Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

About your role

• Design, maintain, and scale testing frameworks, ensuring comprehensive coverage and reliability.
• Integrate with CI/CD pipeline to ensure tests are executed as part of the development lifecycle.
• Utilize testing tools to develop and execute automated and unit tests.
• Manage bug tracking and test case management using Jira, with Zephyr to streamline test planning and execution within the Unity development workflow.
• Develop detailed automated and unit test plans and test cases, and maintain them.
• Optimize automated and unit testing strategies and tools to meet the unique needs of software development.
• Analyze test results,document systematically, and collaborate with the development team for issue resolution.
• Stay informed on the latest testing technologies, and best practices to continuously improve the testing process.

Requirements

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• At least 2 years of experience in QA process.
• Experienced with CI/CD practices.
• Skilled in using Jira for issue tracking, with proficiency in Zephyr for managing test cycles.
• Strong communication abilities and a detail-oriented mindset as a collaborative team member.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

Summary

OxPay Financial Limited is a leading payment company in Asia listed in the Singapore Stock Exchange. Its subsidiary, OxPay SG Pte Ltd is an MAS-licensed Payment Service Provider. Together with licensed payment subsidiaries in Malaysia, Thailand and Indonesia, the Group aims to become an ASEAN payment powerhouse by expanding to more countries in Southeast Asia.

We have an opportunity to invite a talent to join our exciting growth journey as a Quality Assurance Lead (Fintech Payment). The person will be part of the team to assist and roll-out strategies and procedures for manual and automation tests of products and ensure the successful deployment of OxPay's products solutions.

Responsibilities

• Meeting with product/software designers to determine quality assurance parameters.
• Serves as the lead to the QA team in designing QA test procedures
• Drafting of test documents and its supervision
• Implementation and overseeing of QA process
• Head of troubleshooting quality issues and modification of test procedures
• Conducting of analysis check on products specifications
• Reviewing reports of the QA team
• Deployment of product into the market making sure that the quality is maintained and successful
• Attends to the quality needs and requests of design team and management

Requirement

• Tertiary qualification in Computer Science, Engineering or a related subject
• Proven work experience in software quality assurance
• Strong knowledge of software QA methodologies, tools and processes
• Experience in writing clear, concise and comprehensive test plans and test cases
• Hands-on experience with automated and manual testing tools
• Solid knowledge of SQL and scripting
• Experience working in an Agile/Scrum development process
• Experience with performance and/or security testing is a plus
• Able work with some degree of understand common technology such as API, Postman, Python, HTML, Javascript
• Outstanding communication skills in written and verbal English; &
• Professional mannerism and proactive working attitude.
• Singaporeans or PRs only
• 5 days’ work week

Skills

• Good understanding of key technology such as API, Postman, PHP, HTML, Javascript, etc
• Provides urgent solution and has good decision-making skills
• Strong organizational and presentation skills
• Leadership skills
• Have experience in mentoring and making sure that the people that you are mentoring are also advancing in their career.

Qualities

• Resourceful
• Proactive to get things done
• Attention to details
• Enthusiastic and positive – ‘can do’ attitude
• Diligent and disciplined
• Desire to continuously make improvements
• Personal integrity
• Excellent customer service
• Long-term planner
• Revenue generating mindset
• Can work well with teams - product design and management

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software

Job Description

1. Supervise a team of QC Officers in all factories.
2. Guide and troubleshoot for any equipment issues, co-ordinate with external service providers Ensure laboratory equipment is calibrated in a timely manner and update calibration records. Assist to keep, control, and confirm formulation and blending procedures.
3. Respond to new and existing customers for inquiries related to quality control Conduct quality testing and communicate product specification issues. Conduct nonconforming material or nonconforming product analysis.
4. Participate in the root cause analysis of nonconforming goods.
5. Follow the instructed corrective actions and preventive actions by superiors. Establish formulation and blending procedures as needed.
6. Keep and monitor retain samples of products
7. Validate COA of raw materials received and communicate any issues to the procurement and Plant Manager Establish, update and issue GHS SDS.
8. Create certificate of analysis (COA) of products.
9. Confirm and provide resources for the laboratory and other QCR needs.
10. Coordinate sample delivery as required by the customer.

