitor improvements to bridge skills gaps.
• Coordinate and conduct training sessions on safety, quality, and environmental subjects.
• Undertake any other assigned ad-hoc tasks by the Manager.

Job Requirement:

• Possess a minimum Diploma/Degree in a relevant field of study and be open to training.
• Proficient in Microsoft Office applications (Excel, Word, etc.).
• Capable of working independently and thriving under pressure.
• A team player who can handle multiple tasks in a fast-paced setting.
• Willing to work shifts and overtime occasionally.
• Good communications skills are preferred.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

* Cleaning service

* Location: Changi Airport

* 5.5days

* 8:30am - 5:30pm

Job Description:

• Collaborate with the Resident Manager & Assistant Managers to establish standard operating procedures for ground operations.
• Inspect daily tasks performed by ground staff.
• Employ a coaching approach to reinforce SOPs with ground staff: supervisors and housekeeping staff.
• Mentor new staff during orientation.
• Implement skills enhancement programs for ground staff to boost performance.
• Update training schedules for cases of non-conformance and monitor improvements to bridge skills gaps.
• Coordinate and conduct training sessions on safety, quality, and environmental subjects.
• Undertake any other assigned ad-hoc tasks by the Manager.

Job Requirement:

• Possess a minimum Diploma/Degree in a relevant field of study and be open to training.
• Proficient in Microsoft Office applications (Excel, Word, etc.).
• Capable of working independently and thriving under pressure.
• A team player who can handle multiple tasks in a fast-paced setting.
• Willing to work shifts and overtime occasionally.
• Good communications skills are preferred.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Job Responsibilities:

• Lead and oversee the QA process, offering guidance and mentorship to the QA team.
• Review and evaluate system specifications to create comprehensive test strategies and plans.
• Execute both manual and automated test cases, analyzing results to ensure the delivery of high-quality products.
• Collaborate closely with the software team to devise effective testing strategies, ensuring a seamless process throughout the software development lifecycle.
• Document and track testing phases and defects, reporting bugs and issues to the development team.
• Provide clear, constructive, and insightful feedback to the software team, fostering strong working relationships.
• Advise teams on potential software improvements, contributing to enhanced design and development.
• Present findings and recommendations to stakeholders, focusing on strategies to improve software performance.
• Work under pressure to meet tight deadlines, ensuring timely delivery of high-quality results.
• Stay up-to-date with emerging technologies and testing tools to continuously enhance QA processes.

Requirements:

• Minimum of 2 years of relevant QA experience.
• Minimum Diploma or higher qualification in a related field.
• Specialized certifications in QA or Software Testing are preferred.
• Strong understanding of the software development process with the ability to quickly grasp business and customer expectations.
• Analytical mindset with excellent problem-solving skills and keen attention to detail.
• Strong communication and consulting skills to effectively convey issues and insights to the software team.
• Solid presentation skills to showcase software improvements.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

Job Responsibilities:

• Lead and oversee the QA process, offering guidance and mentorship to the QA team.
• Review and evaluate system specifications to create comprehensive test strategies and plans.
• Execute both manual and automated test cases, analyzing results to ensure the delivery of high-quality products.
• Collaborate closely with the software team to devise effective testing strategies, ensuring a seamless process throughout the software development lifecycle.
• Document and track testing phases and defects, reporting bugs and issues to the development team.
• Provide clear, constructive, and insightful feedback to the software team, fostering strong working relationships.
• Advise teams on potential software improvements, contributing to enhanced design and development.
• Present findings and recommendations to stakeholders, focusing on strategies to improve software performance.
• Work under pressure to meet tight deadlines, ensuring timely delivery of high-quality results.
• Stay up-to-date with emerging technologies and testing tools to continuously enhance QA processes.

Requirements:

• Minimum of 2 years of relevant QA experience.
• Minimum Diploma or higher qualification in a related field.
• Specialized certifications in QA or Software Testing are preferred.
• Strong understanding of the software development process with the ability to quickly grasp business and customer expectations.
• Analytical mindset with excellent problem-solving skills and keen attention to detail.
• Strong communication and consulting skills to effectively convey issues and insights to the software team.
• Solid presentation skills to showcase software improvements.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

(EAST REGION) - Paya Lebar MRT

- Stable & Well Known construction industry

- Basic + AWS + VB

Responsibilities:

- Managing company’s project performance, from delivering of operational KPI to liaising with internal Project Managers.

