Job Responsibility

• Inspect and identify all possible forms of hazards in a work environment.
• Inspect work areas regularly to ensure compliance with workplace safety and health requirements.
• Check equipment to ensure it is in working condition and do not pose any environment health hazard to user or the workplace.
• Provide solutions to address any unsafe practices or act at workplace.
• Conduct risk assessments on work site.
• Prepare reports on workplace safety assessments.
• Take charge of all matters related to environmental health such as:

1. Disease-bearing insects and rodents

2. Proper disposal of construction waste

3. Noise, air and dust pollution

4. Earth littering

5. Siltation of drains

6. Food hygiene in workers canteens if any

7. Any other environmental health matters

• Report these conditions/ situations with recommendations on remedial measures to be taken to prevent recurrence.

Requirement

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 2 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/ Health/ Safety or equivalent.
• Candidate who possess high experience will be considered for senior role.

About the Role

We are seeking dedicated Pest Control Technicians/Supervisors to join our team. In this role, you will safeguard homes and businesses from pest infestations, ensuring public health and safety. Success in this position requires strong technical skills, excellent customer service, and the ability to use your ‘detective’ skills to identify and solve pest problems effectively.

Key Responsibilities

Customer Engagement:

- Speak with customers and genuinely listen to their concerns.
- Educate clients on preventive measures and exclusion methods to minimize infestations.
- Ensure strong customer service with follow-ups as needed to guarantee satisfaction.

Inspection and Problem Solving:

- Conduct extensive inspections to identify pest issues and underlying causes.
- Use problem-solving skills to develop and implement effective exclusion methods.
- Provide tailored recommendations for long-term pest control solutions.

Pest Control Operations:

- Apply pesticides when and where necessary, following strict product label instructions and NEA regulations.
- Utilize baiting and monitoring systems to track and manage pest activity.
- Operate and maintain pest control equipment such as sprayers, foggers, and dusters.

Team Collaboration:

- Work effectively with office personnel and the sales team to meet customer needs.
- Maintain accurate service reports and documentation to support operational efficiency.

Safety and Compliance

- Adhere to all safety standards, including proper use of personal protective equipment (PPE).
- Comply with NEA guidelines for pesticide handling and storage.
- Stay updated on industry best practices and regulatory changes through regular training.

Requirements

Qualifications:

- Valid NEA Vector Control Technician (VCT) license.
- Valid Class 3 driving license.

Skills and Attributes:

- Excellent communication and interpersonal skills.
- Strong attention to detail with a proactive problem-solving mindset.
- Ability to work independently and manage time effectively.
- Physically fit, capable of lifting up to 20kg, and comfortable working in confined spaces.

Experience:

- Prior experience in pest control or related fields is a plus.
- Familiarity with Integrated Pest Management (IPM) principles is advantageous.

Why Join Us?

- Gain valuable training and certifications in pest control.
- Opportunities for career progression to supervisory or managerial roles.
- Be part of a supportive and professional team environment.

- Incentives will be given and earnings around $3,200 to $3,800 is possible

Details of the Division and Team:

The APAC Head of Risk, Regulatory and Controls is a senior 1st line of Defence (1LOD) role accountable for leading technology risk reduction strategy and protecting the Bank’s Licence to operate through compliance and adherence to technology regulations across the 14 APAC countries managed by the APAC Country Technology Management (CTM) division.

This includes proactive risk management and timely resolution of risks and regulatory issues, leads problem solving for complex issues, ensures regulatory compliance, deploys and/or enhances risk management related processes, and promote sustainable approaches to risk and regulatory resolution together with senior and global functional stakeholders. The candidate will also be accountable for the oversight of internal / external inspections, remediation assurance, and establishing risk culture and control strategies.

This role will also act as an advisor to the APAC technology senior management – including appropriate necessary escalations for policy / regulatory breaches - and will be an independent regional contact point that ensures IT regulatory and control topics are strategically addressed, have the appropriate sustainable controls in place, etc

What we will offer you:

A healthy, engaged and well-supported workforce is better equipped to do their best work and, more importantly, enjoy their lives inside and outside the workplace. That’s why we are committed to providing an environment with your development and wellbeing at its center.

You can expect:

• Flexible benefits plan including virtual doctor consultation services Comprehensive leave benefits
• Gender Neutral Parental Leave
• Flexible working arrangements
• 25 days of annual paid leave, plus public holiday & Flexible Working Arrangement

Your key responsibilities:

The successful candidate will have the opportunity to:

• Challenge risk and control weaknesses tactfully, and provide advisory to senior management and/or business lines for sustainable risk remediation options, or strategies arising from gap assessments, identified weaknesses or events, etc.
• Lead and establish regulatory / audit engagement frameworks, oversight and processes across APAC to deliver consistent and timely audit and regulatory responses
• Establish and lead proactive management, and the timely resolution of risk and regulatory findings and related remediation activities
• Develop and lead structured problem solving for control issues, and ensuring resolution plans are strategic and sustainable against commercial viabilities Chair and/or lead risk forums to govern overall risk and regulatory portfolio, and effective operational risk management processes
• Actively contributes to the design of risk and control programmes and policies with 1LOD and 2LOD functions, and in line with defined risk and control strategy, and risk appetite / tolerances
• Deliver strategic and automated solutions to link technology controls and processes to technology-relevant regulations and policy offices, including the digitalization of regulatory assessments
• Establish IT Regulatory risk and Control Framework for APAC, working with global colleagues to deliver governance, risk management and compliance (GRC) for technology controls
• Establishes positive risk culture and drives behavioral change

Your skills and experience:

• Minimum 10 years of total working experience, with at least 6 years in technology risk and / or regulatory management
• Proven track record with Technology regulatory adherence / assessment and Technology Governance
• Strong understanding and/or familiarity with APAC technology regulations related to financial institutions (e.g., MAS, HKMA, RBI, BNM, OJK, etc.)
• Proven track record with any of the following:
• Proven track record with any of the following::
  o Independent finding validation and assurance
  o Audit / regulatory inspection management
  o Technology risk assessment
  o Audit or regulatory-related strategic transformation / remediation projects
  o IT controls / GRC platform, framework, and processes
• Excellent communicator with the ability to articulate complex topics that leads to effective resolution to a wide audience across multiple regions, divisions, and business lines Candidates with background in excellent independent problem-solving skills for diverse issues Tactful, independent, self-motivated and pleasant personality

Role is required to be performed on-site at One Raffles Quay office. Relevant vaccination requirement applies.

How we’ll support you:

Coaching and support from experts in your team A culture of continuous learning to aid progression A range of flexible benefits that you can tailor to suit your needs Training and development to help you excel in your career Coaching and support from experts in your team

About us and our teams:

Deutsche Bank is the leading German bank with strong European roots and a global network. click here to see what we do.

Deutsche Bank & Diversity:

We strive for a culture in which we are empowered to excel together every day. This includes acting responsibly, thinking commercially, taking initiative and working collaboratively.

Together we share and celebrate the successes of our people. Together we are Deutsche Bank Group.

We welcome applications from all people and promote a positive, fair and inclusive work environment.

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Mon to Fri 8.30am - 6pm

Position Summary

This position play a critical role in driving compliance and quality programs for Healthcare Transportation & Facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Job Scope

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company’s Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Design & implement robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead & prepare for regular audit programs / random checks / regulatory activities to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and resolve issues via conducting root cause analysis.

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead the validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

12. Depot Support: Provide secondary / backup support to healthcare specialists for market depots.

Requirements :

1. Hold local pharmacist license

2. Have at least five (5) years of relevant experience in warehouse, quality + QMS for pharmaceutical / healthcare industry

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits for regions

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local or Australia’s institute.

7. This position require to communicate with counter part in China

8. Occasionally travel is required to sites and region warehouses.

Competency

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

KEY DUTIES AND RESPONSIBILITES:

· Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.

