The School of Electrical and Electronic Engineering (NTU EEE) invites applications for the position of Research Engineer I.

The Research Engineer will be responsible to lead the effort to translate high-level audio algorithms implemented in other audio prototyping software into a high-performance, architecture-specific code. Work closely with other researchers to design and implement DSP algorithms that meet system-level constraints. The Research Engineer will also be defining and implementing software architecture for real-time audio systems on prototype hardware containing a multitude of co-processors and carrying out the experiments.

Key Responsibilities:

• Perform independent research and development of emerging and future audio technologies

Job Requirements:

• Bachelor in Electrical/Computer Engineering with emphasis in audio and acoustics signal processing
• Have performed final year project related to active noise control
• Have written a report or paper on active noise control
• Good audio signal processing fundamentals (for example, Fourier analysis, transfer functions, filtering, linear algebra, matrix algebra etc)
• Experience conducting acoustic measurements using standard acoustic equipment (speakers, microphones, anechoic chambers, acoustic mannequins)
• Ability to communicate findings and ideas to other teams and to management using both written documents
• Experience with speaker or microphone arrays, or machine learning is a huge plus

We regret that only shortlisted candidates will be notified.

• Reports to the Safety Manager
• Liaise closely with authorities
• Familiar with local law and regulations
• Take charge and handle public feedback
• In charge of all environmental control programs and lead the environmental team
• Maintain proper documentation i.e. Site environmental Report, daily environmental inspection report etc.
• Conducting environmental workshops and training for the project
• In charge of pre-project planning and advice on the measures to take in areas on noise/water/air pollution control, waste/pest infestation control, and public/neighbors’ engagement and management

Job Requirements:

• A Registered ECO with NEA
• A Registered ECMO with IES
• Attained Specialist Diploma in WSH or equivalent
• Minimum 3 years’ post-registration experience as ECO for LTA projects
• Experience in civil works (road and viaduct) & ASAC awards preferred
• Proficient in GGBS requirements/implementation and ISO14001:2015 standards
• Proficient with MS Office
• Location: Woodlands
• Project: Infrastructure, Viaducts

Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality QAQC Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead Quality Assurance and Quality Control personnel.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001 and API Q1
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Job Responsibilities:

• Develop & implement QMS system & take the lead of continuous improvement process & initiatives
• Provide root cause analysis & preventive action plans to resolve non-compliance issues
• Analyze internal & external data to identify areas for improvement & communicate with relevant parties for quality improvements
• Ensure the compliance with ISO 9001 & all relevant standards to both internal company policies & customer standards

Requirements:

• Diploma in Mechatronic, Electronic Engineering or equivalent or
• 3 years Quality experience in Service/Maintenance/Repair industry
• Possess good knowledge of ISO 9001, QA methodologies & tools
• Good communication & interpersonal skills

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Industry: Semicon Manufacturing

Salary: $3000-$4500

Job Description

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Issue and closure of CAR for customer (RMA) and Supplier issue – External
• RMA receipt and disposition of RMA in Macola – External.
• Work with QA department and Engineering on customer related issues e.g. RMA

Requirements:

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc).
• Knowledge of CMM, profile projector, and measuring equipments.

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Basic Functions:

• Assist in maintaining company’s compliance to quality management system established.
• Responsible in monitoring the calibration and maintenance program.
• Ensure that ISO 13485, In-vitro Diagnostics Directive 98/79/EC, IVDR 2017/746 and 21 CFR Part 820 Quality System Requirement, MDSAP (Medical device Single Audit Program) are properly implemented and maintained at all levels.
• Establish and maintain proper document archiving and control system.

Duties:

• Assist in maintaining company’s compliance to quality management system established.
• Assists in internal and external audits.
• Responsible in handling the corrective and preventive action system and its sub-system (i.e. Nonconforming product and internal audit).
• Ensure that proper document control procedure and system is implemented for Product Specifications, Operation Manuals, Standards, Drawings and all quality related documents.
• Control and compile Production / QC Master Batch Records and ensure that the Quality Records Master List is updated. Together with the Documentation Center, ensure that all documents submitted and/or generated are archived.
• Co-ordinate, review, collate, update and issue all quality-related documents to relevant personnel.
• Prepare necessary documentation (e.g. Certificate of Analysis and Certificates of Origin) to support shipment of products overseas.
• Control and compile Production / QC Master Batch Records and ensure that the Quality Records Master List is updated. Ensure that all documents submitted and/or generated are archived.
• Receive Production / QC Records and all quality related documents and ensure that proper document archiving and control system is implemented.
• Ensure that all documents submitted and/or generated are archived.
• Compile and ensure that the Quality Records Master List is updated.
• Perform other duties as assigned.
• Support the projects of material qualification
• Any other duties as and when assigned.

