Job Description & Requirements

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

UCT is looking for a talented Quality Inspector to join us in Singapore! The Quality Inspector is responsible for making sure that products meet standards of quality and safety. Responsible for performing inspections, checks and tests for quality control for the manufacture of products. Of Record (POR) documentation

Essential Duties and Responsibilities:

• Performs mechanical inspection to ensure all quality aspects of the job are met exactly.
• Raw materials, components, fabricated/manufactured parts & assemblies
• First Piece/First Article, Receiving/incoming inspection, in-process, final inspection
• Measures Complex components, assemblies and enclosures.
• Generates detail inspection and nonconformance reports as necessary.
• Inspection includes but is not limited to:
• Checks documents for accuracy and compliance to requirements
• Read and interpret information from engineering drawings, travelers, specifications and other documents to generate a complete and precise inspection report/record.
• Audits Quality Control process / programs to ensure compliance to standards
• Inspection(s) could be internal or external (i.e. source inspections)
• Interfaces and provides support to other departments, suppliers and customers on quality related issues as necessary
• Requires ability to maintain a clean and safe work environment
• Attain positive results and communication through team effort
• Strong organizational, problem solving and analytical skills, strong attention to detail.
• Develop inspection techniques and train Level 1 inspectors
• Performs other duties as assigned.
  

Knowledge, Skills and Abilities:

• Strong written and verbal communication skills
• Intermediate working knowledge of MS Office applications and database software
• Must be computer literate!
  
• Intermediate math abilities
• Must be able to read and apply production instructions, drawings, BOM schematics, and specifications at a proficient level.
• Intermediate level of GD&T (Geometric Dimensioning and Tolerance), must be able to independently and adequately interpret and apply GD&T to every job in a daily basis
• Must be able to operate manual CMM’s independently and edit CMM programs to make necessary changes to run accurate programs successfully.
• Able to read and interpret specifications, standards and engineering drawings/Blue Prints.
• Intermediate level for mechanical measurement techniques and workmanship standards related to machining and basic knowledge of secondary processes such as: paint, power coat, plating, etc.
• Must be able to read and interpret with weld symbols, call-outs, wiring and/or crimping requirements.
• Must be able to calculate flat patterns and inspect precision sheet metal
• Familiarity with Agile, SAP ERP will be advantages
• Must be able to use must hand held tools (micrometers, calipers, Others)

Educational/Certification Requirement:

• High School Diploma
• Technical Certification on similar discipline (Mechanical Quality, Engineering Services, Others)

Work Experience :

• Minimum 5 years working in production environment in electromechanical sub-assemblies or large integrated tools
• Experience working in a clean room environment preferred

• Prepare and analyze cost comparison for Building and Construction Signages
• Obtaining quotations, liaising and negotiate with main and sub-contractors
• Responsible for measuring quantities
• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments
• All other QS related job scope

Job Requirements:

• Degree / Diploma in Building or its equivalent
• At least 2 years experience as QS in construction industry specialise in Building and Construction Signages
• Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines
• Working location at East Area

Quality Engineer

Roles & Responsibilities

This position is responsible for the timely, accurate, efficient preparation and management of Quality System, Quality tracking, Quality assurance & Quality control.

1. Full responsibility of Quality Assurance and Quality Control function to ensure Products quality are meeting customer’s expectation and accordance with regulatory requirements. (Throughout Product Life Cycle)

2. Update and maintain company Quality Management System and Documentation

3. Conduct internal audit and continuous improvement on departmental process

4. Responsible for Customer audit and ISO9001 certification.

5. Prepare for AS9100 certification and implementation.

6. Drive continuous improvement projects that lead to Product Quality and Operational Excellence.

Qualifications & Requirements

1. Bachelor’s degree with at least 3 years relevant working experience.

2. Diploma with at least 5 years relevant working experience may apply.

3. Strong knowledge of Quality system, such as ISO9001/AS9100 and other regulatory compliances.

4. Experienced on Supplier Quality management, In-coming, In-process, Outgoing inspection.

5. Preferably Electronics/Communication industry.

6. Familiar with internal & external audits.

7. Strong communication skill.

8. Possess ERP experience will be added advantage.

9. Fluent in English and Mandarin.

Quality Executive

1 year contract, potential to renew

Come and join us!

Do you wish to work in a world-class organization trying your hands at something you have dreamt of doing?

“FIND YOUR PLACE” by joining a world-class MNC Healthcare company

Get an opportunity to explore new technology, learn new skills, enjoy the diverse and open culture, engagement and care, flexible working model, career opportunities, competitive salary and bonus, and endless amenities and benefits.

Company Description:

Our client is an MNC Healthcare company. As a focused healthcare company, with expertise in Innovative Medicine and MedTech, they are empowered to tackle the world’s toughest health challenges, innovate through science and technology, and transform patient care.

Overall Purpose of the Job

• The Quality Executive will assist in the management of the day-to-day aspects relating to Quality Management Systems and Compliance
• The Quality Executive owns and implements quality assurance programs designed to ensure effective and consistent processes with established standards.
• The Quality Executive works closely with SLH Operations and 3PL to drive timely resolution on Quality related issues.

Job Description

• Manage quality in product receiving process (including receiving inspection) with 3PL
• Support the inventory management in quarantine cage with 3PL
• Quality oversight on 3PL product destruction process.
• Lead resolution in non-conformances and discrepancies in a timely manner.
• Coordinate between 3PL, Source co. or Franchise on the monitoring of ambient environment (temperature and humidity as required) and handling of issues according to predefined agreements.
• Supports repack, relabeling, over labeling, kitting and reworking operations conducted
• Back-up Coordinator for stop shipment/ recall processes within the DC.
• Support quality management of repacking, relabeling, over labeling, kitted, and reworked
• Support the QA release of product repackaged, relabeled, over labeled, kitted, and reworked
• Supports product complaints, service complaints process and systems.
• Acts as an administrator for automated IT platforms and audits and change control.
• Manages / supports records and document management.
• Supports training management.
• Supports Quality audits and related action planning/implementation.
• Support Escalation of quality issues to the management.
• Responsible for the capture and processing of complaints reported to DC (Products and Distribution related complaints)
• Support the Quality audits (Internal, External and Supplier) of DCs
• Support the GxP (GMP, GDP) compliance of the DC.
• Responsible for day-to-day activities of base business.

Authorities

• Preparation / Review and Approval of validation documents
• Review and approval of repack relabel batch release.
• Product hold and release disposition in SAP for non-conforming material
• Product defect review and approval
• Initiation and review of procedures
• Review and approval of material destructions.
• Approval of Material movement in Quality Hold
• Approver for material destruction declaration form, QA Rejection letter

Qualification:

• Degree in Science (Life Sciences, Microbiology, etc) / Engineering required with minimum 2 years’ experience in QC or QA Function
• Preferably with working experience in Medical Device / Pharmaceutical Industry.

Technical Skills:

• Demonstrated knowledge and experience in quality or operations function.
• Task oriented with proven experience in the delivery high quality work.
• Proficiency in Microsoft Office (PowerPoint) other tools required to develop training materials
• Good analyzing / decision making ability.
• Customer (internal and external) driven approach.
• Knowledge of Good Distribution Practices (GDP), GxP and validation
• Demonstrated knowledge and application of ISO9001, ISO13485 and other international standards preferable.
• Knowledge of manufacturing environment is a plus.

Interested parties, please apply through this link https://jnj-apac.talent-pool.com/projects OR click on APPLY button.

Alternatively, you can share your CV at [email protected]

EA License: 94C3609

Reg No: R1440247

Responsibilities :

● Create and maintain automated test cases, test plans and test framework ensuring that they are up to date with requirements and policy changes

● Create, maintain and improve the automated test framework and test environments

● Conduct testing on new features and file defects

● Perform various tests such as manual/functional/performance/exploratory tests and support UATs

● Assist in resolving production cases

Requirements :

• Bachelor’s degree in Computer Science, IT or related fields
• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Proficiency in programming languages such as Java or Kotlin. Knowledge of Spring Boot will be an advantage
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx
• Experience working in SCRUM teams
• Excellent communication and collaboration abilities
• Proactive, self-driven and motivated

Job Scope:

• Responsible for full spectrum of the Company’s quality standard
• Issue, maintain and file all QA reports (e.g. 8D report)
• Ensure maintenance of proper records pertaining to quality related issues
• Send QA reports to vendors
• Ensure timely closure and response of all QA issues
• Ensure effective corrective action taken for all NCR/CAR issued
• Follow up with vendors on their corrective action for rejected parts
• On-site audit at vendor’s location whenever required
• Conduct FA inspections
• Issue, maintain and file FA reports
• Maintain and upkeep Quality Management System and Quality System Procedure in accordance to ISO9001

Trait, Skills and Qualifications:

• Diploma / Degree in Electronics Engineering
• Possess knowledge of ISO9001
• Knowledge on ERP system would be an added advantage
• Resourceful and able to work independently
• Good at problem solving, negotiating and communicating
• · Team player

Working Hours: Mon - Fri, 8.30am - 6pm

Location: Tuas

Responsibilities:

• Direct and Supervise WIP and Final Inspections
• Handle and Approve First Article Submissions
• Understand & Ensure Compliance with customer’s requirements
• Monitor, maintain and continually improve quality standards.
• Resolve Quality issues with internal and external parties.
• Supervise and maintain calibration of measuring equipment
• Review on non-conformances & approve disposition actions.
• Create 8D reports.
• Provide periodical quality review and trainings.
• Involve in First Article Product and process development.
• Assist in maintaining ISO System, reports, follow-up and closure.

Requirements:

• Min. Diploma in Mechanical/ Manufacturing or related Engineering field.
• Min. 5 years in related field.
• Knowledge on measuring and statistical techniques
• Knowledge on CMM Machine.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Hui Yew Cheong

Registration Number: R24124511

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for aws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar eld. Relevant NDT certication. 10+ years' experience as an NDT technician. Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

• Supervise & Lead QA/QC day to day activities including installation and coordination with consultants, main contractors and subcontractors.
• Prepare the ITP by studying project plans and specifications; calculating time requirements; sequencing project elements.
• Controls and implement Quality plan by reviewing material and test specifications, and plan and schedule changes; recommending actions.
• Check, confirm all Quality documents and specifications are complied with company standards.
• Attend the weekly and monthly project meetings to update the status and activity of the project.
• Prepares weekly or monthly project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Manage quality control of all construction and testing of the install facilities, equipment and systems.
• Maintains site Quality Standards by enforcing internal procedures, rules, and regulations.
• Maintains product and company reputation by complying with state and company policy and regulations.
• Contributes to project team effort by accomplishing related results as needed.
• Assist Project Manager in the preparation of project Capex, budget estimation and cost allocation.
• Able to work independently and less supervision required.
• Willing to work late or during weekends when required.
• Attend Toolbox meetings with project team onsite.
• With sound knowledge of process piping installation and equipment installation.
• Able to work with the project team in Piping layouts and design specifications.

Requirements

• Graduate of Bachelor's degree in Mechanical or equivalent engineering education.
• Physically fit to work at a construction site as QA/QC engineer.
• More than 3 yrs experience working on site installation and Greenfield project environment.
• Experience working at process/equipment construction site, plant installation, EPC, or equivalent.
• With experience in generating ITP and specification document
• Ability to read, understand & demonstrate the P&ID and PFD drawings to site work.
• Proficient to read and understand engineering plan drawings like piping and pipe support plan, equipment layout mechanical installation plan.
• Proficient with Microsoft office application and Microsoft project or equivalent and familiar with Google doc
• Familiar with Singapore and international codes /Regulations related piping, construction.

Position Overview:

As the Quality Manager, you will be responsible for ensuring the highest quality standards in the development and production of biomedical products. You will lead and manage quality assurance activities across the production process, ensuring compliance with regulatory requirements, industry standards, and company policies. You will play a pivotal role in driving continuous improvement initiatives and fostering a culture of quality within the organization.

Key Responsibilities:

• Oversee and manage the company's Quality Management System (QMS), ensuring compliance with ISO 13485, FDA regulations, and other applicable standards.
• Develop, implement, and maintain quality assurance policies and procedures.
• Lead quality audits, internal and external inspections, and regulatory compliance assessments.
• Monitor and report on quality performance metrics, identifying trends and areas for improvement.
• Manage the resolution of non-conformances, corrective actions, and root cause analysis.
• Collaborate with cross-functional teams (e.g., R&D, Manufacturing, Regulatory Affairs) to ensure product quality throughout the product lifecycle.
• Ensure proper documentation and traceability for all quality-related activities.
• Train and mentor staff on quality processes and regulatory requirements.
• Maintain relationships with regulatory bodies, customers, and suppliers to ensure ongoing compliance and quality standards.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Descriptions:

• Management of CAPA from tracking, including follow-ups and closure.
• Management of Change Control, Deviations, from tracking, follow-ups and closure.
• Review quality process control plan, drive quality issues to root cause, corrective actions and improvements.
• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Coordinate and assists during customer visits and audits.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Review the implementation and efficiency of quality and inspection systems.
• Collect, compile statistical quality data, and analyze data to identify areas for improvement in the quality system.
• Review of analytical reports, and batch records (manufacturing and packaging).
• Perform SAP QM setting, review test results, block / unblock of finished products.
• Manage customer queries, customer satisfaction surveys, and questionnaires and other quality / regulatory purpose documentation requests.
• Investigate customer complaints and non-conformance issues.
• Consolidate data to create the annual product quality review report.
• Track quality performance and initiate quality improvement plans.
• Perform risk assessments and monitor risk management activities at quality level.
• Conduct /perform training to employees to improve GMP / international standards certification awareness and compliance.
• Perform any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Minimum 3 years related work experience
• Possess experience in internal audit, validation activities, training management and batch release for API with good background on cGMP

Job Description

As a Software QA, you will be responsible for ensuring the quality, reliability, and performance of Project WATT's software systems. This role involves planning, executing, and delivering comprehensive testing strategies while collaborating closely with development and operational teams. You will utilize industry-standard testing tools and platforms to create efficient workflows, simulate real-world scenarios, and deliver actionable insights that enhance product stability and user satisfaction.

Responsibilities

• Develop and execute test plans, schedules, and strategies that align with project timelines, milestones, and objectives.
• Define clear testing objectives, deliverables and success criteria for each phase, ensuring alignment with product requirements.
• Utilize standardized testing platforms (e.g., BrowserStack, Sauce Labs) and tools (e.g., Docker Compose) to configure and manage test environments, replicating real-world scenarios.
• Conduct manual and automated testing across the software stack, including front-end, back-end, and APIs.
• Perform regression, performance, and stress testing to validate system stability under high-traffic and operational conditions.
• Identify, document, and prioritize software defects, ensuring timely resolution in collaboration with the development team.
• Monitor and analyze testing progress, proactively identifying risks and implementing corrective actions to meet deadlines.
• Deliver detailed test results, defect reports, and insights to stakeholders, supporting data-driven decisions.
• Continuously maintain and improve automated testing frameworks and workflows to enhance testing efficiency.
• Document testing processes, tools, and best practices to ensure team alignment and knowledge sharing.

Requirements

• A Bachelor's or Master's Degree in Computer Science, Software Engineering. At least 3 years of professional experience in software quality assurance may be prioritized.
• Proven ability to plan, execute, and deliver comprehensive testing strategies, meeting project goals and timelines.
• Familiarity with industry-standard testing platforms, containerization tools, and cloud-based testing services.
• Ability to independently set up and maintain testing environments is strongly preferred.
• Strong problem-solving skills with the ability to proactively address technical challenges and risks.
• Experience conducting manual and automated testing, including functional, regression, and performance testing.
• Excellent organizational and communication skills, with the ability to manage multiple testing activities and collaborate with cross-functional teams.
• Familiarity with project management tools for tracking testing progress and reporting deliverables.
• A proactive approach to maintaining system stability and reliability, with a strong commitment to delivering high-quality software solutions.

Reporting to:

Technical Lead

The scope of Services for the One (1) Onshore Quality Assurance/ Tester shall

be as follows:

a) Understand and document business processes, workflow and user story;

b) Perform checks under both functional and non-functional scopes of testing;

c) Review, develop and align test plan, test cases, scenarios and strategies,

ensure adherence to quality standards;

d) Perform manual and automated testing using Tricentis TOSCA, including

preparing test data when necessary;

e) Develop and maintain automated test scripts;

f) Review, support and participate in functionality and technical testing such as

performance testing, security, interface integration and usability testing;

g) Review test reports and results of the Authority’s appointed contractors for

the Authority’s systems;

h) Collaborate and coordinate with system stakeholders and Authority’s

appointed contractors for testing;

i) Review test process and recommend improvement, which includes analysing

test processes and methodologies, identify area for improvement and

recommend process optimisations and best practices; and

RFQ SPECIFICATIONS

j) Manage test activities and ensure the planned test activities are completed as

scheduled.

19. The One (1) Onshore Quality Assurance/ Tester proposed by the Contractor shall

have at least 3 years of experience as a Quality Assurance/ Tester or equivalent

position and the following skill sets:

a) Bachelor’s degree in computer science, Computer or Electronics

Engineering, Information Technology or related disciplines would be

preferred;

b) Certified Software Testing Professional and/or Certified Software Quality

Analyst will be an added advantage;

c) Strong analytical skills, meticulous attention to details, good interpersonal

skills such as tactfulness, good presentation and listening skills;

d) Experience in the following would be advantageous:

i. Automated testing tools such as Tricentis TOSCA; and

ii. Testing for government public services.

e) Good written and verbal communication and presentation skills, able to

interact professionally with all levels of the organisation.

Job Responsibilities

• To improve, implement and maintain factory-wide QA/QC documentation and programmes in compliance with the company’s GMP SOP to ensure materials, components, finished products and reporting are conform to customers’ requirements and industry standards

• To assist HOD in coordinating and implementing QA/QC daily activities, and ensure that the quality of products conformed to product specifications and customers’ requirements.

• Implement Strict QC SOPs, ensure all packer at production floor are adequately trained and competent to execute their responsibilities effectively in their respective work areas

• To perform bulk inspection on incoming products and review on the product certificate of analysis based on the registered specification.

• To plan production schedule, procedures, work instruction for overall quality control and coordinate on effective implementation for such plans, procedures or instructions.

• To conduct QC of product quality parameters daily with scheduled and random spot-checks, approve product release, sampling instructions, specification, test methods, and other quality control procedures

• To identify, propose and source consumables, equipment and machines related to Packing Plant and Quality Assurance.

• Maintain accurate records, organize and maintain the filing system for all company documents, ensuring easy retrieval when needed, ensure that all documents are current, properly formatted, and accessible to relevant personnel

• Develop systems and processes that track and optimize productivity and standards, metrics and performance targets to ensure effective return on assets

• To liaise with third parties on matters related to the company’s GMP production facilities, machineries maintenance, certifications renewal, audits, customer feedback and product complaints. The third parties shall include certification body, customers, suppliers, sub-contractors and authorities.

• Assist in various production support functions as required by management from time to time.

Job Requirement

• Candidate must possess at least a Bachelor’s Degree in Quality Assurance, Biotechnology, Food Technology, Science, Business or related discipline

• At least 2 years of working experience with knowledge in QA/QC, familiar with standards and practices such as Good Manufacturing Practices (GMP) and any other Quality Management certifications

• Strong organizational and planning skills, independent and collaborate effectively with cross-functional teams in meeting deadlines

• Good communication and interpersonal skills, dynamic team player and

• Proactive and reliable in identifying issues in documentation processes, production processes and propose effective corrective action and solutions

• Computer literate & proficient in Microsoft Office software

Summary

The Senior Control Room Supervisor / Control Room Supervisor is responsible for leading a team to run operations smoothly (managing manpower and resources) to minimize complains and ensure on time delivery to our customers.

Duties and Responsibilities

• Prepare and check attendance of subordinates
• Prepare monthly Catering flight schedule for distribution to user departments
• Oversee on-going operations in Catering Control and to ensure:

▫ Catering orders received from the Airlines are acknowledged, processed, and updated

▫ Messages received from the Airlines are acknowledged and conveyed to the relevant departments, section

heads, individuals, OE DPT and MCO for action

▫ Ensure the Control staff duly carries out printing sequence for the Daily Aircraft Food Supply Sheet

▫ Ensure Catering charges for the handling of Ad hoc flights are costed by Food & Beverage (F&B)

Department and the charges are made known to Ground Services Division, Apron Department

▫ Ensure cash collected for the handling of Ad hoc flights are handed over to F&B department on the

following working day

• Attend to handling of Ad hoc Flights Catering and ensure coordination in the activities required for processing of the Flight’s Catering Uplift
• Liaise with Catering Purchasing Section on the requisition of non-stock items required by the Airlines (scheduled or ad hoc)
• Ensure security and proper use of the Section's petty cash funds
• Liaise, communicate and co-ordinate with Operations Sections on changes in Catering Menus of delayed flight, when these are known
• Ensure compliance with all workplace safety, security, and health policies and procedure
• Perform any ad-hoc duties as assigned by the reporting manager or department head

Requirements

• GCE 5 “N” levels or 2 “O” levels
• Minimum 2 years’ experience
• Minimum 1 year in a supervisory or leadership role
• Must possess minimum LTA Class 3 License

Quality Controller/GAP Coordinator

Job Description

The Quality Control/GAP Coordinator is responsible for ensuring all products received perishable and nonperishable are of standard as per the company’s specifications. This role must also ensure supply security and FIFO practices.

Scope: Singapore (Choa Chu Kang farm)

Working Days: 5.5

Reporting into: Head of Farm Operations

In This Role You Will (Responsibility):

· Ensure incoming and outgoing goods (perishable and non-perishable) meet company and GAP standards.

· Daily inspection of production areas to ensure compliance with company and GAP standards.

· Analyse quality data and summarise findings.

· Generate inspection reports.

· Conduct quality assurance reports.

· Conduct internal self-audits of processes and procedures.

· Prepare quality assurance documents in compliance with local regulations and GAP standards.

· Ensure quality testing (shelf-life samples) and laboratory microbial testing is done in accordance with GAP standards.

· Ensure staff training is done to comply with GAP and Food Safety requirements.

Traits

• Continuously learning and challenge the status quo.
• Willingness to join and grow with a dynamic company.
• Strong bias for action.

· Must be energetic and hands-on to take on new and challenging tasks and to work well with limited resources and a strong sense of accountability.

Assist operation in problem solving and execute improvement initiatives

The incumbent will report to the Head of Central Compliance and Assurance in implementing continuous monitoring activities for compliance related areas. Working closely with the Chief Compliance Officer, Regional Compliance team and various business stakeholders within the organisation, this individual will develop and implement monitoring and testing processes to ensure that all business activities are conducted in accordance with applicable laws, regulations and corporate policies.

Responsibilities:

• Identify and assess regulatory risks and develop testing strategies to address identified risks.
• Execute and maintain an effective compliance testing program that ensures adherence to relevant laws, regulations and corporate policies.
• Ensure that test plans are designed to cover all relevant areas of risk and that testing procedures are documented and communicated to all relevant stakeholders.
• Provide guidance and recommendations to business units to improve compliance controls and processes.
• Report on testing results to senior management and other stakeholders, including recommendations for corrective actions where necessary.
• Monitor the remediation actions identified to ensure they are carried out in accordance with the agreed timeline and their effectiveness.
• Maintain a thorough understanding of laws, regulations, industry standards and corporate policies related to insurance and financial advisory industry.
• Collaborate with Regional Compliance testing team, internal and external auditors to ensure that all audit findings related to compliance testing are appropriately addressed.

What motivates you?

• You obsess about customers, listen, engage and act for their benefit.
• You think big, with curiosity to discover ways to use your agile approach and enable business outcomes.
• You thrive in teams and enjoy getting things done together.
• You take ownership and build solutions, focusing on what matters.
• You do what is right, work with integrity and speak up.
• You share your humanity, helping us build a diverse and inclusive work environment for everyone.

What we are looking for

• Diploma / Degree
• At least 2-3 years of working experience in audit/quality assurance function within the financial industry (preferably insurance).
• Professional certification such as M5, M8, M8A, M9, M9A and HI and ICA Diploma in Compliance would be advantageous.
• An AML qualification such as CAMS or CFCS, or a privacy qualification such as CIPP or CIPM, would be advantageous (though not required)

What can we offer you?

• A competitive salary and benefits packages.
• A growth trajectory that extends upward and outward, encouraging you to follow your passions and learn new skills.
• A focus on growing your career path with us.
• Flexible work policies and strong work-life balance.
• Professional development and leadership opportunities.

Our commitment to you

• Values-first culture
  We lead with our Values every day and bring them to life together.
• Boundless opportunity
  We create opportunities to learn and grow at every stage of your career.
• Continuous innovation
  We invite you to help redefine the future of financial services.
• Delivering the promise of Diversity, Equity and Inclusion
  We foster an inclusive workplace where everyone thrives.
• Championing Corporate Citizenship
  We build a business that benefits all stakeholders and has a positive social and environmental impact.

Responsibilities:

• Inspect factory equipment for cleanliness prior to production.
• Perform comprehensive checks on raw materials and finished products for quality, including microbial, sensory, and visual evaluations.
• Immediately report any quality concerns to supervisors for investigation and resolution.
• Coordinate with other departments to schedule material inspections and sampling.
• Verify certificates to ensure raw materials meet required standards before use.
• Provide training for new staff members.
• Assist with both internal and external audits.
• Maintain precise and accurate records.
• Calibrate equipment as necessary.
• Manage inventory and ensure lab cleanliness.
• Issue Certificates of Analysis for materials and finished products.
• To perform any additional tasks assigned by the company.

Requirements:

• Minimum 2 years of relevant working experience in related field.
• Proficient in Microsoft Word, Excel, and PowerPoint.
• Able to work independently, as well as a team player.
• Possess good communication skills – written and verbal

To facilitate in the job application, please include the following in the resume:-

• Last drawn, current and expected salary.
• Duties and responsibilities for each job.
• Resume in Microsoft Word format
• Reason for leaving for past and present employment.
• Availability.
• Residential area.

Thank you.

David Ong (R1110279)

Adept Manpower (EA License: 22C1006)

https://adeptmanpower.com/

Environmental Control Officer (ECO)

Monitor strict compliance of “Permit to Work” system at worksite & explain the importance to workers at the time of safety talk/tool box meeting Coordinate Environmental Control Committee Meeting and implement all environmental control programs
Maintain mandatory records and other documentation as required by the regulatory authorities
Ensure compliance of operations with NEA and EHS regulations
Prepare Site Environmental Control Report on a regular basis
Conduct environmental control audit and investigations
Able to maintain environmental requirements in line with OHSAS click apply
Ensure compliance with environmental regulations, develop environmental control plan, site clean-up plans & monitor their completion

Job Requirements
Candidate must possess at least Diploma/Degree in Civil Engineering or its equivalent
Candidate must be a NEA registered ECO
Minimum 3 Years’ Relevant Experience In Building Construction Industry With FSM certificate will be an advantage
Must have professional knowledge in law and regulations of Environment Acts.

On behalf of the hiring company, a market leader in their specialisation, we are looking for a suitable candidate to join them as Technical Officer (Control & Instrumentation).

Responsibilties

• Responsible for the proper supervision and execution of maintenance and overhaul of all control and instrumentation equipment
• Supervise contractors to ensure good quality and progress of maintenance works, full compliance with contract specifications, and report on the performance of contractors
• Assist the Engineer in the investigation of plant defects and outages
• Perform troubleshooting and rectification of fault and maintenance works,
• carry out inspections and monitor the condition of plants

Requirements

• Diploma in Engineering (Electrical/ Electronics/ Mechatronics/ Control) or equivalent
• Experience in Power, Utilities/Petrochemical, or Process Plants will be an advantage
• Company transport is provided at popular MRT stations in the west

Monthly allowance: $300

Work location: Jurong Island

12 months contract, renewable with consideration of work performance

Job Description

· Responsible to perform his/her work in accordance to the relevant HSSE regulations and other requirements

· Responsible to comply and adhere with CES_SDC's HSSE Management System requirements

· Responsible to adopt and use the relevant records in the HSSE Management System to conduct checks / inspections, carry out proper record keeping, and submit such records to the CES_SDC's HSSE personnel where required

· Responsible to adhere to the instructions from CES_SDC's HSSE personnel with regards to compliance of HSSE requirements

· Responsible to adhere to the CES_SDC's Policies, HSSE Rules & Regulations, HSSE Risk and Impact Assessment (HSSERIA), Safe Work Procedure (SWP), HSSE Instructions, security instructions, etc

· Responsible to read and understand the HSSERIA, SWP and any other required HSSE documentation for the work operation

· Responsible to discharge his duties in accordance to the Code of Practice for Environmental Control Officer

· Responsible to prepare and submit the Site Environmental Control Programme according to the format required by National Environmental Agency to the workplace's/ project's Manager in-charge for approval

· Responsible to prepare and submit the bi-weekly Site Environmental Control Report according to the format required by National Environmental Agency to the workplace’s/ project’s Manager in-charge for approval

· Responsibilities and duties of the ECO shall emphasize on the following main areas of concern:

1. Elimination of disease-bearing insects and rodents
2. Ensuring proper disposal of construction waste/ marine clay
3. Eliminating noise, air and water pollution
4. Eliminating earth littering
5. Preventing siltation of drains

· Provision of proper maintenance of septic tank(s)/ holding tank(s), chemical/ portable toilet(s) and other sanitary facilities

· Any other environmental health matters

· Responsible to inspect the workplace/ project to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard

· Responsible to attend to all feedback on such irregularities and inform the Manager in-charge of such irregularities accordingly

· Responsible to organise campaigns, training courses and other activities with regards to environmental to organise campaigns, training courses and other activities with regards to environmental control

· Other Ad-hoc duties as assigned.

Job Experience

· Registered ECO cum ECMO with minimum 5 years of working experience in a construction firm, preferably experience in LTA /PUB project/HDB/MPA requirement

· Possess Earth Control Measure Officer (ECMO) qualification

· Be dynamic, self-motivated, proactive, and results-oriented

· Excellent team spirit, strong technical competence and good interpersonal skills

· Minimum Diploma, Advanced/Higher/Graduate Diploma/Degree in Safety, Health and Environment

We are seeking experienced Pest Control Managers to join our team!

7 years of pest control experience a MUST!

Contact HR @ 91383851

Key responsibilities:

• Pest control kowledge/ experience a must
• Able to work independently
• Dedicated to finding solutions
• Self analysis is key
• Constant development
• Manage client expectations
• Manage team
• Sales and Business development

Pre-requisites:

• 7 years and more experience
• Employment Track record will be scrutanized
• Project track record
• Diploma in any faculties

Work Location: ESR Building, Chai chee / Island wide

Work days: 5.5 days

Work timing: 8 - 5pm

Contact HR @ 91383851

9am to 6pm (Mondays to Fridays)

Up to $3,500

Hybrid arrangement may be considered after 3 months

1 Year Contract Collections Officer - Commercial Debt Collections

Raffles place

Job Responsibilities

• Collect overdue commercial debt from corporate accounts within South East Asia Region ( e.g. Singapore, Malaysia etc )
• Negotiate the repayment arrangement with debtors
• Handle enquiry calls with customer on case progress
• Record collection activities into system
• Provide support to the team on collection and administrative issues

How to Apply: Send your resume to: