Responsibilities:

Carry out activities to addresss & resolve Non-Quality Events (NQEs)

Monitors & carry out activities to resolve NQEs at various product / production lines

• Monitors & records NQEs from the production line
• Reviews, analyses & validates NQE contents
• Executes immediate containment actions for NQE e.g., hold lot in Manufacturing Execution System (MES), etc.
• Prepares and consolidates quality issue review topics (to share on the progress of follow ups on NQEs / MRBs) prior to daily meeting with Yield Dept
• Prepares information package required for MRB (e.g. event chronology, preliminary investigation and analysis results, etc.); Facilitates MRB meetings
• Records, follow ups and reports Quality Engineering activities (e.g. NQE, MRB, etc.) on Quality Activities Tracker

Issues & drives 8Ds for NQE issues

Monitor product thru Quality Gate

Applies Quality Gate (QG)

• Monitors & records QGs results from the production line
• Performs lab analysis (e.g., SEM / EDX) on QG failed parts
• Participates in task forces (defect analysis, risk assessments)

Following the detection of QG failed lots, proposes short-term actions to ensure integrity of the quality of products and / or processes (i.e., equipment shutdown, etc.)

Others

Data Analysis: Pulls, plots capability & trend and analyses data from JMP & Klarity

Reports: Updates & presents various Quality Engineering reports & KPIs

Others: Performs audits and other tasks as may be assigned

Requirements:

Educational Qualifications :

Diploma – Minimum 2 years of relevant experience in a manufacturing environment

Higher NITEC – Minimum 3 years relevant experience

NITEC – Minimum 6 years relevant experience

Technical / job knowledge :

• Knowledge in Quality tools and methods (SPC/MSA/FMEA, Problem-Solving & Audit skills) is an advantage
• Knowedge in statistical tools (e.g. JMP, Klarity, etc.) is an added advantage
• Knowledge and skills in lab (SEM/EDX, etc.) is an added advantage
• Knowledge of semiconductor products & manufacturing processes

Personal capabilities :

• Meticulous and with a sense of initiative, responsibility & urgency
• Team player with positive attitude and willingness to learn

Others :

• Able to work on normal swing shift (Sunday - Thurs), 8.30am to 6pm

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

1. Perform daily periodic checks of Central Kitchen to ensure compliance to in-house GMP/GHP standards, SOP, Product Specifications, etc.

2. Conduct random checks on incoming raw materials, and perform product cutting on raw materials to ensure goods received are within in-house specifications.

3. Ensure Process Verification and Validation exercise are completed (i.e. SOP/CCP verification, new product launch process observation, monthly facility checks, monthly traceability exercise, finished goods shelf-life verification, etc.)

4. Conduct investigations on product/process non-conformance (on-line and customer complaints) and follow-up on proposed corrective/preventive measures to ensure effectiveness.

5. Promptly follow-up with contractors (chemical/pest control) during routine servicing to ensure work orders are conducted as per contract.

6. Participate and engage in quality system implementation (audit activities by regulatory/certification bodies and customers).

7. Conduct data/trend analysis on non-conformity of raw material/finished goods, pest reporting statistics, monthly production and facility check statistics, etc. for process and quality improvement.

8. Ensure analysis of food products via microbiological and physical testing, calibration of lab equipment and measurement tools, internal sensory evaluation are conducted as per schedule.

9. Report all non-conformances, discrepancies and/or deviations, and follow-up on the investigation of the non-conformity results.

10. Other projects as assigned.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish! The AppleCare Technologies Quality Engineering has an immediate opening for an Application Quality Engineer to lead advanced testing strategies, introducing innovative QA practices for supply chain projects. Your role is critical in shaping the QA processes, enhancing product quality, and driving the adoption of best practices across the organization. Your technical acumen, leadership through influence, and commitment to quality excellence play a pivotal role in advancing the organization's quality assurance practices in the supply chain area and ensuring the delivery of exceptional products.

Description

You will be at the forefront of ensuring the highest quality standards in our procurement, production, and distribution processes. With a proven track record of extensive SAP experience, specifically in SAP MM, O9, and Scope applications, you will develop and implement comprehensive quality management systems. Your expertise will be instrumental in developing thorough and comprehensive test script coverage, monitoring compliance with quality standards, and collaborating closely with cross-functional teams. You will be instrumental in analyzing supply chain processes, identifying areas for improvement, and implementing corrective actions. Additionally, you will be responsible for building Test Automation, conducting risk assessments, managing quality risks, and driving business for sign-off. As a key player in our organization, you will provide training and support to business, mentor junior quality engineers, create and maintain documentation, and prepare reports on quality performance. Join us on this exciting journey to enhance our Supply Chain operations and deliver exceptional results.

Minimum Qualifications

• Proven experience in quality engineering, preferably within a supply chain environment
• Knowledge of quality management systems, tools, and methodologies
• Ability to work effectively in a cross-functional team environment

Preferred Qualifications

• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• SAP functional experience in MM, and experience migrating from SAP R/3 to SAP S/4 HANA is beneficial

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

A CNC Operator has many duties and responsibilities in any field of production. Some things expected of a CNC Operator daily include:

• Read and understand blueprint designs
• Set up machinery for production
• Rework metal to create the blueprint design
• Measure and verify all calculations prior to setting up the machinery
• Maintain a clean and organized working environment
• Complete routine maintenance of their machinery
• Enter all relevant codes to specify the feed, speed, and cut of any toolpath for a CNC

Responsibilities:

• Responsible in supplier quality management and quality interface with suppliers/internal departments
• Work closely with Material Review Board team to meet supplier requirements
• Manage quality awareness environment to maintain zero defective quality and products
• Handle customer complaints, work with internal department to resolve quality issue
• Meet established guideline based on customer requirement and business agreement

Requirements:

• Degree in Quality Engineering or its equivalent
• At least 2 years related experience in supplier quality management
• Experienced in quality management system and quality tools will be an advantages
• Familiar with SAP knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R24121656

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Quality Operations Associate must assist site management to oversee the quality system execution on the manufacturing and production areas at all times.

The personnel are required to observe, document, discuss, and report quality adverse events related to the manufacturing of the product and are responsible to ensure highest quality and compliance of released batches.

Responsibilities:

• Main responsibilities include overseeing batch record review and incoming material quality audit
• Provide quality oversight of GMP manufacturing and manufacturing support, including technical operations, engineering, QC laboratory and supply chain activities
• Review completed incoming material inspection packages, Batch Records, Manufacturing Logs, product changeover/line-clearance activities and administration of Quality Logs, e.g., QA Hold, QA tag out
• Release incoming material, process, and product batches
• Participate in investigations arising out of non-compliance in incoming materials, QC testing, manufacturing processes, warehousing, and product
• Participate in change management, including change coordinator and/or QA oversight roles to ensure change plan is managed and complies with applicable policies
• Ensure site and global quality compliance
• All other responsibilities of QA Ops related.
• Any other task as assigned by Supervisor/Manager
• Based in Tuas

About You:

• Bachelor Degree with at least 1-2 years' experiences in pharma or biotech facility preferably familiar with biopharma QA Operations. Fresh graduates with GMP internship experience are welcome to apply
• Knowledge of quality management system, current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP) in a pharma or biotech facility
• Relevant QA Operations background from pharma or biotech environment is preferred
• Familiar with Health Authorities standards (e.g., FDA CFR and EU)
• Must be team player, meticulous, strong analytical and organizational skills

Duration : 06 months. Option to extend/convert subject to performance review.

Based in Tuas.

Location: Macpherson

Budget: Up to $5.5K (Depending on last drawn)

Job Scope:

• Oversee effective implementation of the Quality Management System throughout the Company.
• Coordinate the review of quality procedures associated with continuous improvement initiatives in the Plant.
• Ensure that all in-house systems and procedures are updated, revised and modified to meet statutory requirements and the needs of external certification bodies.
• Organize and manage the internal audit system and the corrective action reporting system.
• Host external Quality System audits. Manage the audit program to ensure that all nonconformities raised by certification bodies during audits are effectively corrected and independently verified.
• Communicate with personnel at all levels, internally and externally to the Company, in relation to quality system matters.
• Oversee effective implementation of Halal Quality Management System throughout the company and coordinate Halal certification programme.
• Assume the role of a Qualified Person (QP) to oversee the export process. Ensure the compliance of the export consignments with importing countries’ requirements and submit declarations to the Singapore Food Agency.

