Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

1. Assist corporate clients in the establishing, implementation and maintenance of management system in accordance with various international and local standards such as ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, ISO 22000:2018, FSSC 22000, bizSAFE certifications,etc.
2. Provide professional advice and guidance to organization seeking consultation services.
3. Plan and execute project in accordance with client’s requirements
4. Able to work independently as will be working from home.
5. Conduct consultation at client premises.
6. Conducting internal audits and preparation of audit report
7. Any other duties as required by the Compan

Job Requirements:

1. Diploma or Degree in food science or food technology or safety and health related.
2. Minimum 1 years of working experiences in QEHS. Preferred those with experienced on QEHS / food safety consultancy and Quality, Environmental, Safety & Health experience.
3. Able to work independently and meet to each project timeline and deadline.
4. Candidate should be self-motivated and hardworking.
5. Candidate should be able to communicate effectively and interact with corporate clients.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

As a Specialist you will be responsible for support and administration (system back-up, user access administration) for LIMS, MODA and other related Laboratory computerized systems. This role also requires to process the LIMS and MODA static data requests

Responsibilities

• Support and administration (system back-up, user access administration) for Sample Manager LIMS, MODA LIMS, iLAB, and other related Laboratory computerized systems
• Maintenance of LIMS static data (Sample Manager LIMS, MODA LIMS and STATISTICA systems)
• Support for installation and qualification/ validation of software related aspects of computerized instrumentation
• Actively contributes to operational efficiency/continuous improvement initiatives.
• Support system audit trail review all related Laboratory computerized systems
• Maintenance of software related changes to computerized instruments
• Server and database maintenance and administration as relates to laboratory systems
• Provide training for the roll-out of new computerized systems.
• Generation and execution of computer validation documentation (protocols and reports)
• Can identify computer related issues; troubleshoot, identify and complete or coordinate deviation, change control and/ or corrective action records.
• System/ equipment manufacturer and or vendor interaction as required in order to trouble shoot system issues.
• Available to troubleshoot and resolve critical system issues as they occur.
• Experience manages projects (people/ team environment) to meet the timelines.
• Customer and regulatory agency interaction as required.
• Oversight of computer system policies and procedure in order to ensure policy is aligned with current regulatory expectations.
• Familiarity with 21 CFR Part 11 and EU Annex 11 requirements, data integrity requirements and expectations as well as common industry practice with respect to laboratory computerized system management and administration.
• SME in 1 or more areas as aligned with training plan.

Experience

• Degree/Diploma in relevant Science field or Equivalent
• Minimum 5 years of experience
• Relevant work experience preferably Lab related IT experience in a biotech or medically related field.
• Experience in lab computer systems essential (prefer experience with LIMS, and CDS –Chromatography Data Systems

​

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

R63209

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Sobono Group Profile

Sobono Group is a leading energy solutions provider in the Asia Pacific region, committed to sustainability and innovation. We are developing the RExus Waste Wood to Energy (WWtE) Plant and, in parallel, other renewable energy plants regionally.

Job Position – Electrical & Instrumentation Control (E&IC) Engineer

The Electrical Engineer will play a critical and challenging role in the design, engineering, and construction of the electrical systems for the RExus WWtE Plant. This position will be responsible for overseeing all electrical engineering aspects of the project, ensuring compliance with industry standards and project specifications.

Key Responsibilities:

· Develop, execute, and manage capex projects according to company guidelines, meeting operational, technical, commercial, and HSEQ standards.

· Develop and review electrical design drawings, schematics, and specifications.

· Coordinate with other engineering disciplines (mechanical, civil, instrumentation, and control) to ensure seamless integration of electrical systems.

• Prepare detailed electrical equipment and system specifications.

· Interpret and implement project technical specifications, attend meetings for technical clarifications, and facilitate identifying and mitigating engineering risks.

· Review and approve vendor documentation, including equipment data sheets and technical specifications.

• Oversee the procurement and installation of electrical equipment.
• Perform site inspections and commissioning activities.
• Ensure compliance with relevant electrical codes, standards, and regulations.
• Troubleshoot electrical issues and implement corrective actions.
• Prepare technical reports and documentation.
• Coordinate with the project team to ensure timely completion of electrical work.

Qualifications:

• Bachelor's degree in Electrical Engineering or related field.
• Minimum of 3 years of experience in electrical engineering, preferably in the power plant or industrial sector.
• Strong knowledge of electrical design principles, standards, and regulations.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, ETAP).
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.

Preferred Qualifications:

• Knowledge of power plant control systems and automation.
• Experience in project management.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

·Able to work on PH ,Night shif and Weekend

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753

Job Responsibilities

1. System Design and Development

• Design motion control systems, including hardware and software components.
• Develop and test control algorithms for precision motion systems.
• Create detailed design specifications and documentation.

2. Component Selection and Integration

• Select appropriate sensors, actuators, motors, and controllers for the motion control system.
• Integrate components to ensure seamless operation and optimal performance.
• Work with suppliers and vendors to source high-quality components.

3. Simulation and Testing

• Conduct simulations to predict system behavior and validate design choices.
• Develop and implement testing protocols to evaluate system performance.
• Troubleshoot and resolve issues identified during testing.

4. Collaboration and Communication

• Work closely with cross-functional teams, including mechanical, electrical, and software engineers.
• Communicate design concepts and progress to stakeholders.
• Collaborate with manufacturing teams to ensure designs are feasible and cost-effective.

5. Optimization and Improvement

• Continuously improve motion control systems for better efficiency, accuracy, and reliability.
• Stay updated with the latest advancements in motion control technology.
• Implement feedback from field tests and customer use to refine system designs.

6. Project Management

• Manage project timelines, budgets, and resources.
• Ensure projects meet deadlines and quality standards.
• Coordinate with project managers and other engineers to align with project goals.

Required Skills and Qualifications

1. Technical Skills

• Proficiency in motion control technologies and principles.
• Experience with CAD software for designing mechanical and electrical components.
• Knowledge of programming languages (e.g., C/C++, MATLAB, Python) for developing control algorithms.
• Familiarity with PLCs (Programmable Logic Controllers) and HMI (Human-Machine Interface) systems.

2. Analytical and Problem-Solving Skills

• Strong analytical skills to assess system performance and identify areas for improvement.
• Ability to troubleshoot complex motion control issues.

3. Education and Experience

• Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, Robotics, or a related field.
• Relevant experience in designing and implementing motion control systems.

4. Soft Skills

• Excellent communication and teamwork skills.
• Strong organizational and project management abilities.
• Attention to detail and a commitment to producing high-quality work.

Additional Responsibilities

• Compliance and Safety

• Ensure all designs comply with industry standards and safety regulations.
• Conduct risk assessments and implement safety measures in system designs.

• Innovation and Research

• Engage in research and development to explore new motion control technologies.
• Innovate and propose new solutions to enhance system performance and capabilities.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

This is an exciting position who is responsible for QA oversight of Aseptic Processing Program, Environmental Monitoring and Microbial Control Policies for the Cell and Gene Therapy entity. Role will provide oversight and sterility assurance expertise to Operations to assure aseptic processing meets US and international aseptic processing requirements ( FDA Sterile Product Aseptic Processing Guidance and Eudralex, Annex 1,” Sterile Medicinal Drug Products”, ISO 13408 and 21CFR820).

The role will also provide strategic plan and expertise for the development and implementation of the Microbial Control Strategy. Develop, document and manage microbial control strategy for production processes from incoming raw materials through final product release.

Key responsibilities:

• Provide support and expertise to ensure that Cell and Gene Therapy (CGT) and Media preparation operations and support functions for Cleanroom management, Materials Management, Aseptic practices, Environmental monitoring (EM). Sterilisation methods, and Aseptic process simulations (APS) to confidently deliver CT products to patients with the highest quality sterility assurance level.
• Review policies and procedures and related completed media fill/APS documentation, Environmental Monitoring sample plans, cleanroom qualifications, environmental monitoring excursions, deviations and sterility failures.
• Provide Sterility assurance expertise to support APS/EM deviations and investigations, CAPAs and Complaints related to aseptic processing.
• Review of sterile filter validations, integrity testing and procedures.
• Provide expert support and assessment to business partners including production, MSAT, Engineering, QC and QA assuring adequate facilities contamination prevention practices, monitoring tools are provided to production to guarantee the best EM indicator levels.
• Involvement in global harmonization/ efficiency projects; begin to lead aspects of global projects within specific areas.
• Represent site in global forums from sterility assurance perspective. Collaborate with stakeholders of different functions to lead/implement various global/site projects to support sterility assurance.
• Support regulatory and client audits as Aseptic sterility assurance subject matter expert
• Responsible for the generation of key performance indicators, GEMBA walks, regulatory compliance and efficiency targets.
• Communicate quality operations and compliance perspective effectively to senior management.
• Understand and articulate company business strategy. Maintains a broad view of the business recognizes changes and trends in the appropriate area in which the individual operates.

Key requirements:

• Engineering/ Life Science Diploma/Degree or higher from recognized institution with significant years of QA or QC Sterile processing and Microbial experience in similar capacity.
• GMP experience in the biologics industry is required.
• Working knowledge of microbiological and sterility testing, media fills, environmental monitoring , clean room qualification and management, quality control endotoxin testing and microbiological control strategy required.
• Experience with oversight of aseptic processing and the associated international aseptic processing regulations are required.
• Experience in cell culture, cell or gene therapy experience is a plus.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

R63423

Quality Inspector (Jurong East)

working hours: 5 days - 8am - 5.30pm + evening/ weekend OT

base salary + OT pay + 1 month AWS + company shuttle bus (no VB)

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

Roles & Responsibilities

Qualification

• Diploma or Degree in related Engineering studies
• Work Experience of 5years minimum in related field
• Work Experience of 12years minimum if degree is non related.

Job Description

• To liaise with customers on quality issues / requirements for new / existing parts.
• To specify, implement and review appropriate inspection method / equipment / tool to meet customers' quality requirements.
• To analyze and implement appropriate corrective actions to resolve quality issues.
• To evaluate and determine the appropriate acceptable quality limit and plan for inspections.
• To liase with customers
• To trial and improve inspection method or program for complex or complicated inspection.
• To evaluate new inspection equipment / tool / software.
• To specify and evaluate packaging method / materials for new / existing parts.
• To guide and provide training to Inspectors/Technicians in performing inspection as per inspection plan

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

The School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With more than 130 faculty members and an enrolment of more than 4,000, of which close to 1,000 are graduate students, it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

We are looking for a Research Fellow/Research Associate who will be responsible to lead the effort to translate high-level audio algorithms implemented in other audio prototyping software into a high-performance, architecture-specific code and will work closely with other researchers to design and implement DSP algorithms that meet system-level constraints. The Research Fellow/Research Associate will also be defining and implementing software architecture for real-time audio systems on prototype hardware containing a multitude of co-processors.

Key Responsibilities:

• Writing, debugging, optimizing and testing of source code with an emphasis on audio applications
• Maintenance and improvement of existing audio algorithm code base including noise reduction, acoustic echo cancellation, automatic gain control, voice activity detection, packet loss compensation and other audio enhancements
• Supporting Research and Feasibility Studies including defining the scope and goals of audio research tasks and completion of detailed reports on results and recommendations for development activities
• Software development of new algorithmic audio processing solutions including the existing areas mentioned above and additionally including state of the art audio codecs, audibility and intelligibility enhancements, microphone array processing, noise control, 3D audio and other audio effects and enhancements
• Project management tasks including creation and maintenance of requirements and schedule documentation for assigned projects, project budget etc.
• Publish journal and conference papers as dictated by the assigned projects.
• Provide guidance of PhD/Master/undergrad students.

Job Requirements:

• PhD/Masters in Electrical and Electronic Engineering/Computer Engineering field
• More than 1-2 years research experience in related area
• Strong audio signal processing fundamentals (for example, Fourier analysis, transfer functions, filtering, linear algebra, matrix algebra etc)
• Perform independent research and development of emerging and future audio technologies
• Experience conducting acoustic measurements using standard acoustic equipment (speakers, microphones, anechoic chambers, acoustic mannequins)
• Ability to communicate findings and ideas to other teams and to management using both written documents and Keynote presentations
• Ability to effectively contribute in a fast-paced, cross-functional environment
• Preferred experience with spatial audio and HRTFs, acoustic room modeling, collecting, organizing and analyzing large data sets.
• Experience with speaker or microphone arrays, or machine learning is a huge plus
• Proficiency in basics of programming languages such as C, C++ and Python
• Excellent communication skills. (Both written and verbal)

We regret that only shortlisted candidates will be notified.

Control and instrumentation (C&I) engineers are responsible for designing, developing, installing, managing and maintaining equipment which is used to monitor and control engineering systems, machinery and processes

Your job is to make sure that these systems and processes operate effectively, efficiently and safely.

You might work for companies who manufacture and supply the equipment or for the companies who use it, such as nuclear and renewable energy companies and environmental agencies.

You will need a thorough understanding of the operational processes of an organisation as your role is multidisciplinary, working closely with colleagues across several functions, including operations, purchasing and design.

Responsibilities

You'll need to develop skills in specific control disciplines, such as:

• advanced process control (APC)
• distributed control systems (DCS)
• programmable logic controllers (PLC)
• supervisory control and data acquisition (SCADA).

The use of these disciplines will depend on your job. In general however, tasks and responsibilities can include:

• designing and developing new control systems
• testing, maintaining and modifying existing systems
• analysing data and presenting findings in written reports
• managing operations
• working collaboratively with design engineers, operation engineers, purchasers and other internal staff
• project management within cost and time constrained environments
• providing advice and consultancy support
• purchasing equipment
• developing new business proposals.

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Job Description

• Carry out pest inspections, pest management services and treatments at various locations and properties
• Submit service report promptly
• Other ad-hoc duties as assigned

Requirements:

• Candidate must possess Vector Control Technician Certificate by NEA
• No experience needed as training will be provided

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus : Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators;Involve in Quality Walks during site quality surveillance when required Assist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination: Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving: Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actionsReview, comment and approve Subcontractor / Supplier documents based on Company and Project requirements.
• Collaborative Coordination: Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specificationsAssist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.
• Analytical Skills and Problem Solving : Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Involve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role.,Min of 2 FPSO/FSO Projects Completion.
• Skills: Proven track record with strong coordination skills ,Excellent planning and organizing skills. ,Excellent communicator ,Excellent collaborator with cross-functional teams ,In-depth knowledge of quality management system (ISO 9002, API Q1/Q2).
• Education : Relevant Engineering or related Technical Degree.

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus:Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators Involve in Quality Walks during site quality surveillance when requiredAssist to manage the project lessons learned and initiate improvements and ensure experience transfer.
• Collaborative Coordination : Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements:

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role ,Min of 2 FPSO/FSO Projects Completion.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicatorExcellent collaborator with cross-functional teamsIn-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.Review, comment and approve Subcontractor / Supplier documents based on Company and Project requirementsAssist in setup and coordination of Classification Society (CS) and Regulatory Compliance (RC) management framework together with CS and RC coordinators.
• Collaborative Coordination Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed PhaseAssist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.Assist to attend Pre-Inspection Meetings with Supplier Quality Engineers/Vendor Inspection Coordinators and Package Manager/Engineer on critical equipment and packages.
• Analytical Skills and Problem Solving:Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience: Min10 years of QAQC experience with at least 3 years in a leadership/supervisory.
• Skills: Proven track record with strong coordination skills.Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2)

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.
• Collaborative Coordination : Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed Phase Assist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.
• Analytical Skills and Problem Solving : Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role. Min of 2 FPSO/FSO Projects Completion.
• Skills : Proven track record with strong coordination skills. Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2).