- Prepare quarterly reports for review and clearly present the results and status to various stakeholders on a regular basis.

- Key personnel in maintaining, analysing, and forecasting project cost to project team and management.

- Active involvement in budgeting and forecasting processes; administer and review all project forecasts and actual, explain and correct variances on a monthly basis.

- Liaise with external auditors to conduct statutory audit and interim audit.

- Provide insights into project WIP, collections, risks, opportunities and cashflow.

- Actively reviewing and recommending measures for continuous improvement in project management and reporting processes.

- Present updated financial data and actively attends project management meeting to review cost status.

- Review and provide accurate project payment respond and invoices for payment.

-Any ad-hoc duties as and when required.

Requirements:

- From Construction company & experience in handling cost control for project

- Diploma / degree

- Project cost control for Work in Progress (WIP)

- Liaise with PD & PM

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

(EAST REGION) - Paya Lebar MRT

- Stable & Well Known construction industry

- Basic + AWS + VB

Responsibilities:

- Managing company’s project performance, from delivering of operational KPI to liaising with internal Project Managers.

- Prepare quarterly reports for review and clearly present the results and status to various stakeholders on a regular basis.

- Key personnel in maintaining, analysing, and forecasting project cost to project team and management.

- Active involvement in budgeting and forecasting processes; administer and review all project forecasts and actual, explain and correct variances on a monthly basis.

- Liaise with external auditors to conduct statutory audit and interim audit.

- Provide insights into project WIP, collections, risks, opportunities and cashflow.

- Actively reviewing and recommending measures for continuous improvement in project management and reporting processes.

- Present updated financial data and actively attends project management meeting to review cost status.

- Review and provide accurate project payment respond and invoices for payment.

-Any ad-hoc duties as and when required.

Requirements:

- From Construction company & experience in handling cost control for project

- Diploma / degree

- Project cost control for Work in Progress (WIP)

- Liaise with PD & PM

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Mon to Fri 8.30am - 6pm

Position Summary

This position play a critical role in driving compliance and quality programs for Healthcare Transportation & Facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Job Scope

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company’s Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Design & implement robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead & prepare for regular audit programs / random checks / regulatory activities to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and resolve issues via conducting root cause analysis.

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead the validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

12. Depot Support: Provide secondary / backup support to healthcare specialists for market depots.

Requirements :

1. Hold local pharmacist license

2. Have at least five (5) years of relevant experience in warehouse, quality + QMS for pharmaceutical / healthcare industry

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits for regions

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local or Australia’s institute.

7. This position require to communicate with counter part in China

8. Occasionally travel is required to sites and region warehouses.

Competency

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

Mon to Fri 8.30am - 6pm

Position Summary

This position play a critical role in driving compliance and quality programs for Healthcare Transportation & Facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Job Scope

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company’s Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Design & implement robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead & prepare for regular audit programs / random checks / regulatory activities to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and resolve issues via conducting root cause analysis.

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead the validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

12. Depot Support: Provide secondary / backup support to healthcare specialists for market depots.

Requirements :

1. Hold local pharmacist license

2. Have at least five (5) years of relevant experience in warehouse, quality + QMS for pharmaceutical / healthcare industry

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits for regions

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local or Australia’s institute.

7. This position require to communicate with counter part in China

8. Occasionally travel is required to sites and region warehouses.

Competency

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

Location: West

Task Management

• Design and execute a comprehensive strategy for enhancing product quality, ensuring alignment with organizational objectives.
• Lead cross-functional teams to identify and address root causes of quality-related challenges.
• Develop and implement corrective and preventive measures to mitigate future quality concerns.
• Monitor and analyze product quality metrics to assess progress and identify opportunities for improvement.
• Conduct regular audits and evaluations to proactively manage potential quality risks.
• Collaborate with suppliers to verify compliance with quality standards and specifications.
• Work closely with teams in engineering, manufacturing, classification bodies, and suppliers to uphold consistent quality throughout the product lifecycle.
• Stay informed on emerging quality methodologies and tools to enhance processes.
• Review and analyze warranty data to support new product enhancements and continuous improvement initiatives.
• Identify and recommend process and product improvements for enhanced performance.
• Anticipate and address quality risks to prevent potential impact on products or operations.
• Deliver regular updates and detailed reports to key internal stakeholders.
• Maintain high standards of quality while ensuring cost control within allocated budgets.
• Provide product familiarization to customers as needed.
• Occasionally travel to operational areas to assess product performance and gather insights for improvement.