Minimum qualification Requirements

Ability to:

• Demonstrate the use of all equipment, materials, and techniques relevant to job performance, execute and maintain pertinent validation protocols as required and maintain quality standards.
• Establish quality assurance system and undertake systems / product / process validation

Knowledge of: Various quality control/process control requirements, quality management system and documentation relating to biomedical and /or IVD products. Technical terminology used in the laboratory, assigned scientific techniques and knowledge of QC procedures governing a number or basic laboratory operations.

Education: Basic Science Degree

Experience: No prior working experience is required for Executive position. At least 3 years of relevant working experience for Senior Executive position.

Job Responsibilities

• Assist with the implementation and maintenance of the Quality Management System in accordance with ISO 9001 and 13485 standards, and in compliance with the H.S.A GDP Guidelines.
• Provide support for investigation into non-conformances and customer complaints.
• Maintenance and Follow-up on Corrective Actions and Preventive Actions (CAPAs).
• Provide the trainings and coordinate the trainings for the staff.
• Registration of the trainings into the electronic Quality Management System (eQMS) and running of reports.
• Assist with the documentation review after an operational activity.
• Collection of Temperature Data and Monitoring of the temperature environmental conditions.
• Reporting of day-to-day activities.
• Take care of and communicate with internal and external contacts.
• Control administrational aspects of the facility (e.g. archiving).
• Promote a “quality” culture within the company.
• Performing physical checks for GMP and GDP related processes

Job Requirements

• Possess at least a Diploma in Pharmacy, Life Sciences or relevant fields.
• Possess at least 2 years of pharmaceutical science work experience (or prior Life Science internship experience) is preferable .
• Experience with ISO 13485 standards is an advantage.
• Knowledge of GMP and/ or GDP guidelines is an advantage.
• Able to work in a fast-paced environment
• Work well independently/with minimal supervision and with others in a team
• Proficient in Microsoft Office especially Excel
• Candidate needs to be based in Singapore.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities

• Responsible for the organization, administration, training, development, and supervision of personnel under QA Documentation and Training Area. The incumbent hires, trains, develops, evaluates performance, and administers following established personnel policies and procedures.
• Maintains an organizational structure capable of meeting both the immediate and long term objectives of the Quality areas under his/her responsibility. 
• Prepares annual/update budgets for the sub department.  Responsible for developing, implementing and maintaining the effectiveness of the quality system (Quality Documentation, Training and Supplier Quality departments).
• Owner of the Management Review process and related metrics tracking and trending. (Quality Documentation, Training and Supplier Quality departments)
• Ensure compliance with applicable AbbVie policies, processes and procedures, contributing to the development of strategies and oversight of complex programs.
• Drive implementation of policies and procedures to maintain compliance to global regulatory requirements for policies, processes, and procedures.
• Manage broad and cross-functional quality programs, initiatives and organizational change related to the AbbVie quality system.
• Lead goals with cross-functional/cross-divisional/global scope.
• Ability to expedite and resolve issues. Elevate issues as appropriate.
• Responsible for Training Section and for the establishment, administration, and maintenance of a CGMP training program.
• Responsible for Documentation Section and for administration and maintenance of documentation control quality programs such as: Document Change Control, Document Retention, and Batch Record Archive, among others. 
• Responsible for Supplier Quality Section and for the establishment, administration, and maintenance of a supplier quality programs such as CAPA system oversight, Supplier Quality Management and Supplier Qualification. 
• Operates within the constraints of limited human and financial resources and changing priorities.  Liaison with other AbbVie Sites and 3rd Parties. 
• Participate fully and/or chair relevant Project team meetings. 
• Actively supports functional work centers within Quality and Site to achieve goals. – QC, Engineering, Quality Systems and Operations.
• Assists Quality Director with assigned tasks including budgetary control and key meeting preparations.

Requirements

• Degree or Higher in Science or Engineering discipline. 
• Quality or Regulatory Qualification an advantage but not essential. 
• A minimum of 5 years’ experience in a Quality or Project/ Program Leadership role in pharmaceutical, biopharmaceutical experience in Quality and/or Compliance (GxP) environment 
• Strong communication skills, written and oral.
• Excellent knowledge of pharmaceutical regulatory requirements (GMP) is essential. 
• Previous Leadership experience essential, 2 years min in either Project leadership or people leadership roles.
• Demonstrated change agent and innovative person. 
• PMP software skills an advantage. – MS Project, Mind Manager etc.
• Requires knowledge of quality/compliance management as well as regulations and standards affecting APIs and Biologics
• Experience in managing diverse teams is preferred.
• Expected to demonstrate high levels of integrity and a strong work ethic at all times and ability to supervise a team including supervisors, contractors and trainees
• Strong problem solving skills and highly independent
• Self driven and meticulous individual

Sunningdale Tech Ltd is a leading manufacturer of precision plastic components. The Group provides one-stop, turnkey plastic solutions, with capabilities ranging from product & mould designs, mould fabrication, injection moulding, complementary finishings, through to the precision assembly of complete products.

Boasting a total factory space of more than 4 million sq feet, with more than 1,000 injection moulding machines and a tooling capacity of 2,000 moulds per year, Sunningdale Tech is focusing on serving four key business segments – Automotive/Aerospace, Consumer/IT, Healthcare and Tooling.

With manufacturing facilities across Singapore, Malaysia (Johor, Penang), China (Tianjin, Shanghai, Suzhou, Zhongshan, Guangzhou, and Chuzhou), Latvia (Riga), Mexico (Guadalajara), North America (Phoenix), India (Chennai), Thailand (Rayong), and Indonesia (Batam), Sunningdale Tech is strategically positioned to target and capture opportunities in diverse business sectors globally.

As an industry leader with deep engineering expertise and experience, Sunningdale Tech is driven to solve your challenges by applying our advanced capabilities & leading technology in ways that benefit you. We’re ready to provide solutions at every step of the process to reduce lead time and add value for customers, while maintaining our excellent quality. Beyond that, we build on our strong foundations to think out of the box and apply relevant new possibilities for your complex engineering problems. Customers can trust us to constantly solve challenges to meet their needs, and apply new ideas for better outcomes.

Responsibilities:

• Resolves customer inquiries, quality, and operational issues in a timely manner by consulting with the Business Development HOD, Operation Manager, QA Manager, other supporting managers, Superior
• Manage, lead, and motivate a team of quality inspectors and technicians to meet departmental objectives and goals, create and promote food safety, GDP, GMP & lead by example
• Early involvement in new product and project development to establish internal specification and keep abreast of customer requirements
• Document in STL’s quality system and implement programs to ensure compliance with applicable regulatory requirements and corporate’s quality system requirements
• Develop and continually improve production, inspection and process control activities, corrective & preventive action, hazard analysis and risk management
• Responsible for timely closure of CAPA, non-conformance investigation report, customer complaints and deviations. Escalate to superior if required
• Analyse and trend various Key Performance Indicators per management’s vision and direction, including indicator of interest
• Develop, reviews, and approves qualifications and validation protocols, involvement in food Hazard/Medical device Risk management activities and departmental level risk and opportunity assessment, including JSA
• Ensures effective communication internally & externally
• Ensure department’s personnel competency, develop, and retain skill base knowledge within the organisation, through training needs identification
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma and / or Bachelor Degree in Biomedical Engineering
• Minimum 2 year's experience in QA function, preferably in plastic injection molding company
• Strong knowledge of Quality tools and Quality concept fundamentals
• Ability to perform root cause analysis, process optimization, data analysis and validation effectively manage a high-volume manufacturing setting/environment
• Ability to apply problem solving technique and provide solutions under minimal supervision.
• Good written and oral communication skills
• Training and developing both technical and non-technical employees
• Prior supervisor experience managing several direct reports

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

Only shortlisted candidates will be notified

Sunningdale Tech is an equal opportunity employer – we believe that a diverse and inclusive workforce will cultivate a vibrant, productive and innovative workplace where all employees are truly respected and valued.

All qualified applicants shall be considered for employment regardless of age, race, gender, gender identity, religion, marital status, medical condition, mental or physical disability, national origin, political and/or third party affiliation or veteran status. All offers of employment shall be conditioned upon successful completion of background checks, valid work passes and medical screenings, as applicable and/or mandated by law, and subject to the applicable local laws and regulations.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

The School of Electrical and Electronic Engineering (EEE) invites applications for the position of Research Associate. The RA will work on a research project on the development of vision based robotic manipulation techniques for soft objects based on CNNs.

Key Responsibilities:

• Modelling of soft objects
• Development of robot vision system for detection and localization of soft objects using machine learning
• Development of control methods for manipulation of soft objects

Job Requirements:

• Master Degree in Electrical and Electronic Engineering
• Expertise in machine learning, robotics and control
• Experiences in robotics and machine learning related projects
• Good Publication track record
• Proficiency in basics of programming languages such as C, C++ and Python
• Proficiency in English

We regret that only shortlisted candidates will be notified.

Academic qualifications in engineering or project management with minimum experience of 2 years.

Involve acting as frontline support for the Microsoft Project Enterprise system to all levels of the organization.

The daily activities will include, but not be limited to, assisting users with Project Assignments for weekly timesheets, assisting Project Managers in the constructions and upkeep of Development Project Schedules, providing reports on Project Cost and Status as requested, ensuring MS Project and SAP are kept in sync through manual updates, continuous maintenance of user database for MS Project System.

Experience requested for this position will be a passion for planning and customer service.

Microsoft Office proficiency is a must and experience in scheduling software (MS Project / Oracle Primavera P6) is a plus but not required.

A strong personality and willingness to champion the department policies to all users will be very beneficial.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

· Develop systems design, programming and selection of equipment instrumentation and controls.

• Prepare and review I&C specifications, requirement, drawings, e.g. instrument lists and datasheets/specifications, ICA panels, control valve, process functional description and SLD

· Responsible for Single Line Drawing, Control Schematic drawings, and programming of SCADA/HMI necessary modification of existing programme.

• Participate in the development of P&ID's, package specifications, logic diagrams, cause & effects, control narratives
• Prepare RFQs, technical bid summaries and make purchase recommendations
• Lead and Interface with suppliers, clients, and other engineers on ICA

· Execution of projects.

· Startup, testing, commissioning and troubleshooting of plants

· Preparation and support tender team for tender and proposal activities.

Requirements:

• Degree in Electrical & Electronics / Instrumentation / Automation Engineering.
• Minimum 15 years relevant working experience, preferably with experiences in Instrumentation and Control.
• Knowledge in Instrumentation and Control.
• Knowledge in high end fieldbus communication (eg. profibus, modbus and other high end communication protocol).
• Able to read & understand single line diagram and generate Bill of Materials from single line diagram.
• Knowledge on control, schematics, motor controls and materials take-off.
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.
• Those with relevant project management, process design, and service & maintenance experience will be an added advantage.
• Possess good communication and interpersonal skill.
• Highly motivated, driven by excellence and having an eye for details.
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines/vision.

An attractive remuneration package, benefits, challenging work environment and excellent career growth in the company would be offered to the successful candidate.

Additional Information

Job Responsibilities:

• Ensure all laboratory tests are well managed and performed including testing on raw materials, intermediates and finished products
• Ensure all laboratory instruments and equipment are maintained and calibrated
• Manage the inventory of quality reference materials such as QC reagents and lab consumables
• Prepare daily QC report, relevant work instructions and validation protocol or reports
• Ensure documents and quality records are maintained for easy retrieval
• Manage operations towards timely support to meet factory analytical request
• Develop training to build quality and safety awareness
• To maintain cleanliness of laboratory and glassware
• Handle administration work of factory when required

Job Requirements:

• Min Nitec / Diploma in Chemical Process Technology or its equivalent
• Entry level (preferably 2 years experience in handling wet chemistry and laboratory management)
• Preferably with knowledge / skills on ISO900, ISO 13485 and ISO14001 Quality Management knowledge and current Good clinical/ laboratory/ manufacturing/ pharmaceutical practices (cGXP)
• Strong troubleshooting skills with various analytical instruments
• Good verbal and written communication and interpersonal skills
• Positive working attitude with sense of urgency
• Able to work independently as well as an effective team player
• Self-driven and motivated to improve processes
• Working hours: 8.00am - 4.45pm
• Work location : 19 Jalan Tukang

Job Description & Requirements

• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitoring and verifying that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Assisting the project proponent in ensuring that all environmental authorisations have been obtained.
• Reviewing and approving environmental objectives and targets and assisting the Contractor in finding environmentally responsible solutions to problems.
• Conducting, surveillance, monthly inspections and detailed audits.
• Compiling and completing checklists in order to aid the surveillance and inspection requirements.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommending the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Keeping a register of complaints on site and recording community comments and issues.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.

Job Requirement:

Registered with National Environment Agency (NEA) and have at least three (3) years of post-registration and practical experience relevant to the scope of works of the contract. Local candidates with LTA experiences will be advantage.

Quality Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead Quality Assurance and Quality Control personnel.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001 and API Q1
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• ISO 9001 and API Q1
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.