KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Responsible for inspection of parts and products and ensuring that they comply with the set standards and specifications
• Ensure that all inspection check sheets are duly completed
• Ensure that non-conformance parts and products are not released to the customers
• Ensure that defects are corrected before releasing them to Production
• Ensure that corrective or preventive action are in place and sustained
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job Requirements:

• Minimum NTC2/3, ITC in Mechanical/Mechatronics/Precision Engineering
• At least 1 year of experience in quality control and related work
• At least 1 year of experience in the operation of CNC machines
• Basic knowledge of Microsoft Office tools: Excel, Word, PowerPoint

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Quality Technician, Product Quality is responsible for product release of complete instrument and play key role in ensuring the released instrument is meeting quality and regulatory requirements.

This position reports to the Senior Manager, PQE and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Perform outgoing product release (Device History Records buy-off) and inspection on instruments according to documented procedures.
• Perform part tracking for install and complaint issues. Ensure part is being received so failure analysis can be initiated.
• Support in complaint investigation activities. The job also require work with cross functional team and ensure proper investigation records is generated.

The essential requirements of the job include

• Diploma/ ITE in Engineering or equivalent.
• 2-3 years of relevant working experience in QA is required.
• Knowledge of the following QMS standards - ISO9001 QMS, ISO13485 QMS and FDA 21 CFR Part 820 is strongly

It would be a plus if you also possess previous experience in:

• Experience with working in a manufacturing environment is preferred.
• Experience in performing product release activity for medical equipment’s.

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Element has an opportunity for an experienced Quality Engineer. Reporting to the Principal Quality Manager, you are an essential member of the management team and responsible for the overall quality performance. This includes implementation, maintenance and improvement of Element quality management system (QMS). The successful candidate will have a sound working knowledge of ISO/IEC 17025, ISO/IEC 17020 or ISO/IEC 17065 requirements in relation to testing, calibration inspection and certification.

In this role, you will have interaction with clients, Accreditation Bodies and will be responsible for advising operational colleagues of the importance of quality, accuracy and integrity in the provision of the testing, calibration inspection and certification services we provide.You will be involved in leading quality at a local level and will work closely with the Principal Quality Manager to ensure that Element quality policies, processes and procedures are effectively implemented. As a quality leader within Element you will be capable of driving a culture of quality assurance and quality improvement, working closely with your operational colleagues and the wider Element quality community.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Ensuring all staff buy-in to the effective and efficient implementation of Element quality policies and procedure by providing advice, guidance and support on quality issues to Element Singapore and Malaysia business units.
• Driving quality improvements at every opportunity and proactive participation in continuous improvement and process improvement projects and ensure effective adoption of Element e-QMS throughout Element Singapore and Malaysia business units.
• Proactive participation in projects to deliver identified Quality objectives and contribute to and drive key initiatives to improve Quality awareness and compliance.
• Management of and participation in scheduled internal audits across management system and technical disciplines and proactively monitoring laboratory test equipment for calibration currency and advising management of upcoming schedules,ensuring corrective and preventive actions identified within specific laboratories are implemented and verified in a timely manner.
• Represent Element Singapore and Malaysia business units during assessments by accreditation bodies and audits by clients and controlled document holding and arrange to update appropriate documentation as necessary, control and issue of Element Singapore and Malaysia Quality Management Systems documentation and participate in the internal audit programme to monitor implementation of quality policies and procedures.
• Manage external and internal proficiency testing programs of all Element Singapore and Malaysia business units and prepare compliance and improvement metrics for Element Singapore and Malaysia business units quality as required.
• Writing and reviewing quality documentation as required and effective and efficient management of personal work schedules and timely generation of Element Singapore and Malaysia business units quality reports.