Interpersonal Management

• Communicate effectively by actively listening, providing clear information, and delivering constructive feedback across all organizational levels.
• Build strong, trustworthy relationships by demonstrating respect, authenticity, and dependability.
• Coordinate with shipyard personnel and management to ensure product quality aligns with organizational goals.
• Foster and maintain strategic relationships with partners, customers, suppliers, contractors, and regulatory bodies.
• Negotiate effectively on the company’s behalf, finding practical compromises when needed.
• Establish a robust network of industry suppliers, subcontractors, and key contacts.

Information Management

• Oversee the creation and management of quality improvement documentation and reporting.
• Develop a comprehensive understanding of product specifications and performance standards.
• Stay informed on applicable classification and regulatory requirements that influence product quality.
• Manage warranty claims and provide continuous feedback to enhance shipyard processes and products.

Personal Development

• Pursue ongoing professional growth opportunities.
• Take accountability for achieving individual and team objectives.
• Stay current with industry best practices and monitor competitor activities for strategic insights.

REQUIREMENTS:

• At least 7-8 years of experience in management or supervision related to building, operating, or maintaining marine vessels, with a demonstrated history of success.
• Relevant qualifications in marine or engineering fields are highly preferred.
• Advanced skills in negotiation and resolving disputes.
• Strong commercial awareness and business acumen.
• Exceptional interpersonal and communication abilities.
• Proficient in managing record-keeping systems.
• A well-established network of industry suppliers, subcontractors, and contacts is highly advantageous.
• Dedicated to fostering continuous improvement, prioritizing safety, promoting teamwork, and encouraging transparent communication.

If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV or email to [email protected]

CEI Registration Number: R1985071

EA License Number: 21C0661

Company Registration Number: 201127615M

Job Description:

• Responsible for quality issues arising from production and customer feedback and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections.
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.
• Work closely with other departments to ensure committed schedules are met in a timely and effectively manner.
• Perform any other duties, as assigned.

Requirements:

• Min Diploma or degree in precision engineering, Quality Management or mechanical engineering.
• Minimum 2 to 3 years of working experience in quality engineering or in manufacturing
• Possess excellent leadership & teamwork abilities and organizational skills
• Knowledge and application of quality tools - SPC, PFMEA, Control Plans, CPK, 8D Report, GR&R and Minitab.
• Proficient in understanding engineering drawings with sound knowledge of GD&T (Geometrical Dimensioning & Tolerancing)
• Good knowledge of ISO 9001, 14001 and 13485 quality system
• Mandarin speaker is preferred (to liaise with Mandarin speaking China & Taiwan stakeholders)

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Job Description:

• Responsible for quality issues arising from production and customer feedback and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections.
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.
• Work closely with other departments to ensure committed schedules are met in a timely and effectively manner.
• Perform any other duties, as assigned.

Requirements:

• Min Diploma or degree in precision engineering, Quality Management or mechanical engineering.
• Minimum 2 to 3 years of working experience in quality engineering or in manufacturing
• Possess excellent leadership & teamwork abilities and organizational skills
• Knowledge and application of quality tools - SPC, PFMEA, Control Plans, CPK, 8D Report, GR&R and Minitab.
• Proficient in understanding engineering drawings with sound knowledge of GD&T (Geometrical Dimensioning & Tolerancing)
• Good knowledge of ISO 9001, 14001 and 13485 quality system
• Mandarin speaker is preferred (to liaise with Mandarin speaking China & Taiwan stakeholders)

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

(EAST REGION) - Paya Lebar MRT

- Stable & Well Known construction industry

- Basic + AWS + VB

Responsibilities:

- Managing company’s project performance, from delivering of operational KPI to liaising with internal Project Managers.

