Roles & Responsibilities

• Perform environmental control/enforcement support to the team.
• Identify any foreseeable risk of pollution arising from the workplace or work processes.
• Propose practical action to eliminate any foreseeable ill-health, prevention of pollution at workplace.
• Any other ad hoc duties required or assigned by Management that are relevant to the project.

Requirements

• Registered ECO (NEA)
• At least 2 years of relevant working experience
• knowledge of all relevant environmental policies, legislations, and guidelines, independent, with strong discipline and accountability.

Responsibilites:

• To plan, develop and implement the organizational strategy and framework for patients’ relations and positive experience in the patients' journey of care
• To oversee and be responsible for the communications and patients’ relations matters of through befriending and building of a strong rapport with the patients and their family.
• To collaborate with HODs and line staff to operationalize the patients experience strategy.
• To provide expertise and resources in educating the Head of Departments and line staff in the philosophy and techniques of patients experience improvement.
• To set benchmarks/targets for evaluating the effectiveness of the patients’ relations services and programmes for the purpose of continuous improvement.

Principal Responsibilities

1) Patients Relations Engagements

• To establish contact with patients and their family (next-of-kin or spokesperson or designated caregiver) at the point of referral (hospital tour) or upon admission to the wards.
• To be the point person of the hospital for the patients and their family.
• To implement workflow to ensure a positive experience at every touch point with patients and their family.
• To identify caregivers stress and discern sensitive issues and offer counsel/suggestions to solve the problem or to handle the situation.
• In any crisis situation to advise and support the Head of Department and the staff on the appropriate approach and action to be taken to diffuse anger and tension, at the same time relate to the patient and his/her family to offer empathy and counselling, where necessary, to calm the situation. Offer practical solutions and support to the patient and the family where caregiver stress has been identified.
• Identify and assist/support staff andHead of Departments who are struggling with patients’ relations and communication issues.
• To supervise, train and mentor the team of Ward Ambassadors who are part of the Patients Relations Team.
• To review and assist in handling feedback and complaints received through the Patients Feedback Form with appropriate (verbal/written) responses.

2) Patients Experience Programmes

• To work with Corporate Communications, Pastoral Care Services and Nursing in organizing patients’ engagement events.
• To develop programmes and events to promote patients’ engagement and improve patients experience.

3) Family/Caregivers Engagement

• To proactively identify caregivers stress and engage caregivers in conversations for the purpose of offering empathy and support, solutions and resources that will enable them to cope better.
• To collaborate with external agencies like Caregivers Alliance in supporting the caregivers and post discharge follow up.
• To participate in ward processes relevant to patients’ relations and experience.

Secondary Responsibilities

• To provide training in dementia care to staff as well as to caregivers.
• To carry out duties and responsibilities that may be assigned from time to time.

Job Requirements

• min. Diploma/Degree in Public relations, Communications and Counselling related field of study
• Prior 3-4 years of relevant working experience in hospitality or healthcare public relations or caregiver support and counselling.
• Minimum 4-5 years relevant experience in a managerial role.
• Prior patient relations work experience from Healthcare/Social Service industry
• Has excellent interpersonal and communication skills.

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp or handle complains before from suppliers

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Basic Salary + Fixed Allowances (UP$3600) + Incentive
• Variable Bonus + Meal Provided
• Working days: 5.5 Days
• Working Location: Jurong East
• Excellent Welfare & Benefits

Job Scope

• Assisting the Restaurant Manager in overseeing of the service of the Restaurant.
• In-charging the restaurant when Restaurant Manager is not around.
• Greeting and coordinating the guests’ seats and assign guests to tables suitable to the size of each group.
• Recording and reporting all food-related complaints to the Chef immediately.
• Ensuring team briefings are carried out before each service period.
• Promoting the restaurant by establishing a loyal and regular customer base, maintaining a regular customer database and personalising customer service.
• Maintaining the highest standard of cleanliness, the maintenance of furnishings and equipment and the proper set up of in the Restaurant and connected areas or pantries.
• Participating in monthly physical stocktake of the Restaurant, including but not limited to glassware, plate and crockery.
• Assisting the Restaurant Manager in implementing and developing training programs.
• Monitoring inventory levels.
• Preparing daily report when Restaurant Manager is not around.
• Reporting restaurant’s situation daily to Restaurant Manager.
• Performing miscellaneous job-related duties as assigned.

Requirement

• GCE O Level and above
• 1 – 3 years related experience in F&B Managerial positions

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Develop and manage patient safety incident frameworks, conduct investigations, and analyze incident data.
• Implement and coordinate patient safety programs, including safety reviews, committees, and campaigns.
• Identify safety risks, design preventive measures, and collaborate with clinical risk management for improvements.
• Provide training, create resources, and facilitate knowledge-sharing to enhance organizational capabilities.
• Offer administrative support to safety committees and collaborate with stakeholders for quality improvements.

Requirements:

• Minimum Degree in Nursing, Social Work, or Allied Health disciplines.
• 0–4 years of relevant healthcare experience, especially in patient safety or clinical quality improvement.
• Proficient in MS Office applications; knowledge of basic statistics is advantageous.
• Demonstrates strong organizational, analytical, and communication skills; meticulous and proactive.
• A good team player with the ability to work independently and engage effectively with stakeholders.

Interested candidates who wish to apply for the advertised position, please click on “Apply Now”. Alternatively, you may email us an updated copy of your resume (Attn: HUEY) for a confidential discussion.

Job Code: HUEY

EA Reg No: R24122358 (YEO HUEY CHEEN)

EA License: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

We regret that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at https://www.persolkelly.com.sg/policies. I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

• The Senior Supplier Quality Specialist will reports to the Supplier Quality Supervisor will be responsible to support the development and maintenance of Supplier Quality Management business processes to comply with all applicable regulatory requirements and Quality Policies and Procedures.
• You will ensure oversight on the site’s supplier quality and material release processes are executed in accordance to Quality Policies and Procedures

Major Responsibilities:

• Provide Leadership for the Supplier Quality team as a senior specialist in the absence of the manager and Supervisor
• Ensure compliance with applicable policies, processes and procedures, contributing to the execution of strategies and oversight of Supplier Quality programs
• Execute and provide oversight on procedures to ensure that incoming materials including raw materials and commodities received at our Company to meet approved company policies and processes.
• Manage investigations arising from materials nonconformity with cross functional team.
• Serves as the primary contact to review and follow up on Supplier Qualification documentation (e.g. Approved Supplier Lists, Quality Questionnaires, customer complaints, Supplier packages etc.) and activities (e.g. supplier audits, supplier review, supplier change notification etc.)
• Prepare, maintain and facilitate review of the GMP documentations (Quality Technical Agreement and Internal Quality Technical Agreement)
• Coordinate site supplier quality issues (such as deviations), audit assessments and subsequent follow-up actions.
• Support global supplier quality team initiatives or other site improvement projects. Perform review/audit of Incoming material inspection package which includes receiving, sampling and testing compliance. Completion of Incoming Raw Material checks and release and the administration of Quality Logs, e.g. QA Hold.Review / Approve material master data set up for new material introduction.

Requirements

• Min Diploma / Degree in any science / engineering courses
• Min 2 years of Supplier quality exp from Pharma industry

$4K to $5K

office hours

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

JOB DESCRIPTION:

Department: Production Control of Li-ion Battery

Reports to: Deputy General Manager

Functional relationships:

- Li-ion battery system and operation design in Japan

- Li-ion battery Production and Material Planning Manager in Japan

POSITION PROFILE:
This position is to propel any activities related production management in both business and infrastructure with highly specialize global system and operation knowledge for battery operation standardization.

Key Duties & Responsibilities:

• Policy, strategy alignment and coordination of Project by collaborating with Japan HQ or other group company in Japan.
• To initiate periodical meetings with Japan HQ or other group company to solve problems in own division.
• Collaboration new model introduction for Liquid Cell including customer approval.
• System and operation design change for productivity improvement.
• Material Introduction and EOL management.
• Global System and Operation design expertise in SCM and Production Management.
• Training and education for local Production Control Planner.
• Window person to TMM , MDW and Headquarter to facilitate effective communication / knowledge transfer to strengthen global SCM.

Ability/Competency required:

• To hold bachelor’s degree in economics or any business field.
• To have deep & specialized technical knowledge in Li-ion battery and to be able to fully utilize it in actual job for improvement.
• To have logical thinking, analytical skill and good SCM system and operation knowledge.
• To have strong mind-set for change and improvement.
• Excellent interpersonal communication skills, analytical skills, project management skills, and troubleshooting skills.
• To have networking ability with Li-ion battery oversea plant and related functions.
• To have business fluent Japanese and English language skills to liaise with Japan factories, Business Planning, HQ related departments and local staff in MES factory.

Murata Electronics Singapore is committed to providing a safe and secure environment for all job applicants.

Please note that Murata Electronics Singapore does not charge any fee for job applications or interviews. If you receive any suspicious emails or messages claiming to be from Murata Electronics Singapore, please do not respond and report it to us immediately.

JOB SUMMARY

• This role could be based in Singapore and Kuala Lumpur. When you start the application process you will be presented with a drop down menu showing all countries, Please ensure that you select a country where the role is based.
• We are seeking a highly motivated and detail-oriented Technology Control Automation Project Manager to lead and deliver projects aimed at automating key technology controls within our organization. The successful candidate will manage end-to-end project lifecycles, collaborate with cross-functional teams, and ensure timely and effective implementation of automation solutions that enhance our risk management and compliance capabilities.

RESPONSIBILITIES

• Project Planning and Execution
• Define project scope, objectives, and deliverables in collaboration with stakeholders.
• Develop detailed project plans, schedules, and budgets, ensuring alignment with business priorities.
• Manage resources and assign tasks to ensure project milestones are met on time and within budget.

Stakeholder Collaboration

• Work closely with technology, risk, compliance, and operations teams to understand control requirements.
• Collaborate with software developers, data analysts, and third-party vendors to design automation solutions.
• Serve as the primary point of contact for all project-related communication.

Control Automation Implementation

• Oversee the development and deployment of technology solutions to automate manual controls.
• Ensure solutions are scalable, secure, and compliant with industry standards and regulations.
• Perform testing, validation, and quality assurance on automated controls.

Risk Management and Compliance

• Identify and mitigate risks related to project execution and control automation.
• Ensure projects adhere to organizational policies and regulatory requirements.
• Conduct post-implementation reviews to assess control effectiveness.

Reporting and Documentation

• Track project performance and prepare regular status reports for leadership.
• Maintain comprehensive project documentation, including requirements, testing results, and lessons learned.
• Provide insights and recommendations for continuous improvement in control automation.

Strategy

• Good understanding of Group T&O strategy and its implications managing strategic programs with respect to technology risk management role.
• Support the Risk Management leadership team in shaping, defining, and driving longer term T&O risk management strategy
• Awareness and understanding of the Group’s and Function’s objectives to deliver risk buy-down initiatives.

​​​​​​​Processes

• Provide timely and accurate reporting to internal risk assurance teams, and appropriate forums/committees.
• Escalate appropriately to ensure the Global Head, T&O Risk Management is updated and able to intervene as required.
• Ensure risk ownership by AE and Chief Product Owner of strategic programmes – specifically ownership of residual risk evaluations and associated remediation activities.
• Responsible for ensuring compliance with policies applicable to which impact technology risk. Challenge processes, procedures, and policy if there is opportunity for improvement.

People & Talent

• Champion and act as a role model of the Group’s values and culture.
• Lead and support a change in mindset, building a culture of client centricity, agility, and accountability through standardised metrics and measurement, ensuring everyone in Operations are drivers and owners of client outcomes.
• Ensure team structure/capacity is reviewed to enable delivery of client outcomes.

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance matters.
• Support the Global Head, T&O Risk Management to achieve the outcomes set out in the Bank’s Conduct Principles.

Key Stakeholders

• Technology & Architecture
• Business Domains Wealth & Retail Banking, Corporate & Investment Banking
• Tech & Ops Risk Management & Management Team
• Regional Chief Tech & Ops and Country Management Teams
• Risk & Audit Team
• Functional Partners including HR, Finance etc.

Our Ideal Candidate

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 8+ years of experience in project management, preferably in technology risk, IT governance, or automation.
• Strong understanding of technology controls, risk management, and compliance frameworks (e.g., COBIT, NIST, ISO 27001).
• Experience with automation tools, scripting languages, and software development methodologies.
• Proven experience in risk management strategic planning and organisational leadership, preferably in a complex organisational setting
• Demonstrated track record of successfully delivering major programs, risk-buy downs through effective risk management strategies and initiatives
• Excellent communication and interpersonal skills, with the ability to engage and influence stakeholders across all levels in the organisation
• Exceptional leadership abilities, with a track record of driving change, fostering collaboration, and achieving results
• Strong project management skills, with the ability to manage multiple initiatives concurrently and deliver them on time with quality
• Proficiency in risk management frameworks, methodologies, and tools
• Professional certifications in project management, risk management are highly desirable

Role Specific Technical Competencies

• Project Management
• Stakeholder Engagement
• Manage Compliance
• Manage Privacy and Secrecy
• Manage Records Management
• Manage Data Quality
• Manage Data Sovereignty
• Manage People
• Business Process Improvement

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

• Support and coordinate project management through analytical, problem solving and decision making skills.
• Develop budgets and schedules to conform to project requirements.
• Generate purchase requests and vendor paperwork in assigned projects.
• Support monthly financial projections by analyzing consultant, employee and subcontract labor.
• Develop and maintain management plans as per contract guidelines.
• Coordinate and compile input from team members and various weekly reports.
• Develop work breakdown structure and prepare diagrams, graphs and charts to analyze problems.
• Guide, supervise, support, train and conduct quality control.
• Support senior staff and ensure satisfaction of project milestones and customer requirements.
• Develop business architecture project schedule as per established customer requirements.
• Describe enterprise primary business functions and determine stakeholders.
• Define organization and function transcending support, core and strategic processes.
• Monitor project execution to achieve maximum effectiveness for international and domestic projects.
• Oversee and report performance and progress through analytical techniques to validate cost and performance.
• Minimize company commercial risk through accountability of major project decisions.

Job Description and Responsibilities

•Drive key projects in Card Operations, together with business users and technology team, to increase efficiency, improve productivity and enhance customer journey.

•Execute standardization, risk and control agenda in Cards product-processes, including self-assessments, internal reviews and audit reviews, and ensure compliance with operational policies, procedures and regulations.

•Prepare risk review reports, report findings, recommend corrective actions and preventiveactions.

•Review and recommend process improvement for productivity effectiveness and efficiency, which includes performing problem analysis on processes and provide recommendation for change and mitigation of risks.

•Develop training and/or change management materials and activities to support new processesand procedures.

•Manage the Business Continuity Planning (BCP) exercises in Card Operations as part of theBusiness Continuity Management.

Job Requirements:

•Degree Holder

•Preferably 3 – 5 years’ experience in operations / process re-engineering function. Fresh graduates are welcome to apply

•Able to multi-task and cope with change and diversity in a fast-paced environment

•Possess strong analytical and problem-solving skills, able to think objectively and 'think outside the box' when analyzing issues

•Meticulous with an eye for details and quality mindset

•Strong command of English with excellent verbal/written communication and interpersonal skills

•Able to liaise with various functions and stakeholders

•Proficient in the use of Microsoft Office, specifically Microsoft Excel Macro, Powerpoint &Access

•Knowledge in Python is preferred.

•Team player, self-motivated and resourceful

• Well Established Company
• Basic $3200 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

Job Description

• Lead and manage the instrumentation, control and automation engineering and design works.
• Ensure instruments, electrical and control designs compliance with customer specifications.
• Lead the team to provide technical supports to all instrumentation, control and automation works.
• Collaborate nternal stakeholders, clients, consultants, vendors and contractors.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, etc.
• Coordinate, provide direction and support to the project team.
• Manage and supervise the site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and other stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• At least 15 years of relevant experience
• Experience in Selection, installation and Commissioning of Instrumentation.
• Experience in system design, network design, installation and commissioning of the control and monitoring systems.
• Experience in Basic Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with sub-contractors, consultant and Client.
• Good technical knowledge in understanding instrumentation, control and automation system.
• Knowledge in electrical system and mechanical process system will be an advantage.
• Good technical understanding of water, wastewater and pollution control system.
• Relevant experience in design and site work for water and wastewater treatment works.
• Meticulous and analytical with excellent problem solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Credit Control Executive

• Industry: Manufacturing
• Gross Salary: Up to $3500 (Depending on experience)
• Working days & hours: Monday – Friday; 9am – 6pm
• Location: Joo Koon (2 ways Transport Provided from Boon Lay MRT)
• Benefits: AWS + VB / Lunch & Tea Break Provided

Job Responsibilities:

• Support debt collection efforts and follow up on overdue accounts to ensure timely payments.
• Prepare regular and monthly credit-related reports for the Finance Manager or Head of Department (HOD).
• Monitor and track monthly debt collection performance against targets.
• Investigate and resolve discrepancies related to unpaid invoices, ensuring swift resolution.
• Collaborate with the Finance Manager/HOD to review aged balances and implement follow-up actions.
• Apply and enhance best practices in collection strategies to improve overall effectiveness.
• Recommend and implement improvements to credit risk measures, controls, and processes.
• Evaluate new credit requests and conduct thorough client credit checks.
• Propose and establish appropriate credit terms for new clients.
• Negotiate payment plans and facilitate collections to maintain account health.
• Respond promptly to client inquiries related to credit and collections.
• Build and maintain strong relationships with internal and external stakeholders to support effective credit management.
• Undertake any other duties as assigned by management.

Job Requirements:

• Min. Diploma in Finance or related field
• Min 2 - 3 years of relevant experience would be advantageous
• Proficient in engaging with clients to facilitate effective debt recovery and resolution

Interested applicants please send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be contacted by our consultants.

Align Recruitment Pte Ltd (20C0253)
Rei Lai Yu Wen (R2199207)

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• A Bachelor Degree in Science / Chemical Engineering or equivalent with relevant biopharmaceutical/ pharmaceutical experience.
• Minimum 2 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

The Client is a global aerospace company.

Responsibilities:

• Ensure product and process quality by maintaining the quality management system and complying with relevant regulations and customer requirements.
• Update and improve quality procedures and control instructions.
• Address non-conformance issues with customers, vendors, and suppliers, conduct root cause analysis, and implement corrective actions to minimize quality-related costs.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001 / AS9100 / NADCAP).
• Perform audits of vendors and on-site as needed.
• Adhere to customer and regulatory standards.
• Work to reduce monthly costs associated with poor quality and scrap.

Requirements:

• Degree in Mechanical or Aeronautical Engineering or a related field.
• At least 2 years of experience with ISO9001 / AS9100 Quality Management System and NADCAP.
• Proficiency in problem-solving tools such as fishbone diagrams, FMEA, and the 5-whys methodology.
• Ability to read and interpret technical drawings.
• Strong analytical and communication skills.
• Ability to multitask and attention to detail.
• Familiarity with NADCAP processes like heat treatment, non-conventional machining, shot peening, and chemical processing is a plus.

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Strong organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Strong organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the EICA project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability of specification capability for all I&C related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management in the I & C discipline for the WtE project
• Review the submittals from Contractors for Process Control like Waste Reception system, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Job Requirements:

• A relevant Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).
• At least 10 years of relevant experience in design and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will be considered as relevant.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

The Company

Our client is a leading financial services assurance & advisory team that collaborates to build trust and solve important problems. Work with top-tier clients in the Asset & Wealth Management and Insurance sector, leveraging your expertise in statutory audits and advisory services. This is an excellent opportunity to enhance your skills in a dynamic, technology-driven environment.

The Role

You shall participate in a wide range of statutory audit assignments for top blue chip clients in the Asset & Wealth Management and Insurance space. You are expected to contribute to advisory engagements, including accounting for complex arrangements, internal control reviews, financial due diligence and transaction support.

Your Profile

• Bachelor’s degree in any discipline; professional certifications are a plus.
• At least 2-3 years of relevant audit experience with an international public accounting firm.
• Strong expertise in statutory and regulatory audits for Asset & Wealth Management or Insurance clients.
• Excellent communication and interpersonal skills, with the ability to work effectively in a team.