Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

The Loan Control and Reporting Team is responsible for ensuring the accurate administration and reporting of loan portfolios. This role involves maintaining compliance with regulatory requirements, preparing internal, regulatory & HO reports, and providing insights to support decision-making processes.

Key Responsibilities

• Ensuring efficient execution of offshored processes, overseeing service level agreements, and quality standard
• Develop a robust transaction monitoring and reconciliation mechanism where adherence to service levels and outliers can be identified and resolved dynamically
• Lead collaboration and support to offshore teams.
• Manage operational incidents tracking, prompt issue resolution, root causes identification; Initiate thematic studies to eliminate incident reoccurrences.
• Accurate processing of various transactions adherence to banking regulations, policies, and service level agreements to maintain operational excellence:
• Provide subject matter expertise towards projects initiatives.
• Lead management reporting and data analytics initiatives in the department.
• Initiate ideas towards digitization/paperless processing.
• Assist and support corporate clients, addressing inquiries, and ensuring a positive customer experience
• Proactively manage people development, people engagement, job rotation and succession plans in the team(s).
• Perform any other duties assigned from time to time.

Requirements:

• At least 7 years of relevant experience in Loan Operations and reporting
• Proactive self-starter with the ability to manage multiple tasks and meet deadlines in a fast-paced environment.
• Demonstrate strong leadership and people management skills.
• Exhibit a strong and thorough understanding of loan control, administration, and reporting standards.
• Exhibit initiative to devise strategies, deliver value added support, identify problems & propose solutions.
• Possess strong analytical and problem-solving skills, attention to detail.
• Strong communication and interpersonal skills, both written and verbal.
• Proficient in Microsoft Office Suite.

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software

We are looking for a Quality Control Assistant to support the Quality Assurance Executive in maintaining the highest standard of product quality and safety.

Job Description:

• Responsible for FSMS (GMP, HACCP, ISO 22000, HALAL) monitoring
• Consistent monitoring of quality and specification of product during processing
• Perform inspection for incoming material and outgoing finished product
• Recording and maintaining data for QC information
• Collect samples for product testing
• Report to the department lead on nonconforming products or processes detected

Requirement:

• Physically fit to work in cold room environments with the ability to stand and walk for extended periods.
• WSQ Food Safety Course Level 1 and/or Level 3 certification preferred, familiarity with food/seafood handling and processing is a plus.
• Meticulous with strong organizational and communication skills.
• Strong communication, organizational skills, and ability to walk and stand in a fast-paced cold working environment.
• Proficient in English and Mandarin to interact with Mandarin/English-speaking stakeholders.
• Willing to take up ad-hoc duties assigned by the company.
• Knowledge of SAP will be advantageous.

Job Highlights

• Job Types: Permanent/Contract
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, alternate Sat
• Great learning development opportunities.
• Work-life balance and positive/friendly working environment.

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day

The Business Risk and Control Sr Officer I is a strategic professional who closely follows latest trends in own field and adapts them for application within own job and the business. Typically, a small number of people within the business that provide the same level of expertise. Excellent communication skills required in order to negotiate internally, often at a senior level. Developed communication and diplomacy skills are required in order to guide, influence and convince others, in particular colleagues in other areas and occasional external customers. Accountable for significant direct business results or authoritative advice regarding the operations of the business. Necessitates a degree of responsibility over technical strategy. Primarily affects a sub-function. Responsible for handling staff management issues, including resource management and allocation of work within the team/project

Responsibilities:

• Work with Management on governance and the facilitation of the execution of the Manager Control Assessment (MCA, i.e..Risk & Control Self-Assessment) as required by the MCA Standard including the assessment and appropriate approval of risk associated with business changes.
• Accountable for the quality, completeness, and accuracy of the implementation of the Control Framework, including Risk Control Policy, Control Standard, Issue Management Policy, Lesson Learned Policy and Control Inventory.
• Ensure the identification of issue root cause, partnering with control and process owners to recommend holistic corrective actions and improvements, provide check and challenge to ensure appropriate escalation in according with Issue Management and Escalation Policies.
• Direct teams in the implementation of the Lessons Learned Policy, including monitoring of control breaches and dissemination and learnings across other business units for process improvement to limit the occurrence of similar future events and where similar risk exposure might exist.
• Support management in the review and challenge process, within the FLUs, on the effective design and management of controls to mitigate risks as required by the Control Standards, including implementation and operation, conducting the control monitoring, handling deficiencies, and escalating issues for resolution.
• With management, direct teams on the timeliness, accuracy and completeness of the MCA through controls prior to the execution of a process (QC).
• Assess, with management, the adherence to the MCA Standard through controls after the execution of a process (QA).
• Assist management in exercising control over Operational and Compliance Risk in accordance with established Policy requirements.
• Help management allocate resource to identify, assess, escalate, and manage risk exposures across Risk Categories (Operational Compliance, Strategic, Reputational, etc), including material, emerging and concentration risks in accordance with enterprise Policies and the establishment of Key Indicators to monitor risk exposures.
• Assess, with management, Risk Appetite and monitor / assess exposures against this in accordance with enterprise requirements (if applicable).
• Take ownership to identify, assess, record and response to Operational and Compliance Risk events, ensuring these are captured accurately, timely and in accordance with requirements.
• Responsible that adequate governance and training are in place to support management of Risk profiles.
• Assess, with management, the risks associated with New Activities and changes to the Business, ensuring these are well understood and adequately controlled (if applicable).
• Support management on operational risk scenario analysis and stress testing for Operational Risk Capital requirements.
• Be responsible of risk and control assessments or coordination for programs within various risk stripes and ensure sufficient subject matter expertise exists to enable management of these risks within the Business (e.g. third party, fraud, sanctions etc) (if applicable).
• Take ownership to ensure that risk and control responsibilities and accountabilities are embedded within FLUs, including providing training and leading by example.
• Assist management in guiding and influencing standards and procedures that conform to enterprise requirements and support sound operational and compliance risk management.
• Apply knowledge of the business, products or services to identify and implement control points and processes throughout the business.
• Appropriately assess risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behaviour, conduct and business practices, and escalating, managing and reporting control issues with transparency.

Qualifications:

• 10+ years of experience
• Familiarity with 3rd party risk models.
• Consistently demonstrates clear and concise written and verbal communication skills
• SQL, Perl or Python, Matlab or R, Excel VBA. Database administrator experience is a plus.

Education:

Bachelor's/University degree, Master's degree preferred.

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

Job Description

Whether you’re at the start of your career or looking to discover your next adventure, your story begins here. At Citi, you’ll have the opportunity to expand your skills and make a difference at one of the world’s most global banks. We’re fully committed to supporting your growth and development from the start with extensive on-the-job training and exposure to senior leaders, as well as more traditional learning. You’ll also have the chance to give back and make a positive impact where we live and work through volunteerism.

Shape your Career with Citi

Citi’s Markets business provides world-class solutions and an unmatched global presence. We serve corporates, institutional investors and governments from trading floors in almost 80 countries. The strength of our underwriting, sales and trading and distribution capabilities span asset classes and currencies, providing us with an unmatched ability to meet the needs of our clients.

We’re currently looking for a high caliber professional to join our team as Senior Vice President (SVP), Control Assessment Lead, based in Singapore. Being part of our team means that we’ll provide you with the resources to meet your unique needs, empower you to make healthy decision and manage your financial well-being to help plan for your future. For instance:

• Citi provides access to an array of learning and development resources to help broaden and deepen your skills and knowledge as your career progresses.
• Citi provides programs and services for your physical and mental well-being including access to telehealth options, health advocates, confidential counseling and more. Coverage varies by country.

This position reports to the Markets Control Assessment & Testing Head, within the COO’s Controls Testing Utility. It is a strategic- and execution-oriented management position that is accountable for operational controls performance assessment and assurance for Markets controls as well as monitoring and testing tools. This includes the design and execution of control assessment processes, results reporting, and insight sharing related to the above scope of controls assurance activities. The role is focused on Markets controls to manage Compliance and Operational Risks but will operate as part of a team responsible for control assessment and assurance of all other Markets controls and controls owned by the Markets business segment. Coverage may vary from time to time to meet internal and external deliverables across the Markets Assessment and Testing team.

The Markets – Compliance Risk Control Assessment Lead directs a team of approximately six controls testing professionals responsible for supporting the above responsibilities, with breadth and depth on control assessment planning and execution. The position closely follows the latest trends in controls assurance, appropriate and effective control design, and adapts them for application within their own job and covered businesses. The role will require engagement with senior managers at Director or Managing Director levels.

Excellent management and communication skills are required to negotiate internally, frequently with Business and COO stakeholders. Strong communication and diplomacy skills are required to guide, influence, and convince others, particularly colleagues in other areas and occasional external customers. Accountable for controls testing results and advice regarding the controls execution. The role necessitates a degree of responsibility over technical strategy. Responsible for supporting the Markets Control Assessment & Testing Head on handling staff management issues, including resource management and allocation of work within the team/project.

Responsibilities:

• Supports the Markets Controls Testing Utility by leading a team responsible for assessing control design, designing control assessment tools and developing control assessment procedures, ensuring control assessment transitions, dispositioning exceptions, and developing insights.
• Carries key responsibility for Control Design Assessment (CDA) by influencing the design of the quality review process, defining the work plan, and resolving escalations.
• Performs decision-making of control assessment design activity, which includes approving/signing-off, undertaking escalations, and owning Internal Audit and issue management related actions.
• Has the ultimate decision on controls assessment outlier escalations.
• Handles control assessment interactions with senior managers at Director or Managing Director levels.
• Maintains relationships and drives accountability with partners and stakeholders to drive control assessment success in support of the business's strategy.
• Represents control testing in Operational Risk Forums (ORF) and senior meetings as needed and works with each respective team to finalize materials.
• Works with colleagues in other areas of Risk Management, Compliance/Control, and the Businesses to assure appropriate management of Compliance and Operational Risks applicable to the Markets business.
• Oversees the application of operational risk policies, technology and tools, and governance processes to create lasting solutions for detecting unmitigated risks arising from failed internal processes, inadequate controls, and emerging risks in partnership with Markets.
• Approves assessment procedures in Confluence and is responsible for delivering relevant procedures to Internal Audit reviews and issue remediation.
• Maintains resource forecast for own team as well as forecasting for successful controls assessment transition and Central Execution training. Supports team members on topics ranging from testing design and execution to performance management and control assessment platforms basics.
• Helps driving continuous improvements in accuracy, efficiency, timeliness, and quality of MCA control design assessment testing.
• Develops and drives quality-checking routines to ensure compliance with all relevant policies, operating guides, and owned control assessments.
• Sets ambitious and measurable control testing goals for self and teams that align to business strategy and support business strategy realization.
• Appropriately assesses risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behavior, conduct and business practices, and escalating, managing and reporting control issues with transparency, as well as effectively supervise the activity of others and create accountability with those who fail to maintain these standards.
• Supports other relevant work efforts of department where needed and as directed by their manager.

Qualifications:

• 10+ years relevant experience, 5+ years in Risk & Controls roles, 5+ years of direct or indirect managerial experience.
• Experience managing Compliance and Operational Risks in a first line role, or experience in a second- or third-line assurance or testing role.
• Experienced in Markets products and distribution channels.
• Subject matter expert on controls design, execution and/or control testing.
• Advanced skills in MS Word, MS Excel, MS PowerPoint, and MS SharePoint.
• Effective communication, written and presentation skills.
• Outstanding people and relationship management skills with the ability to influence others and foster a sense of collaboration.
• Demonstrated analytical ability; asks insightful questions, breaks analytical challenges into workable components and draws meaningful conclusions. Well versed in breaking down complex matters into core issues and root causes that can be more readily addressed.
• Independent thinker and able to provide value-adding credible challenge to businesses/functions.
• Proficient in developing new ideas to mitigate risk and improve current processes.
• Prioritizes high impact potential problems effectively. Consistently reads different situations accurately and takes appropriate action to gain senior colleague/ client commitment. Articulates clearly how risk technology supports unit's business, as well as the issues due to gaps between the current technology and known business requirements. Ability to measure and assess the impact of rare-event risks. Well-versed in reviewing the dimensions of risk.
• Demonstrates Leadership skills with an understanding and appreciation for diverse backgrounds.
• Ability to balance strategic priorities with tactical actions.
• Excellent communication skills required to negotiate internally, often at a senior level.
• Experience of human-centered control design an advantage.

Travel Requirement:

• Less than 10% of the time.

Education:

• University degree preferred.

Primary Locations:

• Singapore

KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self disciplin.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Responsibilities

• Conduct Name Screening against Sanction list, Politically Exposed Person list, Internal Blacklist and Adverse News to support KYC Periodic Review Activities.
• Coordinate between relevant parties and stakeholders to complete screening in timely manner
• Ensure that screening assessments are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable.
• Other tasks as assigned by Group Head / Team Lead.

Requirements

• Fresh graduates are welcome to apply
• Able to link diverse information to build a full picture and spot inconsistencies.
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening.
• Strong team player.
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and back office.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

• Manage end-to-end quality control of incoming raw material, in-process monitoring and final inspection of outgoing products involving organoleptic, physical, chemical and microbiological analysis

• Conducts drinking water quality inspection and test monitoring from water treatment process to bottling process

• Conducts daily hygiene and factory housekeeping inspection including production floor, raw material storage and warehouse facility

• Maintains laboratory inventory, equipment tool calibration and maintenance • Perform monthly verification of pest control inspection and documentation

• Handle all new applications and renewal of quality standard certification in compliance to SFA (Singapore Food Agency), FSSC 22000, ISO 22000 Food Safety Management System, HACCP and Halal

• Able to conduct internal factory audits, annual ISO certification, surveillance audits and customer related inspections

• Handles external laboratory testing of source water and product drinking water in compliance to SFA standards

• Manage and investigate product complaints by customers and ensure closure in accordance with company guidelines and external regulatory requirements

• Manage risk-management procedures and report recurring issues to management and product development

• Oversees quality management compliance, customer quality index and quality control operations

• Conducts annual management review on quality system involving quality performance index, plans and improvements

• Provide training and support to relevant team on systems, policies, procedures and core processes

• Any other duties assigned by Superior

Requirement:

• Proven working experience as a QC / QA in Food Factory for minimum of 3 years

• Diploma / Degree preferred. Advantage for candidates with Certifications such as Quality Auditor, Quality Engineer, Quality Improvement Associate and Six Sigma

• Quality inspection, auditing and testing experience

• Highly motivated, self-driven and able to work in a team

• Meticulous, Independent with good communication skills, interpersonal and leadership capabilities

• Problem solver with a strong analytical mindset

• Able to multi-task

• Experience with implementation of corrective action programs

• Strong computer skills including Microsoft Office, QA applications and databases

• Knowledge & experience of data analysis tools, concepts and methodologies of QA

• Knowledge of relevant regulatory requirements

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Key Responsibilities

• Identify, develop & follow-up on new sales leads for corporate training products and consultancy services.
• Responsible for end-to-end account business planning including research, documentation, account planning and internal coordination to ensure that each account has a clear and actionable plan that best meets the client’s needs.
• Maintain and grow revenue streams by developing and maintaining relationship with clients to ensure maximum revenues generation over the long term.
• Manage delivery of consultancy and training projects including client expectation and satisfaction. Ensures that clients receive products and services to agreed standards of quality and on time by effectively managing and monitoring those who deliver the work and taking corrective action including escalation when necessary to guarantee client satisfaction and sustainable financial results.

Key Requirements

• Bachelor degree in Business Administration, Business Management, Sales & Marketing or closely related field, preferably with past experience in either Human Resource, Quality Management or Organisational Development related work or equivalent experience.
• Prior sales and business development experience in the professional services sector within APAC will be an added advantage. Track record of meeting and exceeding revenue targets.
• Excellent presentation and communication skills and confident in using technology tools to build relationships and engage with clients and prospects.
• A social media presence with a strong follower base will be an added advantage.

• Assist senior surveyors on board tankers and carry out proper reference sampling of various liquid cargoes.
• Assist senior surveyors to perform inspection of loading, unloading and transshipment of bulk liquid product, crude tankers.
• Assist senior surveyors to measure shore tanks and ships’ tanks and ascertain volumes and weights of cargo according to SGS Standard method of calculation.
• Maintenance of equipment, apparatus and bicycle used.
• Perform any other responsibilities as assigned by Management.

Requirements:

• Willing to work long and irregular hours
• Entry level candidates are welcome to apply.
• Willing to work offshore when required
• Able to coordinate and be a team member towards a common goal
• Able to work independently and to coordinate several activities simultaneously
• Able to interact with all levels of management, affiliates, suppliers and clients
• Good communication and interpersonal skills
• Acts quickly and decisively
• Works well under pressure
• Good command of the English language (spoken and written)
• Applies judgment and acts according to the SGS standards of ethics and integrity

Job description

Non-Destructive Testing (NDT) technicians examine structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques. They conduct material tests, interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering, or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound, infrared, and radiographic.

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform corrosion monitoring inspection and coordination with NDT team
3. Submit daily and weekly reports to client on the inspection findings.
4. Perform QA/QC welding inspections at site.
5. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc
6. Provide Lead auditor services for various clients at various manufacturing companies.
7. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have Diploma or bachelor degree in engineering
2. Must have valid API 510, API 570 and API 653 Certificate.
3. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1
4. Must have NDT level II certificates in MPI, PT, UT and RT
5. Must have IRCA QMS lead auditor certification.
6. Must be a Saudi Aramco and Singapore welding society approved welding inspector
7. Must have more than 5 years’ work experience in Shell Bukom.
8. Knowledge in code book like AWS, ASME, API codes
9. Must have a good knowledge about MT,PT,UT,RT Methods.
10. Must having an inspection experience in Exchanger,pressure vessels, Pumps, compressors, valves, well head equipment’s, Tanks and Piping.