The primary responsibility of this position is to provide leadership for all Quality Assurance & Control matters.

This includes:

• Assuring consistent quality of production by developing processes and enforcing compliance to ISO 13485 quality system.
• Validating the production & inspection processes and maintaining validation status
• Managing the records for Quality Inspection, Quality Control, Calibration, QA Lab equipment, Training Resources, ERP Quality Module and Quality System Documentation.
• Managing a team of Engineers, QA Technicians & Quality Inspectors

The incumbent reports to the Site Leader, Singapore and Global Head of Quality (Medevio).

Roles & Responsibilties

Quality System Management

• Manage and maintain the site's quality management system (QMS) in compliance with ISO 13485 and ISO 9001 and applicable regulatory standards.
• Key stakeholder in ERP in Quality Module and DMS of site
• Ensure that the QMS effectively supports all manufacturing and operational processes, resulting in consistently high-quality product outputs.

Quality Operation & Lab Management:

• Oversee the day-to-day operations of the quality control and assurance, ensuring proper procedures and outcomes that consistently align with product specifications.
• Manage a team on quality inspection and establishing protocols fulfilling both internal, external customers.
• Develop and enforce rigorous lab testing protocols to maintain stringent quality and safety standards.

Capital Expenditure Planning and Equipment Management:

• Plan and manage capital expenditure for quality-related equipment in production to support ongoing and new operations.
• Site calibration SME and coordinator for both internal and external calibration.
• Ensure timely maintenance and calibration of quality equipment to maintain operational efficiency and compliance with industry standards.

NPI and quality engineering:

• Ensure compliance with new and pre-existing product requirements.
• Key stakeholder in new product development including qualification to production readiness.

Global Quality:

• Working with Global Head of Quality to drive Global Quality Plan
• Working with peers in Global Quality to drive strategic global initiatives, ensuring cohesive quality management across Medevio Sites

Regulatory Compliance and Auditing:

• Oversee readiness for all internal and external audits, including customer audits and third-party regulatory audits.
• Lead the preparation and submission of documentation required for regulatory compliance in all markets where products are distributed.
• Develop and implement strategies to manage and reduce compliance risks.

Supplier Management and Incoming Quality Control:

• Oversee supplier quality management, conducting audits and addressing issues to ensure supplier compliance with quality standards.
• Develop and maintain strong relationships with suppliers to ensure continuous supply chain improvement and adherence to quality specifications.

Quality Improvement Initiatives:

• Identify opportunities for process improvements and lead quality improvement projects to enhance manufacturing efficacy and product quality.
• Drive the transformation towards a paperless factory to enhance operational efficiency and data integrity.
• Implement Statistical Process Control (SPC) to monitor and control quality during manufacturing processes.
• Utilize digital tools and methodologies such as Six Sigma and lean manufacturing to improve productivity and product quality.

Team Leadership and Development:

• Manage and lead a team of skilled quality engineers and technicians, providing strategic direction, training, and development.
• Foster a culture that prioritizes quality and compliance through continuous training, learning and development programs, and succession planning.

Stakeholder Engagement and Reporting:

• Align with the global quality function on strategic global initiatives, ensuring cohesive quality management across the organization.
• Collaborate closely with manufacturing, R&D, and supply chain departments to ensure alignment on quality standards and to address quality issues promptly.
• Report on quality metrics and KPIs to senior management, providing insights and recommendations for ongoing quality enhancements.
• Communicate effectively with customers and regulatory bodies regarding product quality and compliance issues.

Complaint and CAPA Handling:

• Lead the investigation and resolution of non-conformance issues and product incidents, identifying root causes and implementing corrective actions.
• Manage the customer complaint process, ensuring all complaints are addressed promptly and effectively.
• Lead the development and completion of 8D reports, ensuring thorough documentation and effective resolution of issues.
• Oversee the implementation of corrective and preventive actions (CAPA) to eliminate the causes of potential non-conformities or issues, preventing their recurrence.

Environmental Health and Safety (EHS) and Sustainability:

• Support the development, implementation, and enforcement of an EHS policy, complying with all legal and corporate policies.
• Assist in fostering a culture of safety responsibility, providing ongoing training and resources to ensure a safe and healthy work environment.
• Support the establishment and execution of site ESG goals in alignment with Medevio's global sustainability roadmap, ensuring the site contributes effectively to broader corporate sustainability targets.

Qualifications

• Bachelor’s in Engineering or Science / Master’s in Engineering or Science
• Extensive experience within a manufacturing environment with a thorough understanding of ISO 13485 and ISO 9001.
• Six Sigma certification and/or ASQ certified Quality Engineer

About your role

• Design, maintain, and scale testing frameworks, ensuring comprehensive coverage and reliability.
• Integrate with CI/CD pipeline to ensure tests are executed as part of the development lifecycle.
• Utilize testing tools to develop and execute automated and unit tests.
• Manage bug tracking and test case management using Jira, with Zephyr to streamline test planning and execution within the Unity development workflow.
• Develop detailed automated and unit test plans and test cases, and maintain them.
• Optimize automated and unit testing strategies and tools to meet the unique needs of software development.
• Analyze test results,document systematically, and collaborate with the development team for issue resolution.
• Stay informed on the latest testing technologies, and best practices to continuously improve the testing process.

Requirements

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• At least 2 years of experience in QA process.
• Experienced with CI/CD practices.
• Skilled in using Jira for issue tracking, with proficiency in Zephyr for managing test cycles.
• Strong communication abilities and a detail-oriented mindset as a collaborative team member.

Food Processing Technician (with Logistics Support) is responsible for combining food processing responsibilities with occasional support for our logistics operations, ensuring the seamless flow of our high-quality food products from production to customer.

Production:

• Follow established production procedures and safety guidelines.
• Operate and maintain food processing equipment.
• Inspect and weigh ingredients to ensure accuracy.
• Package and label finished products according to company standards.
• Maintain a clean and sanitized work environment.

Logistics Support (Occasional):

• Deliver products to customers' locations in a timely and courteous manner.
• Load and unload food products from the company vehicle.
• Collect payment for deliveries and reconcile cash with invoices.
• Inspect and maintain the company vehicle to ensure safe and reliable operation.
• Adhere to all traffic laws and regulations while driving.

Any other ad-hoc tasks as assigned.

Qualifications

• Prior experience in a food processing environment is preferred.
• Able to converse in basic English and/ or Chinese language
• Valid Class 3 or 4 driver's license with a clean driving record.
• Ability to lift and carry moderate weights and work in a fast-paced environment.
• Strong attention to detail and ability to follow instructions.
• Ability to work independently and as part of a team.

6 days work week

Mondays to Saturdays

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Require experience with Quick Book and Xero system is an advantage. Able to work independently. Office skills and good communication is essential

Prudential’s purpose is to be partners for every life and protectors for every future. Our purpose encourages everything we do by creating a culture in which diversity is celebrated and inclusion assured, for our people, customers, and partners. We provide a platform for our people to do their best work and make an impact to the business, and we support our people’s career ambitions. We pledge to make Prudential a place where you can Connect, Grow, and Succeed.

This role is responsible to deliver the right protection and group product solutions to targeted customer segments through our distribution channels (Agency, Bancassurance/Partnership, Group, Digital, etc) and also to ensure effective maintenance of the existing product shelf.

Job Description:

• Ideation and development of new product solutions that are market leading, meet customer needs and improve financial performance.
• Support the implementation of strategic initiative across PACS to drive the protection and group business
• Work with Actuarial Pricing in achieving a balance for all stakeholders, eg. Compensation, pricing, product benefits, time to market, etc
• Participate and support the Head of Department in engagement with distribution partners on product ideation and development
• Work with the delivery/implementation team and other stakeholders to ensure product launch is in accordance to the product plan and meets the objectives of the business case
• Work with marketing and distribution teams to provide education, support and communication tools to better target new customer and service existing customers.
• Tracks performance of products launched and collaborate with stakeholders to improve its performance and/or address any gaps
• Actively monitor the competitive environment and provide the relevant analysis and/or recommendation to support the distribution

Who we are looking for:

Competencies & Personal Traits

• Strong analytical skills and an ability to understand complex insurance product levers
• Good spoken, presentation skills and written communication as well as articulate interpersonal and negotiation skills
• Demonstrate influence and maturity for effective collaboration across departments
• Adaptable and can deal with change and ambiguity
• Dynamic individual who strives in fast moving environment

Working Experience

• Diploma / Degree with at least 8 years or more of experience with successful track records in the area of life product developments
• Ability to work in a team effectively while managing tight timelines and working in a fast-paced environment
• Independent and able to manage relationships with internal and external stakeholders

Education

• Degree in Actuarial/Marketing/Business Administration/Mathematics or related discipline

Language

• English

Prudential is an equal opportunity employer. We provide equality of opportunity of benefits for all who apply and who perform work for our organisation irrespective of sex, race, age, ethnic origin, educational, social and cultural background, marital status, pregnancy and maternity, religion or belief, disability or part-time / fixed-term work, or any other status protected by applicable law. We encourage the same standards from our recruitment and third-party suppliers taking into account the context of grade, job and location. We also allow for reasonable adjustments to support people with individual physical or mental health requirements.

Summary:

• Basic salary up to $3600
• Performance bonus (up to 3 months)
• Location: Newton (2 minutes walk from MRT station)
• 5 days work week @ 8.30am - 5.30pm

Key Responsibilities:

• Make calls to collect outstanding payments
• Ensure timely and effective collection of all debts
• Negotiate re-payment plans
• Liaise with lawyer to follow up the legal actions against bad paymasters
• Maintain contact with clients to ensure the debts are clear
• Resolve queries about the outstanding debts
• Update daily receipts to the accounting system
• Other relevant ad-hoc duties

Key Requirements:

• Min Diploma in any field
• Min 1 years of relevant experience in credit control

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

Responsibilities:

• Create test plans and test reports for functional and/or performance tests.
• Create test cases based on user stories or functional specifications.
• Conduct manual and automated testing (if applicable) on software applications.
• Conduct performance testing to ensure that the delivered system meets the performance requirement.
• Identify, track and retest bugs.
• Report testing progress to the project stakeholders.
• Provide support for User Acceptance Test.
• Work closely with the project team to develop a strong understanding of the project and testing objectives, and to ensure that bugs reported are fixed within the timeline.

Prerequisites:

• Degree/Diploma in Computer Science, Computer Engineering or its equivalent.
• Must have at least three years of software testing experience in web-based applications.
• Good oral and written communication skills.
• Strong troubleshooting and problem-solving skills.
• Experience with CI/CD tools (i.e. Gitlab or Jenkins).
• Experience with open-source automated testing frameworks (i.e. Playwright, Cypress, Selenium, Appium or Cucumber).
• Experience with API testing as well as integration testing with external systems.
• Experience with open-source performance testing tools (i.e. JMeter, K6, Gatling or Locust).
• Proficiency in programming languages (i.e. Python, Java or JavaScript).
• Working experience in an Agile environment will be an added advantage.
• Basic understanding of SQL.
• To drive and advocate continuous improvement in testing practices and tools.
• Ability to work independently with minimal supervision.
• Certification for software testing (i.e. CTFL, CTAL, CSTE, CSTP or CSQA) will be an added advantage.

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

Job Description & Requirements

-To carry out pest control service for various client’s premises such as town council , F & B outlet , schools , residences blocks , office buildings and etc.

- To ensure and maintain company equipment in a good and working condition

- To submit service report to client promptly

- With / Without Experience are welcome (training will be provided)

- Class 3 driving licence will be an advantage

- A valid full vector control worker / technician licence will be an advantage

- Able to work OT will be an advantage

- Physically Fit and able to read/write

- Welcome Retirees / Senior Citizen to apply

- For Singaporean / PR only

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. Our software platform is leveraging cutting edge cloud/on-premises/edge platforms, advanced computer vision algos, advanced ML concepts & models and more.

The company is led by globally renowned experts who previously headed large groups at Microsoft and Intel. The company HQ is located in Singapore (One North Area) and operates in over 10 countries.

Cynapse is looking for a talented and highly motivated Project Management Officer (PMO)/Quality Assurance (QA) Intern to join our team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of project planning and management, working in a cutting edge, dynamic and professionally challenging environment.
Successful interns may be offered a full-time permanent position at cynapse at the end of the internship period.

Responsibilities
The selected candidate will be involved in one or more job item listed below, depending on management decision:
- Supporting the planning and delivery of Vision AI Software Projects/Programs in Singapore and other countries
- Support multiple on-going projects
- Assist with the project planning, resourcing and scheduling
- Assist in ensuring that projects are delivered on time, and provide timely reports on project status and activities Assist in requirements gathering and validation, solution development and testing, deployment, UAT and solution commissioning
- With guidance, perform usage tests on software thoroughly, identifying bugs and defects.
- Evaluates different functionalities and aspects of the product and generate report.
- Assist in communicating and managing vendors, sub-contractors, partners and other stakeholders
- Follow the company PM best practices
- Work in an Agile environment (SCRUM)

Qualifications
- Completed at least 1 year of studies as part of a Diploma/Bachelor/Master in one of the following subjects: IT/Engineering/Project-Management
- At least 6 months of experience in managing or delivering IT project/s
- Some Experience with vendors and partners management
- Analytical Thinking
- Innovative, motivated and a quick learner, attention to detail, curiosity, and passion for technology
- Bonus: Technical background/experience with software development

Benefits
- Unique opportunity to work with a talented global team on cutting edge technologies
- Informal and exciting work environment with flexible hours

Job Types: Full-time, Internship

Contract length: 6 months

Benefits:

• Flexible schedule

Schedule:

• Monday to Friday

Work Location: In person

Perform materials checking, finished products, production line. Ensure quality performance through examination of proper inspection, testing and measuring equipment, process capability studies and mistake proofing. Analysis and disposition of customer returns. new products, maintaining existing listings, instructions and product labeling.

Summary:

• Basic salary up to $3600
• Performance bonus (up to 3 months)
• Location: Newton (2 minutes walk from MRT station)
• 5 days work week @ 8.30am - 5.30pm
• Familiar with hire purchase operations

Key Responsibilities:

• Make calls to collect outstanding payments
• Ensure timely and effective collection of all debts
• Negotiate re-payment plans
• Liaise with lawyer to follow up the legal actions against bad paymasters
• Maintain contact with clients to ensure the debts are clear
• Resolve queries about the outstanding debts
• Update daily receipts to the accounting system
• Other relevant ad-hoc duties

Key Requirements:

• Min Diploma in any field
• Min 2 years of relevant experience in credit control
• Possess knowledge of hire purchase operations and the whole cycle of legal process

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Overview

The Job Holder will support in building improvement capabilities and culture in the NUHS Regional Health System Office (RHSO), including community partners such as GPs. The Job Holder will be involved in co-developing and conducting quality improvement training for RHSO staff and community partners, as well as facilitate and coach small to large scale improvement projects through the use of appropriate tools/methodologies.

Job Responsibilities

1. Deliver QI Training

• Develop training materials and resources (e.g. training guides and e-learning videos) on quality improvement
• Conduct and facilitate quality improvement training sessions/workshops for RHSO staff and partners
• Gather feedback on training sessions and use of appropriate improvement methodologies/tools
• Deliver training on lean management and human-centred tools to impart knowledge and skills to hospital staff.

1. Facilitation of improvement projects

• Facilitate and coach department/division and organisation-wide level improvement projects to improving quality and processes through the use of appropriate tools/methodologies
• Monitor the progress of improvement activities and guide teams to take appropriate actions
• Assist in interpreting data to measure the effectiveness of the improvement activities

1. Strategy & Culture Building

• Assist in development and implementation of Improvement framework and strategies
• Support initiatives or events that promote improvement and Innovation culture in RHSO
• Lead engagement with HODs to influence and identify areas of improvement in quality and safety

1. Any other tasks as assigned

Requirements

Qualification Required and Area of Discipline

Good degree in any discipline, preferably in Life Sciences, Business Administration, Industrial Design

Prior healthcare sector experience is preferred

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Proficient in quality improvement methodologies such as Lean, process/value-stream mapping, design thinking
• At least 1-2 years of experience in facilitating workshops and conducting trainings
• Confident in coaching and guiding fellow colleagues in Quality Improvement tools
• Certified Six Sigma Green/Black Belt will be an added advantage
• Able to engage stakeholders and work through doctors, nurses, allied health professionals, operations and administrative staff
• Able to work independently and as a team
• Ability to perform even under tight timelines
• Good analytical and organization skills
• Good writing and verbal communication skills
• Open to learning and trying new things. Able to grasp concepts easily and be able to think on the feet.
• Highly self-driven and self-motivated, positive attitude and perseverance to overcome obstacles

Remuneration: Basic up to S$3,600 + PB (~3 months)

