Today, Lonza is one of the world’s largest healthcare manufacturing organizations operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Key responsibilities:

• Perform system and routine maintenance activities, including but not limited to user access management, system monitoring, software configuration, backup and recovery for control systems and networks.
• Provide support to resolve control system-related issues and failures by fixing and solving them, and engage with system vendors as required.
• Identify performance and security gaps to ensure computerized system integrity and proactively seeks out improvements and solutions.
• Oversight of control system policies and procedures to ensure alignment with current regulatory requirements.
• Provide office as well as after-office hours support (based on on-call rotation) to ensure smooth operation of the control systems supporting GMP production.
• Provide assistance to Engineering Support Team, Manufacturing, MSAT department where multi-functional support is needed to address and find root causes.
• Own and perform TrackWise deviation investigations and write-up on control system failures/errors; deviation trend review and root cause analysis as required per Lonza Quality requirements.
• Own change controls to plan and implement changes within stipulated timelines, meeting GDP and GMP requirements.
• Support control systems Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT) and other site qualification activities as needed.
• You should be familiar with 21 CFR Part 11 and EU Annex 11 requirements. Also, you need to know about data integrity requirements and expectations. Additionally, you should be aware of common industry practices related to GMP computerized system administration and management.
• Support the team to ensure inspection readiness at all times.
• Perform periodic reviews with respect to user authorizations and system audit trails.
• Support Data Owners in data audit trail reviews in terms of electronic data retrieval.
• Any other duties as assigned by Supervisor / Manager.

Key requirements:

• Degree or Diploma in Computer Science, Engineering, Information Systems or a related field.
• Relevant work experience in the design, implementation and/or support of instrumentation and control systems, preferably in the Bio-Pharmaceutical, Pharmaceutical, F&B industry.
• Experience with distributed control system, software development methodologies and automated system life cycle support in a regulated industry.
• Experience with various Windows operating systems, server architecture and control system-related infrastructure fundamentals.
• Proficiency in implementing standard methodologies for automation design and code development.
• Good understanding of cGMP’s requirements particularly as they relate to the operation, validation and maintenance of computer-controlled systems.
• Strong problem-solving and analytical skills.
• A valuable teammate, capable of working collaboratively with different teams.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Job Description

• Assess the technical and commercial feasibility of the project in line with our organization's capabilities and financial considerations.
• Create cost and effort estimates to prepare technical and commercial proposals.
• Attend client briefings to establish expectations, key performance indicators (KPIs), service level agreements (SLAs), and related protocols.
• Conduct thorough site assessments to determine the actual scope of work, associated risks, and challenges.
• Plan the manpower, materials, tools, equipment, and supervision requirements for the site while considering the budget and contract specifications.
• Develop action plans to improve the effectiveness of pest management operations.
• Procure and allocate mechanized and automated equipment for pest management tasks.
• Participate in new product launches related to pest management and service enhancements.
• Schedule work for teams to ensure efficient pest management.
• Clearly communicate roles, responsibilities, and performance expectations to site supervisors.
• Offer advice on technical and workforce-related challenges related to pest management work.
• Evaluate site operations to monitor progress and allocate resources efficiently.
• Review collected data to establish or revise procedures, protocols, and guidelines for pest management on-site.
• Enforce workplace safety and health (WSH) regulations.
• Assess the risks associated with on-site pest management and establish safety procedures and protocols.
• Resolve conflicts, grievances, and disputes among staff.
• Oversee the development of staff skills and capabilities.
• Create plans to foster strong teamwork in line with the organization's core values.
• Analyze and manage significant incidents and emergencies in collaboration with relevant parties.
• Make crucial decisions to address significant incidents and emergencies.
• Review reports related to incidents and emergency situations.
• Manage and report on incident and emergency investigations.

Requirements

• Possess with at least Diploma, Degree or above in Business, Environmental, Science or related field.
• At least 5 years supervisory experience, preferrable in environmental service experience.
• Valid Pest Control License and IRATA Level 2 / 3.
• Valid Class 3 license
• Able to multi-task and work independently, with a hands-on approach to meet a tight timeline
• Able to start work immediately or within short notice
• Experience in leading and managing a business unit preferred.
• Proficient in MS Office Word, Power Point and Excel
• Good interpersonal, communication and organizational skills
• Meticulous and pro-active
• Able to work in a fast-paced environment.

ClearSK Healthcare Pte Ltd manages the award-winning ClearSK® chain of medi-aesthetic centres in Singapore, Shanghai and Hangzhou China. As a Singapore leading aesthetics chain, it will be a great opportunity for you to grow and learn in a multi-disciplinary environment with medical and management professionals. You will find yourself working in a challenging environment, where your capabilities will be developed to the maximum potential.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills

Job Responsibilities:

· Report to Financial Controller who is a qualified CPA / Chartered Accountant

· Execute the company’s inventory policy

· Manage the company’s inventory system including stock profiles and locations

· Churning of necessary daily and weekly Inventory/Purchasing reports

· Ensure incoming goods are receipted and managed appropriately in Finance aspect

· Review historical data to build timely forecasts for assigned markets

· Responsible for planning periodic stock checks via audit work and stock takes

· Perform reconciliation or audit after physical counts and liaise with business units to rectify variance

· Monitor inventory stock -cards and systems to maintain safety stock level to avoid ‘’out-of-stock’’ situations

· Audit check on stock flow accuracy

· Timely update stock movement in physical stock-card and inventory system

· Check on supplier invoices

· Assist in other financial matters

Requirements:

· Minimum Diploma or Degree in Finance, Accounting or Business fields

· 2 years of relevant experience preferably from service / hospitality / healthcare / retail industry

· Recent university or polytechnic graduates in relevant fields without work experience but with good attitude and academic records are welcome to apply.

· Candidate who are undergoing CPA training program are welcome to apply

· Experience working in fast-growing SMEs will be an advantage

· Good in planning and organising work flow, with strong in numeracy, analytical and good interpersonal skills

· Proficient in English communication and writing.

· Ability to read, write, and converse in Chinese will be an added advantage as liaising with our counterparts in China and Chinese customers.

· Enjoy working in fast-paced and dynamic environment

· A multi-tasker and learner with self-motivation and integrity

· Strong proficiency in Excel and proficient in Office applications such as Word, PowerPoint and IT systems

Rewards & Benefits

5-day work week

Medical Benefits

Opportunity to embark on Management Trainee Program

Reward and recognition program that appreciate the most competent and brightest

Promotion based on performance

Exclusive staff discounts on our products and services

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/ZdnDCJYqZ916n8iQ7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

ClearSK is an equal opportunity employer and we encourage all qualified candidates to apply.

Job Scope:

• Design and develop automated systems and processes to improve efficiency and productivity
• Program and configure automation hardware and software, including PLCs and SCADA systems
• Conduct system testing and troubleshooting to ensure optimal performance
• Collaborate with cross-functional teams to integrate automation solutions into existing systems
• Analyze data and system performance to identify areas for improvement
• Maintain documentation for automation processes, including specifications and user manuals
• Implement safety and quality standards in automated processes
• Provide technical support and training for end-users
• Stay updated on industry trends and emerging technologies in automation
• Participate in project planning and management activities, ensuring timelines and budgets are met

Requirements:

• Diploma or Degree in engineering discipline
• Minimum 3 years of experience in manufacturing industries with an automation background
• Proven track record in automation work is advantageous
• Required hands-on experience and remote support skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Support the implementation and execution of the Infection Prevention and Control Initiatives, including but not limited to the following:

• Identifies, investigates and reports healthcare facility onset infections, outbreaks, clusters and risk of infection among patients, staff and equipment through ongoing surveillance and rounds
• Provides advice on infection prevention and control related matters in accordance to hospital policies and procedures
• Collects data and maintains records for infection prevention and control related surveillance and clinical incident
• Organizes and undertakes audits of assigned wards to ensure that infection prevention and control related procedures are being carried out in accordance with hospital policies
• Deliver infection prevention and control training to patients and staff

Requirements

• Minimum Diploma in Nursing with 2 years' relevant clinical practice as a Registered Nurse
• Formal infection prevention and control training or appointment as an Infection Prevention and Control Nurse preferred

Job Responsibilities:

• Responsible for carrying out daily pest control activities according to operational schedule at client site(s)
• Monitors and responds to customers’ feedback
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Job Requirements:

• Must possess Class 3 Driving Licence.
• Willing to OT

We regret to inform you that only shortlisted candidates will be notified.We wish you all the best in your career search.

EA Personnel Name: Hannah Ching Ning Xin

EA Personnel No: R22108651

EA Licence No.: 23C1828

Job Description

• Strong hands on experience in BMC Control M - Administration is Must

• Excellent communication skills,

• Ability to Empathize, pacify and handle Irate Customers with Exceptional communication skills.

• Technical Knowledge in Troubleshooting Base Operating system Issues and eager to learn New Technologies.

• Troubleshooting Windows, Outlook, Teams, Citrix. VDI, VPN, Security App etc. over Remote Support

• Answer incoming calls and respond to customer’s emails in timely manner.

• Manage and resolve customer complaints.

• Identify and escalate issues to supervisors as and when needed.

• Provide product and service information to customers.

• Research required information using available resources and Offer Solution to customers.

• Research, identify, and resolve customer complaints using applicable software.

• Route calls and tickets to appropriate resources and Domains who can best support he user,

• Document all call information according to standard operating procedures.

• Recognize, document, and alert the management team of trends in customer calls.

• Create SOPs for new Issues and resolution given.

• Complete call logs and reports.

Job Scope:

· To assist Fumigator in carrying out fumigation & pest control services in accordance with regulatory requirements

· Notify Supervisor immediately of all incidents which are of material importance to the company such as accidents/near-misses/safety breaches/customer complaints followed by written report

· Check and ensure that all material/equipment/resources required for the day's work is available in the vehicle and in good working condition

· Always maintain sufficient stock of supplies and to submit requisition for replenishment if stock runs low.

· Maintain all equipment on board the vehicle in good working condition and to report damages/uncalibrated items immediately

· To ensure accurate reporting of fumigant stock in the vehicle at the end of each working day

· To be able to manage client's expectations and requests at work site and perform decision making if the team is able to accede to the demands within their limits, else TL will need to escalate to the Supervisor

Requirement:

1.) Driver’s License (Class 3) Required

2.) Vector Control Technician Licence

3.) Completed the following training

a.) Forklift Driver’s Licence

b.) Scissor lift Certificate

c.) Basic First Aid Course Certificate

d.) WAH Supervisor Certificate

4.) Fluency in spoken & written English

5.) Good planning and time management skills

6.) Physically Fit

7.) Ability to work in Teams, and supervise junior technicians and assistants

8.) Good interpersonal skills

9.) Good customer service skill

We believe that challenges are best solved together. That’s why, when you join us, you become part of a diverse and global community of problem-solvers. You'll find an unexpected mix of people who bring their unique expertise to build trust in society and tackle important issues. Here, we welcome and encourage you to lead with value and inspiration, question and challenge assumptions, as well as embrace new opportunities to deliver quality outcomes in exciting and unexpected ways, all with the support of technology.

Our Financial Services Assurance Practice works with organisations to strengthen trust and transparency by building, maintaining and providing trust over financial reporting in a fast changing, technology-driven world. As Asia’s top financial services practice, our audit approach is at the leading edge of best practice. We draw upon our extensive industry knowledge for our clients including top blue chip companies in the asset management, banking, capital markets, and insurance sectors. We provide our clients with insights, empowered by leading technologies, into marketplace developments and global opportunities.

Key responsibilities:

• Involvement in a broad range of statutory audit assignments for our financial services clients
• Potential involvement in selected advisory assignments which could include providing advice on accounting for complex arrangements and instruments, internal control & risk management reviews, financial due diligence and transactions support (amongst others)

Requirements:

• Degree holder in any discipline
• Professionally qualified preferred
• Min. 1 year and above of relevant experience with an international public accounting firm, with extensive experience in statutory and regulatory audits of Banking & Capital Markets, Insurance and Asset Management clients
• Strong interpersonal, written and verbal communication skills
• Excellent team working skills

*Only shortlisted candidates will be notified due to the high number of applicants for this role.

Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

We believe that challenges are best solved together. That’s why, when you join us, you become part of a diverse and global community of problem-solvers. You'll find an unexpected mix of people who bring their unique expertise to build trust in society and tackle important issues. Here, we welcome and encourage you to lead with value and inspiration, question and challenge assumptions, as well as embrace new opportunities to deliver quality outcomes in exciting and unexpected ways, all with the support of technology.

Our Financial Services Assurance Practice works with organisations to strengthen trust and transparency by building, maintaining and providing trust over financial reporting in a fast changing, technology-driven world. As Asia’s top financial services practice, our audit approach is at the leading edge of best practice. We draw upon our extensive industry knowledge for our clients including top blue chip companies in the asset management, banking, capital markets, and insurance sectors. We provide our clients with insights, empowered by leading technologies, into marketplace developments and global opportunities.

Key responsibilities:

• Involvement in a broad range of statutory audit assignments for our financial services clients
• Potential involvement in selected advisory assignments which could include providing advice on accounting for complex arrangements and instruments, internal control & risk management reviews, financial due diligence and transactions support (amongst others)

Requirements:

• Degree holder in any discipline
• Professionally qualified preferred
• Min. 2 years and above of relevant experience with an international public accounting firm, with extensive experience in statutory and regulatory audits of Banking & Capital Markets, Insurance and Asset Management clients
• Strong interpersonal, written and verbal communication skills
• Excellent team working skills

As part of our recruiting process, interested candidates are to complete an application through our career website at https://www.pwc.com/sg/careers.html

*We regret that only short-listed candidates will be notified.

- To carry out rodent treatment at town council estate .

- To performs any other related duties as instructed by the immediate superior

- With / without experience are welcome to apply , training will be provided .Retiree are welcome .

- Able to read / write / speak in simple English

- Physically Fit

- work week : 5.5 days

Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Check Credit Compliance in accordance to Bank's Credit Policy and internal Policies
• Perform security and documentation compliance checks
• Check & authorise Loan Disbursements and Facilities Line implementation
• Review data entries done by maker via the various systems
• Check reports on all transactions carried out by staff

Requirements

• At least 2 years of operations experience in company credit & loan operations
• Possess relevant experience in credit control - credit compliance review per credit policy, security documentation and perfection
• Review legal guidelines, legal conveyancing, facility limit management and collateral processing
• Must be responsible, committed and diligent; Be a good team player with integrity
• Able to work under pressure especially when deadlines are tight or when there is increased volume
• Works fast and in a meticulous manner
• Strong in PC skills and Microsoft Office (Excel, Powerpoint, Word)
• Good project management, system management, interpersonal and communication skills

RESPONSIBILITIES:

• Develop and update the quality material database and ensure proper recording and documentation
• Ensure proper documentation of raw materials/ ingredients/ finished products & traceability in place
• Liaise with regulators on mandatory requirements and compliance related matters
• To provide internal and external customers with technical advice and/or documentation when required
• Assist in the maintenance of HACCP and BRCGS management system

REQUIREMENTS:

• Diploma / Bachelor's Degree in Food Science or related field.
• Good knowledge of Quality Management System (HACCP, BRC, ISO 22000)
• Good communication, Organizational and Analytical Skills
• Able to work in a team and independently

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

About Moore

At Moore, our purpose is to help people thrive – our clients, our people, and the communities they live and work in. We are a global accounting and advisory family with over 37,000 people in 558 offices across 114 countries, connecting and collaborating to take care of the needs of our stakeholders - our clients, our people and the community at large - at local, national and international levels.

When you work with Moore firms, you will work with people who care deeply about your success and who have the dedication to develop you to the full potential. In Moore Stephens LLP, you will be part of a business transformation process in the creation of a unique firm.

About the role

You will have the opportunity to help shape, influence and drive the business of the Firm. We are looking for ambitious candidates who can and wish to make a difference. Your personal development needs will be provided for by the Firm. Audit Directors will be groomed to be admitted as Partners under the Firm’s fast track programme. Direct admittance to Partnership is envisaged for the right candidates.

Responsibilities:

• Lead a team of audit professionals and manage a portfolio of audit clients
• Oversee proper execution of external audit engagement including planning, execution of fieldwork and review of audit engagements
• Develop and maintain client relationships develop new business opportunities
• Involvement in functional areas and development of new service lines

Requirements:

• A recognized degree in Accountancy or professional accounting qualifications such as ACA, ACCA, CPA, Australia or equivalent
• Experience in shipping industry is an advantage
• Relevant experience with large/medium size public accounting firms
• Excellent communication, technical and interpersonal skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Summary Benefit:

• Salary range: $2000-$2800
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Summary Benefit:

• Salary range: $2000-$2500
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)