Job Requirements

• Min. Degree in Chemistry related field or
• Diploma in Chemistry with minimm 5 years of relevant experience
• Technical Knowledge : Microsoft Officer (Basic) / Good knowledge & skills on QC testing
• Ability to coach and mentor the team

Responsiblities

a) Manage asphalt premix production quality control processes;

b) Conduct regular inspections and testing;

c) Analyse test results and implement corrective actions;

d) Maintain quality control records and documentation;

e) Train production staff on quality control procedures;

f) Collaborate with production and laboratory teams;

g) Develop and implement quality improvement initiatives;

h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:

· Cooperate with employers and follow safety and health procedure;

· Report unsafe acts and incidents;

· Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

· Diploma / Certificate in Asphalt Technology or related fields

· Preferably with relevant experiences

· Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)

· Strong analytical and problem-solving skills

· Excellent communication and interpersonal skills

· Ability to interpret test results and make informed decisions

· Familiarity with quality management systems (ISO 9001)

· Proficient in Microsoft Office and laboratory software

We are looking for a Quality Control Assistant to support the Quality Assurance Executive in maintaining the highest standard of product quality and safety.

Job Description:

• Responsible for FSMS (GMP, HACCP, ISO 22000, HALAL) monitoring
• Consistent monitoring of quality and specification of product during processing
• Perform inspection for incoming material and outgoing finished product
• Recording and maintaining data for QC information
• Collect samples for product testing
• Report to the department lead on nonconforming products or processes detected

Requirement:

• Physically fit to work in cold room environments with the ability to stand and walk for extended periods.
• WSQ Food Safety Course Level 1 and/or Level 3 certification preferred, familiarity with food/seafood handling and processing is a plus.
• Meticulous with strong organizational and communication skills.
• Strong communication, organizational skills, and ability to walk and stand in a fast-paced cold working environment.
• Proficient in English and Mandarin to interact with Mandarin/English-speaking stakeholders.
• Willing to take up ad-hoc duties assigned by the company.
• Knowledge of SAP will be advantageous.

Job Highlights

• Job Types: Permanent/Contract
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, alternate Sat
• Great learning development opportunities.
• Work-life balance and positive/friendly working environment.

• Possess knowledge in GMP and halal certification processes
• Assist in GMP preparation for audit
• Assist QC manager in daily operations
• Testing of finished products against specifications and to notify for any out of specifications
• Maintenance of manufacturing facility as per GMP requirements
• Prepare products for testing from external laboratories
• Conduct instrument analysis and calibration of laboratory equipment and basic equipment maintenance
• Assist in generation of Certificate of Analysis
• Conduct incoming materials check

Requirements

• Minimum Diploma in Chemistry or relevant courses
• Minimum 2 years of experience
• Able to work independently with minimal supervision
• Able to write and communicate in English
• Knowledge in Excel and word
• Knowledge in SAP will be an added advantage

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Quality Control Analyst with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Key Responsibilities:

• Sample storage and management
• Prepare and support analytical testing
• Analytical testing and documentation
• Perform lab housekeeping activities
• Perform administrative documentation
• Comply with all HSE guidelines
• Detect and report potential accident, risks and propose solutions
• Responsible for participating in initial training and retraining

Qualifications:

• Proficient in English.
• Previous experience working in a laboratory environment in the pharmaceutical industry (quality assurance, production).
• Nitec or Diploma holders

This position is for permanent 12-hr night shift, 2-3-2 basis.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job Scope:

• Develop and implement quality control procedures and policies
• Conduct inspections and audits to ensure compliance with quality standards
• Monitor and test materials, products, and processes to verify quality
• Identify and resolve quality issues and non-conformance
• Review project specifications, drawings, and standards for quality requirements
• Prepare quality reports and document test results and inspections
• Coordinate with suppliers and subcontractors to ensure quality requirements are met
• Perform root cause analysis for quality failures and implement corrective actions
• Ensure that safety and environmental standards are followed during inspections
• Train and mentor staff on quality control processes and best practices
• Maintain records of quality inspections, certifications, and test results
• Support project managers in quality planning and control
• Ensure continuous improvement in quality processes and systems

Requirements:

• Engineering degree
• 5+ years of QA/QC experience in construction
• Experience in structural steel or precast RC works
• Strong interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

In this role, you will:

• Engage in one or more projects to boost QC team productivity or digitalization, tailored to your interests and strengths.
• Job shadow and on-the-job training with the QC team to understand cable manufacturing and testing processes.
• Prepare technical reports per customer specifications, documenting data from QC inspections and tests.
• Perform daily tasks including inspections, data entry, report preparation, and other ad hoc duties.
• Assist in QC tests.