Location: Newton

Working hours: Mon-Fri, 8.30am to 5.30pm

Job Description:

• Making collection calls
• Timely and effective collection of all debts and customers payments
• Negotiating re-payment plans
• Liaising with lawyer to follow up on the legal action taken against the bad paymasters
• Liaising with vehicle repossesses to follow up on repossessed vehicles
• Maintaining contact with clients to ensure outstanding balance are clear for payment
• Resolving queries both internally and externally around customers outstanding balance
• Posting and allocating daily receipts to accounting systems

Job Requirements:

• Must have knowledge of hire purchase cases and hire purchase operations, legal recovery, experience in going through the whole cycle of legal process of debt collection
• Ability to advise on what legal action is best at different stages of debt collection
• Ability to establish and maintain good client relationships, both internally and externally at all levels
• Ability to reconcile complex accounts and have excellent attention to detail
• Diploma / Degree, At least 2 years relevant experience
• Bilingual in English and Mandarin in order to liaise with Mandarin speaking stakeholders

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Responsibilities

• Communicate and reconcile quality / technical matters to various stakeholders.
• Investigate supplier non-conformance, drive root cause analysis, discuss corrective actions and implement process improvement, including source inspection.
• Work with suppliers to ensure their manufacturing processes comply with customers’ expectations.
• Monitor non-conformance performance and collaborate with suppliers to drive continuous improvement in supplier’s quality.
• Maintain and improve product quality by completing product and compliance audits.
• Prepare and review monthly data to analyse quality issues.
• Process engineering changes (ECN).
• Maintain customer’s claims system.
• Maintain calibration process for Shimadzu’s equipment.
• Ad-hoc duties as assigned.

Requirements

• Diploma or degree in supply chain management, engineering or science.
• At least three years of experience in quality engineering or related role.
• Having experiences in mechanical engineering or related field will be advantageous.
• Possess good communication skills and able to articulate ideas succinctly to local and international stakeholders.
• Possess a good analytical mind, positive attitude and patience under challenging situations.
• Having a tenacious desire to solve challenging technical problems will be a distinct advantage.
• Possess a good organizational skill and a strong penchant for neatness.
• Possess a high level of proficiency in Microsoft Office and Microsoft 365.
• Able to work independently and a good team player.
• Possession of a Class 3 driving licence is preferred.

We regret that only shortlisted candidates will be contacted.

Job Scope

• Operate and maintain production machinery to ensure efficient and safe operation.
• Assist in the preparation of meat products, minimizing waste.
• Pack, weigh, and label completed products according to company standards.
• Maintain a clean and hygienic work environment, including equipment and tools.
• Perform other ad hoc tasks as assigned.
  

Job Requirement

• Ability to work in a fast-paced environment
• Attention to detail and commitment to quality
• Good interpersonal skills

Working Days

6 days

Mondays to Saturdays

Job Scopes

• Keep track and sorting of invoices

- Keep track and look for missing invoices (invoices that are not back yet, invoices that are given back to

customer)

- Print invoices that are not back and pass back to driver for signature and chop.

- Photocopy incorrect invoice for credit notes, debit note and other corrections.

- Make sure the customer and driver sign and chop on the invoices.

- Print missing NTUC invoices, Goods Received Note or Purchase invoice for filing if it is found on the website.

- Modify and print out daily list for invoice sorting.

- Ask for reason as to why the invoices are not back yet.

- Scan invoices requested by customer

• Matching for DFI and NTUC invoices.

a. Update Excel for both DFI and NTUC

b. NTUC

- Photocopy incorrect invoices and print out Purchase Order for Credit note, Debit Note.

- Inform Order desk to ask the customer to reopen or modify purchase order if they are closed, incorrect

or did not open purchase order.

- Scan and submit invoices for matching.

- Look for Purchase order/ Good Received note on the website if the invoice is returned without the

Purchase Order and Good Received note Number/ Attachment.

- Submit the Credit note/Debit note along with invoices.

c. DFI

- Create/modify master list to be submitted to DFI for invoices that needs to be rectify or added in for

matching.

- Photocopy the incorrect invoices and submit to DFI.

- If Credit note is done, ensure the amount is correct and submit.

Requirements

• Minimum relevant diploma qualifications
• Strong communication skills
• Able to multi-task
• Able to work under time pressure
• Fluent in Chinese and English

5.5 working days

8:30am to 5.30pm (Mondays to Fridays)

8.30am to 12.30pm (Saturdays)

• Perform rigorous quality checks and controls to ensure food products are safe and compliant with health and safety standards.
• Testing food samples in both Chemistry and Microbiology
• Work closely with team members and suppliers including QA, FoodTech, Engineers and relevant teams to enhance product quality and safety.
• Conduct sampling, food audits and inspection at suppliers’ sites according to company guidelines and checklists.
• Prepare reports and follow up on action plans arising from audits or inspections.
• Stay updated on the latest trends and scientific advancements in food technology and nutrition.
• Evaluate and verify product compliance against set specifications, including nutritional content, appearance, taste, texture, odor, colour standards etc.
• Perform ad-hoc tasks as assigned.

Job Requirements:

• Bachelor’s degree in Food Science and Technology, Food Nutrition, or a related field.
• Strong understanding of food and laboratory testing, including Chemistry and Microbiology.
• Knowledge of Halal, Kosher, HACCP, FSSC, and ISO procedures is an advantage.
• Preferably 2 years of relevant working experience.
• Strong communication skills for interacting with cross-functional teams, vendors, and potentially clients.

Other Information:

• This is a contract position for up to 6 months, with the possibility of extension.
• Working Hours: 8:30 AM to 6:00 PM, Monday to Friday.
• Work Location: Joo Koon.

We are looking for a Software Quality Assurance Analyst who are passionate about improving the quality of the services. The QA will be part of an in-house team tasked with developing and maintaining the system.

Responsibilities:

• Create and maintain test cases, test plans ensuring that they are up to date with requirements and policy changes
• Create, maintain and improve the automated test framework and test environments
• Conduct testing on new features and file defects
• Perform various tests such as manual/functional/performance/exploratory tests support UATs
• Assist in resolving production cases
• Participate in all agile ceremonies

Requirements:

• Degree in software engineering, computer engineering, electrical engineering or Infocomms-related discipline.
• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with various testing tools will be an added advantage:
• Experience with open-source automated testing frameworks (i.e. Robot, Appium, Selenium) or Enterprise level testing tools (e.g. HP Mobile Center, HP UFT, HP QC, Sprinter)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Microbiology and Biochemical Product Testing:

• Perform EM such as active air sampling, surface and passive air samplings, plate readings and inspection of cleaned facility and sterilised equipment
• Responsible for planning,monitoring and approving microbiological testing
• Perform method Qualification,validation and product testing (e.g. sterility and endoxin) to support QC lot release.
• Perform stability testing of released final products as per protocol and timelines.
• Support assessment of certification/accreditation and services provided by external labs for QC testing.
• Knowledge in biochemical testing, including cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Appearance) as per USP, JP, and EP standards

Documents, Records and Data Management:

• Drafting and updating of Standard Operation Procedures (SOPs) and specification documents for EM, equipment, sampling plan, test methods, final products and raw/packaging materials.
• Author and review technical protocols and reports (e.g. EM risk analysis), develop guidelines and standard practices for data documentation, analysis and training.
• Review test results, document data and produce trends (e.g. EM) in an efficient, organised and presentable manner to facilitate discussions, support business and performance metrics reporting.

Deviations, Change Control and Audits Management:

• Support deviations (e.g. test OOS, EM excursion) initiation, investigations and root cause analysis for product defects and quality lapses.
• Support change control and CAPA implementation.
• Support internal and external audits/inspections.

Equipment and Lab Management:

• New equipement commisihing support( Operational qualification-OQ, Performance qualification- PQ
• Monitor and schedule equipment calibration and maintenance as per schedule and site master file.
• Perform lab housekeeping, lab cleaning and biohazard/waste management.
• Perform monitoring and procurement of lab inventory, for e.g. materials and consumables.

Continuous Improvement:

• Implement initiatives to encourage improvement of QC procedures, activities and workflows.
• Conduct routine literature review through established publication channels to ensure continual knowledge proficiency on both GMP and current technological trends relevant to CellVec’s activities.

As a Non-Volatile Memory Quality & Reliability Assurance (NVMQRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analyis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., PE, PYE) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems (example: GPSS) for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode for NOR * NAND product family
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.