- Prepare quarterly reports for review and clearly present the results and status to various stakeholders on a regular basis.

- Key personnel in maintaining, analysing, and forecasting project cost to project team and management.

- Active involvement in budgeting and forecasting processes; administer and review all project forecasts and actual, explain and correct variances on a monthly basis.

- Liaise with external auditors to conduct statutory audit and interim audit.

- Provide insights into project WIP, collections, risks, opportunities and cashflow.

- Actively reviewing and recommending measures for continuous improvement in project management and reporting processes.

- Present updated financial data and actively attends project management meeting to review cost status.

- Review and provide accurate project payment respond and invoices for payment.

-Any ad-hoc duties as and when required.

Requirements:

- From Construction company & experience in handling cost control for project

- Diploma / degree

- Project cost control for Work in Progress (WIP)

- Liaise with PD & PM

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Technical Quality Project Manager is responsible for the efficient set-up, execution, control and management of "Projects" within the agreed contractual scope & company's policy with client's satisfaction as a final result. The TQPM should also be responsible for essential quality assurance and control functions, ensuring projects are executed efficiently while maintaining the highest standards of quality.

RESPONSIBILITIES

Project Management:

• Oversee the supply and delivery of steel, ensuring compliance with specified delivery specifications and conditions, based on customer’s requirements.
• Plan, execute, and oversee projects from start to completion, defining scope and deliverables with senior management.
• Communicate and manage expectations with stakeholders and team members, resolving conflicts as needed.
• Track milestones, manage changes, and prepare contingency plans, ensuring project goals are met.
• Develop reports and proposals, defining success criteria and building essential business relationships.

Quality Management:

• Review and evaluate customer specifications, understand deviations from supplier offers, and ensure familiarity with relevant standards and specifications.
• Coordinate testing, inspections, and standardize QA/QC activities from raw materials to customer delivery.
• Address quality complaints, initiating corrective and preventive actions as necessary.
• Must be willing to travel as required for job execution.

Qualification

Bachelor’s degree or Diploma Material Science and/or Mechanical Engineering

Experience

• Minimum 3 years of relevant work experience
• Strong knowledge of steel grades, welding inspection, and general steel quality issues.

General Skills & Attributes

• Knowledge of and experience in Project Management, international freights, transport and documents
• Technical knowledge and understanding of steel norms, materials and quality standards
• Independent, proactive with strong initiative and positive working attitude
• Ability to prioritize and execute tasks in a high-pressure environment.
• Excellent interpersonal and communication skills, and ability to interact effectively with different stakeholders.
• Strong problem-solving skills and analytical abilities.
• Possess highest standards of integrity and reliability
• Ability to grow in a dynamic working environment
• Competency in other PC skills and software applications

Work Location: Tuas Biomedical Park

Responsibilities:

Responsible for routine operation of QC lab, including but not limited to:

• Manage the routine operation of QC team to ensure the business delivery at the right quality, cost and speed.
• Management several sub-teams like product testing group, and microbial group
• Lead the team to comply with internal requirements in all aspects via end-to-end quality control system oversight
• Ensure all the activities in QC team performed with compliance of cGMP, data integrity and EHS requirement
• Provide support and technical directions for any technical/experiment work required during investigation and definition of corrective and preventive actions
• Oversight of the training, evaluation and management of the staff in QC lab. Coaching, developing and supporting them in reaching their full potential
• Responsible for the GMP audit from regulatory authorities and clients. Reply to audit reports and create CAPAs

Qualifications:

• Bachelor's degree or above in pharmacy, chemistry, biochemistry, analytical chemistry or other related disciplines
• Minimum 7 years of experience in biotech or biopharma industry
• A good understanding of the overall view of the drug development process
• A thorough understanding of the principles and management of cGMP compliance, and a strong quality mindset
• Comprehensive knowledge of FDA, EMA, NMPA, ICH, WHO technical guidelines, and USP, Eur.P, ChP pharmacopoeias
• Comprehensive knowledge of IND/IMPD, NDA, and ANDA filing