Job Requirements:

• Min. Diploma/ Degree in Food Science or any relevant field
• Must have strong knowledge of the Halal food system, GMP, HACCP, ISO 9000, ISO 22000 and food safety regulations; including gap closure on audit findings.

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

A CNC Operator has many duties and responsibilities in any field of production. Some things expected of a CNC Operator daily include:

• Read and understand blueprint designs
• Set up machinery for production
• Rework metal to create the blueprint design
• Measure and verify all calculations prior to setting up the machinery
• Maintain a clean and organized working environment
• Complete routine maintenance of their machinery
• Enter all relevant codes to specify the feed, speed, and cut of any toolpath for a CNC

. QAQC Inspector (Fabrication /Welding)

Responsibilities:

• Preparing or establishing that a welding procedure is available, has been approved as

required by the appropriate authority and is being employed in production.

• Witnessing of welder and procedure approval tests that including of the preparation of test

pieces and destructive tests and verifying compliance with appropriate standards and

specifications.

• Verification that adequate and valid welder approvals are available, and that only approved

welders as required are used in production.

• Interpretation of weld drawings and weld symbols.

• Performing of visual inspection and ensure that all finished goods are checked and approved

prior to any delivery of handover.

• Verification that post weld heat treatment has been conducted in accordance with

specification requirements.

• Appreciation of the factors influencing the formation of weld defects and their acceptability

in relation to the written specification.

• Coordination with QC Inspector (Hull/Structure and Piping) and NDT Coordinator, to verify

and ensure that all finished welds are checked and approved prior to any delivery of

handover.

• Ensure that quality assurance standards and procedures are maintained.

• Ensure that reports that are required are completed accordingly to the project

specifications.

• Liaise with Contractor, Production and Client’s representative to ensure the product is

checked and complied with the project quality plan and specifications.

• Perform any other tasks as may be assigned by the supervisor.

• Ensure compliance to relevant government regulations and company’s quality, safety, health

and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum Diploma in Engineering or relevant field of International certification (e.g. AWSCWI or CSWIP 3.1 WI).

• Physically fit since some of tasks require lifting of some equipment.

• A team player with the ability to work independently as well as in a team

• Good communication skills, meticulous, resourceful, able to multi-task

• Computer literary (MS. Office).

General Responsibilities

• Ensure that all services provided by the centres meet or exceed internal standards and quality assurance guidelines.
• Conduct audits to ensure regulatory compliance, reviewing internal processes and procedures, and identifying high-risk non-compliance areas in line with regulatory standards.
• Participate in initiatives aimed at improving the quality of early childhood care and education at the centres.
• Ensure adherence to corporate identity and guidelines across all centres.
• Ensure that the team provides a safe, nurturing environment that fosters children's social, emotional, physical, and intellectual development.
• Promptly escalate any issues or concerns to management.

Licensing and SPARK Certification

• Familiarity with the ECDC Act.
• Familiar with the SPARK QRS-U framework.
• Ensure that all centres comply with regulatory standards.
• Develop action plans to meet Licensing and SPARKS criteria.

Policies and Procedures

• Oversee, track, and monitor the centres' corrective action plans, ensuring that principals, supervisors, and staff follow through and assess the effectiveness of these actions.
• Motivate the team to achieve operational efficiency, maintaining organizational capabilities without compromising quality standards.

Requirements:

• Diploma in Early Childhood Care & Education (ECCE) or a related discipline.
• Minimum 3 years of relevant experience in the field.
• Knowledge of quality/compliance management and early childhood regulations and standards.
• Experience with quality improvement systems.
• Strong analytical skills, attention to detail, and ability to review data effectively.
• Proficient in Microsoft Word, Excel, and PowerPoint.
• Preferably a Junior Executive specializing in Quality Control/Assurance or a related role.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No. 20C0270

DESCRIPTION

This is an exciting opportunity for you to be an integral part of the Quality Management department to optimise patient care and outcome.

The Administrative Executive is responsible for providing administrative support to ensure the smooth and efficient functioning of the department initiatives within the hospital. This role involves the coordination and maintenance of accurate records, meetings, and supporting the implementation of quality management projects.

RESPONSIBILITIES

Documentation Management:

• Maintain accurate and up-to-date records related to quality management.
• Organize and file documentation in compliance with regulatory standards.

Data Entry and Analysis Support:

• Assist in data entry for quality metrics and performance indicators.
• Generate basic reports and assist in data analysis under senior staff guidance.

Meeting Coordination:

• Schedule and coordinate meetings for the Quality Management team.
• Prepare meeting agendas and distribute relevant materials.

Communication and Correspondence:

• Facilitate communication between internal and external stakeholders including team members, other departments, external healthcare institutions, among others.
• Draft routine correspondence and respond to inquiries as directed.

Assist in Quality Projects:

• Support the implementation of quality management projects.
• Collaborate with team members to ensure project timelines and deliverables are met.

QUALIFICATIONS/REQUIREMENTS

• Minimum Diploma.
• At least 2 years working experience.
• Good speaking and writing skills
• Proficient in computer skills including Microsoft Office (e.g. Excel, Words etc.)
• Self-disciplined, motivated, self-starter, Meticulous
• Ability to work collaboratively in a team environment

Interested candidates, please apply with your updated resume, expected salary and notice period.

We regret that only shortlisted applicants will be notified.

NOTE: CRAWFURD HOSPITAL IS NOT IN COLLABORATION WITH ANY EMPLOYMENT AGENCY NOR CONSULTANT FOR OUR POSITIONS OPENING.

Key Responsibilities

The successful incumbent will support the QA Manager in the following responsibilities.

• Ensure compliance with the Company’s food safety management system, QA standards, customer requirements, certification audits, and regulations for quality and food safety control processes.
• Support the Quality Assurance Manager (QAM) in preparing external and internal audits according to customer standards/contract requirements, and drive cross-functional teams to achieve targeted performance.
• Conduct site inspections to promote continuous improvement and adherence to Standard Operating Procedures (SOPs), hygiene, and food safety practices.
• Manage QA random sampling and microbiological testing for food samples, raw materials, water & ice, hand swabs, and Environmental Monitoring Program (EMP).
• Analyze data and follow up on unsatisfactory test results to identify potential causes of failure, recommend corrective actions for process improvement, and prevent recurrence.
• Prepare documentation related to all export matters in the capacity of Quality Person (QP).
• Develop training materials and conduct food safety trainings for operational staff.
• Review new product artwork to ensure regulatory compliance.
• Assist QAM in food safety incident management, including site investigations, testing, and preparation of incident reports.
• Support QAM in maintaining the ISO 22000/HACCP manual and QA documentation.
• Assist in the supplier approval program (supplier assessment/documentation review).
• Contribute to QA work plans and initiatives aimed at improving QA processes and food safety standards.
• Support Group QA, annual emergency exercises, and ad-hoc catering events as required.

Key Requirements

• Minimum Degree in Food Science/ Technology or other relevant fields.
• Minimum 2 year of QA experience in the food industry.
• Passionate in upholding food safety and possess good knowledge of Food Regulations, SFA requirements, GMP, and food safety management certifications (e.g., HACCP, ISO 22000, GFSI standards).
• Keen learning attitude, proactive, and decisive.
• Detail-oriented and meticulous with competency in report writing and presentation skills.
• Independent, committed and possess strong interpersonal communication skills
• Ability to multi task, handle stress in a fast-paced environment, and meet tight deadlines.
• Excellent interpersonal and communication skills.
• Collaborative and able to work effectively in a team.
• Must be comfortable working in a cold environment.

We highly encouraged all applicants to submit their applications via the LEGO Career Portal using this link: https://www.lego.com/en-us/careers/job/sr-supplier-quality-engineer-6f94007108221000602a9e2e02f30000

Core Responsibilities:
• Be the key person in providing high quality solutions to assigned tasks to go beyond the set goals. Cases, for example, claim/big incident handling etc.
• Perform and execute independently all assigned quality assessments and audits for potential suppliers and existing suppliers to look for and evaluate supplier quality capability improvements or upgrading opportunities and take ad hoc actions.
• Follow up & monitor with well formulated plan & steps of all audit NC status or supplier quality improvement projects to uplift supplier platform capabilities & performance.
• Follow up designed data analysis tasks, which add value to supplier performance monitoring and business/operating plan related decision-making
• Proactively involve in activities, continuously contribute on sustainable supplier platforms through understanding the company, business category’s strategies, intelligently transform things for significantly improved results

• Role authority: declare supplier quality audit result. Approve/reject supplier’s reaction for customer claim.

Do you have what it takes?

• More than 8 years working experience on quality or engineering; certified lead auditor for VDA 6.3 will be preferred
• More than 8 years on hands experience of handling quality issues or shop floor control on plastic or electronics products;
• insightful Complex global collaboration skills and key stake holder management
• Profound project management experience to be competent at global quality big case handling
• Certificated Lead Auditor for ISO 9001
• Qualified Auditor for VDA6.3（nice to have）
• Good understanding on lean and quality tools like SPC, MSA, FMEA, 8D etc.
• Reading/writing/speaking is requested frequently for English.(C1)

No relocation assistance is offered for this position

Applications are reviewed on an ongoing basis. However, please note we do amend or withdraw our jobs and reserve the right to do so at any time, including prior to any advertised closing date. So, if you're interested in this role we encourage you to apply as soon as possible.

What’s in it for you?

Here is what you can expect:

Family Care Leave - We offer enhanced paid leave options for those important times.

Insurances – All colleagues are covered by our life and disability insurance which provides protection and peace of mind.

Wellbeing - We want our people to feel well and thrive. We offer resources and benefits to nurture physical and mental wellbeing along with opportunities to build community and inspire creativity.

Colleague Discount – We know you'll love to build, so from day 1 you will qualify for our generous colleague discount.

Bonus - We do our best work to succeed together. When goals are reached and if eligible, you'll be rewarded through our bonus scheme.

Workplace - When you join the team you'll be assigned a primary workplace location i.e. one of our Offices, stores or factories. Our hybrid work policy means an average of 3 days per week in the office. The hiring team will discuss the policy and role eligibility with you during the recruitment process.

Children are our role models. Their curiosity, creativity and imagination inspire everything we do. We strive to create a diverse, dynamic and inclusive culture of play at the LEGO Group, where everyone feels safe, valued and they belong.

The LEGO Group is highly committed to equal employment opportunity and equal pay and seeks to encourage applicants from all backgrounds (eg. sex, gender identity or expression, race/ethnicity, national origin, sexual orientation, disability, age and religion) to apply for roles in our team.

Research shows that women and people from different underrepresented backgrounds often only apply for a job if they meet 100% of the listed qualifications. For all candidates, if you dream of being a part of our team and you meet many, but not all of our listed qualifications for this role, please apply.

The LEGO Group is fully committed to Children’s Rights and Child Wellbeing across the globe. Candidates offered positions with high engagement with children are required to take part in Child Safeguarding Background Screening, as a condition of the offer.

Thank you for sharing our global commitment to Children’s Rights.

Just imagine building your dream career.

Then make it real.

Join the LEGO® team today.

Job Description

• Design and drive regional Compliance consistency and minimum standards, policies and procedures.
• Identification and assessment of key compliance risks, & supporting the development of robust Compliance programs to test and monitor controls and compliance with laws, rules and regulations.
• To oversee the APAC Quality Assurance implementation and assist the continuous enhancement of the QA program regionally.
• Proactive liaison and support to Head Office Compliance function for framework design and execution.
• Identification and ongoing monitoring of key risk indicator(s) for the local and regional offices within the APAC region from Compliance’s perspectives.
• Identify regional typologies and recommend relevant standardization solution across the region.
• Proactive liaison and guidance to regional Compliance operational coordination function to ensure effective operational Compliance risk control detection mechanism across APAC region.