· Preparation of reagents/diluents/ dissolution media as per STP.

· Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.

· Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.

· Ensure implementation of SOP for all corresponding activities.

· Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.

· Ensure real time documentation, maintain data integrity and appropriate traceability.

· Assist in maintenance and calibration of test instruments per specifications.

· Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.

· Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.

· Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.

· Responsible for QC lab and equipment/instrument cleanliness.

· Responsible for procuring and receipt of QC lab glassware and consumables.

· Any other activities as and when assigned by the Superior.

EDUCATION:

· Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

· (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.

· (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

KNOWLEDGE & SKILLS:

· Possess working knowledge of GMP in the pharmaceutical industry.

· A good team player with positive learning attitude.

· Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self discipline.

• MNC Company
• Basic $2500 - $3200 + Allowance + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Training provided for those without/lesser experience

Job Responsibilities:

• To perform routine analysis of polymer testing & wet chemistry analysis
• To ensure that tests assigned are performed in a timely manner in accordance with validated test protocols and procedures
• To perform instruments’ calibrations, maintenance, and troubleshooting
• To perform housekeeping and maintain the cleanliness in the laboratory
• To perform inventory check & improvement idea in the lab
• To assist superiors with non – routine study samples and any other tasks assigned

Requirements:

• Diploma in Chemical Process Technology / Chemical Engineering
• Willing to work overtime when required

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

You will be part of the dynamic team that is a vital part of the division’s Service Quality Framework. You will liaise with Group Customer Advocacy (GCA) and coordinate with them on the surveys received. You will analyse and identify customers’ pain points (Detractors) or compliments (Promoters) based on customers’ verbatims. This is to ensure that the customers’ experiences are maintained at the professional level set by the management of Client Bank.

Major responsibilities include:-

• To extract the leads and send it to GCA Team daily.
• Surveys received will be via P-Web, SMS,IVR etc.
• After GCA download daily responses, map the responses to customer data and compile listing of “Detractors” including verbatim, these will be forwarded to the NPS champion to follow up with the customers and to close any loops.
• To work as the main custodian managing NPS while overseeing the NPS functions for our Mass market customers who are managed by our stakeholders.
• Perform follow up/service recovery calls for detractors with 0 to 4 rating and customers who gave negative comments in the verbatim.
• To understand the Voice of the customers (VOC) and place the correct tagging for reporting purposes.
• Perform other duties as assigned.

Requirements:
· A university degree holder or pursuing a degree in any discipline with a minimum 2 years experience preferably in a customer centre or financial services environment.
· A strong customer service mindset with good communication and customer centric drive to improve customer experience.
· Bi-lingual in English and a second language (preferred).
· Possess strong interpersonal skills and able to work independently and as a team.
· Analytical skills to drive call quality improvements and suggest process improvements.
· Familiar with banking and/or credit cards process and products, systems.
· Proficient in Microsoft Excel and Microsoft Office applications.
· Prior experience as a Bank's Call Centre Agent/TM for at least 2 years and must be universally-trained.

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

JOB SUMMARY

• The CFCC Control Room owns the Group Transactional Conflicts and Information Walls Standard (TCIW), Group Personal Account Dealing Standard (PAD), Group Outside Business Activities Standard (OBA), Group Close Financial Relationships Standard (CFR) and External Employee Connections Standard (EEC) which set out procedures for transactional conflicts clearance and employee declarations required to help the Group manage any actual, potential or perceived areas of conflicts of interest that may arise in the course of providing financial services to its Clients.

RESPONSIBILITIES

• Responsible for assisting the Head of Control Room, Asia, to oversee CFCC Control Room matters affecting the region (ASA and GCNA)
• Managing and acting as the first point of escalation for a team of CFCC Control Room analysts located in Singapore and Kuala Lumpur (“Asia Control Room”).
• Playing a leading role in coordinating with CFCC Control Room colleagues globally located in London and working closely with other CFCC colleagues globally including the Private Side advisory teams. Ensure that Asia regulatory and business requirements are reflected in global procedures, policies, processes and that the appropriate standards are adopted.
• Participating as an active member of the Control Room Leadership Team and helping with the overall management of the CFCC Control Room team globally.

