Responsibilities:

• To assist to liaise and co-ordinate with LTA, authorities, Consultants and stakeholders.
• To ensure risk assessment and safe working procedure are properly executed on site.
• To conduct daily health, safety and environmental inspections, prepare reports and follow up with Project Safety Team.
• Ensure compliance with environmental regulations, develop environmental control plan & liaise with NEA (such as report submission, etc.).
• Proper documentation of all EHS records, certificates, notice and official related EHS correspondence.

Requirement:

• At least 5 years relevant experience in construction for LTA projects.
• NEA registered ECO.
• Able to work independently with minimal supervision.
• Able to ensure compliance with the latest environmental regulations.

Job Responsibilities:

• Inspect and identify all possible forms of hazards in a work environment.
• Inspect work areas regularly to ensure compliance with workplace safety and health requirements.
• Check equipment to ensure it is in working condition and do not pose any environment health hazard to user or the workplace.
• Provide solutions to address any unsafe practices or act at workplace.
• Conduct risk assessments on work site.
• Prepare reports on workplace safety assessments.
• Take charge of all matters related to environmental health such as:

1. Disease-bearing insects and rodents

2. Proper disposal of construction waste

3. Noise, air and dust pollution

4. Earth littering

5. Siltation of drains

6. Food hygiene in workers canteens if any

7. Any other environmental health matters

• Report these conditions/ situations with recommendations on remedial measures to be taken to prevent recurrence

Requirement

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 2 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/Health/Safety or equivalent.
• Candidate who possess high experience will be considered for senior role.

Overall Purpose of The Job

Supporting the Group Director, Marine Assurance in the continual drive and promotion of the highest standards of service delivery through the effective implementation of the HSSEQ Excellence Charter, V.MS, Assurance programs, audit standards, and associated policies, including accountability for;

• Acting as V.’s subject matter expert on Dry Bulk operations, compliance, and assurance, to ensure V.’s policies, processes, and operating standards remain up-to-date at all times, and are continually improved to meet customer, industry, and stakeholder demands

• In executing above, ensure that V.’s Assurance programs (onshore and onboard) are accurately and consistently reflecting the ‘real world’ demands and expectations of external audit and inspection programs, creating maximum internal learning and improvement opportunities, and overall service delivery performance

• Support in execution of annual Segment Engagement Plans that target customers, stakeholders, and industry bodies, ensuring consistent and proactive engagement that promotes and continually improves V.’s commercial successes within the Dry Bulk segment, globally

• Act as V.’s Group-level representative in Australia, ensuring proactive and effective engagement with AMSA and relevant local authorities, at regular intervals or when required on matters of PSC compliance or incident response

Key Responsibilities and Tasks

Promoting a strong, proactive Culture of HSSEQ Excellence, through;

• Continually providing strong, visible, and proactive examples of HSSEQ leadership

• Promotion of a transparent & value-adding Marine Assurance culture across the Group

• Promotion of outstanding operational standards of excellence, especially to customers & external stakeholders

• Acting as change agent for the continual improvement of the Group’s service delivery performances

Marine Assurance Standards

Provide subject matter expertise on the development and continual improvement of policies, processes, and marine assurance standards for the relevant industry segment, ensuring the V.MS and all associated operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Marine Assurance Programs

Provide subject matter expertise on the development and continual improvement of V.Assurance programs and inspections for the relevant industry segment, ensuring such operational practices meet industry standards and maximise service delivery and commercial success for our customers.

Customer & Segment Engagement

Supporting the Group Director, Marine Assurance in the planning, execution, and reporting of annual Segment Engagement Plans that grow V.s profile and customer engagement in the relevant industry segment, and supports our Commercial activities in remaining proactive and aware of customer and segment needs, and expectations.

PSC & Industry Engagement

Acting as a Group-level leadership representative with AMSA, an other regional PSC regimes as directed, to maintain working relationships at an equivalent level, ensuring V. is continually and proactively engaged in support of safe operations and effective service delivery, and supporting V. Executive Team members in securing and delivering additional such meetings and engagements, as required.

Incident Response

Acting as a Group-level leadership representative in event of incident for the interim period that relevant ShipMan MD/OD can reach the region to engage on behalf of DoC-holding office, and ensure that V.-managed crew and assets are engaged and cared-for during this period, and that V.’s interests are protected.

Incident Investigation

Where directed, provide subject matter expertise in investigation of all incidents where there are Marine Assurance impacts and/or learning opportunities, to ensure we maximise all relevant Marine Assurance learning opportunities, resulting in effective outcomes that drive continual improvement of related systems, processes, and policies.

Desirable

• Deep understanding of and experience in safe operations of Dry Bulk vessels
• Deep understanding of and experience in associated Dry Bulk vetting & inspection programs
• Excellent ability to make, maintain, and grow customer relations with key internal and external stakeholders
• Excellent ability to represent V. and themselves to the highest professional levels in external forums and stakeholder engagement events
• Ability to travel freely to/within Australia
• In-depth knowledge of industry standards, assurance & certification programs
• Significant experience in international compliance & certification programs
• Significant experience in engaging and collaborating with multinational / multicultural teams

Credit Control & Accounts Executive

• Organise and conduct regular credit & AR review meetings
• Follow up and communicate with customers.
• Review and process new customer account applications.
• Maintain and update particulars and credit limits of customer accounts in SAP.
• Monitor daily sales transactions for credit holds in SAP and communicate with sales department to address overdue issues.
• Disseminate or circulate invoices, statements of accounts, reminder and confirmation letters.
• Prepare regular collections and AR status reports for management and for HQ.
• Other adhoc duties assigned by Senior Financial Controller/ Assistant Manager.

REQUIREMENTS

• At least 2-year relevant working experience.
• Proficient in MS software including Outlook, Word, Excel and PowerPoint.
• Communicate with customers and insurer tactfully and professionally.

Basic: Depending on experiences

Location: Walking distance from Circle line (CC line)

Interested candidates are welcome to email resume to [email protected] and CC to [email protected]

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• A Bachelor Degree in Science / Chemical Engineering or equivalent with relevant pharmaceutical experience.
• Minimum 1-3 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to:
[email protected]

Tricia Celestine Goh (R1981653)
Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• A Bachelor Degree in Science / Chemical Engineering or equivalent with relevant biopharmaceutical/ pharmaceutical experience.
• Minimum 2 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Monday - Thursday: 8:30AM - 6:00PM

Friday: 8:30AM - 5:30PM

Job Duties:

• Establish quality assurance deliverables for stories in upcoming iterations/sprints, for functional and non-functional test areas.
• Work closely with development team to conduct testing of modules developed for integration of BGP to GMS and enhancements to GMS.
• Work with line division to onboard and review new AORs onto BGP.
• Other Admin/Operational support where required.

Requirements:

• Degree in Computer / Computer Science, Electronics and Computer Engineering, Information Technology or equivalent.
• Minimum least 3 years of quality assurance/testing experience
• Experience in Agile development and testing methodologies
• Testing certifications is an advantage (eg. CSTP, CTAL)
• Organised and meticulous in planning, managing and executing testing activities
• Ability to analyse test results and explain the findings and corrective actions required clearly and concisely.
• Team player who is proactive, quality-conscious, customer-oriented and results-oriented.
• Excellent writing, communications, stakeholder engagement and presentation skills

Please contact Terence at +65 9645 4048 your resume directly for fast response.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R23116141 Le Cong Thang

The Service Quality Associate (SQA)act as the media between internal partners and residents as well as their families. The SQA is to maintain high standards of care and service delivery, promoting residents’ well-being, and ensuring a conducive living environment for residents, through gathering feedback and working with internal partners.

Work Location: Senja Care Home

Client Care Management

• Act as the point of contact to interact and gather feedback from residents and their families to understand their needs and preferences.
• Work towards resolving issues and ensuring a positive outcome for all parties involved.
• Collaborate with internal partners within the care home to ensure a cohesive and collaborative approach to resident care and service delivery.
• Identify and share areas of improvement and provide recommendations.

Training and Activity Management

• Coordinate and deliver in-service talks to residents and staff.
• Encourage residents to participate in activities and events for their health well-beings.

Service Quality

• Monitor and evaluate the quality of care provided to residents by conducting regular assessments, audits and surveys.
• Identify areas for improvement and recommend strategies to enhance the quality of services.
• Implement initiatives to enhance resident satisfaction and improve the overall resident experience.
• Prepare reports for management and regulatory agencies as required.
• Ensure that the care home complies with all relevant regulations, policies, and procedures. Stay abreast with industry standards and best practices to maintain compliance.
• Escalate to HOD or Senior Management Team (SMT) for feedback that warrants immediate attention or has insinuation of escalation to public forum or media.
• Track all visits, feedback, recommendations and report at Vanguard Rehab and Clinical Meeting (VRCM) platform or any other platforms when necessary or required.

Administration

• Maintain accurate records of quality assurance activities, resident feedback, and compliance measures.

Requirements

• Diploma / GCE “A” level / GCE “O” level / GCE “N” level in a relevant discipline
• Possess at least 1 - 2 years working experience in Service Quality function or quality improvement programmes in healthcare or similar setup.
• Those with experience in Nursing Homes and/or long-Term Care Facility would be preferred.
• Ability to interact in at least 2 of the languages/dialects such as Malay, Mandarin or Tamil to communicate with the clients and families.
• Effective interpersonal, engagement and follow-up skills
• Detail-oriented
• Passion for quality and ageing issues
• Good written and verbal communication skills

Responsibilities & Requirements:

The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset (Must have)

• Proven experience as a Software Test Engineer or similar role.

• Proficient in JSON, API, and SQL.

• Experience in regression and end-to-end testing.

• Strong problem solving skill and attention to detail.

• Excellent communication skill.

• Ability to learn quickly and work in a fast-paced environment.

• Experience in writing clear, concise, and comprehensive test plans and test cases.

• Willingness to support BAU operations as needed.

Skillset (Good to have)

• Familiarity with financial instruments and entities.

• Experience with performance testing.

• Knowledge of Agile/Scrum development principles.

• Experience with automated testing tools.

• Understanding of coding and scripting for automation purposes.

• Knowledge of continuous integration and continuous delivery (CI/CD) processes.

• Familiarity with version control systems like Git.

• Knowledge of software QA methodologies, tools, and processes.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Description:

• Conduct DFM for parts manufacturing
• Perform FPA (First Part Approval) for mechanical parts
• Review parts manufacturability and parts design before tooling fabrication
• Generate FPA report, update status and results and share with internal staff and suppliers
• Identify CTF dimensions to be included in Incoming Inspection
• Prepare of Incoming Inspection instructions for parts that require inspection
• Investigate production fallouts due to part quality, collect data and study for root cause and countermeasure
• Work with supplier on improvement of parts quality activities
• Perform periodic factory audits on vendor capabilities, facilities, processes and prepare audit reports

Job Requirements:

• Candidate must possess at least Bachelor's Degree in Electrical Engineering or equivalent
• Preferably have 1 year of working experience but candidate with no working experience is welcome to apply too
• Knowledge in stamping, Plastics Moulding & Machining processes
• Self-motivated and able to meet deadlines
• Proficiency in Mandarin in order to liaise with China suppliers
• Willing to perform overtime when required

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

Key Responsibilities/Duties

• Engage project team and sub-contractors to deliver high quality works and ensure all temp works and permanent works done are in full compliance with LTA M&W Sep and PS clauses.
• Effectively implement GBSB's Project Quality Plan on site.
• Conduct internal Quality Audits, arrange site quality inspection and materials inspections with QPS.
• Liaise with authorities to achieve acceptance in materials submission, site quality inspections, documentation and compliances.
• Provide training to site staff on the deep understanding of quality standards, hold points and specifications for the site activities in advance.

Requirements:

• Degree in Civil Engineering or equivalent
• Minimum 5 years of relevant engineering experience for LTA MRT projects

At #TeamCPF, you’re not just joining a team; you are embracing a culture of excellence, collaboration, and meaningful impact. You will play a pivotal role in empowering over 4 million members to secure their retirement, healthcare, housing needs and better navigate life’s uncertainties.

We thrive on sharp minds and insightful decisions. Your ability to analyse and think critically isn't just valued; it's essential. Every choice you make contributes to our collective success.

Collaboration is our way of life. We believe in the power of effective partnerships and seamless communications across teams. Together, we amplify each other’s strengths and achieve remarkable results.

Our learning never stops. We encourage your inquisitiveness and courage to embrace new challenges head-on. Your agility, readiness to challenge conventions, embrace of data-driven strategies, dedication to learning and applying new skills fuels our innovation and progress.

At the core of everything we do lies a genuine desire to make a difference. We serve our community and support each other with compassion, empathy, and unwavering dedications. Every action we take is guided by a deep sense of purpose and a commitment to those we serve.

Join us at #TeamCPF! Together, let's redefine possibilities and leave a legacy that echoes for generations.

What you will be working on

As a part of the Service Quality Management team, you will be responsible for implementing and managing the Board’s Customer Relationship Management System (CRMS) that is used by both frontline and backend departments to handle correspondences with our customers. You will play a role in ensuring the successful deployment and integration of systems to enhance service quality and improve customer experience.

In this role, you will:

• Serve as the primary liaison between business teams, overseeing project progress and gathering feedback.
• Collaborate with stakeholders to define clear business requirements and ensure smooth integration of systems.
• Participate in testing to ensure system readiness and alignment with standards, and provide post-implementation support.
• Troubleshoot and resolve project blockers in collaboration with IT colleagues and vendors.
• Harmonise business processes to accommodate changes from the new system.
• Support change management communications and training plans for internal users during the transition phase.
• Provide training on new digital capabilities to deliver accurate information to customers.
• Identify gaps between systems and business needs for future enhancements.
• Review and streamline policies and processes based on emerging technologies and methodologies to keep abreast of market practices.

What we are looking for

We value the diverse talents and experiences that each individual brings to the table. While mastery of every requirement may not be necessary, familiarity and expertise in some of the following areas will position you for success within this team.

• Relevant experience in project management or operations management, preferably in a customer service or digital transformation environment.
• Familiarity with managing and implementing enhancements to improve processes and increase productivity/efficiency would be advantageous.
• Knowledge of CRMS platforms, such as Salesforce, will be an added advantage.
• Relevant strong experience with testing methodologies and quality assurance processes.
• Demonstrate strong communication and stakeholder management skills.
• Ability to work collaboratively in a cross-functional team environment.
• Ability to collaborate and communicate with stakeholders to ensure alignment and successful project outcomes.

The successful candidate will hold the corporate title of Manager/Senior Manager, with seniority based on individual work experiences.

Position is on a 1-year full-time contract directly under the payroll of CPF Board with an option to renew, contingent upon confirmation and subject to organisational needs.Additionally, there is potential for emplacement into a permanent position.

What you can expect

Being part of #TeamCPF means embarking on a challenging and rewarding career in a progressive workplace that values productivity and growth. Here’s what awaits you:

• Opportunities to engage in a mix of formal and informal training, keeping your skills sharp in our ever-evolving technological landscape.
• Promotion opportunities based on your capability and on-the-job performance.
• A vibrant community of like-minded and friendly colleagues, where collaboration and creativity thrive.
• A hybrid work model that offers flexibility for remote work, subject to exigencies of service.
• Flexible dress code that empowers you to choose your appropriate outfit for the day.
• A comprehensive rewards package that includes annual leave, pro-family leave, medical and dental benefits, and access to recreational activities.

About Central Provident Fund Board

At the Central Provident Fund (CPF) Board, we believe in developing individuals who are inspired to do their life’s best work, through 3Ps: Purposeful Work, Professional Growth, People & Culture.

Purposeful Work – The CPF Board helps 4 million members save for their retirement, healthcare and housing needs. Beyond being a pension fund, we are unique in being a national social security organisation, and we serve CPF members knowing that we make a difference.

Professional Growth – At CPF Board, you will have the opportunity to learn on the job and pick up new skills and knowledge. Although you are joining one organisation, you will have access to many career paths in the years ahead.

People and Culture – When you join CPF Board, you become part of a mission-oriented organisation with a strong culture of teamwork, collaboration, and innovation. As an employer, we value our people as our greatest asset, and foster a culture of respect, diversity, and inclusivity, where everyone's voice is heard, and contributions are recognised and celebrated.

Come and be a part of #TeamCPF today, to make a difference in the lives of others and in the future of Singapore.

[EYH(1]Remove?

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Responsibilities:

• Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities
• Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed
• Interface with Suppliers/CM (Contract Manufacturer), Engineering / Manufacturing / Quality Assurance / Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures
• Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation
• Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring
• Monitor to ensure supplier’s preventive and corrective actions are implemented and effective
• Participate with NPI team in selection of new suppliers

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Bachelor’s Degree in Engineering, Life Sciences, or related field with 1-3 years of relevant experience
• Experience in driving suppliers to improve quality performance
• Experience in conducting supplier audits
• Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.
• Experience in medical device / pharmaceutical / IVD is preferred
• Developing basic knowledge of quality tools
• Beginner to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.
• Experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc are preferred
• Experience with statistical analysis packages, eg, JMP, Minitab are preferred
• Detailed oriented, well organized and able to work independently and in teams.
• Good communication and collaboration skills
• Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Job Description:

• Attends customer’s complaints, enquires on quality related matters
• Investigate and analysis of customer complaints and follow-up with the relevant departments to ensure that they are addressed and closed in a timely manner
• Co-ordinate customer’s requests for products in mass production
• Attend quality reviews and presentations as and when required to by the customers
• Monitor and manager product quality performance and submit review report to Management periodically
• Study and improve production quality yield for each status of sample

Job Requirements:

• Candidate must possess at least Bachelor’s Degree in Engineering or equivalent
• Minimum 2 years of relevant working experience in similar role
• Self-motivated, innovative, dynamic and team player
• Excellent written and verbal communication skills
• Able to meet deadlines and willing to perform overtime
• Candidate with no working experience is also welcome to apply

Interested applicants, please send in your resume stating your date of availability, current and expected salary.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Data Quality Engineer/Analyst

Internal Code: A24122

This is a healthcare application:

• Mobile application (iOS and Android)
• Dashboard (React)

What will you do?

Support the development and business teams in unit testing and archiving data, engineered features, and algorithmic inputs/outputs throughout the data pipeline and to support analytics.

Proven experience as a data engineer/ data analyst in mobile app development projects and administrative dashboards.

1. Create unit tests throughout the data and algorithms domain:

• Work with engineering and business teams to implement wide-coverage unit tests of data and engineered features at different stages throughout the data collection and processing pipeline
• Create unit tests of inputs to and outputs from the algorithms that drive the clinical service
• The unit tests include validation of the inputs and outputs of black-box machine learning algorithms
• Establish a regular process to execute the tests and document their outcomes as a part of our product development and release lifecycle

2. Implement and refine mechanisms to continuously archive the state of algorithmic inputs and outputs:

• Implement a process of taking snapshots of data/features input into algorithms necessary to recreate their outputs/predictions at any point in the past during the service
• Communicate requirements to the software development team

3. Assist in the successful delivery of regular service analytics and reports:

• Support the business and analytics teams in their daily and weekly delivery of reports on data completion, user engagement, and algorithm actions by addressing any data quality and validation requirements.

What are we looking for?

• Bachelor's Degree in computer science, engineering, business analytics, technology, or a related field.
• Minimum of 2 years of experience in data engineering, data analytics, or data product management roles within the tech industry. Experience in healthcare is a plus.
• Ability to implement tests in Python.
• Experience in machine learning algorithms
• Good understanding of the validation requirements of an algorithmic product. Knowledge of healthcare regulation and auditing requirements is a plus.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice () to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

This position is a member of the Quality Systems team which supports the implementation and maintenance of various Quality Systems and to guarantee the quality oversight for validation related activities which includes Data Integrity at site.

Responsibilities

• Support the site projects on Qualification/ Validation

· Assessment and Approval of Documents

• Responsible to review and approve the Quality Control related (Analytical Instrument Qualification, Analytical and Microbiology Method Validation, Critical Reagent Qualification) protocols, reports, procedures and other related documents to ensure compliance to internal procedures and regulatory requirements.

• Evaluate and approve discrepancy related to qualification/validation protocols in order to guarantee documentation of the incidents and identification of corrective actions.

• Support collaboration and participations in projects as Quality Representative for Quality Systems and Validation.

• Support in multisite initiatives to ensure harmonization of Quality Systems and qualification/validation related activities between the plants.

• Any other duties as assigned by Manager/ Supervisor.

Requirements

• Degree in pharmaceutical sciences, life sciences, biology, biotechnology chemistry, chemical engineering, engineering or a related discipline.

• Certification and trainings such as Certified Quality Engineer or specific Validation topics will be advantages.

• Min experience of 2-3 years in the pharmaceutical or biotechnology in quality assurance, manufacturing operations or validation

Interested candidates please send in your resume to:

[email protected]

EA Personnel: Valerie Yong Kian Fung

CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

RESPONSIBILITY

Assist Product Owner and Business Analyst to craft out user story acceptance criteria.
Analyze and decompose complicated software systems, and design a holistic test strategy.
Conduct research on emerging technologies and develop test automation frameworks.
Develop test suites of test scenarios and test cases.
Take a risk-based approach for test automation.
Perform time-boxed exploratory testing.
Maintain a regression test suite in the QA nightly build.
Actively refine smoke test suite in the Development CI environment.
Lead system integration testing with other system owners.
Manage user acceptance testing.
Manage the defect life cycle, test artifacts, and repository.
Drive continuous improvement in agile testing practices and tools.
Take on a secondary role as an Application Performance Engineer or Application Security Engineer.
EXPERIENCE AND SKILLS NEEDED

Minimum of 3 years of experience in exploratory testing and regression test automation.
Strong analytical skills.
Meticulous attention to detail.
Good interpersonal skills, such as tactfulness.
Good presentation and listening skills.
Experience in an agile development environment will be an added advantage.
Experience with Robot Framework, SikuliX, Selenium, Playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC, and Sprinter) or EggPlant will be an added advantage.
Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage.
Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

Job Scope:

• Responsible for full spectrum of the Company’s quality standard
• Issue, maintain and file all QA reports (e.g. 8D report)
• Ensure maintenance of proper records pertaining to quality related issues
• Send QA reports to vendors
• Ensure timely closure and response of all QA issues
• Ensure effective corrective action taken for all NCR/CAR issued
• Follow up with vendors on their corrective action for rejected parts
• On-site audit at vendor’s location whenever required
• Conduct FA inspections
• Issue, maintain and file FA reports
• Maintain and upkeep Quality Management System and Quality System Procedure in accordance to ISO9001

Trait, Skills and Qualifications:

• Diploma / Degree in Electronics Engineering
• Possess knowledge of ISO9001
• Knowledge on ERP system would be an added advantage
• Resourceful and able to work independently
• Good at problem solving, negotiating and communicating
• · Team player

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

The Client is a global aerospace company.

Responsibilities:

• Ensure product and process quality by maintaining the quality management system and complying with relevant regulations and customer requirements.
• Update and improve quality procedures and control instructions.
• Address non-conformance issues with customers, vendors, and suppliers, conduct root cause analysis, and implement corrective actions to minimize quality-related costs.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001 / AS9100 / NADCAP).
• Perform audits of vendors and on-site as needed.
• Adhere to customer and regulatory standards.
• Work to reduce monthly costs associated with poor quality and scrap.

Requirements:

• Degree in Mechanical or Aeronautical Engineering or a related field.
• At least 2 years of experience with ISO9001 / AS9100 Quality Management System and NADCAP.
• Proficiency in problem-solving tools such as fishbone diagrams, FMEA, and the 5-whys methodology.
• Ability to read and interpret technical drawings.
• Strong analytical and communication skills.
• Ability to multitask and attention to detail.
• Familiarity with NADCAP processes like heat treatment, non-conventional machining, shot peening, and chemical processing is a plus.

· Responsible for developing, implementing, and maintaining Quality Plan for FA and production parts.

· Responsible for maintaining company measuring instruments.

· Interpret and analyse customer specifications with great details

· Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

· Facilitate meetings for production and quality personnels

· Support in internal and external audits.

· Maintaining Company’s Quality Management System (QMS)

· Any other duties as assigned by Supervisor.

Job Requirements:

· Technical certificates in any Engineering field

· Effective communication skills, both written and verbal, to liaise with customers and suppliers

· Ability to work with production and office staffs

· Ability to write root cause analysis

· Flexibility and adaptability to take on new challenges and responsibilities.

· Ability to read and interpret mechanical drawings

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.