Job Requirements

• Bachelor's degree or above in Banking, Economics, Laws, Corporate Finance, Accountancy or Technology.
• VP : Minimum 10 years' experience in compliance, audit or other controls related function in the financial services industry.
• Director: Minimum 15 years' experience in compliance, audit or other controls related function in the financial services industry.
• Strong understanding of laws, rules and regulations and business processes.
• Strong expertise in the design and implementation of compliance programs.
• Highly motivated leader and team player.
• Strong analytical, communication and people skills, ability to lead, influence and collaborate with people across different cultures and backgrounds.
• Adaptable, resilient and passionate about making a difference.
• Mature, forward looking, subject matter expert in dealing with complex issues.

Industry: Freight Forwarding / Logistics

MNC Environment

Permanent role (AWS Guaranteed + Variable Bonus)

Responsibilities:

• Inspect aircraft spares
• Verify aircraft spares to ensure appropriate accompanying documents from the OEMs, vendors and suppliers
• Work on continuous improvement projects to improve work areas & procedures
• Facilitate periodic audits from civil aviation authorities & customers
• Maintain Shelf Life records for aircraft spares with limited life
• Monitor and conduct surveillance audits on all stores activities within the Bonded Stores
• Raise Discrepancy Reports for any discrepancies found on any aircraft spares in the Bonded Stores

Requirements:

• Work experience in the aviation industry would be an advantage
• Excellent interpersonal & influencing skills
• Proficient in Microsoft Office & presentation skills

Job ID: QX96WW7Y

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747

EA Licence Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

• Check Credit Compliance in accordance to Bank's Credit Policy and internal Policies
• Perform security and documentation compliance checks
• Check & authorise Loan Disbursements and Facilities Line implementation
• Review data entries done by maker via the various systems
• Check reports on all transactions carried out by staff

Requirements

• At least 2 years of operations experience in company credit & loan operations
• Possess relevant experience in credit control - credit compliance review per credit policy, security documentation and perfection
• Review legal guidelines, legal conveyancing, facility limit management and collateral processing
• Must be responsible, committed and diligent; Be a good team player with integrity
• Able to work under pressure especially when deadlines are tight or when there is increased volume
• Works fast and in a meticulous manner
• Strong in PC skills and Microsoft Office (Excel, Powerpoint, Word)
• Good project management, system management, interpersonal and communication skills

We are seeking a skilled CNC Programmer to join our team and play a vital role in our manufacturing process.

Responsibilities:

Analyze and interpret engineering drawings, technical documents, and production routings to ensure accurate understanding of part specifications.

Utilize Mastercam software to develop efficient CNC programs for milling operations.

Generate detailed setup sheets, tool lists, and process sheets for production reference.

Create CNC programs for horizontal and vertical milling operations using Fanuc controls.

Design and fabricate simple tools and fixtures to optimize machining processes.

Troubleshoot and resolve program errors or machine malfunctions.

Continuously monitor and improve production cycle times and associated costs.

Organize and archive all CNC programs for efficient retrieval.

Foster a collaborative and team-oriented environment to enhance both productivity and product quality.

Strictly adhere to all safety regulations and guidelines to maintain a safe work environment.

Qualifications:

Proven ability to interpret and understand 2D and 3D drawings.

Experience setting up and operating both CNC and conventional milling machines.

Proficiency in Mastercam software for CNC programming.

Minimum of 1-3 years of experience in a related manufacturing environment (preferred).

Fluency in both Chinese and English (essential).

We offer a competitive salary and benefits package. If you are a highly motivated individual with a strong attention to detail and a passion for manufacturing, we encourage you to apply!

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• Min Degree in Science / Chemical Engineering or equivalent with relevant pharmaceutical experience.
• Minimum 3 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to: [email protected]

Alex Goh Hock Leong (R1763413)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Info can be share ATM:-

• Basic UP $1400 + AWS + VB
• After probation + $50 Fixed allowance + $80 attendance allowance
• Pasir Ris
• 12 Hours Rotating Shift

Your Responsibilities: -

• Read blueprints, monitor IQC, IPQC and OQC operations
• Inspect, weigh, test, sample and measure materials with measurement equipment
• Accept, reject, segregate finished items
• Report inspection and test data
• Assist in QA administration / filing / parts reprography

You will need: -

• Possess scope, measuring equipment experience will be an added advantage
• Able to work on 12 hours, rotating shift

Apply Now or send your resume to whatsapp +65 8698 3657 (No Calling, thank)

Good Luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000