Primary areas of responsibility include managing and performing the following core functions owned by the CFCC Control Room:

• Clearing and managing transactional conflicts of interest and acting as the first point of escalation for the Asia Control Room
• Maintaining of the Group’s Watch and Restricted Lists
• Tracking transaction flows and timetables, pipelines and inside information held by various businesses and functions within the Group
• Managing the Group’s Information Walls, including executing wall crossings where appropriate
• Performing of preclearance review for research publications to ensure compliance with legal and regulatory obligations
• Maintaining of research disclosures
• Ensuring control sample testing is developed, maintained and completed in a timely manner within the Operational Risk Framework
• Providing training to CR analysts in line with the team’s DOIs, ensuring that each analyst receives the required training and is adequately equipped to ensuring that the DOIs capture the workflow of the teams accurately and in sufficient detail
• Reviewing escalations of preclearance requests of staff relating to clearing Outside Business Activities, Personal Account Dealing, Close Financial Relationships and Employee External Connections
• Reviewing and advising on escalations relating to potential breaches of the Standards owned by the CFCC Control Room.

Strategy

• Support and implement the vision, strategy, direction and leadership for CFCC for Global Credit Markets and other businesses, consistent with the vision and strategy for the CFCC function and in support of the Bank’s strategic direction and growth aspirations.
• Promote the culture and practice of compliance with compliance standards (including conducting business within regulatory requirements, and to high ethical standards) within the Bank and embed a Here for good culture and the Group Code of Conduct

Business

• Build and maintain an effective and constructive relationship with all key business and functional stakeholders that is based on trust, capability, and integrity, providing timely, responsive and quality regulatory compliance advice and guidance to enable the business and functions to meet/ achieve their strategic tactical objectives.
• Provide robust challenge to all relevant business stakeholders where activities are outside of the risk tolerance / appetite, escalating as necessary, until appropriate oversight and ownership is achieved including actions and plans to address any remedial action needed to come back within risk tolerance / appetite.
• Work closely with the business to provide timely compliance advice to ensure compliance with all relevant laws and regulations and policies and standards, support the transition to proactive and preemptive compliance and conduct risk mitigation.

Processes

• Establish and maintain effective processes (including training, advice and support) to ensure that policies, procedures and standards to address compliance risks (excluding financial crime) are effectively implemented and adhered to across Global Credit Markets and other businesses.
• Provide support and challenge to the Bank’s senior management to ensure that they establish and monitor appropriate processes for compliance with compliance policies, procedures and standards (including meeting regulatory obligations and maintaining high standards of conduct).

People & Talent

• Good presentation skills, data analysis, analytical skills and data reporting.
• Good communication skills (written and verbal) and interpersonal skills with an ability to interact with all levels of management and staff.
• Ability to prioritize, multitask, work under pressure and handle confidential and sensitive information in a professional manner in a fast paced deadline driven environment
• Drive performance in compliance service delivery with highest quality of service.
• Assist Process Owner to establish, govern & maintain work processes to drive service performance

Risk Management

• Ensure effective management of compliance matters, and in collaboration with the rest of the CFCC team, effectively manage regulatory issues that have a significant impact on the Bank.
• Collaborate with the other Products CFCC teams and the Compliance Management Group to anticipate horizon risks that may have a significant impact on the Bank and develop effective strategies to mitigate such horizon risks including global standards for conduct of business.
• In the event of serious regulatory breaches, or where risk tolerances have been breached, ensure senior management in the Bank and relevant regulators are informed and that actions are taken quickly to remediate and/or activities are ceased. Ensure proactive and timely identification, assessment, advice and dissemination of evolving regulatory changes/practices and associated risks, and proactive engagement in regulatory reform.
• Assist and work closely with Shared Investigative Services (SIS) and Surveillance and Monitoring teams in relation to investigations and breaches concerning the relevant businesses.
• Ensure global standards are understood and implemented, with any identified exceptions, or need for more/less stringent standards escalated to senior CFCC Compliance Management for joint decisionmaking.
• Maintain adequate management MI / trackers across all aspects of their coverage and responsibility to ensure all issues and matters are tracked, followed, regularly assessed and reported on.

