Roles and Responsibilities

• Design, maintain and administer the Company's quality training programs.
• Prepare curriculum, training material and recurrent training material to a defined standard.
• Teach formal classroom training courses such as but not limited to policy, procedures, maintenance paperwork, safety, Human Factors, airworthiness regulations, recurrent training and other subjects.
• Revise training curriculum and serve as subject matter expert.
• Design, maintain and administer GE Aviation – Singapore’s Quality System.
• Initiating, updating and maintaining QCWIs and other quality documents as and when required.
• Be in control of the Technical Library. Assure all data are up-to-date and that revisions are distributed to all Engineers affected.
• Facilitate all regulatory and customer audits, work with the appropriate functions in the formulation of corrective actions.
• Support the training and qualification of Certifying Staff.
• Be responsible for the archival of maintenance records. Supervise a team of Technicians in the scanning of maintenance records and ensuring the operability of the scanning equipment.

Required Qualifications

• Degree in Engineering
• 3 or more years of Experience with Quality Systems
• Certified Part 145 or equivilant
• Minimum 2 years of aerospace experience in repair/manufacturing or a quality assurance role.

Desired Characteristics

• Holds a recognized Lead Auditor or Internal Auditor certification.
• Knowledge of Quality Systems/ISO/Aerospace Standards.
• Possess CAAS Air Legislation paper.
• Knowledge of basic engineering and aircraft engine component repair.
• Good auditing experience.
• Good command of written and spoken English.
• Basic knowledge of PC software.
• Good initiative and analytical skills.
• Strong attention to detail and accuracy.
• Ability to communicate at all levels of the organization.
• Demonstrate oral and written communication skills.
• Strong interpersonal and leadership skills.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Oversee the development, implementation, and management of the qualification processes for the company's products across all global markets
• Ensures that all products meet the highest standards of quality and compliance with international regulations and customer expectations.
• Lead a team of qualification specialists and work closely with other departments, including project management, product design, regulatory and compliance, production, product management and external parties like suppliers and contract manufacturers to ensure seamless qualification processes.
• Develop and implement global qualification strategies aligned with the company’s business objectives.
• Oversee the development and execution of qualification plans for new products and updates to existing products
• Responsible for series process and product quality for all products manufactured by external contract manufacturers.
• Identify and mitigate risks associated with product qualification and compliance
• Engage with customers to understand their qualification needs and expectations.

Requirements:

• Degree/Masters in Engineering
• Experience in Electronics Industry
• Global Experience will be a plus
• At least 10 years of experience in Quality

Account Manager:
Kerwin Tan Kai Bin (R1331624)
[email protected]
EA16S8107

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

Carry out activities to addresss & resolve Non-Quality Events (NQEs)

Monitors & carry out activities to resolve NQEs at various product / production lines

• Monitors & records NQEs from the production line
• Reviews, analyses & validates NQE contents
• Executes immediate containment actions for NQE e.g., hold lot in Manufacturing Execution System (MES), etc.
• Prepares and consolidates quality issue review topics (to share on the progress of follow ups on NQEs / MRBs) prior to daily meeting with Yield Dept
• Prepares information package required for MRB (e.g. event chronology, preliminary investigation and analysis results, etc.); Facilitates MRB meetings
• Records, follow ups and reports Quality Engineering activities (e.g. NQE, MRB, etc.) on Quality Activities Tracker
• Issues & drives 8Ds for NQE issues

Monitor product thru Quality Gate

Applies Quality Gate (QG)

• Monitors & records QGs results from the production line
• Performs lab analysis (e.g., SEM / EDX) on QG failed parts
• Participates in task forces (defect analysis, risk assessments)

Following the detection of QG failed lots, proposes short-term actions to ensure integrity of the quality of products and / or processes (i.e., equipment shutdown, etc.)

Others

Data Analysis: Pulls, plots capability & trend and analyses data from JMP & Klarity

Reports: Updates & presents various Quality Engineering reports & KPIs

Others: Performs audits and other tasks as may be assigned

Requirements:

Educational Qualifications :

Diploma – Minimum 2 years of relevant experience in a manufacturing environment

Higher NITEC – Minimum 3 years relevant experience

NITEC – Minimum 6 years relevant experience

Technical / job knowledge :

• Knowledge in Quality tools and methods (SPC/MSA/FMEA, Problem-Solving & Audit skills) is an advantage
• Knowedge in statistical tools (e.g. JMP, Klarity, etc.) is an added advantage
• Knowledge and skills in lab (SEM/EDX, etc.) is an added advantage
• Knowledge of semiconductor products & manufacturing processes

Personal capabilities :

• Meticulous and with a sense of initiative, responsibility & urgency
• Team player with positive attitude and willingness to learn

Others :

• Able to work on normal swing shift (Sunday - Thurs), 8.30am to 6pm

Jobs Responsibilities

• Work closely with UAT Team Lead to ensure requirements and scope are clearly understood.
• Conduct UAT testing for business deliverables including new markets or products, application decommissions, operational improvements, and industry-driven regulatory changes.
• Assist Test Lead to track UAT issues, and publish daily EOD test status.
• Perform end to end testing with full understanding of the Business Requirements and Functional Specs.
• Communicate to UAT Team Lead on open issues and defects, run book execution progress, and risks.

Job Requirements

• Keen in UAT
• Able to commence work within short notice

Application Procedures

Interested candidates, please email your resume to:
Attention: Lynn Mak Ling Ling (CEI No. R1986990)
[email protected]
Recruit Express Pte Ltd (EA No. 99C4599)

We regret that only shortlisted candidates will be notified.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

• Clarke Quay
• 1 year renewable
• Monday - Friday, 8.30am - 6.00pm
• Quality team
• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Duties and Responsibilities of Document Control cum Admin Assistant

1) Assist Engineer in coordinating all document control activities.

2) Control of Design Project files and customer database.

3) Perform tracking, printing, archiving and distribution of documents.

4) Liaise with each department on the calibration of measuring tools.

5) Update and compilation of Engineering data.

6) Establish and maintain organized paper and electronic filing systems according to office procedures to ensure the expeditious retrieval of information

GENERAL ADMIN

1) Scan office materials, locate and compile information and format reports, graphs, tables, records, and other sources of information

2) Operate and coordinate servicing of office equipment such as copier, fax machine, scanners, etc

3) Coordinate and assist with planning of office activities, teleconferences, meetings and to coordinate events, receptions, workshops, conferences and high-level committee/board meetings as requested

4) Purchase and manage office stationery and pantry inventory

5) Prepare travel expense reimbursements, invoices and journal entries

6) Coordinate travel arrangements and itineraries

7) Provide general administrative support including but not limited to: phones, distributing mail, and preparing expense reports.

8) Maintain the security of confidential information

Education Qualification:

Minimum Diploma

Experience / Skill Required

- 1-3 years experience in Document Control in LTA projects / Civil Engineering / Construction Company

- Good interpersonal and communication skills and able to interact with people of all levels

- Must be able to work on alternate half day Saturdays

- Able to start work within 2 weeks after job offer will have an added advantage

Other Requirements:

1) Must be willing to learn

2) Good team player

Full Time

Minimum Qualification Level

GCE 'N' Level

Monthly Salary Range (SGD)

$2,500 - $3000

About the Role

We are seeking dedicated Pest Control Technicians/Supervisors to join our team. In this role, you will safeguard homes and businesses from pest infestations, ensuring public health and safety. Success in this position requires strong technical skills, excellent customer service, and the ability to use your ‘detective’ skills to identify and solve pest problems effectively.

Key Responsibilities

Customer Engagement:

- Speak with customers and genuinely listen to their concerns.
- Educate clients on preventive measures and exclusion methods to minimize infestations.
- Ensure strong customer service with follow-ups as needed to guarantee satisfaction.

Inspection and Problem Solving:

- Conduct extensive inspections to identify pest issues and underlying causes.
- Use problem-solving skills to develop and implement effective exclusion methods.
- Provide tailored recommendations for long-term pest control solutions.

Pest Control Operations:

- Apply pesticides when and where necessary, following strict product label instructions and NEA regulations.
- Utilize baiting and monitoring systems to track and manage pest activity.
- Operate and maintain pest control equipment such as sprayers, foggers, and dusters.

Team Collaboration:

- Work effectively with office personnel and the sales team to meet customer needs.
- Maintain accurate service reports and documentation to support operational efficiency.

Safety and Compliance

- Adhere to all safety standards, including proper use of personal protective equipment (PPE).
- Comply with NEA guidelines for pesticide handling and storage.
- Stay updated on industry best practices and regulatory changes through regular training.

Requirements

Qualifications:

- Valid NEA Vector Control Technician (VCT) license.
- Valid Class 3 driving license.

Skills and Attributes:

- Excellent communication and interpersonal skills.
- Strong attention to detail with a proactive problem-solving mindset.
- Ability to work independently and manage time effectively.
- Physically fit, capable of lifting up to 20kg, and comfortable working in confined spaces.

Experience:

- Prior experience in pest control or related fields is a plus.
- Familiarity with Integrated Pest Management (IPM) principles is advantageous.

Why Join Us?

- Gain valuable training and certifications in pest control.
- Opportunities for career progression to supervisory or managerial roles.
- Be part of a supportive and professional team environment.

- Incentives will be given and earnings around $3,200 to $3,800 is possible

Job Responsibility

• Inspect and identify all possible forms of hazards in a work environment.
• Inspect work areas regularly to ensure compliance with workplace safety and health requirements.
• Check equipment to ensure it is in working condition and do not pose any environment health hazard to user or the workplace.
• Provide solutions to address any unsafe practices or act at workplace.
• Conduct risk assessments on work site.
• Prepare reports on workplace safety assessments.
• Take charge of all matters related to environmental health such as:

1. Disease-bearing insects and rodents

2. Proper disposal of construction waste

3. Noise, air and dust pollution

4. Earth littering

5. Siltation of drains

6. Food hygiene in workers canteens if any

7. Any other environmental health matters

• Report these conditions/ situations with recommendations on remedial measures to be taken to prevent recurrence.

Requirement

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 2 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/ Health/ Safety or equivalent.
• Candidate who possess high experience will be considered for senior role.

• Assessment and management of risks on the business and processes.
• Monitor compliance with group procedures, local policies, and relevant laws/regulation.
• Conduct internal control reviews for stores, back office, events and on ad-hoc topics.
• Conduct monthly reviews and analysis on sensitive and high-risk transactions.
• Follow up on audit/internal control recommendations to ensure resolution of relevant risks and findings.
• Conduct testing and complete internal control self-assessment checklists.
• Participates in stock takes and ensure controls on inventory management are well respected.
• Partner with relevant departments and stakeholders to implement, change, or improve processes.
• Conduct trainings/briefings and provide support to stores and office teams on controls and compliance matters.
• Works closely with regional team on internal control initiatives.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

i. Monitor/manage feedback from multiple feedback channels (e.g.calls to contact centre, emails to public facing inboxes, as well as other digital and traditional platforms);

ii. Monitor and manage Authority’s contact centre;

iii. Manage and enhance Authority’s Customer Management System (CMS) by working closely with system vendor on the deployment of system enhancements by stipulated timeline;

iv. For cases handled by SQO, ensure that final replies are issued to feedback providers within the service timelines (See ANNEX C);

v. Respond to requests from operation divisions for vetting of replies within one working day;

vi. Submit monthly data analytics report on NParks and AVS overall case management performance for current month by the end of the next month;

vii. Implement any other Service improvement initiatives when assigned

Monday to Friday - 8.30 AM to 6.00 PM

Working location : 1 Cluny Road , Singapore 259569

Job Requirement :

Degree in mass communications, marketing, or related discipline;

(b) At least 3 years’ relevant experience in customer service management, call centre management or quality service management;

• Well Established Medical Devices Manufacturing Company
• Basic $2200 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers
• Documentation and reporting skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Collaborate and communicate effectively with internal teams, including OPS packers, admin/logistics coordinators, and the QC team.
• Perform daily quality checks on inspection reports from Kizeo to ensure they meet documentation standards.
• Manage the distribution and revision of all company quality documentation, updating work instructions when necessary.
• Review and verify the accuracy of reports submitted by the QC team daily.
• Track and update the qualifications and training requirements for quality inspection personnel as directed by the executive and manager.
• Update the department's work instructions to reflect changes in job flow or customer requirements.
• Step in as a QC inspector to carry out routine inspections when needed.
• Perform Y7 tasks in SAP for NC crates.
• Handle any other ad-hoc tasks assigned by the executive or manager.

Requirements:

• Proficient in MS Office (Word, Excel, Outlook).
• At least 1 year of experience in a warehousing environment.
• Able to adapt to a fast-paced, detail-oriented role.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

(EAST REGION) - Paya Lebar MRT

- Stable & Well Known construction industry

- Basic + AWS + VB

Responsibilities:

- Managing company’s project performance, from delivering of operational KPI to liaising with internal Project Managers.

- Prepare quarterly reports for review and clearly present the results and status to various stakeholders on a regular basis.

- Key personnel in maintaining, analysing, and forecasting project cost to project team and management.

- Active involvement in budgeting and forecasting processes; administer and review all project forecasts and actual, explain and correct variances on a monthly basis.

- Liaise with external auditors to conduct statutory audit and interim audit.

- Provide insights into project WIP, collections, risks, opportunities and cashflow.

- Actively reviewing and recommending measures for continuous improvement in project management and reporting processes.

- Present updated financial data and actively attends project management meeting to review cost status.

- Review and provide accurate project payment respond and invoices for payment.

-Any ad-hoc duties as and when required.

Requirements:

- From Construction company & experience in handling cost control for project

- Diploma / degree

- Project cost control for Work in Progress (WIP)

- Liaise with PD & PM

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Job Description:

• Assist Resident Engineer in daily close supervision and coordination duties
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Participate in construction interface meeting for Instrumentation, Building Services (ELV) systems
• Checking BIM Model and interface with C&S team for the completeness of site clearance for Instrumentation construction activities
• Review of design deliverables for Instrumentation, Building Services (ELV) and release of IRF’s to contractor as per RE’s instructions
• Update of Daily Site Reports (DSR), maintain quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works
• Participate in FAT activities and punch list follow up
• Participate in SAT, Commissioning of Instrumentation, Building services (ELV) activities till the final handover of the project

Job Requirements:

• Diploma in Instrumentation Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project or waste/water management projects in Singapore, particularly Instrumentation, Control, Automation and Building Services (ELV) systems

Job Description

• Oversee ICA (Instrumentation, Control and Automation) related design for process plant (water/wastewater plant, incineration plant, etc.), from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimize the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Review project specifications, technical proposal/design documentations from the ICA subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings.
• Support ICA related procurement work, develop cost estimates for ICA products and ICA works, and prepare the schedule for ICA works.
• Oversee project coordination, ensuring project is on schedule and is running smoothly, including handling technical matters at site, managing ICA subcontractor/supplier and working on site with clients and other stakeholders.
• Supervise installation and testing and commissioning of ICA works.
• Perform other duties as assigned by the management.

Requirements

• Minimum 4 years of experience in process plant electrical EPC work with Degree in Electrical , Electronic or Instrumentation Engineering or related Engineering Discipline. For Diploma holder, minimum 6 years of experience is required. For senior position, candidate must have at least 8 years of experience.
• Familiar with relevant code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D/Bentley is preferred.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• In-depth knowledge of control system architectures, such as PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater or incineration related control system.
• Relevant experience in ICA design and site work for water, wastewater treatment and incineration works.
• Able to work in Tuas area.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)