Job Descriptions:

• Perform accurate mechanical, physical and visual inspection of components
• Ensure that all parts and components have been tested and measured within specifications/tolerances.
• Initiate Non-Conformance reports as required.
• Communicate with supervisors, mold technicians and other staff to resolve inspection questions.
• Accurately document the results of the inspections and testing on the computer in various programs
• Read and interpret specifications and drawings
• Report any product defects immediately to the technician
• Support the implementation of ISO registration, compliance and audits
• Maintain calibration, first article, internal auditing and training programs
• Direct customer and supplier support for quality matters verification if required

Job Requirements:

• Minimum ITE in engineering or other relevant fields with 3 years of experience
• With relevant Quality Control experience in Plastics Mold preferred
• Practical understanding of precision tooling
• Ability to use basic hand measurement tools (calipers, micrometers, gauge pins, etc.) required
• Experience with visual and touch probe CMMs (Zeiss, Nikon) and Optical comparator desired
• Experience with metrology, GD&T, technical drawing reading
• Fluency in ISO program management and implementation is an asset
• General computer proficiency
• Able to perform Over time
• Able to perform rotating shift

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Supporting Electrical and Automation at Tuas plant.

Responsibilities:

· Responsible for safety personnel and plant.

· Participate directly in site emergency response team.

· Troubleshoot and repair a variety of complex liquid, drying and powder processing, and packaging equipment.

· Back up and maintain PLC, HMI, VSD and other controller program and software version.

· Troubleshoot automation issue by hardware or instrument, program setting/bug and connection issue.

· Knowledge in Alen Bradley PLC, Wonderware SCADA and In Batch system for Troubleshoot automation related in Dry Blending, Filling and Packaging system.

· Evaluation of P&IDs, functional design specification.

· Responsible for performing PM’s and work orders as well as project work.

· Disassembly, diagnosis, repairs and re-assembly of machinery to hygienic and sanitary standards.

· Participate in the development of a Predictive Maintenance program at Tuas.

· Complete all necessary reports and documentation via hardcopy and computer.

· Communicate with Engineering technician on any major process issues as and when required.

· Maintain a clean and sanitary environment in accordance to all safety and GMP policies.

· Be able to use independent judgment and work well within a team concept.

· Interact with internal and external customers in a professional manner.

· Follow all cGMP requirements to ensure proper manufacturing environment.

· Actively participate in the resolution and elimination of downtime issues.

· Assist in the creation of SOP’s, checklist, and work instructions.

· Complete all necessary transactions, reports and documentation with accuracy and timeliness.

· Maintain a clean and sanitary environment to 5S or similar standard.

· Adhere to the Tuas Code of Conduct.

· Provide technical assistance and support regarding all projects, installations, and repairs.

· Maintain smooth communication with different levels of departments and peers.

· Upgrade hardware and software for improved process control.

Requirements:

· Nitec/Higher Nitec/Diploma in Electrical & Electronics / Mechatronics equivalent qualifications.

· At least 3 years of industrial automation & maintenance experience.

· Previous experience in a food or pharma manufacturing environment is preferred with experience and knowledge in Automation and predictive and preventative maintenance technologies.

RESPONSIBIITIES & DUTIES

* To design, write & troubleshoot machine electrical & control systems for factory automation, smart-factory technologies as well as AI platform.

*To design and perform detailed designing for machine electrical control systems for Factory Automation, Smart-Factory Technologies, Machine & Equipment Manufacturing.

*To write Programmable Logic Control (PLC) program for automatic machine control & processes. Preferably, with Industrial PC (IPC) programming experiences too.

* To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new projects proposal and confirmed projects.

*To lead the in-house electrical staff and/or the company’s appointed electrical vendors on the respective machine control and electrical systems and operations of the projects.

*To lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company and/or customer site.

*To spearhead meetings and review with the design team and the customers on control system requirements and specification.

SMART-FACTORY TECHNOLOGIES & SOLUTIONS

*To team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects.

*To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

*To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.

PROGRAMMING SKILLS & REQUIREMENTS

* PLC based system: ladder, functional block, structure text

* PC based system: C++, VB (visual basic)

Responsibilities:

• Perform quality control checks and generate QC/Halal reports for incoming and outgoing products to ensure that they meet quality and safety standards in accordance to SFA and MUIS regulations

• Perform sensory evaluation for incoming raw materials to ensure consistent quality and for product improvement

• Conduct quality control and Halal inspection for customer feedback

• Provide technical and quality related assistance to other departments, assist in marketing department’s recipe, videos and photo shoot when required

• Perform regular internal and external product quality control and monitor their quality so as to provide timely feedback to category/supplier for improvement

• Compile/archive QC/Halal report related documents

• Assist to maintain, source and purchase QC equipment and consumables when required

• Assist in product development or product improvement sensory evaluation preparations when required

• Assist sales or other departments with product specification, certification and quality related document requests

• Assist to liase with Halal/FSSC/ISO Authority on inspection and renewal of Related Certification.