Job Requirements:

• Minimum Bachelor of Science or Engineering qualification.
• Proven experience (minimum two years) of managing quality management systems within a multi-discipline testing, inspection and certification environment, preferably multi-location.
• Demonstrable experience auditing against ISO/IEC 17025, ISO/IEC 17020 and ISO/IEC 17065.
• Sound knowledge of equipment calibration and analysing proficiency test data.
• Knowledgeable in uncertainty of measurement and risk assessment and hands-on experience with Element e-QMS preferable.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job description

Non-Destructive Testing (NDT) technicians examine structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques. They conduct material tests, interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering, or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound, infrared, and radiographic.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• Attend client quality management meetings
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.

• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Supporting Electrical and Automation at Tuas plant.

Responsibilities:

· Responsible for safety personnel and plant.

· Participate directly in site emergency response team.

· Troubleshoot and repair a variety of complex liquid, drying and powder processing, and packaging equipment.

· Back up and maintain PLC, HMI, VSD and other controller program and software version.

· Troubleshoot automation issue by hardware or instrument, program setting/bug and connection issue.

· Knowledge in Alen Bradley PLC, Wonderware SCADA and In Batch system for Troubleshoot automation related in Dry Blending, Filling and Packaging system.

· Evaluation of P&IDs, functional design specification.

· Responsible for performing PM’s and work orders as well as project work.

· Disassembly, diagnosis, repairs and re-assembly of machinery to hygienic and sanitary standards.

· Participate in the development of a Predictive Maintenance program at Tuas.

· Complete all necessary reports and documentation via hardcopy and computer.

· Communicate with Engineering technician on any major process issues as and when required.

· Maintain a clean and sanitary environment in accordance to all safety and GMP policies.

· Be able to use independent judgment and work well within a team concept.

· Interact with internal and external customers in a professional manner.

· Follow all cGMP requirements to ensure proper manufacturing environment.

· Actively participate in the resolution and elimination of downtime issues.

· Assist in the creation of SOP’s, checklist, and work instructions.

· Complete all necessary transactions, reports and documentation with accuracy and timeliness.

· Maintain a clean and sanitary environment to 5S or similar standard.

· Adhere to the Tuas Code of Conduct.

· Provide technical assistance and support regarding all projects, installations, and repairs.

· Maintain smooth communication with different levels of departments and peers.

· Upgrade hardware and software for improved process control.

Requirements:

· Nitec/Higher Nitec/Diploma in Electrical & Electronics / Mechatronics equivalent qualifications.

· At least 3 years of industrial automation & maintenance experience.

· Previous experience in a food or pharma manufacturing environment is preferred with experience and knowledge in Automation and predictive and preventative maintenance technologies.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

KEY DUTIES AND RESPONSIBILITES:

· Perform analysis and tests of drug products, raw materials, in-process materials, release test samples, stability samples, packaging materials, quantitative assays on samples, and/or finished products from manufacturing, to ensure quality standards and compliance with established specifications.

· Preparation of reagents/diluents/ dissolution media as per STP.

· Perform a various qualitative tests or qualitative assays on samples using modern and automated instrumentation.

· Utilize electronic laboratory information systems such as LIMS for acquisition and processing of analytical data.

· Ensure implementation of SOP for all corresponding activities.

· Write controlled documentation related to QC Laboratory operations or testing such as SOP's, analytical protocols, analysis reports and forms.

· Ensure real time documentation, maintain data integrity and appropriate traceability.

· Assist in maintenance and calibration of test instruments per specifications.

· Responsible for the accurate, timely and compliant execution of assigned projects, analytical testing and related documentation.

· Responsible for checking all results in LIMS/RDS and reporting of any observed results that do not meet the requirement (OOS/OOT/Deviation) for further investigation.

· Destruction of expired finished products/ raw material samples as per SOP and recording the same in the register.

· Responsible for QC lab and equipment/instrument cleanliness.

· Responsible for procuring and receipt of QC lab glassware and consumables.

· Any other activities as and when assigned by the Superior.

EDUCATION:

· Degree / Diploma in science related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

· (Specialist) Minimum 4 years of quality control experience in pharmaceutical manufacturing industry.

· (Analyst) Fresh grad/ 1-2 years of quality control experience in pharmaceutical manufacturing industry.

KNOWLEDGE & SKILLS:

· Possess working knowledge of GMP in the pharmaceutical industry.

