Job Description & Requirements

• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitoring and verifying that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Assisting the project proponent in ensuring that all environmental authorisations have been obtained.
• Reviewing and approving environmental objectives and targets and assisting the Contractor in finding environmentally responsible solutions to problems.
• Conducting, surveillance, monthly inspections and detailed audits.
• Compiling and completing checklists in order to aid the surveillance and inspection requirements.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommending the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Keeping a register of complaints on site and recording community comments and issues.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.

Job Requirement:

Registered with National Environment Agency (NEA) and have at least three (3) years of post-registration and practical experience relevant to the scope of works of the contract. Local candidates with LTA experiences will be advantage.

Quality Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead Quality Assurance and Quality Control personnel.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001 and API Q1
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• ISO 9001 and API Q1
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Industry/ Organization Type: Chemicals Distribution and Manufacturing

Key Responsibilities

• Handle all goods' receiving/discrepancies/quality or quantity issue
• Handle all incoming packagings' receiving/discrepancies/ quality or quantity issues\
• Manage all matters related to Stuffing and unstuffing containers
• Assist Production Controller to issue Batch card and MTF
• Assist Production Controller to check FG status/stencil/labelling
• Assist QC team to maintain SDS folder, keep raw material and Finished goods SDS updated
• Assist QC team on product or sample monitoring, update monitoring report
• Assist QC team on new lab blend request, sample retrieval request
• Assist QC team on lab retain sample management and record
• Manage trading goods arrangement to ensure all ready for customer collection or ready for loading
• Bi-weekly stock count, update stock report to Production Controller
• All workers PPE safety check especially weekend work day
• Supervise and manage on production blending processes
• Pre-arrangement of packaging for production
• Manage production raw material checking before production start
• Manage raw material return status before store at warehouse
• Handle production QC testing, issue COA
• Attend to production workers' queries
• Documentation works such as labels checking, documents compiling and filing
• QC check on insect repellent spray filled bottles and boxes
• Regular check on factory and production surrounding to ensure no chemical spillage
• Regular check on production equipment and facilities to ensure work in good condition
• Ad-hoc work assigned by supervisor

Job requirements

• Diploma or Degree in related field such as Chemical Engineering
• Minimum 2 years of experience in laboratory testing is an added advantage
• Willing to perform shift work

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Associate.

Key Responsibilities:

• Work on human-like traffic simulation, with the focus of modeling traffic behaviors from large-scale real-world datasets.​
• The work will involve traffic scene representation, behavior modeling with common sense and prediction, generating road layouts, initializing states of traffic agents, rendering in physical simulators, and experimental validation.

Job Requirements:

• At least have a Masters Degree in Mechanical Engineering, Robotics, Mechatronics, Automation and Control Engineering, Artificial Intelligence (AI), etc.
• Relevant working experience will be preferred.
• Strong background in autonomous driving, simulator, AI, and automation.
• Good communication skills and the ability to work independently and facilitate projects with minimal supervisiont
• Able to contribute to Journal/Conference papers with good presentation skills
• Able to plan and organize well and adhere to deadlines.

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.