• Assist on planning and executing Audit schedules

Requirements:

• Minimum Diploma in Food Science, Food Technology or related disciplines

• At least 2 years of relevant working experience in the food industry QC/R&D environment and familiar with ISO/FSSC 22,000 and Halal certifications

• Possess good interpersonal skills, self-motivated & methodical

Independent & a team player

• Proficient in Microsoft Office (Word, Excel & PowerPoint)

• Possess basic cooking skills

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.

• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Job Descriptions

• Management of cargo flow/space control by trade verticals with internal stakeholders.
• Coordination of cargo booking with internal sales teams and reporting principals.
• Assist supervisor in preparing reports for the responsible trade.
• Assist in any other ad-hoc assignments when required.

Job Requirements

• Candidate must possess at least a Diploma / Degree in Shipping-related, Maritime or Logistics disciplines.
• Minimum 2 years of relevant working experience in similar scope or logistics industry field is preferred.
• Proficiency in MS Excel (Pivot table & V-lookup), MS Words & Power Point applications.
• Ability to prepare reports and present to trade verticals.
• Possess interpersonal skills with high level of integrity and professionalism.
• Possess strong negotiation and analytical skills.
• A team player who can work independently.
• Self-motivated individual who is result-oriented and resilient in a fast-paced environment.

*Only shortlisted candidate will be notified.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Objectives of the position:

This role involves Customer Quality Support for LAP’s product distribution, addressing customer feedback and product quality requirements/issues. The person in this position will be responsible for handling customer feedback or requirements, such as complaints, test data, and other technical information as requested. This includes necessary communication with all stakeholders (Customer, Supplier, Customer Service, Production Planning, Supplier Management, Logistics).

Knowledge in cable testing or Electrical & Electronic (E&E) product testing, along with an understanding of technical specifications, will be required to comprehend customer complaints (both technical and logistical) and provide appropriate advice for resolution.

Key Responsibilities:

Manage Customer Complaint Processes

• Acknowledge the complaint
• Update the complaint in SAP & Customer complaint log
• Track the complaint & close the complaint once actions are completed
• Summarize complaints for monthly reporting (LOS & Q-reporting)
• Properly handle customers' needs by providing accurate and timely information on inquiries related to cable standards, test reports and complaint handling

Track Supplier Quality

• Conduct incoming inspections when required or prompted by customer complaints
• Update results in the SAP system and release inspected lots according to the defined usage decision
• Generate Supplier Corrective Action Requests (CAR) and track corrective actions by liaising with the supplier

Compliance with Standards

• Familiarize with and comply with international cable testing standards and procedures
• Contribute to achieving company and department KPIs through due diligence, duty of care, and personal accountability for quality assurance in all tasks

Liase with Stakeholders

• Effectively close customer complaints by liaising with relevant stakeholders

Maintain Records

• Maintain records in SAP and other relevant records

Operate Laboratory Test Equipment

• Operate laboratory test equipment when required for the validation of complaints

Assist with Customer Technical Enquiries

• Assist with product test reports, RoHS, REACH, and CE inquiries

General Assistance

• Assist in other day-to-day activities related to the QA department as assigned by your superior

Skills & Qualification:

• Min. Diploma in Engineering (Electronics / Electrical) or equivalent
• Min. 1 year of experience in electrical / electronic product testing and qualification
• Knowledge in ISO 9001: 2015 QMS standard will be added advantage
• To be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).
• Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage
• Good written and communication skills in English
• Good customer handling skills and able to communicate to all levels in the organization
• Proficient in Microsoft Words, Excel & Power point
• Addresses present issues immediately and independently
• Possess self-confident and willing to share opinions and expertise in discussions
• Anticipate potential problems and takes action to avoid crisis
• Provide support to colleague in the Department and work as a team to achieve Department goals and targets

1. Able to read and understand technical drawings.
2. Must able to do Mitutoyo CMM Programming and Operation.
3. Ensure incoming materials, in-process production and finished products meet by confirm specifications requirements; conducting visual and measurement tests.
4. Follow up corrective actions in production
5. Documents inspection results by completing reports and logs; inputting data into quality database.
6. Able to perform final inspection report for finished products and prepare relevant documents to customer.
7. Evaluate and analyze customers rejections, implement and feedback corrective action.

• At least 5 years' experience in Quality Control
• Basic Computer knowledge to prepare Quality Documents Report
• Able to speak, write and read simple English
• Able to work independently with minimum supervision

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Responsibilities :

• Familiar with evaluation of tender, preparation of tender & quotation
• Responsible for taking off measurement & monthly progress claim
• Carry out Quantity take-off for tendering of projects
• Ability to source for supplies and sub-contractors for quotation for tendering
• Evaluation and certificate of sub-contractors' progress payments
• Project administration and documentation include preparation of interim
• Carry out miscellaneous tasks required as part of ISO Quality Management System
• Review and advise the Project Manager on the cost impact for variation of project specification
• Other quantity surveyor duties as assigned

Requirements :

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Quantity Survey or equivalent.
• At least 5Year(s) of working experience in the related field is required for this position.
• Preferably Senior Executive specialized in Quantity Surveying or equivalent.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

As an Associate Quality Engineer to be ensuring effective quality control, continuous improvement and in line with Zero Defects Philosophy to the end-to-end value chain.