Job requirements:

• Basic knowledge in quality assurance or systems and/or process optimization is a plus.
• Skilled in MS Office (Excel, PowerPoint) and practical, hands-on tasks.
• Receptive to feedback and keen to learn from experiences.
• Lead tasks proactively and seek clarification when needed.
• Comfortable working with data.

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond January 2025

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

In this role, you will:

• Job shadow / On-job training with the team to understand cable manufacturing and testing process
• Be involved in QC tests (Incoming Quality Control, In-Process Quality Control, Final Quality Control/Out-going Quality Control)
• Prepare technical reports based on customer’s required specification
• Develop and implement performance improvement and quality assurance programs
• Be closely involved in one or two projects relating to QC team’s productivity or digitalization efforts

Job requirements:

• Strong attentiveness to details as QC data requires accuracy
• Takes initiative in leading a task and will proactively check in when in doubt
• Basic knowledge in quality assurance or systems and/ or process optimization is a plus
• Proficient in MS Office (Excel, Powerpoint)
• Comfortable in working with data

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self disciplin.

Key Responsibilities:

· Implement methods to inspect, test and evaluate products and production equipment.

· Inspect Incoming raw materials’ quality (IQC).

· Ensure that products adhere to quality standards.

· Prepare reports by collecting, analyzing and summarizing data.

· Train and manage production line staff in production practices and quality assessment of goods.

· Track products in WIP (Work in Process) to guarantee that each part of the process is correct.

· Improve Production Yield by ensuring good QA practices and implementing corrective actions.

Qualifications:

· Diploma or higher in Quality Management, Engineering, or a related field.

· Minimum of 5–8 years of experience in quality assurance/control within a Manufacturing, Aerospace, or related industry.

· In-depth understanding of AS9100 or ISO9001, and regulatory compliance frameworks specific to Aviation.

· Experience in Calibration procedures and maintaining Inspection Tools and Systems.

· Excellent problem-solving skills with a keen attention to details.

· Ability to work independently as well as collaboratively within a team.

· Good team player, good attitude, honest, discipline, positive thinking, resourceful, and a good problem solver.

· Excellent communication skills to foster effective teamwork and communication within the operations team and the customers.

How to Apply:

If you are passionate with the Aerospace industry and want to be part of a forward-thinking company at the forefront of the Aviation Industry, dedicated to exceeding customer expectations, and navigating the dynamic Aviation landscape, and where your expertise in Quality Assurance will help shape innovative and reliable Aviation Solutions, we invite you to join REETZ and work with us to take the Company to a new height. Please submit your application to the email address: [email protected]

We are looking for a proactive Quality Assurance Tester to enhance their testing capabilities and collaborate within an Agile framework with a mandatory experience in Temenos 24.

Responsibilities:

• Review and analyze user stories to refine them from a testing perspective.
• Collaborate with squads to develop test strategies and plans.
• Execute test cases, document results, and report defects in an audit-compliant manner.
• Support squads in troubleshooting and resolving defects.
• Assist test engineers in developing test automation solutions.
• Provide continuous feedback by reporting defects and issues in a timely manner.
• Ensure quality throughout the change process in collaboration with squads.
• Improve testing services as part of an ongoing improvement process.
• Conduct post-release testing, production support, and training for support teams.

Requirements:

• Proven experience as a Quality Assurance Tester, preferably in the financial industry.
• Hands-on experience with Agile frameworks and QA methodologies.
• Experience testing both in-house developed and vendor-based applications.
• Strong understanding of functional and workflow-based system design, especially across interconnected systems.
• Solid knowledge of securities lending, repo, and back-office processes:
• Settlement workflows (DVP, FOP)
• Corporate actions and securities positions
• Trading, collateral management, and financial workflows.
• Experience with Temenos T24.
• Proficiency in Jira and testing tools.
• Strong communication skills in English.

This is an initial 1-year contract role. (Perm conversion)

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust Quality Assurance and Regulatory Affairs team that would serve as a key pillar for sustained commercial success. To that end, we are looking for a Quality Assurance & Regulatory Affairs Manager to join us on this journey. You will be part of our fast-growing team and will take ownership of your role from the get-go. You will work on ensuring our company’s commitment to comply with regulatory requirements and to maintain the effectiveness of our Quality Management System (QMS). You will also be in charge of our products’ regulatory strategies and submissions to various regulatory bodies. Your role will enable you to work not only with diverse functions internally but also in close tandem with our external partners such as our suppliers, distributors and notified bodies.

Your responsibilities shall include the following:

• Ensure the company’s QMS complies with ISO 13485 and FDA 21 CFR 820/QMSR.
• Develop and manage Quality Procedures such as document control, CAPA, NCR, Supplier Control, Production Control, Feedback and Complaints Handling, and Post Market Surveillance.
• Organize and execute internal audits, management reviews and supplier audits.
• Plan and lead ISO 13485 audits and regulatory inspections.
• Participate in the products’ verification and validation activities.
• Develop, review and compile the medical device technical files whilst making sure the products meet all regulatory and quality standards.
• Involved in risk assessment tasks to identify potential quality and compliance risks in the product lifecycle and advise adequate risk control measures.
• Serve as the company’s Quality Management Representative (QMR) and Person Responsible for Regulatory Compliance (PRRC).
• Manage and mentor the QARA team to ensure members are adequately trained.
• Stay updated on medical device laws and regulations in the targeted markets.
• Work with senior management to define and deliver adequate quality and regulatory strategies.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Engineering or Science.
• At least 5 years’ experience in quality assurance and/or regulatory affairs in the medical device Industry.
• Firm understanding of ISO 13485:2016, FDA 21 CFR 820/QMSR and ISO 14971.
• Prior involvement in HSA, FDA 510(k)/De Novo and/or MDR 2017/745 submissions will be a plus.
• Experience in generating risk management documentation (risk management plan, report, FMEAs).
• Possess a leadership and strategic mindset to organize and prioritize tasks for effective and timely delivery of regulatory goals to meet the company’s business objectives.
• Certification as an ISO13485:2016 lead auditor will be advantageous.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

We are looking for a proactive Quality Assurance Tester to enhance their testing capabilities and collaborate within an Agile framework with a mandatory experience in Temenos 24.

Responsibilities:

• Review and analyze user stories to refine them from a testing perspective.
• Collaborate with squads to develop test strategies and plans.
• Execute test cases, document results, and report defects in an audit-compliant manner.
• Support squads in troubleshooting and resolving defects.
• Assist test engineers in developing test automation solutions.
• Provide continuous feedback by reporting defects and issues in a timely manner.
• Ensure quality throughout the change process in collaboration with squads.
• Improve testing services as part of an ongoing improvement process.
• Conduct post-release testing, production support, and training for support teams.

Requirements:

• Proven experience as a Quality Assurance Tester, preferably in the financial industry.
• Hands-on experience with Agile frameworks and QA methodologies.
• Experience testing both in-house developed and vendor-based applications.
• Strong understanding of functional and workflow-based system design, especially across interconnected systems.
• Solid knowledge of securities lending, repo, and back-office processes:
• Settlement workflows (DVP, FOP)
• Corporate actions and securities positions
• Trading, collateral management, and financial workflows.
• Experience with Temenos T24.
• Proficiency in Jira and testing tools.
• Strong communication skills in English.

This is an initial 1-year contract role. (Perm conversion)

We are looking for a proactive Quality Assurance Tester to enhance their testing capabilities and collaborate within an Agile framework with a mandatory experience in Temenos 24.

Responsibilities:

• Review and analyze user stories to refine them from a testing perspective.
• Collaborate with squads to develop test strategies and plans.
• Execute test cases, document results, and report defects in an audit-compliant manner.
• Support squads in troubleshooting and resolving defects.
• Assist test engineers in developing test automation solutions.
• Provide continuous feedback by reporting defects and issues in a timely manner.
• Ensure quality throughout the change process in collaboration with squads.
• Improve testing services as part of an ongoing improvement process.
• Conduct post-release testing, production support, and training for support teams.

Requirements:

• Proven experience as a Quality Assurance Tester, preferably in the financial industry.
• Hands-on experience with Agile frameworks and QA methodologies.
• Experience testing both in-house developed and vendor-based applications.
• Strong understanding of functional and workflow-based system design, especially across interconnected systems.
• Solid knowledge of securities lending, repo, and back-office processes:
• Settlement workflows (DVP, FOP)
• Corporate actions and securities positions
• Trading, collateral management, and financial workflows.
• Experience with Temenos T24.
• Proficiency in Jira and testing tools.
• Strong communication skills in English.

This is an initial 1-year contract role. (Perm conversion)

Responsibilities:

• Oversee and maintain all QA/QC documentation, including certificates, test results, inspection requests, and reports on non-compliance.
• Establish inspection standards, manage testing processes, and ensure adherence to high-quality standards throughout project workflows.
• Evaluate materials for compliance with project specifications and work closely with teams to uphold material quality and procurement protocols.
• Manage test and inspection schedules, enforce compliance with procedures, and conduct quality audits across project teams.
• Monitor product quality performance, perform audits, compile monthly reports, and recommend corrective measures to sustain quality benchmarks.
• Assist the project team on QA/QC-related matters.
• Lead the establishment of a new QA/QC department to enhance quality assurance and control capabilities.

Requirements:

• Diploma in Mechanical & Electrical (M&E) Engineering or a related field.
• Minimum of 3 years’ experience in the construction industry.
• Detail-oriented individual with strong analytical and observational skills.
• Proficient in computer applications and possesses solid office administration skills.
• Able to commit to a 5.5day workweek.

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has setup their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Main Purpose of Job:

This new position is responsible for performing production-related inspection jobs, carrying out equipment and calibration, and maintaining documentation and records.

Key Duties & Responsibilities:

· Prepare the lab for ISO 9001:2015 certification audits, including laboratory equipment qualification and method validation.

· Responsible for manufacturing management and quality control (QC) based on the quality assurance system (QAS)

· Design and develop forms, work instructions and methods for testing and evaluation.

· Utilizing knowledge in engineering fields for chemical and product quality inspection.

· Ensure lab equipment/instrument calibration and maintenance are maintained as planned.

· Trend and feedback of monitoring data to relevant sections and drive for investigation and action as necessary.

· Chemical Analysis of products using ICP, X-ray diffractometer, HPLC, FTIR, particle size analyser, UV, Endotoxin test and chloride, sulfate, carbonate limit test.

· Carry out TOC, Endotoxin test, and environmental monitoring tests.

· Carry out maintenance and calibration of equipment. Maintain accurate inspection, maintenance, and calibration of records.

· Perform investigation when the test is out-of-spec or abnormal.

· Prepare validation documents and carry out the qualification of equipment etc.

· Cross function collaboration to achieve compliance with quality requirements, improvements, development and implementation of new products /processes, supporting customer complaints, etc.

· Process explanation and audit support in customer audit

· Corrective and preventive action (CAPA) support

· Perform all other duties assigned by the supervisor or manager.

Education:

Diploma in a scientific discipline or possess equivalent experience or higher.

Experience:

· Five years’ experience in a medical device or pharmaceutical laboratory environment

· Have experience with lab equipment such as HPLC, ICP, FT-IR, UV Spectrometer and environmental monitoring sample testing.

· Familiar with ISO 9001:2015 requirements.

Proficient in Microsoft Word and Excel

Working Conditions:

Work is generally performed within an indoor laboratory environment with adequate temperature. Personal protective equipment (PPE), such as a Laboratory coat, Safety shoes, Appropriate gloves, hearing protection, Respiratory Protection etc., will be required for potential exposure to hazardous chemicals and noise hazards.

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492