Validation and Quality Assurance (VQA Engineer)

Responsibilities:

• Conduct technical assessments for new suppliers and periodic assessments for key existing suppliers. Jointly develop supplier technical roadmap with supplier chain management.
• Communicate with suppliers regularly to develop quality improvement plans and foster an environment that facilitates continual improvement and compliance to AEM supplier guideline, requirements and applicable standards.
• Review engineering and manufacturing specifications to validate material defects for return to supplier and ensure timely replacement by supplier.
• Apply 8D and other applicable quality tools with suppliers to ensure implementation of permanent corrective actions and no repeats.
• Contact suppliers and liaise between engineering/manufacturing to reach common acceptance of path forward for material issues that are not pure resultant of supplier fault.
• Conduct supplier quality control audits on a regular basis to ensure suppliers and their supplies remain in compliance with their internal production & quality control process and management systems and standards as well as AEM supplier guideline, requirements and applicable standards.
• Maintain a supplier database and their performance evaluation/scoring to facilitate supply chain management.
• Update internal procedures and work instructions for changes and conduct procedural trainings as part of internal continuous process improvement.
• Provide guidance to Incoming quality inspectors on inspection process and methods.

Requirement:

• Diploma/Degree in Mechanical Engineering/Mechatronics/Electrical.
• At least 2 years in the area of Supplier Quality
• Familiar with mechanical and materials used in equipment assembly
• Knowledge of Problem Solving skills and familiar with Quality tools such as 8D, Pareto
• Analysis, 5 Whys, FMEA, DOE etc.
• Good communication skills
• Independent, takes initiative and able to work with minimum supervision
• Able to work with diverse cultures

Design Quality Engineer, Quality Assurance

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Create and Execute Test plans for qualifying new designs to the intended customer use case
• Develop Accelerated Life Testing/Stress for high value components
• Propose, procure and setup test equipment for component qualification test
• Conduct statistical data analysis for test and reliability data and report compilation
• Assess component quality for working with Supplier. Perform Root Cause Analysis by coordinating with Engineering team
• Skills Knowledge of ISO 9000 Quality Management System (Preferable)
• Good Understanding of Quality and Reliability engineering
• Ensure all reported defects from Qualification tests are logged & follow up with owner till corrective action completion
• To support product architectural and core execution

RELATED EXPERIENCE AND EDUCATIONAL REQUIREMENTS

Minimum requirements

• Minimum Bachelor’s Degree in Electrical/Electronics/Instrumentation/Mechanical Engineering
• At least 3 years’ working experience in a semiconductor environment and leadership role
• Strong knowledge in qualification test plan development, test instrumentation, problem solving
• Skills Knowledge of ISO 9000 Quality Management Systems preferred.
• Good background in statistical analysis and Reliability preferred.
• Self-motivated individual who is action/result oriented, independent, flexible, with a passion for developing technical excellence products.
• Working knowledge of Minitab and experienced in MS Office packages (Word, Excel, PowerPoint, Outlook)
• Good interpersonal and communication skills

Meranti Power Pte. Ltd., a fully owned subsidiary of Energy Market Authority, is establishing a maintenance team to maintain two open cycle gas turbines of our power generation station.

We are inviting applicants for the positions of Technical Officer (Control & Instrumentation) who shall report to the Senior Engineer / Engineer (Control & Instrumentation Maintenance) and be responsible for supporting him in the maintenance of C&I systems of the power station/plants. The Technical Officer shall support C&I team in the following:

Responsibilities:

• Responsible for proper maintenance of gas turbine, generator and auxiliary systems as assigned by Head or Engineers in-charge.
• Perform troubleshooting, predictive, preventive and corrective maintenance to ensure plant equipment and systems run smoothly and efficiently
• Identify, plan and initiate required actions to maintain the power plants for long term reliability and efficient generation output.
• Prepare technical specifications for equipment services, contract labour and ad-hoc maintenance services. Supervise and report performance of contractors to ensure good quality and progress of maintenance works, as well as full compliance with contract specifications.
• Liaise, supervise, and coordinate with contractors and vendors on projects, maintenance, repair, shut down, and overhaul works
• Support operation and maintenance engineers in investigation, analyse and determine the root cause of plant defects and outages.
• Maintain and control all records as required.
• Assist in the preparation, certification and review of all management systems, including ISO 9001, ISO 14001, ISO 18001, ISO 27001, ISO 50001 annually and provide support to the auditing parties wherever necessary, including internal & external auditors, to rectify non compliances and/or to follow up on improvement items identified during audit.
• Maintain and enhance the Control System Network and CyberSecurity of OT system.
• Support engineers in managing maintenance contracts and inspections, testing and commissioning of new equipment.
• Carry out routine and corrective maintenance programme of C&I in-charged equipment.
• Inspection and acceptance of purchased materials and contract spares.
• Reporting unsafe conditions/near miss incidents for rectification
• Monitor ad-hoc plant projects/tasks to ensure on time delivery
• Perform work orders allocated by Department Heads and/or Engineers

Requirements:

• Education in Electronics & Electrical Engineering or related discipline
• Minimum 2 years’ C&I maintenance experience in a power plant or related industry
• Willing to work overtime
• Self-driven with good working attitude and possess keen learning disposition
• Proven attendance record and works well in a team
• Work location is in Jurong Island (Transport to and from Jurong East MRT are provided)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Job Description:

• To review, develop, implement, monitor and evaluate key performance indicators in alignment with Department of Nursing's set targets.
• Prepare and conduct audits to improve the standards of nursing image and care quality.
• Coordinate and faciliatate root cause analysis sessions for incidents related to Nursing Department.
• Work closely with NDNQI coordinator and indicators' owners to facilitate the collection and submission of NDNQI data.
• Educate nurses about CGH Nursing's Professional Practice Model, the concept of shared governance and Nursing Council.
• Maintain a continuous improvement mind-set to seek evidence-based practices through research.

Job Requirements:

• Possess a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Nursing or equivalent.
• Advanced diploma / post-basic certificate in any discipline for the Senior Staff Nurse position
• Registered with the Singapore Nursing Board

Only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

The job holder is to work with PI and the research team to conduct research characterizing VOCs in urban environment.

Job Requirements

One or more of (but not limited to) the following:

• Well versed in operating PTR-TOFMS, maintenance, troubleshooting and data analyses
• Experience in handling big data via R, Python, Matlab, etc.
• Experience in laboratory (offline) VOC speciation and quantification
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

Knowladge of admin and accounts preferred. Computer literate , candidate should be self driven and able to work independently

JOB SUMMARY

Determines appropriate Inspection processes and directs IQC personnel, where applicable, in executing day to day activities. Leads containment and resolution of supplier quality issues with the manufacturers and communicate status on non-conforming parts/suppliers across all programs. Evaluates supplier performance, drives supplier improvements and corrective actions through the SCAR process.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Defines, develops and implements Supply base strategies that drive improvements is supplier selection, development, and leverage across customer programs for quality improvements and cost savings.

Provides regular updates to Quality Engineering Manager on the execution of the strategy.

Provides support for NPI activities by participation in the AQP process as required

Ensures that all production critical supplier issues are resolved in a timely manner, and corrective actions are implemented.

Defines and develops the appropriate Inspection Plans and Inspection Methods, directs Receiving Inspection Auditors

Defines and develops the inspection processes via inspection aids and instruction guidelines.

Ensuring ongoing site supplier evaluation is performed. This would be achieved by using site information collected from Receiving Inspection, MRB, Customer Returns, SCAR database and by liaison efforts with customer work cells. Performance will be reported internally, to the supplier, and to the customer where applicable.

Monitors and drives PPM issues with the supply base in addition to helping them achieve “Dock to Stock” certified with Jabil (in accordance to the vendor performance system).

Reviews all supplier discrepancies. Coordinates and tracks the corrective/preventative action effort.

Proactively communicate information or issues that may impact the product costs or manufacturability to all affected departments.

Provides insight and assistance of implementing and maintaining Process Improvement and Optimization concentrating on proactive methodologies with the supply base.

Leads SCAR – Supplier Corrective/Preventive Action process for problem resolution and continuous improvement, including critical analysis of supplier DOE, CPK, Gauge R&R studies

Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

Comply and follow all procedures within the company security policy.

Site RoHS subject Matter Expert

May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS

KNOWLEDGE REQUIREMENTS

Strong electro / mechanical background desired; knowledge of plastic injection molding & tooling, metal stampings & tooling, metal fabrication, machining and various electrical components, connectors, PCB & PCBA, cable assembly, full assembly integration etc.

Able to read and interpret mechanical drawings (6 sigma training desired).

Good skills in MS excel, word, power point, visio, and project.

Understanding of the quality system, medical and commercial regulatory requirements and how they relate to the business.

Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

EDUCATION & EXPERIENCE REQUIREMENTS

Bachelor’s degree required, Bachelor’s degree in Engineering preferred.

3-5 years of experience in Quality or Manufacturing Engineering

Or an equivalent combination of education, training or experience.

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

• Position : Quality Engineer (Aerospace) - Up to $4,000 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,000 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• To create comprehensive, effective, efficient, and viable manufacturing planning cards (job cards) on an MRP/ERP system based on given mechanical drawings, specifications, instructions, and prevalent internal standards.
• To create comprehensive and viable cost estimates based on given mechanical drawings, specifications, instructions, and prevalent internal standards.
• To manage and ensure the efficient throughput of assigned jobs based on given targets.
• Any other ad-hoc duties required

Requirements:

• Minimum Diploma in Engineering or equivalent
• Minimum 3 years experience in inspection of fabrication and machining parts mechanical works of a similar nature.
• Experience in CMM programming
• Able to read and interpret the GD&T print of assembly, machining and fabrication drawings, P&ID
• Proficient in Visual Basic, Micro and Microsoft Office
• Experience in a manufacturing / engineering / machining and inspection techniques is essential
• Qualification in welding Inspector or welding NDT will be a plus
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Senior Consulting Manager (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position: Quality Engineer (ISO9000/14000-Mechanical Engineer)
• Location: Tuas Crescent - Company transport provided (Pick up point at Jurong East and Marsiling MRT)
• Working hours: 5 days, Monday to Friday (8.30am- 5.00pm)
• Salary (commensurate on experience): Up to $4800 + 14 days Annual Leave + Variable Bonus
• Duration: Permanent
• Industry: Wholesale of diesel-powered generators

Main responsibilities:

• Work closely with the Engineering and Production team to develop incoming quality, in-process Quality and Outgoing Quality requirements
• Responsible for all Quality plans of all products to meet customers specifications
• Work with relevant agencies to adhere to certification requirements when required Work with management to establish/maintain company's QMS and is Management Representative (MR) of company
• Work with Procurement/Purchasing to ensure that contractors/suppliers quote/supply items that meet customer's specification.
• Working out costing of products when required by management
• Responsible for all equipment calibration/maintenance program within the company
• Complete other tasks assigned by management

Requirements:

• Min 1 year relevant experience
• Diploma in Engineering/Degree in Mechanical/ Marine Engineering or equivalent
• Experience in handling project Audit and liaise with internal & external auditor
• Familiar with ISO9000/14000
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates in view of business communications

Email to [email protected]

Do visit Search Personnel Pte Ltd for more job listings.

***We DO NOT charge our candidates any referral fee nor bind them with any contract.***

Joie Chang

Deputy Consulting Director (APAC)

Reg no.: R2090601 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

GetGo is Singapore’s largest and fastest-growing carsharing platform that enables everyone with the freedom to drive without the burden of ownership. Our vision is to be APAC’s #1 carsharing platform as we seek to create a mobility ecosystem that's shared and sustainable for all.

You will be part of the GetGo Fleet Quality Team to oversee and manage GetGo’s fleet, partner workshops, and insurance-related matters. You will collaborate closely with our affiliated workshops and insurance providers to oversee fleet quality and delivery schedules, ensuring the delivery of the highest fleet quality to our users. You will also support the Trust & Safety (User Trust) team with quotations on accidents and damages.

Day to Day Activities

• Assess damages on GetGo vehicles and work closely with internal teams for any subsequent actions to be taken
• Manage and follow-up with affiliated workshops to monitor and ensure smooth delivery of GetGo vehicles in a timely manner
• Collaborate with various teams including but not limited to our Fleet Operations, Trust & Safety and Finance teams for issues pertaining to Fleet Quality
• Liaise with insurers pertaining to insurance matters such as accident reporting, investigation, and repudiation issues
• Generate quotations for accidents and damages to our fleet based on photographs provided by customers and our internal teams

Who We Are Looking For

• Minimum two (2) years of experience in either workshop or motor insurance environment within the automotive industry
• Ability to assess and prepare estimated accident and damage repair quotations preferred
• Excellent communication and interpersonal skills
• Familiar and comfortable working with MS Excel/Google Sheets

Why You Should Join Us

• Be part of the fastest growing and largest carsharing technology company in Singapore
• Achieve meaningful objectives as part of a mission-driven and values-based organisation
• An opportunity to experience an open, inclusive, and culture-first work environment

Strong personal alignment with our GetGo Values:

• Driven by Purpose
• Stay Curious and Humble
• Collaborate with Empathy
• Make it Better
• Get It Going!

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Supplier Quality Management Engineer to be part of our Quality & Reliability Engineering department to ensure high quality of incoming materials going into the fab with early detection gating methodology of abnormal materials.

What you will be working on:

• Work with Suppliers/Subcontractors to ensure high quality of incoming materials going into the fab with early detection gating methodology of abnormal materials; Collaborate with Suppliers/Subcontractors for Quality Control Development & Improvement Programs; Work with Stakeholders on New Suppliers and Materials Evaluation.
• Execute Certificate of Analysis (COA) & Statistical Process Control (SPC) system for quality control of incoming materials.
• Chair Material Review Board (MRB) meetings with risk-based assessment and material disposition.
• Conduct Supplier Audits and follow-through till closure of Supplier Audit CARs.
• Lead and co-work with Material Owner for Supplier/Subcontractor Complaint till 8D closure.
• Manage change request from/to Suppliers/Subcontractors.
• Work with Purchasing & Material Owner for New Materials & Suppliers Evaluation.
• Maintain Supplier Quality Scorecard to objectively measure the quality performance of Suppliers/Subcontractors and drive for quality gap closures.
• Use Data Analytics to identify opportunities of quality improvements on incoming materials.
• Collaborate with Suppliers/Subcontractors for Quality Control Development and Improvement Programs.
• Drive Suppliers for Ship to Control (STN) or Ship to Notification (STN) requirements.

More About You:

• Degree in Engineering
• Preferably 1-3 years relevant wafer fab experience.
• Candidates with no experience will be considered for junior role, training will be provided
• Candidates with relevant experiences in semiconductor/ automotive industry or Qualified 1st or 2nd party Auditor in VDA6.3, IATF16949 or ISO9001 quality standards will have competitive advantage in this application
• Understanding of 5 Quality Core Tools (APQP, PPAP, FMEA, SPC, MSA)
• Data Analytics skills using Tableau & Minitab or equivalent are crucial for this role
• Strong Problem Solving Skills
• Good communication & presentation skills
• Open to travel to supplier sites during work (15% to 20%)

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.Maintain and improve capacity planning methodologies to ensure accuracy

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to [email protected].

JOB SUMMARY

Has responsibility to lead , plan and supervise the functional activities that are related for the hubbing/warehousing; shipping and related support functions for specified customers and/or programs

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Lead ; direct and supervise functional scope and activities in order to ensure its effectiveness and efficiency operationally. Please refer below for more granular details of essential/key duties and R&R

· Manage & communicate efficiencies and metrics of stakeholders specific operations in sufficient detail as to allow adequate control, communication and improvement opportunities.

· Ensures that all internal and external quality requirements are being met and institutes corrective action wherever necessary.

· Lead & drive in the development and support of quality, cost, and schedule conformance targets for stakeholders specific operations and communication

· Manage the publication and dissemination of all stakeholders required documentation.

· May perform other duties and responsibilities as assigned.

JOB QUALIFICATIONS : KNOWLEDGE REQUIREMENTS

· Strong knowledge of Warehousing/Contract Logistics operations and industry.

· Strong knowledge of global and regional logistics operations and industry.

· Knowledge of Trade Compliance elements will be an added advantage; including knowledge of international direct and indirect taxes as well as global customs regimes.

· Strong proficiency in determining warehousing/hubbing & logistics requirements to enable company’s business goals and objectives with ability to devise and implement strategy to achieve targets.

· Strong financial and analytical ability. Proficiency in managing business analytics to determine optimum commercial footprint.

· Proven track record of successful change management accomplishments, implementing and management continuous productivity and cost reduction programs.

· Strong and convincing communication skills.

· Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.

EDUCATION & EXPERIENCE REQUIREMENTS

· Bachelor's degree in Business, Materials or Supply Chain Management.

· At least 4 years experience in related area.

· Or a combination of education, experience and/or training.

Essential/Key Duties and R&R Addendum:

Hub/Warehousing/ContractLogistics:

· Lead defined solutions from an inventory perspective to ensure correct execution of operational level

· Recommend changes that will eliminate or greatly reduce inaccuracies from reoccurring.

· Ensure the root cause of discrepancies and other related inventory errors are being identified and resolved

· Drive process improvements to reduce costs

· Initiate, define and review documentation of processes and relevant projects.

· Support any audits requested by customer

· Ensure DN creation / PGR / PGI activities for Principal / Principal Site transactions for Hub sales / hub returns / part rework / sorting conversions is completed on time and will help out when necessary.

· Drive process to set up Hub vendors in SAP by working with cross functional team

· For future EDI development, understanding functional SAP process flows and facilitate UAT(User Acceptance Testing), drive IT development for process and / or documentation

· Review 3PL yearly performance KPIs/QBRs

· Ensures the warehouse billing invoices are correctly validated

· Review and approve month end cost accruals prepared by direct report to finance for closing

Logistics/Freighting:

· Lead defined solutions from a logistics/freighting/transportationperspective to ensure correct execution of operational level

· Recommend changes that will eliminate or greatly reduce inefficiencies and/or inaccuracies from reoccurring.

· Drive process improvements to reduce costs

· Support any audits requested by customer

· Review LSP yearly performance KPIs/QBRs

· Ensures the logistics/freight & brokerage billing invoices are correctly validated

· Review and approve month end cost accruals prepared by direct report to finance for closing

General:

· Responsible in direct report’s yearly appraisal. Responsible in determining yearly performance KPI of direct report

Knowledge / Experience Requirements:

· Warehouse management - Manage 3PL KPIs performance (inventory counts, commit shipment, etc..) and cost

· Freight forwarding (inbound/outbound) - Understand the market players and competitive landscape to drive the best route solution on different condition (air vs sea), and consistently drive cost reduction opportunity for the business.

· Custom regulations - COO, knowledge about different countries custom regulations.

SUMMARY

Represent the quality function of technical support, in conjunction with other internal support groups, regarding issues affecting manufacturing.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

· Develop and maintain QA plans and process routings, which reflect intended/actual activities.

· Provide support for all quoting activities by participation in initial process design, development, and implementation phases.

· Evaluate and support inspection processes via inspection aids and instruction guidelines.

· Support all training programs by development and implementation of specialized training sessions for all applicable functions.

· Conduct periodic review and maintenance of all documentation files; develop appropriate systems for document storage and access.

· Review all supplier or customer discrepancies. Coordinate and track the corrective/preventative action effort.

· Provide trend analysis of defects occurring at the customer, supplier and internally.

· Participate in the vendor survey activities as applicable.

· Drive proactive participation with suppliers and (when possible) aid in their process improvement efforts.

· Interface with all departments as applied to the Policies and Procedures with special regard to ISO, EN4600 and GMP documentation.

· Monitor departmental activities and provide technical and logistical guidance/support for the quality engineering staff as applicable.

· Interface and provide technical support on quality issues with the customer as needed.

· Support and focus corrective action efforts and utilizing the SPC data and corrective action tracking package and create and implement any meetings, procedures, or team-building concepts as necessary as part of the corrective/preventative effort.

· Serve as liaison between Jabil Circuit and suppliers or customers on quality related issues.

· Improve technical support for the quality organization.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelor's degree required and two years related experience; or equivalent combination of education and experience.

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Job Responsibilities

· Supports the Singapore Financial Controller and will be the main finance business partner to the assigned operational Business Units.

· Lead Business Line budgeting and forecasting processes for the Business Units assigned to the Business Controller.

· Lead the month-end financial closing process for internal management reporting.

· Ensure accuracy & timely submission of order books (work performed in the month) maintained by Business Units to determine accounting accruals (revenue/costing) for the proper accounting cut-off during the month-end closing.

· Advise and implement process improvement measures for Business Units on resource allocation, invoicing process, revenue recognition, expense booking and other management reporting related issues.

· Collaborate with sales team on new tenders or contracts to ensure financial compliance with the company’s business models.

· Partner closely with Business Line Management, operational teams, and Shared Service Center team to develop and implement strategies and initiatives that lead to continuous improvement from a financial and business control aspect.

· Develop and maintain costing models to ensure that cost drivers are understood by sales team/Business Line Management and ensure that activities are priced to recover their true cost. Review and refine pricing models/tools

· Regularly review and improve accounting policies and controls, for operations team to follow, to ensure that proper month-end closing figures are posted.

· Manage audit queries from Internal and External Auditors regarding operational transactions.

· Assist the Financial Controller with preparing materials for the Monthly Business Review Meetings, as well as other related meetings

Job Requirements

· Diploma/Degree in Business, Accounting, or Finance or have an Accomplished Finance/Accounting Professional qualification (eg. ACCA)

· Having accounting knowledge is a requirement; however, further on-the job training will be provided.

· 0-5 years of relevant work experience in finance/accounting, controlling, taxation or audit. More experienced candidates will be considered as well.

· Fresh degree/diploma holders are welcome to apply if they are accounting trained.

· Having a hands-on mindset and being comfortable with cross-department business interactions.

· Moderate proficiency with Microsoft Excel (eg. VLOOKUP, moderate data cleansing, pivot tables)

· Familiar with Microsoft applications such as PowerPoint, Word, Outlook

· Prior experience with SAP BPC, Oracle accounting software, VBA and Power BI would be an advantage, but not a requirement.

· Having good business report writing skills in English.

· Comfortable with accounting/financial numbers.

· Ability to work well under pressure to meet monthly deadlines and be a strong team-player.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer to be part of our Facilities Department diverse team of talent. To provide facilities support pertaining to Facilities Monitoring and Control Systems (FMCS) and other miscellaneous electrical & electronic facilities systems to wafer fabrication so as to ensure continuous supply of utilities & related facilities at the required performance level or specifications.

What you will be working on:

• Formulate and implement operating procedures and preventive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times. Systems include CCTV, card access system, FMCS, Life safety system, instruments for FMCS, Siemens / Rockwell PLC & SCADA control system and other control systems.
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time.
• Monitor & review system performance and capacity usage as well as provide regular reports, so as to recommend & implement improvement/enhancement projects.
• Track spares & consumable usage. Ensure adequate provision for day to day operation.
• Ensure plant histories, drawings, data and other appropriate documentations are being generated & properly filed for future reference & review.
• Evaluate & recommend appropriate spares, consumables & other resources necessary for the day-to-day operation of the systems.
• Ensure that all quality expectations are up held to meet better than expected customer request.
• Create and innovate new process for continuous improvement to current processes to attain best in class quality and cost.

More about you:

• Master / Degree in Science or Engineering in Electrical, Electronic, Control Engineering or equivalent
• Basic engineering knowledge, which may include knowledge in industrial automation & industrial control systems
• 5 - 10 years working experience in semiconductor environment, pharmaceutical or petrochemical industry preferred.
• PLC & SCADA Programming
• Good problem-solving skills and strong technical knowledges
• Good team player with strong communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Overall Job Purpose:

To independently define critical deliverables, plan, manage, control, approve and deliver engineering deliverables required for the assigned project effectively and efficiently according to specified technical requirements, timelines and budget, manage project resources and independently deal with and resolve all I&C related technical issues of the project, and provide guidance to the assigned team.

Responsibilities:

• Understands the specific technical requirements of the assigned project (may include Construction, Commissioning and Offshore assignment) and Industry Standard, Classification Society and Regulatory requirements.
• Plans and directs the running of application software such as AVEVA Instrumentation, reviews and approves the deliverables prepared by Engineers and reviewed by Senior Engineers.
• Directs Engineers and Senior Engineers in the team to develop engineering specifications (drawings, data sheets, etc) specific to the assigned project, reviews them and validates with the Project Manager and client before incorporating them in the RFQs.
• Independently evaluates all the bids received for I&C packages from various suppliers, performs a technical bid evaluation process, involves in cost estimation, ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications and gives assessment to the Buyer who will follow up in the tender evaluation, price negotiation and award process.
• Reviews/checks draft drawings and documents from team members and ensures the timely provision of accurate documents and specifications to the successful vendors to enable the latter to execute their work and deliverables.
• Independently manages/develops solutions to technical/engineering and related problems by analyzing the issues/data, interpreting the analysis and evaluating various options/measures using experience, precedents and professional references.
• Reports any deviation from MODEC standard specification and practices, concept change to Department manager and seek his approval on the solution.
• Visit suppliers, checks and tests I&C items to ensure that they function as per specifications. Where necessary, works with the concerned suppliers/contractors to rectify the issues and ensures that they comply with the specifications and are ready on time.
• Participates in meetings, reviews progress and addresses interface/implementation/execution issues, escalates where necessary to ensure that the project proceeds timely and smoothly.
• Independently evaluate the I&C requirement for mechanical packages in Marine & Topside, contributes to technical bid evaluation process, ensures selected vendors meet technical/engineering and delivery requirements as stipulated in the project specifications
• Plans and organizes resources and schedule.
• Provides technical/engineering support and advice to Construction/Commissioning work at site, trouble shoots and follows up to rectify the gaps or problems. Where necessary, provides off-site support and advice.
• Responsible for capturing lessons learned in his/her functional area, entering in MIMS, closing out project related MIMS actions by the close out date.
• Guides/supervises junior Engineers and provides feedback to Department Manager for their performance.

Requirements:

• Bachelor in I&C Engineering or Master of Engineering.
• Minimum 12 years of relevant working experience in I&C engineering in oil and gas sector.
• Familiarity with FPSO/FSO and market practices in the oil and gas sector or minimum of 11 years of relevant working experience for Master degree holder.

Job Description:

• To review, develop, implement, monitor and evaluate key performance indicators in alignment with Department of Nursing's set targets.
• Prepare and conduct audits to improve the standards of nursing image and care quality.
• Coordinate and faciliatate root cause analysis sessions for incidents related to Nursing Department.
• Work closely with NDNQI coordinator and indicators' owners to facilitate the collection and submission of NDNQI data.
• Educate nurses about CGH Nursing's Professional Practice Model, the concept of shared governance and Nursing Council.
• Maintain a continuous improvement mind-set to seek evidence-based practices through research.

Job Requirements:

• Possess a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Nursing or equivalent.
• Advanced diploma / post-basic certificate in any discipline for the Senior Staff Nurse position
• Registered with the Singapore Nursing Board
• Must have fully completed COVID-19 vaccinations

Only shortlisted candidates will be notified.

Job Description & Requirements

• Assist with environmental briefing and training of all levels of employees on the project.
• Promote awareness of environmental infringement prevention and damage control to all levels of employees.
• Advise the Safety Manager/Project Team on:

1. Preventing all environmental pollution.
2. Further improvement in existing sound working methods to control pollution.
3. Legal requirements affecting environmental, health and welfare.
4. Provision and use of protective clothing and equipment.
5. Potential environmental aspects & impact on new contracts before work starts and on the site safety organization.
6. Methods of prevention environmental pollution arising from new developments.

• Carry out site surveys, in association with the project management team, to ensure regular environmental inspections of site activities are carried out and submit the relevant environmental control reports to the National Environment Agency.
• Determine the cause of any incident and recommend means of preventing recurrence
• Supervise the recording and analysis of information on infringements, damage and loss, assess incidents trends and review overall safety performances
• Train subcontractors in Leighton safety procedures
• To develop and implement the Site Environmental Control Programme
• Monitor the use, disposal and reporting of Hazardous Materials, and maintain the required Hazardous Materials Register
• Degree in Bachelor Science / Environmental Control Officer Course
• 4 years safety experience in construction as ECO
• Must be registered with National Environmental Agency (NEA)
• ISO14001:2004 documentation experience
• OSHAS 18001:2007
• Valid registration with the National Environment Agency
• Operational experience in the application of environmental management principles in the construction related industry
• Fulfil training requirements of the National Environment Agency as the Registered Environmental Control Officer
• Experience in investigating and reporting environmental incidents

About Us

ENGIE is a global energy player, focused on renewables and low-carbon decentralized energy infrastructure. The Group is pillared by 4 key businesses - Renewables, Energy Solutions, Networks, Thermal & Supply, and together with our 170,000 employees, we are committed to accelerate the transition towards a carbon-neutral world, through reduced energy consumption and more environmentally friendly solutions. It brings together the company, employees, clients and shareholders, and reconciles economic performance with a positive impact on People and our Planet.

Energy is our future, save it.

Responsibilities

• Program functional analysis based on Sequence of Operation (SOO) and develop application interfaces, alarms, and dashboard to monitor and control utility services such as, but not limited to, Chilled water, Air compressors, Glycol, Steam
• Perform quality assurance/quality control for the project deliverables.
• Development of control system schematics, panel layout drawings, control diagrams, control functions write up of systems, cable schedule and data point schedule.
• Conduct and/or supervise site systems testing and commissioning.
• Coordinate, track, and report documentation changes during project execution
• Update project progress in a timely manner
• Perform maintenance and troubleshooting of live applications and associated network.

Requirements

• Degree/Diploma in Electrical/Mechanical/Automation/Building Technology Engineering or equivalent.
• 2-3 years’ experience in HVAC and Building Management Systems (BMS) industries or relevant fields.
• Proficiency in Integrated Building Management Solutions such as ICONICS Genesis 64
• Proficiency in BACnet protocol including IP, ETH and MS/TP, Modbus protocol including TCP and RTU and Networking Services and Client Workstations
• Knowledge of HVAC control applications, BMS and electrical power management systems
• Experience with Direct Digital control (DDC) and Programmable Logic control (PLC) system design, development and management is preferred.
• Ability to build and install BMS system to monitor and regulate various building services, including chillers, heat exchangers, ACMV, lighting and power metering etc
• Familiar with BCA/NEA requirements
• Has a good safety mindset and displays good WSH behaviour.
• Excellent problem-solving, organizational, analytical, and critical thinking skills

When you join ENGIE, you will have access to:

• The opportunity to have a meaningful job where you can make a difference
• A career management plan with opportunities to grow in an international environment
• Attractive and competitive package
• Dynamic and inclusive work environment
• Continuously evolve as a professional, coupled with a variety of training opportunities

If you think you have the right profile for this opportunity, submit your application before 14 May 2024.

Responsibilities:

1. Develop and implement data quality standards, policies, and procedures.
2. Define data quality metrics and establish benchmarks to measure and monitor data quality performance.
3. Conduct data quality assessments and audits to identify inconsistencies, inaccuracies, and gaps in data.
4. Collaborate with business stakeholders to understand data requirements and priorities.
5. Work with IT teams to ensure that data quality controls are integrated into data acquisition, processing, and storage systems.
6. Implement data quality tools and technologies to automate data profiling, cleansing, and validation processes.
7. Design and execute data quality improvement initiatives, including data cleansing, enrichment, and remediation efforts.
8. Provide training and support to end users on data quality best practices and tools.
9. Monitor data quality trends and proactively address emerging issues.
10. Serve as a subject matter expert on data quality matters and contribute to data governance initiatives.

*SAP will be prioritizing candidates with full working rights in Singapore*

About SAP

A market leader in end-to-end business application software, SAP helps more than 425,000 customers worldwide work together more efficiently. We know that a diverse and inclusive workforce keeps us competitive and provides opportunities for all. We believe that together we can transform industries, grow economics, lift societies, and sustain our environment. Because it’s the best-run businesses that make the world run better and improve people’s lives. At SAP, we build breakthroughs, together.

About SAP Labs Singapore

SAP Labs Singapore is the 20th engineering hub in the SAP Labs Network and is the newest innovation hub at SAP that drives product leadership, fosters the best talent, and aims to boost ecosystem and community engagement with a variety of initiatives.

SAP Labs Singapore has the ambition to expand significantly and become the Embedded Artificial Hub for SAP, leveraging on core competencies in the current teams.

Your future team

Artificial Intelligence team as part of SAP Labs Singapore has experienced professionals taking on challenges posed by the SAP customers. Based in Singapore, you will have the opportunity to work on breakthrough projects addressing real-world problems, challenging norms with some of the SAP’s key customers. As part of the global product engineering team, you will participate in rich and engaging conversations with experts around the globe.

SAP Labs Singapore provides an open, modern working environment and the opportunity to become part of the global SAP engineering community.

Purpose and Objectives

As Quality Associate / Specialist, you will work together with a team of dedicated experts including AI developers, AI scientists, data engineers, dev-ops engineers, and architects with a single goal of building the best-in-class AI products. You will work against fixed timelines and your success will be measured by the ability to deliver solutions matching the performance of top-notch artificial intelligence systems.

EXPECTATIONS AND TASKS

Your tasks include:

• Able to define quality and test strategies for cloud and machine learning based products respecting defined process- and product standards
• Analyzes, defines, implements and executes quality and test related activities according to quality and test strategy
• Creates a detailed test design incl. test system landscape definition and product standards, prepares tests (customizing & master data), authors and executes manual and/or automated tests
• Analyzes test results (issues) and takes appropriate follow-up actions
• Is subject matter expert for teams in terms of quality assurance and test related processes, methods and tools
• Initiates process or tool improvements
• Develop proficient product domain knowledge incl. relevant business processes & scenarios and a proficient understanding of customer needs
• Develop relevant knowledge about product and process standards, important legal requirements as well as quality assurance and test related tools
• Develop proficient knowledge and technical competencies of relevant programming languages and related development tools and processes
• Develop good knowledge of software development life cycle and Quality Assurance methodologies
• Ability to analyze complex integration issues
• Ability to work in global teams with different time zones

Educational and experience requirements

Required

• Degree in Computer Science or related field
• 0 to 3 years of working experience as Quality Associate, preferrable in AI focused cloud application development
• A solid foundation in computer science, with strong competencies in algorithms, data structures, objects-oriented programming, design patterns, multi-threaded programming, and software design principles
• Hands-on knowledge in at least one of the server/ client-side programming languages such as Java, Scala, Go, Python, C#, C++
• Experience using any source control tools like GIT
• Experience setting up CI processes using tools like Jenkins, GitLab etc.
• Experience with any unit testing frameworks such as JUnit, nUnit, Xunit, Jasmine, etc.
• API Testing
• Excellent written and communication skills in English language
• Familiar with Agile/Scrum methodologies
• Strong desire to overcome obstacles and make your work benefit SAP's customers
• Excellent written and communication skills in English language

Optional

• Experience with build automation tools (Maven, Gradle, Shell scripting etc).
• Experience with UI testing tools and technologies such as Cucumber, Selenium, Robot Framework, etc.
• Experience in using Performance Testing tools like Jmeter
• Knowledge of XML, web services testing (REST or SOAP)
• Operational knowledge of Linux distributions such as Redhat, Ubuntu, SUSE

Job Segment: Quality Assurance, Tester, Machine Learning, Deep Learning, Artificial Intelligence