Governance

• Within the Group's overall Risk Management Framework, establish and maintain appropriate risk based compliance frameworks for identifying, assessing, managing, monitoring, mitigating and reporting compliance (including regulatory and financial crime) risks across the relevant businesses.
• Help to Develop and assist in recommendation (for approval by the relevant Risk Committee), appropriate compliance policies and procedures.
• Ensure appropriate product governance measures are in place so that product approval documents reflect all relevant regulatory requirements.

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance matters

Key Stakeholders

• Global Credit Markets business teams including Financing Solutions, Financing Risk, Leveraged and Acquisition Finance (LAF) and Capital Markets
• Mergers & Acquisitions business team
• Legal teams for the above businesses
• CIB Client Coverage
• Credit and Portfolio Management
• Group Corporate Development and Strategy
• SC Ventures
• Group Internal Audit

​​​​​​​Other Responsibilities

• Embed Here for good and Group’s brand and values in Global Credit Markets and other business teams.
• Perform other responsibilities assigned under Group, Country, Business or Functional policies and procedures.

Our Ideal Candidate

• 7+ years of work experience in the financial industry, preferably in compliance or other risk and control functions or in transaction related roles in the Control Room
• Banking knowledge in terms of customers, products, transactions and operations
• Excellent communication skill both articulation and writing
• Good attention to detail and ability to prioritize, multitask, work under pressure and handle confidential and sensitive information in a professional manner in a fast paced deadline driven environment
• Data & analysis skills: able to manage data exceptions and analyse trends and out of pattern activities, working knowledge of the Internet and MS Office Suite & independently assimilate, analyse, and evaluate information from disperse data sources to determine a course of action (e.g. case closure or escalation), and record and communicate this decision clearly and concisely.

Role Specific Technical Competencies

• Manage Risk
• Manage People
• Compliance Policies and Standards
• Compliance Advisory
• Investigations
• Manage Change

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

Remuneration: Basic up to S$3,600 + PB (~3 months)

Location: Newton

Working hours: Mon-Fri, 8.30am to 5.30pm

Job Description:

• Making collection calls
• Timely and effective collection of all debts and customers payments
• Negotiating re-payment plans
• Liaising with lawyer to follow up on the legal action taken against the bad paymasters
• Liaising with vehicle repossesses to follow up on repossessed vehicles
• Maintaining contact with clients to ensure outstanding balance are clear for payment
• Resolving queries both internally and externally around customers outstanding balance
• Posting and allocating daily receipts to accounting systems

Job Requirements:

• Must have knowledge of hire purchase cases and hire purchase operations, legal recovery, experience in going through the whole cycle of legal process of debt collection
• Ability to advise on what legal action is best at different stages of debt collection
• Ability to establish and maintain good client relationships, both internally and externally at all levels
• Ability to reconcile complex accounts and have excellent attention to detail
• Diploma / Degree, At least 2 years relevant experience
• Bilingual in English and Mandarin in order to liaise with Mandarin speaking stakeholders

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Your new company

My client (East area) is a global leader in sensory innovation and has established a strong reputation as a trusted supplier of high-quality acoustic components.

Your new role

They're seeking an experienced Quality Management professional to lead their team in ensuring exceptional product quality and driving continuous improvement. As a key member of their leadership team, you will oversee the implementation of their Quality Management System (QMS), including ISO 9001 and ISO 14001 certifications.

Below are some of the key responsibilities for the role;

• Develop and maintain a robust QMS that meets international standards and customer requirements
• Lead and manage a team of quality professionals to ensure effective quality inspection and control
• Collaborate with suppliers to ensure the quality of raw materials and purchased parts
• Drive continuous improvement initiatives to enhance product quality and process efficiency
• Communicate effectively with stakeholders, including customers, suppliers, and internal teams

What you'll need to succeed

The successful candidate, should have;

• Bachelor's Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the Manufacturing or Machining industry
• Proficient in Office software, Minitab, and Six Sigma methodologies
• Strong knowledge of ISO 9001 and ISO 14001 quality system certifications
• Fluent in English and Mandarin with excellent communication skills, to liaise with stakeholders in China

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a team that's dedicated to innovation and continuous growth
• Working with the latest technologies, tools, and methodologies to develop innovative solutions

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

We are hiring Contract Quality Engineer to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Support Validation Projects: Assist with qualification and validation activities, ensuring compliance with company procedures and regulations.
• Review and Approve Documents: Review and approve validation documents like protocols, reports, and procedures.
• Manage Discrepancies: Identify and address issues in validation protocols, ensuring corrective actions are documented.
• Act as Quality Representative: Participate in cross-functional projects as the Quality Systems and Validation representative.
• Provide Validation Expertise: Offer guidance on creating or updating validation documents, such as for analytical instruments and methods.
• Ensure Document Readiness: Ensure all qualification/validation documents are clear and inspection-ready.
• Support Ongoing Validation: Oversee the Master Validation Plan and support routine qualification activities.
• Collaborate Across Sites: Help standardize validation processes across multiple sites.
• Train and Coach: Develop training materials and provide support to team members and other departments.

Job Requirements

• Bachelor’s degree in Pharmaceutical Sciences, Life Sciences, Biology, Biotechnology, Chemistry, Chemical Engineering, Engineering, or related field.
• At least 2-3 years of experience in quality assurance, manufacturing operations, or validation in the pharmaceutical or biotechnology industry. Experience in equipment, process, cleaning, and computer systems validation is preferred.
• Strong understanding of FDA/EU cGMP requirements, including CFR 21 Part 11, and familiarity with PDA and ISPE GAMP guidelines.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Responsibilities

• Internal and external excursion management (MRB / Quality Claims)
• Customer data reporting
• Conduct Quality related training
• Support customer survey and audits
• Continuous improvement activities

Requirements

• Degree in Engineering or Science
• Minimum 2 years relevant experience
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a team player
• Auditing experience is a plus
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is a plus
• Understanding of system flow and database; basic IT knowledge is a plus

Responsibilities

• Responsible for internal and external excursion management (MRB or Quality Claims)
• In-charge of customer data reporting
• Conduct quality related training
• Support customer survey and audits
• Responsible for continuous improvement activities
• Other Adhoc duties assigned

Requirements

• Degree in Engineering or Science
• Min. 2 years relevant working experience is required
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a good team player
• Proficient in Microsoft Office
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is preferably
• Auditing experience is an added advantage
• Understanding of system flow and database is an added advantage

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Quality Technician (Jurong Island)

Responsibilities

• Support production shift team with sample testing
• Cleaning and preparation of sampling apparatus, Ampule, gel bottles and other laboratory glassware.
• Prepare reagent and standard sample for analytical equipment.
• Report abnormalities and support troubleshooting of equipment.
• Review and revise for QC process flow, control plan and SOP of analytical such as non-prime product, process problems and complain.
• Investigate root cause and take corrective action plan.
• Planning for analytical process modification and analytical process change.

Requirements

• Min NITEC or Diploma in Chemical Engineering field or other relevant certificates
• Possess Analytical knowledge and Skills such as gas chromatography, gel permeation chromatography, Fourier infrared analysis, gel analysis, Karl Fischer’s method and titration method) are preferred
• Highly motivated, a team player, with the ability to multitask and project management skills
• Understand quality policy and basic rule.

Interested applicants please submit your resume to [email protected]