· A good team player with positive learning attitude.

· Working knowledge of validation, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self discipline.

RESPONSIBIITIES & DUTIES

* To design, write & troubleshoot machine electrical & control systems for factory automation, smart-factory technologies as well as AI platform.

*To design and perform detailed designing for machine electrical control systems for Factory Automation, Smart-Factory Technologies, Machine & Equipment Manufacturing.

*To write Programmable Logic Control (PLC) program for automatic machine control & processes. Preferably, with Industrial PC (IPC) programming experiences too.

* To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new projects proposal and confirmed projects.

*To lead the in-house electrical staff and/or the company’s appointed electrical vendors on the respective machine control and electrical systems and operations of the projects.

*To lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company and/or customer site.

*To spearhead meetings and review with the design team and the customers on control system requirements and specification.

SMART-FACTORY TECHNOLOGIES & SOLUTIONS

*To team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects.

*To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

*To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.

PROGRAMMING SKILLS & REQUIREMENTS

* PLC based system: ladder, functional block, structure text

* PC based system: C++, VB (visual basic)

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Principal Engineer, Supplier Quality is responsible for driving Quality performance of the suppliers to meet Sciex Product Quality requirements through supplier qualification processes, supplier control processes, aligned with supplier management strategies.

This position reports to the Senior Manager Supplier Quality and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Drive improvement of quality performance of suppliers and support NPD/NPI project, ensure resolution of the issues identified in NPI.
• Lead supplier qualification activities for new suppliers with Global Sourcing & Global Supply Chain.
• Plan and execute periodic audits at suppliers' site to ensure suppliers' QMS is meeting ISO standards, IPC standards, FDA QSR (GMP) and compliance to agreed process control plans
• Monitor supplier performance, review periodic quality data/reports/scorecards and related action plans
• Drive resolution of complex material quality issues by deep diving suppliers' root cause analysis and by working with suppliers to monitor corrective action and facilitating with internal support where required.

The essential requirements of the job include:

• Degree in Electrical/Electronics/Mechanical Engineering with of 5-8 years related experience in Supplier Quality Management, Process Engineering is preferred
• In Depth knowledge of PCBA manufacturing processes, familiar with IPC 610 standards
• Demonstrated experience on the performance of audits, lead-auditor certification preferred
• Familiar with problem solving tools such as 5 why root cause analysis, and Quality tools such as DFM, PFMEA, GR&R, Control Plan, SPC.
• Knowledge of ISO 9001, ISO13485 and FDA 21 CFR Part 820 will be added advantage

Travel Requirements:

• Ability to travel – 20-30%, and maybe travel on short notice

It would be a plus if you also possess previous experience in:

• Managing suppliers including supplier evaluation and supplier performance
• Broad knowledge of manufacturing operations and quality system practices in a Medical Device or Pharmaceutical company is preferred

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

Job Descriptions:

• Perform accurate mechanical, physical and visual inspection of components
• Ensure that all parts and components have been tested and measured within specifications/tolerances.
• Initiate Non-Conformance reports as required.
• Communicate with supervisors, mold technicians and other staff to resolve inspection questions.
• Accurately document the results of the inspections and testing on the computer in various programs
• Read and interpret specifications and drawings
• Report any product defects immediately to the technician
• Support the implementation of ISO registration, compliance and audits
• Maintain calibration, first article, internal auditing and training programs
• Direct customer and supplier support for quality matters verification if required

Job Requirements:

• Minimum ITE in engineering or other relevant fields with 3 years of experience
• With relevant Quality Control experience in Plastics Mold preferred
• Practical understanding of precision tooling
• Ability to use basic hand measurement tools (calipers, micrometers, gauge pins, etc.) required
• Experience with visual and touch probe CMMs (Zeiss, Nikon) and Optical comparator desired
• Experience with metrology, GD&T, technical drawing reading
• Fluency in ISO program management and implementation is an asset
• General computer proficiency
• Able to perform Over time
• Able to perform rotating shift

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)