Your main responsibilities:

• Benchmark quality control in production, to develop internal work processes and improvement handling to ensure quality assurance.
• Analyze process weakness and Quality performance data and work with internal departments (including external suppliers) on quality improvement plans.
• Create, review and update inspection SOPs, inspection checklist, control plan or special inspection instructions when needed.
• Coordinate with upstream and downstream process department/teams on quality related issues.
• Provide timely response to customers complaints including root cause analysis, facilitate containment, initiate improvements etc.
• Ensure that the department is readily prepared for internal and external quality audits.
• Initiate quality checks when needed and resolve system integrity wherever possible.
• Handle product recalls/delivery stops/rework processes to be taken place in the factory premises whenever the need arises in a timely and satisfactory manner.
• Administrator for documents relating to group standards and ensure timely implementation and awareness of relevant standards.
• Monitoring of engineering change management to ensure proper process handling from both internal and external suppliers.
• Organizing calibration for measuring tools
• To review the product warranty from the FAS and promote the improvement with the team.
• Ad-hoc duties where required.

Your Background:

• Degree/Diploma in Engineering or related field
• Minimum 2 years of working experience

Do you want to learn more?

This position is based in Singapore. If this interests you, please upload your CV/resume and cover letter today via our Careers portal.

We look forward to hearing from you.

Role: Quality Engineer (QE)

Position Overview:

The Quality Engineer is responsible for ensuring the quality of construction materials, processes, and workmanship throughout a project. This role involves QA/QC document developing; monitoring site quality control activities; monitoring compliance with standards; implementing quality assurance procedures to deliver projects that meet contract, client specifications, international standards and Singapore regulatory requirements. This role is essential to delivering high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in developing QA procedures as per the required by project Quality Assurance Plan.

2. Develop and/or review QC report templates, checklists as per ITPs.

3. Take part in developing quality training materials as per project quality requirements, and technical specifications. Conduct quality training to subcontractors’ QC inspectors and site supervisors.

4. Conduct regular checks for site QC activities and QC report completion.

5. Take part in project internal quality audits in accordance with project audit procedure to ensure compliance with company ISO 9001 QMS, Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

6. Take part in project external quality audits to subcontractors in accordance with project audit procedure to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

7. Regularly monitor project KPIs, ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, at the meantime, report to QAQC manager.

8. Coordinate with discipline engineers, subcontractors, the client, third party inspectors to ensure project quality requirements are met.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime may be required, and working at a fast pace.

Requirements for the role:

Ø Degree or Advanced Diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant QE experience in Singapore.

Ø Experience in quality assurance (QA) and QA document developing.

Ø Experience in site quality control (QC) related inspection and tests.

Ø Experience in defects rectifications.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent problem-solving and analytical skills.

Ø Strong communication and interpersonal skills.

Ø Certification in Quality Management (e.g., ISO 9001) is a plus.

Summary of Job Scope:

Responsible for technical enhancement of quality control and analytical development in QC Laboratory functions.

• Work allocation and arrangement for daily QC routine work
• Finish Product Quality Control
• Checking Report of "In-Process control of Tablet"
• In process quality control of intermediates (IPQC)
• Review and evaluation of Analyst test report and data to ensure test result is up-to date and accurate.
• Review and ensure QC Records and BMR are up-to-date, complete and accurate.
• Supervision of quality control check on raw material dispensing
• Management, Monitering and testing on sample.
• Monitor retained samples and waste of tested sample of intermediates and finished products.
• Environment monitoring and recording for retention sample room.
• Supervision and training of laboratory technicians and laboratory assistant and chemist in carrying out their duties.
• Responsibe to revise of SOP for IPQC and FPQC and relevant section.
• Verify and approve test result in absence of QC Manager.
• Calibration of laboratory equipment and apparatus.
• Ensure Good Laboratory Practice (GLP) & Lab Safety.
• Optimization of usage of laboratory equipment.
• Support in the investigation and management of product complaints.
• Participate in process and cleaning validation.

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery. Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Job Responsibilities and Duties

• Perform Environmental Control Officer duties in Construction site
• Conduct regular inspection to ensure earth control measure/ noise control are in place
• Liaise with relevant authorities like MOM, PUB and NEA
• Liaise with in-house consultant
• Familiar with local law and regulations

Requirements (Qualification & Experience)

• Must be a registered Environmental Control Officer with NEA
• Willing to work in West region of Singapore
• Minimum 3 years of relevant working experience in a construction firm

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee