Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment. ERI@N has multiple Interdisciplinary Research Programmes which focus on translational Research, Development & Deployment which focus on specific area of the energy value chain, and a number of Living labs and Testbeds which facilitate large scale technology deployment enabling validation and demonstration of real-world applications.

For more details, please view https://www.ntu.edu.sg/erian

To support the research project titled:

• Technology Development of Thermal Management, Lifetime Assessment and Prognostics for Li-ion Battery Energy Storage System in Next-Generation Grid
• Design and Development of Compact Energy Storage System
• Design and Development of ESS coupled with solid state transformers

This job position is required for recruiting a highly educated and experienced researcher with experience to develop battery management system for lithium-ion battery packs in energy storage system application. It will also fulfil the objective of NTU in developing energy storage system and novel renewable energy technologies.

Key Responsibilities:

• Develop overall battery management scheme according to system performance requirement
• Design and develop software of battery management system
• Design and develop hardware and PCB layout of battery management system
• Design and develop state estimation algorithm of battery management system
• Design and develop balancing control strategy of battery management system
• Conduct simulation test and debug of developed software of battery management system
• Conduct simulation test, layout design, PCB design, manufacturing, and testing
• Conduct simulation test of the designed algorithm, balancing strategy.
• Responsible to prepare design progress document and final project report

Job Requirements:

• Masters degree in electronics, control, electrical, or similar
• Research or working background in lithium-ion battery product development and production is a must.
• Experience in technology development for lithium-ion battery management system is required.
• Candidate must be familiar with design requirements on control, state estimation, balancing of battery packs
• Familiar with software like Matlab/Simulink, Keil, CodeWarrior, Altium Designer.
• Understand development progress of battery management system product
• Self-motivated and takes initiative
• Independent and can work well with a team
• Organized and detail oriented
• Excellent verbal and written communication skills

We regret to inform that only shortlisted candidates will be notified.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To be responsible for managing the interactions with third party organisations that supply QA incoming materials and/or services to GSK.
• To manage material release for incoming materials, supplier change notifications and new material management.
• To provide Quality oversight to logistics management and warehouse operations.

Key Responsibilities:

Supplier Management

• Provide QA oversight of Supplier management activities on site to achieve compliance with company policies and government regulations as assigned.
• To participate (Executive 1) and to represent the site (Executive 2) for Supplier Management business processes to drive improvements and share best practises across the GSK Vaccines network.
• Process owner/support supplier complaint process for QA incoming materials. Lodge supplier complaints and ensure suppliers identify the root cause and associated CAPA's to prevent recurrence of supplier quality issues.
• Review and track supplier-related CAPA for timely closure.
• Maintain inspection readiness, conduct supplier assessments for both new and current service providers in a timely manner.
• Maintain the approved supplier listing and audit schedule in a state of compliance and accuracy.
• Assess supplier change notifications in a timely manner and escalate where necessary especially in situations with supply impact.
• Initiate and review deviations/change control/CAPA associated with incoming material.

Executive 1: Minor deviations and CAPA

Executive 2: Minor, major deviations and CAPA

• Work closely with site user and Global stakeholders for Supplier management related matters

QA Raw Material Release and Warehouse oversight

• Support incoming material documentation review and release to recommend and confirm Usage Decision (UD) of raw material
• Ensure that material document file (MDF) is complete and accurate before disposition of material in SAP
• Ensure that system is in place for filing and archival of MDF
• Initiate and review deviations/change control/CAPA associated with incoming material releases.
• Ensure that all deviations/change controls are closed or assessed for impact on the release of the material prior to release the QA-controlled incoming material
• Provide QA oversight to warehouse such as attending warehouse tier, conduction GEMBAs, inspection readiness and warehouse related deviations, CAPAs and change control

Decision Making:

Proposals & Recommendations

• Propose improvements to work processes, with basic awareness of business requirements.
• Deviation investigations and assessments
• In addition for QA Executive 2:
• Able to provide QA oversight on routine situations independently and complex situations with supervision (deviations, changes, system issues, compliance matters)
• Able to manage simple department projects (e.g. continuous improvement) with supervision
• Greater awareness of business requirements and to highlight considerations where there is a need for escalation

Skills:

Professional

• At least University basic degree in a Science or Engineering discipline

Technical

• A good understanding of cGMP regulatory and legal requirements as applied to quality assurance of pharmaceuticals manufacturing
• User experiance with SAP will be prefered
• Ability in handling and organizing multiple workflows

Business

• Ability to apply optimal quality assurance standards to promote a business edge
• Ability to facilitate business activities commpatible to international regulatory environment
• Ability to communicate effectively within the site organization and across the network

Competencies:

• Working knowledge of FDA/EU/ICH/WHO as well as all other relevant reuglatory and technical guidelines
• Possess Analytical and Quality performance mindset
• Demonstrate professional & ethical integrity
• Fluency in the English language
• Demonstrates sense of urgency
• Ability to work both as an individual contributor and as a team player.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Job description

Non-Destructive Testing (NDT) technicians examine structures,vehicles, and products for flaws and structural weaknesses usingnon-destructive testing techniques. They conduct material tests,interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering,or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound,infrared, and radiographic.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage logistic activities within QC department

Key Responsibilities:

• Performs receipt and storage of sample in accordance to local procedure.
• Performs routine and non-routine sampling of raw materials and utilities with observation of GMP requirements
• Ensures proper packaging of samples and correct samples are shipped to offsite recipient timely
• Ensures a good inventory of QC materials (purchased and prepared materials/glassware) to support testings; ensures no over surplus of inventory
• Ensures wastes are disposed appropriately and promptly.
• Practices 6S and ensures good housekeeping of laboratory, work area and equipments.
• Supports equipment calibration and maintenance, performs autoclave requalification and washing machine verification
• Performs peer review for verification of task and data.
• Participates in laboratory investigation (when required) and assist in the timely closure investigations, CAPAs.
• Ensures proper archival of submitted document for easy retrieval
• Identifies and reports problems in QC to supervisor in a timely manner.
• Adheres to all safety and security policies and practises
• Manages ad-hoc support tasks
• Assist QC support manager in the management and operations of the team
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely sample and material management Provides training to the team
• Provide guidance, support, and technical expertise to the team Involves in investigation and protocol and report writing (when required).
• Involves in SOP writing and updating.
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget

Skills:

Professional

• For QC Support Technologist - Fresh graduate of NITEC, Diploma in Science (or equivalent)
• For Senior QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 4 years of experience/Degree holder with at least 2 years of working experience.
• For Lead QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 8 years of experience/Degree holder with at least 4 years of working experience.

Technical

• Competent technical skills in good laboratory knowledge and hands on experience in inventory management
• Knowledge of cGLP & cGMP

Business

• For QC Support Technologist, Senior QC Support Technologist 1, 2
• Basic report writing skills (preferably with legible hanwriting)
• Basic planning and organizing skills (for individual time management and work planning) Good interpersonal skills
• Team player
• For Senior QC Support Technologist 3 and Lead
• Effective report writing skills
• Planning and organizing skills (for individual time management and work planning)
• Leadership and problem solving with analytical and logical thinking

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking

​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

Job Description & Requirements

Able to operate CNC CMM machine with 2 years experience needed is a priority.

Knowledge in QC equipments, example: Height Gauge, Smart Scope, Veriner caliper etc.

With computor knowledge to provide QC report and handle NCR.

Must have knowledge in drawing specification. Example: Tolerance, Surface Treat, Heat Treat etc.

Basic knowledge in machining process.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.

Job Description

1. Supervise a team of QC Officers in all factories.
2. Guide and troubleshoot for any equipment issues, co-ordinate with external service providers Ensure laboratory equipment is calibrated in a timely manner and update calibration records. Assist to keep, control, and confirm formulation and blending procedures.
3. Respond to new and existing customers for inquiries related to quality control Conduct quality testing and communicate product specification issues. Conduct nonconforming material or nonconforming product analysis.
4. Participate in the root cause analysis of nonconforming goods.
5. Follow the instructed corrective actions and preventive actions by superiors. Establish formulation and blending procedures as needed.
6. Keep and monitor retain samples of products
7. Validate COA of raw materials received and communicate any issues to the procurement and Plant Manager Establish, update and issue GHS SDS.
8. Create certificate of analysis (COA) of products.
9. Confirm and provide resources for the laboratory and other QCR needs.
10. Coordinate sample delivery as required by the customer.

Job Requirements

• Min. Degree in Chemistry related field or
• Diploma in Chemistry with minimm 5 years of relevant experience
• Technical Knowledge : Microsoft Officer (Basic) / Good knowledge & skills on QC testing
• Ability to coach and mentor the team

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Hiap Tong Crane & Transport is hiring Credit Control cum Administrative Assistant.

Job scope:

- In charge in calling & liaise with customers to follow up on outstanding payment

- Prepare monthly Statement of Accounts & payment reminder to customers

- Maintaining accurate records of customers' payment history and debt recovery efforts

- Assist in Generating and Sending invoices to customers

- Office administrative & clerical works

- Any other ad-hoc tasks as assigned

Requirement:

- Competent in Microsoft office application

- Possess good working attitude & sense of responsibility

- Excellent communication and negotiation skills

- Strong understanding of credit risk assessment and collections processes

- Detail-oriented, organized, and capable of meeting deadlines.

- Ability to work independently and as part of a team

- At least 01 year of proven experience as a Credit Controller or similar role in finance/accounting

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software

We are looking for a Quality Control Assistant to support the Quality Assurance Executive in maintaining the highest standard of product quality and safety.

Job Description:

• Responsible for FSMS (GMP, HACCP, ISO 22000, HALAL) monitoring
• Consistent monitoring of quality and specification of product during processing
• Perform inspection for incoming material and outgoing finished product
• Recording and maintaining data for QC information
• Collect samples for product testing
• Report to the department lead on nonconforming products or processes detected

Requirement:

• Physically fit to work in cold room environments with the ability to stand and walk for extended periods.
• WSQ Food Safety Course Level 1 and/or Level 3 certification preferred, familiarity with food/seafood handling and processing is a plus.
• Meticulous with strong organizational and communication skills.
• Strong communication, organizational skills, and ability to walk and stand in a fast-paced cold working environment.
• Proficient in English and Mandarin to interact with Mandarin/English-speaking stakeholders.
• Willing to take up ad-hoc duties assigned by the company.
• Knowledge of SAP will be advantageous.

Job Highlights

• Job Types: Permanent/Contract
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, alternate Sat
• Great learning development opportunities.
• Work-life balance and positive/friendly working environment.

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

Responsibilities

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and report on project status
• Prepare project budget and cost estimation
• Co-ordination of hookup and monitor of tools installations schedule
• Manage, control and monitor all project activities such as design, testing and commissioning of project

Competency Requirements

• Diploma or Degree in Electrical/Mechatronic/Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Job Description

• REs shall provide standing supervision of all civil and structural works to ensure compliance with the following authorities' requirements:
• The inspection of the bus depot involves the demolition and removal of the existing Pasir Panjang Distripark. Following this, the construction will take place for main depot building, dormitory and administration office.
• Knowledge of construction methods, materials, and safety protocols
• Supervise and monitoring of contractors’ work to ensure they are carried out in accordance with the provision in the contract document.
• To monitor the progress and assist SRE/QP on structural inspection on all Structural works according to the approved drawings issued.
• To review and supervise safety, environmental and health matters.
• Review and comment on contractor's submissions.

Job Requirements

• The RE shall have minimum three (4) years of experience as a civil engineer; and have least two (2) years shall be in supervision of works similar in nature to the Works in the Civil Contract.
• All RE shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.

Work During Office hour

Monday to Friday: 8:30 a.m. to 5:30 p.m.

Saturday: 8:30 a.m. to 12:30 p.m. (Willing to work on rotation shifts)

Sunday and Public Holiday: 00:00 hours onwards or otherwise advised by project officer depending on LTA’s contractor work schedule.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage