Essential Duties and Responsibilities:

1. Quality Assurance and Control:

• Develop, implement, and maintain quality assurance plans, procedures, and control measures.
• Monitor and analyse production processes to detect and resolve quality issues.
• Ensure compliance with relevant regulatory requirements, including FDA, ISO 13485, and other applicable standards.
• Support internal and external audits and regulatory inspections.
• Investigate and resolve product-related issues, deviations, and non-conformities, with the authority to recommend corrective and preventive actions.
• Ensure the non-conformance or quality issue is resolved and complete in a timely manner.
• Participate in new product introductions to ensure quality is built into all products early in their life cycle
• Support validation processes including IQ, OQ, PQ, process validation and test method validation.

2. Process Improvement

• Identify opportunities for process improvements to enhance product quality and manufacturing efficiency.
• Lead and drive QA initiatives across the product areas
• Lead or participate in root cause analysis and corrective action planning.
• Support and drive cost improvement project

3. Customer Interaction:

• Address customer complaints and feedback related to product quality.
• Work closely with customers to understand their quality requirements and ensure that products meet their specifications.
• Communicated on any potential change request of the processes to customer.
• Provide technical support and quality-related information to customers.

4. Documentation and Reporting:

• Maintain comprehensive records of quality control activities, inspection results, and non-conformance reports.
• Prepare and support monthly / annual quality reports to management and other stakeholders.
• Ensure proper documentation and traceability throughout the manufacturing process.

5. Training and Development:

• Train manufacturing staff on quality standards, procedures, and best practices.
• Promote a culture of quality and continuous improvement within the organization.

Education/Experience and Qualifications:

• Degree in Engineering or science, with 2 - 5 years of progressive Quality responsibility, preferably in medical device / pharmaceutical manufacturing.
• Diploma holders in Engineering or science with more than 5 years' experience in Quality are welcomed to apply
• Knowledge of regulatory requirements and quality standards, including FDA regulations and ISO 13485 standards.
• Strong analytical and problem-solving skills, with the ability to troubleshoot complex issues.

Job Purpose

You will be part of the Regional Agency/FA and Bancassurance team to actively develop new client acquisition to support our affluent and HNW business growth, specifically on regional wealth.

The Job

· Identify and introduce high-value, high net worth clients to GE, leveraging professional networks and relationships to drive referrals and expand GE client base. Primary market focus to be China, India and ASEAN.

· Work closely with agency partners to provide and deliver a total wealth management experience to new- to-company clients.

· Proactive management, supervision and monitoring of new clients onboarded.

· Facilitate and support customers’ purchase journey via licensed financial representatives within assigned agency team.

· Takes accountability in considering business and regulatory compliance risks and takes appropriate steps to mitigate the risks.

· Ensure that transactions are compliant with governing laws and ethical standards, and comply to all applicable policies and procedures

· Maintains awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company.

· Highlights any potential concerns /risks and proactively shares best risk management practices.

Our Requirements

· Minimum 3 years of proven track record in sales acquisition or business development experience in the high net worth space.

· Tertiary Education, preferably Bachelor’s degree.

· Strong new relationship building skills.

· Possess a sharp business development focus and demonstrative innovative approaches.

· Able to anticipate client requests/needs and resolves queries in a timely manner.

· Highly driven and positively motivated.

· Effective communication and interpersonal skills.

· Polished and mature to handle the affluent market segment.

About Great Eastern

Established in 1908, Great Eastern places customers at the heart of everything we do. Our legacy extends beyond our products and services to our culture, which is defined by our core values and how we work. As champions of Integrity, Initiative and Involvement, our core values act as a compass, guiding and inspiring us to embrace the behaviours associated with each value, upholding our promise to our customers - to continue doing our best for them in a sustainable manner.

We work collaboratively with our stakeholders to look for candidates who exhibit or have the potential to embrace our core values and associated behaviours, as these are the key traits that we expect from our employees as they develop their careers with us.

We embrace inclusivity, giving all employees an equal opportunity to shine and play their role in exploring possibilities to deliver innovative insurance solutions.

Since 2018, Great Eastern has been a signatory to the United Nations (UN) Principles of Sustainable Insurance. Our sustainability approach around environmental, social, and governance (ESG) considerations play a key role in every business decision we make. We are committed to being a sustainability-driven company to achieve a low-carbon economy by managing the environmental footprint of our operations and incorporating ESG considerations in our investment portfolios; improving people’s lives by actively helping customers live healthier, better and longer; and drive responsible business practices through material ESG risk management.

To all recruitment agencies: Great Eastern does not accept unsolicited agency resumes. Please do not forward resumes to our email or our employees. We will not be responsible for any fees related to unsolicited resumes.

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Automation Electronics Manufacturing Company

Job Scope

• Analyze project requirements for industrial robotic equipment/machines.
• Design, and test electrical control systems for industrial automation.
• Create detailed electrical schematic drawings using E3 (or ePLAN as a second option).
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Provide on-site technical support during the installation and commissioning of robotic equipment/machines.
• Troubleshoot and resolve electrical and control system issues.
• Maintain detailed documentation throughout the project lifecycle.

Requirement

• Degree in Electrical Engineering / Control Systems Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation
• Experience in programming motion controllers, robots, or touch panels is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Monday– Friday)

• Variable Bonus + Excellent Welfare

• Well Established Industrial Automation Company (MNC)

Job Scope

• Design, develop, test, and debug robust and efficient industrial automation software using C++ , C#
• Utilize Windows API and libraries for interaction with hardware components.
• Program machine functionalities using motion control cards (MCCs) for precise movement control.
• Integrate with distributed I/O systems to gather sensor data and control actuators.
• Implement robust communication protocols for data exchange between software and hardware components.
• Leverage advanced threading techniques and synchronization mechanisms for optimal application performance.
• Employ advanced memory management practices, including memory-mapped files, file
• mapping objects, and memory sections, to ensure efficient resource utilization.
• Utilize the C++ Standard Library and templates effectively for code optimization and reusability.
• Understand and utilize Windows objects like events and mutexes for thread synchronization and communication.
• Write well-documented, maintainable, and efficient code adhering to best practices.
• Collaborate with electrical engineers and mechanical engineers to understand system requirements and ensure software meets functional specifications.
• Participate in code reviews and provide constructive feedback to fellow developers.
• Stay up-to-date with the latest advancements in C++, industrial automation technologies, and relevant libraries.

Requirement

• Bachelor’s Degree in Computer Science / SoftwareEngineering or other related field
• 5 to 8 years of relevant experiences in developing industrial automation software using C++, C#
• & WPF
• Proven experience with programming motion control cards and distributed I/O systems
• Strong understanding of Windows API development and memory management techniques

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description & Responsibilities

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Ensure the overall document control system supports the QMS.
• Work with technical team to create quality document related to product design, development, and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Lead auditor for internal and external audits.
• Conduct management review, ensure QMS stays current and relevant.
• Lead in root cause analysis and CAPA.
• Analyze trends inquality performance.
• Drive improvement in the quality management system.

Job Qualifications

• At least a Master's degree in Science/Engineering or relevant related field.
• Possess at least 4 years of working experience in quality assurance in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development, and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Strong background in biomedical, computer or engineering sciences.
• Awareness of applicable workplace environment, health, and safety regulations.
• Possess creative skills and problem-solving skills.
• Adeptness in cultivating professional networks and build strategic partnerships.
• Good communication skills.
• Demonstrates strong leadership capabilities and an agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description & Responsibilities

• Maintenance of Quality Management System ensuring compliance to internal, and international standards and regulatory requirements for medical devices.
• Develop QMS documents in line with business activity of DxD Hub.
• Ensure the overall document control system supports the QMS.
• Work with technical team to create quality document related to product design, development, and manufacturing, including product test/validation protocols, change management in compliance to applicable regulatory requirements.
• Lead auditor for internal and external audits.
• Conduct management review, ensure QMS stays current and relevant.
• Lead in root cause analysis and CAPA.
• Analyze trends inquality performance.
• Drive improvement in the quality management system.

Job Qualifications

• At least a Bachelor’s degree in Science/Engineering or relevant related field.
• Possess at least 4 years of working experience in quality assurance in medical devices; thorough working knowledge of ISO 13485:2016.
• Good working knowledge in managing QMS in a medical device environment in compliance to ISO 13485:2016.
• Competent in quality assurance methodologies.
• Working knowledge in QA processes for design, development, and manufacturing of IVD, SaMD and Integrated Medical Technologies.
• Demonstrated skills in risk management (ISO 14971).
• Knowledge in regulatory requirements for medical devices in ASEAN, USA and EU.
• Strong background in biomedical, computer or engineering sciences.
• Awareness of applicable workplace environment, health, and safety regulations.
• Possess creative skills and problem-solving skills.
• Adeptness in cultivating professional networks and build strategic partnerships.
• Good communication skills.
• Demonstrates strong leadership capabilities and an agile mindset.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

1. Assist corporate clients in the establishing, implementation and maintenance of management system in accordance with various international and local standards such as ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 22000:2018, FSSC 22000, bizSAFE certifications,etc.
2. Provide professional advice and guidance to organization seeking consultation services.
3. Plan and execute project in accordance with client’s requirements
4. Able to work independently as will be working from home.
5. Conduct consultation at client premises.
6. Conducting internal audits and preparation of audit report
7. Any other duties as required by the Compan

Job Requirements:

1. Diploma or Degree in food science or food technology or safety and health related.
2. Minimum 1 years of working experiences in QEHS. Preferred those with experienced on QEHS / food safety consultancy and Quality, Environmental, Safety & Health experience.
3. Able to work independently and meet to each project timeline and deadline.
4. Candidate should be self-motivated and hardworking.
5. Candidate should be able to communicate effectively and interact with corporate clients.

About our client: Our client is an international engineering and project management consultancy that specializes in infrastructure and environmental projects.

*Please note that this role will be hired on a contract basis to support our client's project.

*Work Location: Tuas

About the role: The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities.
• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: R1325507

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg. No: R1325507

Responsibilities:

• Provide support in both AP & AR functions
• Entry level of accounting works & data entries
• Prepare sales invoices and reports
• Prepare outgoing payments through internet banking and manual check payments
• Prepare and maintain accounting documents and records
• Assist in daily administrative works
• Any ad-hoc duties as assigned

Requirements:

• Diploma in Accounting or equivalent
• Good knowledge of accounting and bookkeeping
• 1 year of relevant accounting experiences preferred
• Fresh graduate welcomed to apply
• Proficient in MS Office
• Organized and Meticulous
• Team player with positive working attitude

• Driving license class 2B, 3A, 3.
• Min. 3 years experiences
• Maintaining tools, equipment, and your vehicle daily.
• Recommending preventive measures to clients.
• Building/premise inspection for signs of pest infestations
• Recommend ideal solution for immediate treatment and extermination of pests
• Fill out service report
• carrying out daily pest control activities according to operational schedules
• Knowledge and usage on equipment, chemicals, and pesticide/insecticide products

Familiar with PVC card making process.

To have relavant experience for at least three to five years.

Perform risk study to understand the extend of the potential risk.

Discuss complext matters with the upper management.

Ensure that workers comply with safety rules and regulations.

Identify and resolve the complex line issues. Perform other related responsiblities.

Able to operate PVC card printers & related software.

Repair of card printers.

Liaise with current and new customers on the leadtime of project upon confirmation.

Attend to queries related to machine repair.

Job Descriptions:

• This position reports to the team lead and requires working with the team, responsible in performing day-to-day checking of invoices in compliance with financial policies and procedures in a timely and efficient manner.
• He/She will also perform data entry in excel and other simple ad hoc tasks as assigned by the team lead in the invoice processing team within division.

Period:

• immediate till 31 January 2025

Location:

• Tampines

Working Hours:

• Monday – Friday: 9.00am to 6.30pm

Salary:

• up to $2,500

Job Requirements:

• Minimum O level with relevant work experience or diploma in related field of study

In lieu of physical interviews, we will be conducting virtual interview, i.e. Skype/WhatsApp/Facetime/Zoom

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No: R1107390)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)
3 Shenton Way, Shenton House

#19-01, Singapore 068805
T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines.

This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations.

The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description & Requirements

· Responsible for the engineering of electrical and control system.

· Ensure compliance to required local codes and project specifications.

· Panel wiring and it design

· PLC programming

· Testing and commissioning of electrical system

· Review the commissioning work processes to enhance efficiency and productivity

· Proficient with the testing procedures and applicable rules and regulations of regulatory bodies

· Coordinate with all sections for testing/ commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

· Develop & improve on design of electrical switchboard & control panels;

Experience & Certifications

· Minimum Degree in Electrical Engineering.

· Preferably with at least 3-5 years’ of experiences in water/wastewater environment.

· Demonstrate experience in troubleshooting and problem solving in the Electrical and Instrumentation area.

· Strong experience and ability to read and interpret electrical drawings, single line, schematics, and specifications.

· Ability to interact effectively and positively with all levels of personnel, customers, vendors and visitors.

· Proficient with MS Office and related Engineering Software (such as Siemens SIMATIC, AutoCAD, Eplan).

· Proficient in English language, both oral and written.

· Ability to work well both independently and as a team.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a Specialist you will be responsible for support and administration (system back-up, user access administration) for LIMS, MODA and other related Laboratory computerized systems. This role also requires to process the LIMS and MODA static data requests

Responsibilities

• Support and administration (system back-up, user access administration) for Sample Manager LIMS, MODA LIMS, iLAB, and other related Laboratory computerized systems
• Maintenance of LIMS static data (Sample Manager LIMS, MODA LIMS and STATISTICA systems)
• Support for installation and qualification/ validation of software related aspects of computerized instrumentation
• Actively contributes to operational efficiency/continuous improvement initiatives.
• Support system audit trail review all related Laboratory computerized systems
• Maintenance of software related changes to computerized instruments
• Server and database maintenance and administration as relates to laboratory systems
• Provide training for the roll-out of new computerized systems.
• Generation and execution of computer validation documentation (protocols and reports)
• Can identify computer related issues; troubleshoot, identify and complete or coordinate deviation, change control and/ or corrective action records.
• System/ equipment manufacturer and or vendor interaction as required in order to trouble shoot system issues.
• Available to troubleshoot and resolve critical system issues as they occur.
• Experience manages projects (people/ team environment) to meet the timelines.
• Customer and regulatory agency interaction as required.
• Oversight of computer system policies and procedure in order to ensure policy is aligned with current regulatory expectations.
• Familiarity with 21 CFR Part 11 and EU Annex 11 requirements, data integrity requirements and expectations as well as common industry practice with respect to laboratory computerized system management and administration.
• SME in 1 or more areas as aligned with training plan.

Experience

• Degree/Diploma in relevant Science field or Equivalent
• Minimum 5 years of experience
• Relevant work experience preferably Lab related IT experience in a biotech or medically related field.
• Experience in lab computer systems essential (prefer experience with LIMS, and CDS –Chromatography Data Systems

​

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

R63209

Job Responsibilities:

• Report on QA events related to maintenance of aseptic conditions within clean rooms with a focus on Sterility Assurance during manufacturing operations
• Assist in generating procedures related to Manufacturing QA functions / activities
• Periodically review records to verify that quality standards for each product is met
• Prepares weekly/monthly reports, prepares metrics and trends data to identify and prioritize continuous improvement opportunities
• Responsible to maintain all testing equipment in compliance, calibration and certification.
• Promptly communicates with Operations regarding complaints, product issues/variances.
• Assists in maintaining compliant controlled substance documentation specifically associated with sample handling and reconciliation
• Enforce compliance with QA processes, Equipment Qualification, and Computer System Validation principles.
• Assist in the development of action plans and implementation schedules, and the verification of completed actions.
• Conduct periodic internal reviews or audits to ensure that compliance procedures are followed.
• Conduct and report the findings of internal investigations of compliance issues.

Job Requirements:

• Degree in Chemistry, Biochemistry, Biotechnology or Diploma in Chemistry, Biochemistry, Biotechnology.
• Demonstrated ability to collaborate with cross functional or cross sites to achieve objectives.

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Esther Lim Suk Hui

EA Personnel No: R18728082

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Infineon is a world leader in semiconductor solutions that make life easier, safer, and greener. Our solutions for efficient energy management, smart mobility, and secure, seamless communications link the real and the digital world. We are currently seeking a dedicated and experienced Outsourcing Supplier Quality engineering experts with wafer fabrication environment and process experience to join our experienced team, connected with a worldwide cross functional team and play a crucial role in Supply Quality management and target for highest quality standards and zero defect, If you are passionate about quality and technology and problem solving, we look forward to your application.

In your new role you will:

• Drive and response suppliers’ quality stability ( Cpk ) and improvements through statistical process control (SPC), 8D review , and define the continuous improvement plans (CIP).
• Regularly review suppliers quality index and define continue improve actions. Co-work with QSM ( Quality System Management ) team for establish key performance indicator that comprehensive measure factory quality performance.
• Take leader role and investigation and perform problem solving for root cause investigation in Task-force or MRB team for Quality crisis.
• Be a member of the yield management team that interacts with the suppliers during working meeting.
• Interface with Infineon Reliability and Quality team for reliability monitoring plan/execution.
• Member in supplier change review board (PCRB) as a final change releaser and review the change risk assessment
• Participant supplier surveillance audit (VDA 6.3) and end customer audit
• Work in an international environment and interface with BU ( Business Unit) QM.
• Dispose owner for the nonconforming product in supply chain.
• Co-work with Infineon Operation team for end-customer return (FAR) follow up and lesson learn Fan-out ( Read-Across ) execution.
• Monitor and join review with development and transfer team for the quality performance from NPI project and support product-based qualification activities and communication with Infineon individual BU ( Business Unit )

You are best equipped for this task if you have:

• Bachelor/Master of Science in Physics, Material, Electrical Engineering, Quality Engineering or related field or equivalent practical experience is preferred.
• Min 7 years working experience as a Quality ( Quality system or Quality Engineering or Quality Assurance ) or Process Integration or Product Engineering and customer service engineering in front end wafer process or supplier chain management of foundries.
• More than 3 years quality related management will be plus especially at automotive industry.
• Strong systematic thinking, good attitude and advanced knowledge of statistical analysis and quality core tools ( SPC, FMEA, 6-sigma, 8D ) and strong problem-solving skills ( tool and method ).
• Knowledge in functional area with deep knowledge in wafer manufacturing is needed.
• Good language proficiency in English, additional language skills are a plus to work with counter parts located globally
• An open and creative mind, which likes to work independently, is self-motivated and is eager to learn and grow .
• Positive attitude and passionate with a proactive nature. Proactive, detailed in figures & have Can-do attitude
• Good communication skills with global cross functions, an excellent task coordinator skill is need. Team spirit to own your fair share of routine tasks. Ability to effectively present information and respond to questions from groups of managers, customers and engineering team members
• Ability to travel as required.

#WeAreIn for driving decarbonization and digitalization.
As a global leader in semiconductor solutions in power systems and IoT, Infineon enables game-changing solutions for green and efficient energy, clean and safe mobility, as well as smart and secure IoT. Together, we drive innovation and customer success, while caring for our people and empowering them to reach ambitious goals. Be a part of making life easier, safer and greener.
Are you in?

We are on a journey to create the best Infineon for everyone.
This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant´s experience and skills.
Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process.

We are seeking for a dedicated Sustainability Professional to join our team. As a key member of our organization, you will be responsible for developing and implementing sustainable practices that align with our commitment to environmental, social and governance (ESG) responsibility. The ideal candidate will possess a strong background in sustainability, passion for driving positive change, and the ability to collaborate with various stakeholders.

Responsibilities

• Collaborate with cross-functional teams to drive sustainable practices into daily operations and business processes
• Analyze and report on key sustainability metrics, communicating progress and impact through the Annual Sustainability Report, Employee Townhall, K&S website and to the ESG Council
• Disclose sustainability information through customer surveys, ESG questionnaires and identify ESG gaps for closure
• Coordinate and report on initiatives to reduce environmental impact, eg. energy consumption, carbon emissions, paper usage, water usage and waste recycling
• Support the development of interactive online ESG training courses
• Manage the administration of the Quality Portal
• Support Product Compliance program and Go Green Team objectives
• Collaborate with K&S Corporate Social Responsibility (CSR) representatives, non-profit and government organizations to support CSR initiatives

Requirement

• Bachelor's degree or above in Environmental Science, Sustainability, or Engineering or Diploma in Sustainability Management or with relevant experience
• Knowledge of sustainability reporting standards, carbon footprint measurement and/or environmental regulations
• Proficiency in Microsoft Excel for data processing
• Excellent interpersonal and communication skills
• Experience in sustainability engineering, environmental management, or a similar role within a corporate setting is desirable
• Preferred knowledge in risk assessments, life cycle assessment and management system frameworks (ISO 9001, ISO 14001 and ISO 45001)

Responsibilities

• Design and implement comprehensive test plans, test cases, test data and test scripts to ensure the quality of software products.
• Collaborate with Product Owners and stakeholders to define test objectives, scope and entry/exit criteria for testing phases.
• Perform system testing (e.g., functional and performance testing).
• Develop and maintain automated test scripts and tools.
• Review and analyse test results, identify defects and anomalies and work closely with the stakeholders to resolve issues.
• Continuously improve the software testing process by identifying areas for improvement in testing practices and tools.

Requirements

• Strong background in Computer Science, Computer Engineering, Information Systems Management, Information Technology or related disciplines.
• experience in software quality assurance testing.
• Strong knowledge of software testing methodologies, tools and processes.
• Experience with test automation tools such as Selenium or similar.
• Experience in performance testing tools such as JMeter or similar.
• Experience with programming languages such as Java, Phyton, or similar.
• Experience in issue management and continuous integration tools such as Jenkins, JIRA, or similar.
• Familiarity with Agile development methodologies and experience working in Agile teams.
• Familiarity with cloud-based testing tools, knowledge of security testing methodologies.
• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills and strong collaboration skills.

Description
We are seeking an experienced and highly motivated Healthcare Quality Manager to join our dynamic team to oversee and enhance the quality standards across our clinical and operational processes. This role offers a unique opportunity to work closely directly with the CEO and top-level management and contribute to the company's strategic vision within the healthcare industry. This role will be responsible for ensuring compliance with healthcare regulations, improving patient care outcomes, and optimising operational efficiency. The ideal candidate will bring a strong background in healthcare quality management, a passion for continuous improvement, and the ability to drive initiatives that ensure the highest standards of care.Develop, implement, and maintain quality assurance programs tailored to the clinical and hospital environment.
Collaborate with clinical teams, operational managers, and leadership to identify areas for improvement and implement evidence-based solutions.
Conduct thorough audits, inspections, and evaluations to ensure clinical processes adhere to regulatory standards (e.g., Joint Commission, CMS).
Analyse clinical data and operational metrics for trends and performance anomalies, driving quality improvements in patient safety and care outcomes.
Ensure the quality and efficiency of clinical operations, working closely with relevant teams to align with industry standards and patient care goals.
Provide detailed reports and direct feedback to executive leadership regarding quality metrics and clinical outcomes.
Oversee and audit clinical and operational quality, ensuring that all procedures meet healthcare regulations, standards, and internal policies.
Develop, implement, and monitor quality assurance and improvement plans across all departments.
Ensure compliance with all regulatory bodies (e.g., JCI, Ministry of Health) and maintain up-to-date knowledge of relevant regulations.
Lead the organisation in accreditation and certification processes, including preparation and follow-up on assessments.
Collect, analyse, and present quality performance data, providing actionable insights to drive continuous improvement.
Implement and track key quality performance indicators (KPIs) for both clinical outcomes and operational efficiency.
Facilitate training programs to ensure staff understand and adhere to quality standards and best practices.
Foster a culture of safety, quality, and compliance throughout the organisation.
Conduct regular internal audits to monitor compliance with internal and external standards and recommend corrective actions where needed.
Stay updated on industry trends and best practices in healthcare quality management to continuously refine and improve processes.

Requirements
A minimum of 6 years of proven experience in clinical operations and quality management, or similar role in the healthcare sector.
Strong knowledge of QA methodologies, tools, and regulatory standards applicable to healthcare.
Experience designing, implementing, and managing quality assurance programs in compliance with healthcare regulations.
Excellent communication skills with the ability to work collaboratively with healthcare professionals and influence decisions at a senior management level.
Strong analytical skills with a focus on data-driven decision making in clinical operations.
Familiarity with regulatory bodies such as the Joint Commission, CMS, and other healthcare compliance standards.
In-depth knowledge of healthcare regulations, quality standards, and accreditation processes.
Strong analytical and problem-solving skills, with the ability to interpret complex data and provide actionable recommendations.
Excellent interpersonal and communication skills, with the ability to work collaboratively across teams.
Certification in Healthcare Quality (e.g., CPHQ, Lean Six Sigma, or equivalent) is preferred.
Strong project management skills with the ability to lead initiatives from conception to completion.
Familiarity with quality improvement methodologies (e.g., Plan-Do-Study-Act, Lean, Six Sigma).

Benefits
Work in a diverse environment with people from over 10 countries
A generous leave policy
Work flexibility
Medical coverage
Annual Wage Supplement (Bonus)
Christmas Leave (The team takes the whole Christmas week off separate from our leave policy)
Birthday Leave (1 day)
Holidays off
Quarterly mental health day off
Mental health benefits (Premium access to our app!)
Work-life balance and employee wellness
Regular social events where we have non work-related fun

Apply for this job

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Salary: Up to S$8,500 (base) excluding oversea allowances

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Quality Monitoring & Yield Optimization: Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Abnormal Quality Management: Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Process & Quality Control Enhancement: Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Customer Quality Assurance: Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Inspection Process Optimization: Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Cross-Department Collaboration: Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Team Leadership: Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Salary: Up to S$8,500 (base) excluding oversea allowances

Job Summary:

• We are looking for an experienced Senior Supplier Quality Engineer (SQE) to lead quality initiatives across our supplier network for thermal cooling solutions in the electronics and computing sectors, with an emphasis on mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. The successful candidate will ensure supplier quality and process reliability, collaborating closely with suppliers to meet our high standards for product excellence in both electrical and mechanical components.

Key Responsibilities:

• Supplier Quality Monitoring & Improvement: Develop and implement systems to monitor supplier quality, ensuring that materials, components, and mechanical parts (e.g., stamped, forged, and machined metals) comply with quality standards. Identify and resolve non-conformance issues with suppliers.
• Supplier Process Optimization: Work together with suppliers to optimize their processes, including metalworking processes such as CNC machining, milling, die casting, forging, and stamping, improving yield and ensuring consistent quality of materials and components.
• Abnormal Quality Issue Management: Take charge of addressing and resolving abnormal quality issues, especially in mechanical processes, by implementing corrective and preventive measures.
• Supplier Audits & Compliance: Perform audits to evaluate suppliers' quality systems, including their capabilities in metalworking and mechanical processes, ensuring adherence to industry standards. Initiate improvement actions based on audit results.
• Supplier Development: Collaborate with suppliers to enhance their mechanical quality processes and tooling designs (fixtures and jigs), ensuring alignment with company standards and customer expectations.
• Cross-Functional Collaboration: Facilitate seamless communication and alignment on both mechanical and electrical quality expectations by coordinating with design, production, and procurement teams.
• Continuous Improvement: Foster a culture of continuous improvement by partnering with suppliers to enhance their quality management systems, particularly in mechanical manufacturing practices such as tooling, fixture design, and metalworking.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or mechanical quality control, particularly in a manufacturing or electronics industry setting.
• Hands-on experience with mechanical manufacturing processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling, including the design and manufacture of fixtures and jigs.
• Proven experience in supplier quality engineering, particularly in a mechanical or electronics manufacturing environment.
• Strong understanding of supplier quality management systems and standards, with an emphasis on both mechanical and electrical component quality.
• Excellent analytical, problem-solving, and negotiation abilities related to mechanical processes and metalworking techniques.
• Knowledge of supplier audits, corrective actions, and continuous improvement processes, especially for mechanical components and processes.
• Six Sigma certification or similar qualification is advantageous.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630