Responsibilities

• Environmental Quality Audit, that comprises of the following inspection units:
• Entrance and lobby, lift cars, planter boxes and containers, porches, pavement, aprons, sidewalks, external game courts, carpark, driveway, hard standing, loading and unloading bay, field, gardens, side tables, bin centre / bin chute.
• 50% of the following inspection units: classrooms, lecture halls, auditoriums, laboratories, offices, staff rooms, special rooms, rooftop, common staircase / landings / steps / common areas, toilets, external compound and handrails.
• During each Environmental Quality Audit, representatives shall be present to validate that all documentations submissions are in order.
• To follow-up of Environmental Quality Audit findings, gaps identified and recommendations till close out.
• To ensure consistent remarks, comments and assessment standard for all sites during the Environmental Quality Audit in the Environmental Quality Audit report.
• To use the electronic cleaning audit system, device and forms

Requirements

The Environmental Quality Auditor(s) shall possess the following competency and experience:

• Possess WSQ Advanced Certificate in Environmental Cleaning/Services for cleaning supervisor or possess a relevant WSQ Qualification or equivalent in cleaning supervision; and
• Possess valid Environmental Control Coordinator (“ECC”) license.
• Preferably 3 years in cleaning supervision or cleaning auditor; and
• Preferably 1 year as certified ECC practitioner.

Job Description:

• To collaborate with Education and Training Department, department’s Nurse Managers/Clinician and other healthcare professionals in the development of on-the- job training and nursing-related clinical competencies, Standard Operating Procedures (SOPs) and Work Instructions
• Assist in providing initial and ongoing on-the-job training for nurses in the respective department.
• To perform clinical supervision and support newly employed nurses in the respective department.
• Act as a resource person to nurses on clinical and nursing quality-related matters.
• Enhance professional nursing development in respective department through continuous mentoring, coaching and role modeling.
• To assist Nursing Quality in the management of Nursing Quality issues as to ensure high standards of nursing practice at the respective department.
• To promote a culture of safety, quality and service excellence by constant monitoring of compliances.
• To participate in nursing quality improvement-related projects.
• To participate in physician rounds and collaborate with physicians and other allie healthcare professionals so as to ensure continuity of patient care.
• To ensure correct billing of consumables used for patients.
• To perform other assignments as and when required by the Nurse Manager/Clinician.

Job Requirements:

• Possess a valid SNB Registered Nurse Practising Certificate.
• Diploma/Degree in Nursing with a strong clinical nursing background.
• Advanced Diploma in Nursing (Orthopedic, Oncology, Med-surg)
• Clinical Instructor certificate is preferred.
• Possess a valid BCLS and AED certificate.
• Minimum 5 years of Clinical experience
• Able to commit to morning and afternoon shifts
• Singaporean/PR only

Job Description

• Establishing, implementing and maintaining credit control policies and ensuring daily internal controls are in place
• Ensure that debt collection is conducted in a professional manner and in accordance with hospital’s procedures
• Lead in AR review meetings with stakeholders to resolve billing disputes
• Monitor onward collections of proposed payment plans
• Liaise with Legal Department as required
• Report to management on status of outstanding AR position
• Assist in Project billing and collections
• Assist in income auditing for daily collections from POS/drawers
• Assist in reconciliations between daily collections and bank statement
• Assist in annual auditing activities, including AR confirmations and reconciliations
• Assist in process improvement projects and systems optimization
• Other duties as may be assigned from time to time

Requirements:

• Degree or diploma or professional studies with accounting background
• At least 3-5 years of experience, preferably in the healthcare sector in Finance or Business Office
• A self-driven, responsible and motivated individual who can contribute positively within a team environment
• Good interpersonal and communication skills
• Willing to work under pressure to meet deadlines
• Strong proficiency in Microsoft Excel application

Responsibilities

• To carry out various pest maintenance and rodents eradication works at Animal holding facilities, exhibits, habitats, aviaries and its surrounding areas
• To carry out potentially strenuous jobs, able to work diligently with minimal supervision, meticulous
• To Understand conditioning method and positive-reinforcement training.

Requirements

• Vector Control Operator, Vector Control Technician (VCT) and Vector Control Worker (VCW) licensed/certified.
• 2 years working experience in pest control, physically fit and healthy to work outdoors and carry out potentially strenuous jobs, able to work diligently with minimal supervision
• Creativity for the design of mechanical traps.
• Enthusiasm and willingness to free aviaries of rats.

Responsibilities

• To carry out various pest maintenance and rodents eradication works at Animal holding facilities, exhibits, habitats, aviaries and its surrounding areas
• To carry out potentially strenuous jobs, able to work diligently with minimal supervision, meticulous
• To Understand conditioning method and positive-reinforcement training.

Requirements

• Vector Control Operator, Vector Control Technician (VCT) and Vector Control Worker (VCW) licensed/certified.
• 2 years working experience in pest control, physically fit and healthy to work outdoors and carry out potentially strenuous jobs, able to work diligently with minimal supervision
• Creativity for the design of mechanical traps.
• Enthusiasm and willingness to free aviaries of rats.

Job Description:

• To collaborate with Education and Training Department, department’s Nurse Managers/Clinician and other healthcare professionals in the development of on-the- job training and nursing-related clinical competencies, Standard Operating Procedures (SOPs) and Work Instructions
• Assist in providing initial and ongoing on-the-job training for nurses in the respective department.
• To perform clinical supervision and support newly employed nurses in the respective department.
• Act as a resource person to nurses on clinical and nursing quality-related matters.
• Enhance professional nursing development in respective department through continuous mentoring, coaching and role modeling.
• To assist Nursing Quality in the management of Nursing Quality issues as to ensure high standards of nursing practice at the respective department.
• To promote a culture of safety, quality and service excellence by constant monitoring of compliances.
• To participate in nursing quality improvement-related projects.
• To participate in physician rounds and collaborate with physicians and other allie healthcare professionals so as to ensure continuity of patient care.
• To ensure correct billing of consumables used for patients.
• To perform other assignments as and when required by the Nurse Manager/Clinician.

Job Requirements:

• Possess a valid SNB Registered Nurse Practising Certificate.
• Diploma/Degree in Nursing with a strong clinical nursing background.
• Advanced Diploma in Nursing (Orthopedic, Oncology, Med-surg)
• Clinical Instructor certificate is preferred.
• Possess a valid BCLS and AED certificate.
• Minimum 5 years of Clinical experience
• Able to commit to morning and afternoon shifts
• Singaporean/PR only

Vector Control Worker/Technician

• Preferably with ITE-NEA Vector Control Worker/Technician Certificate, or willing to attend certification course
• With/Without Class 3 driving license (Will be able to drive home company vehicle if applicable)
• Starting Basic Salary of $1.7K
• Flexi-Work Hours (5 Day Work Week)
• Incentives and Overtime Available

Job Description

• Perform on-site fieldwork and analytical review of audit works;
• Preparation and/or review of audit documentation for financial reporting;
• Execute assigned engagement-related tasks in compliance with professional standards;
• Identify and discuss accounting and audit issues with managers and partners; and

Requirement

• Possess a degree in Accountancy or pursuing relevant professional qualification;
• With relevant a working experience in a public accounting firm (at least 2 years) will consider for audit senior position.
• Entry level candidates without relevant experience will be consider for audit associate position.
• Able to communicate effectively in both written and spoken English. To be proficient in Mandarin (to liaise with Mandarin-speaking client and review documents in Chinese);
• Proficient in MS Office applications;
• Strong interpersonal, communications, analytical and presentation skills;
• Ability to work in a team, positive working attitude, willing to learn and ready to take-up challenges at all times;
• Flexible and can work under pressure; and
• Willingness to travel in the course of work engagements.

Key responsibilities:

Demonstrate an understanding of complex accounting and auditing concepts and its applications.

Responsible for initial engagement planning, analysis of controls and processes and preparations and performance of audit field-work, documentations, management letters and reports.

Assist Team members in performing audit assignments.

Requirements:

ACCA/Diploma/Degree in Accountancy or equivalent qualifications.

At least 2 years of audit experience.

Proficient in Microsoft Especially Excel.

Familiar with regulatory and reporting requirements in audit consultancy.

Ability to work independently, communicate effectively and possess strong interpersonal skills.

• Ensure appointed MV VCD and MV motor suppliers supply equipment that meets project specificatiions.
• Ensure appointed LV MCC panel suppliers supply electrical panel (MSS with DOL, soft-starter, 2 speed, LV VSD starters and control circuit of motor starter) that meets project specification.
• To coordinate with different stakeholders subcon, suppliers, main con and consultant with regard for detail design development of the LV MCC, MV, VSD and interfacing work between subsystem work package.
• Prepare FAT & SAT test plan for 6.6 kV MV VSD and MV motor.
• Prepare FAT & SAT test plan for LV MCC.
• Update SLD drawings for tie-in to upstream incomers and all downstream ACMV equipment.
• Update Low Voltage cable sizing & short circuit calculation.
• Update actual demand load calculation.
• Prepare discrimination study with all upstream incoming breakers for both MV 6.6kV and LV 400V equipment
• Attend meeting with suppliers, main contractor and consultants to provide reasonable explanation, possible solutions and guidance if they are in doubt.
• Ensure all cable routing with their associated wall openings and / or cable risers are provided for all 6.6kV and 400V ACMV equipment.

Requirements

• At least a Diploma in Engineering majoring in MEP / Electrical or related field.
• Minimum 8 years of working experience. Those with more years of experience will be considered a senior position ie Senior Engineer / Assistant Manager
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

• Enforce an effective QA program, which follows the guidelines of the company QA Manuals, processes, and customer requirements.

• Report periodically direct to Management on performance relating to quality processes, within the projects and the shipyard

• Managing and planning the inspection activities in production, and resource planning for carrying out QA and QC activities, including NDT, Welding inspections; inspection test procedures.

• Monitoring the quality standards of yard and contractors; and the main liaison throughout projects in terms of quality, for both internal and external parties

• To identify and analyze any quality procedural or product issues, and providing corrective action plans for parties to work on

• Acting as the main champion for continuous improvement, and spearheading process improvements within the organization

• Keeping track on the quality standards in the shipyard, and ensure compliance and preparedness for internal and external audits

• Improving quality assurance processes and practices. Involved in the recruitment and mentoring of QA Engineers.

• Overseeing and coordinating the investigation of Customer Complaints and Non-conformities.

• Interfaces with customer representatives in matters pertaining to quality for assigned tasks

• Prepare product and process quality reports by collecting, analyzing, and summarizing information and trends

• Develop and report on Quality Key Performance Indicators

• Liaise with the customer and classification societies on all quality issues

• Ensure the implementation of project Quality Plans

• Review contract documentation/specifications/quality plans to identify the quality requirements and documentation deliverables.

• Conduct any quality hold points/inspections/tests or other customer nominated activities.

• Carry out materials inspections and verify segregation and traceability of materials

• Carry out welding inspections at all stages of the process

• Fit-Up Inspection (Including surveillance of pre-heat requirements)

• In-Process Welding Inspection

• Finial Visual Inspection of Completed Welds

• Witness Production verification activities (Dimensional Inspection, FAT's etc.)

• Carry out sub-contract surveillance activities where required

• Co-ordinate Customer/3rd party inspections.

• Control, populate and sign-off Welding Logs as the works progress

• Ensure the approved project Inspection & Test Plans are adhered too, signed off, and verification documentation is available at the appropriate stages of the manufacture, inspection and test process.

• Ensure appointed MV VCD and MV motor suppliers supply equipment that meets project specificatiions.
• Ensure appointed LV MCC panel suppliers supply electrical panel (MSS with DOL, soft-starter, 2 speed, LV VSD starters and control circuit of motor starter) that meets project specification.
• To coordinate with different stakeholders subcon, suppliers, main con and consultant with regard for detail design development of the LV MCC, MV, VSD and interfacing work between subsystem work package.
• Prepare FAT & SAT test plan for 6.6 kV MV VSD and MV motor.
• Prepare FAT & SAT test plan for LV MCC.
• Update SLD drawings for tie-in to upstream incomers and all downstream ACMV equipment.
• Update Low Voltage cable sizing & short circuit calculation.
• Update actual demand load calculation.
• Prepare discrimination study with all upstream incoming breakers for both MV 6.6kV and LV 400V equipment
• Attend meeting with suppliers, main contractor and consultants to provide reasonable explanation, possible solutions and guidance if they are in doubt.
• Ensure all cable routing with their associated wall openings and / or cable risers are provided for all 6.6kV and 400V ACMV equipment.

Requirements

• At least a Diploma in Engineering majoring in MEP / Electrical or related field.
• Minimum 4 years of working experience. Those with more years of experience will be considered a senior position ie Senior Engineer / Assistant Manager
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

Key responsibilities:

Demonstrate an understanding of complex accounting and auditing concepts and its applications.

Responsible for initial engagement planning, analysis of controls and processes and preparations and performance of audit field-work, documentations, management letters and reports.

Assist Team members in performing audit assignments.

Able to follow through on outstanding matters and findings independently.

Able to perform Internal control testing.

Requirements:

ACCA/Diploma/Degree in Accountancy or equivalent qualifications.

At least 3 years of audit experience.

Proficient in Microsoft office.

Familiar with regulatory and reporting requirements in audit consultancy.

Ability to work independently, communicate effectively and possess strong interpersonal skills.

Able to make planning for daily operation

Familiar with routes

Able to do data entry

Able to work as a team

Good telecommunication skills

Good in excel

Responsible and patient

Attentive and alert

Must be punctual

Willing to learn

Hardworking

Able to work under stress and long hours

Able to speak English, Chinese and Malay

Responsibilities

• Design and implement comprehensive test plans, test cases, test data and test scripts to ensure the quality of software products.
• Collaborate with Product Owners and stakeholders to define test objectives, scope and entry/exit criteria for testing phases.
• Perform system testing (e.g., functional and performance testing).
• Develop and maintain automated test scripts and tools.
• Review and analyse test results, identify defects and anomalies and work closely with the stakeholders to resolve issues.
• Continuously improve the software testing process by identifying areas for improvement in testing practices and tools.

Requirements

• Strong background in Computer Science, Computer Engineering, Information Systems Management, Information Technology or related disciplines.
• experience in software quality assurance testing.
• Strong knowledge of software testing methodologies, tools and processes.
• Experience with test automation tools such as Selenium or similar.
• Experience in performance testing tools such as JMeter or similar.
• Experience with programming languages such as Java, Phyton, or similar.
• Experience in issue management and continuous integration tools such as Jenkins, JIRA, or similar.
• Familiarity with Agile development methodologies and experience working in Agile teams.
• Familiarity with cloud-based testing tools, knowledge of security testing methodologies.
• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills and strong collaboration skills.