Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Descriptions :

• Leadership and Coordination: Spearhead the delivery of Quality work scopes ensuring seamless coordination among stakeholders and compliance with applicable requirements. You’ll work alongside functions such as Package Mgmt, H&S, Engineering, Construction, Supply & Expediting, Commissioning, Project Controls, Contract Management, Legal, and Procurement.
• Quality Management: Drive project to completion on time, within budget, and to the highest quality and HSE standards. Develop and maintain project Quality schedules, budgets, and forecasts, contributing directly to Company’s Renewable strategy. Ensure compliance to Project Quality requirements are met.
• Design and execute a comprehensive strategy that integrates quality management with sustainability goals to support growth objectives
• Supervise, coach and engage the Quality team to strive for excellence, to deliver solutions that meet high-level quality standards
• Continuously improve customer satisfaction by handling customer complaints promptly and professionally
• Ensure products meet quality standards before reaching customers.
• Oversee all new product development procedures, ensuring that sustainability considerations and internal controls are integrated from the beginning.
• Risk Management: Effectively manage project risks, specifically those intrinsic to the offshore wind industry, manufacturing, Quality Assurance/Quality Control, and supply chain challenges.
• Ensure that the lessons learned are effectively captured and communicated during the project
• Expected to travel to Batam to monitor and control the construction progress and customer meetings.

Job Requirements :

• Bachelor’s degree or higher in Engineering, Mechanical Engineering, or a related field.
• 5-8 years of experience managing quality of Shipyard and installation. Experience in Quality Assurance and Quality Control for onshore / offshore wind projects, preferably specific to Offshore substation construction
• Proven success in quality and process management, with a track record in quality control and continuous improvement.
• In-depth knowledge of Quality Management Practices and standards such as ISO, APQP, PPAP, FMEA, MSA, REACH, ROHS.

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

• Manage end-to-end quality control of incoming raw material, in-process monitoring and final inspection of outgoing products involving organoleptic, physical, chemical and microbiological analysis

• Conducts drinking water quality inspection and test monitoring from water treatment process to bottling process

• Conducts daily hygiene and factory housekeeping inspection including production floor, raw material storage and warehouse facility

• Maintains laboratory inventory, equipment tool calibration and maintenance • Perform monthly verification of pest control inspection and documentation

• Handle all new applications and renewal of quality standard certification in compliance to SFA (Singapore Food Agency), FSSC 22000, ISO 22000 Food Safety Management System, HACCP and Halal

• Able to conduct internal factory audits, annual ISO certification, surveillance audits and customer related inspections

• Handles external laboratory testing of source water and product drinking water in compliance to SFA standards

• Manage and investigate product complaints by customers and ensure closure in accordance with company guidelines and external regulatory requirements

• Manage risk-management procedures and report recurring issues to management and product development

• Oversees quality management compliance, customer quality index and quality control operations

• Conducts annual management review on quality system involving quality performance index, plans and improvements

• Provide training and support to relevant team on systems, policies, procedures and core processes

• Any other duties assigned by Superior

Requirement:

• Proven working experience as a QC / QA in Food Factory for minimum of 3 years

• Diploma / Degree preferred. Advantage for candidates with Certifications such as Quality Auditor, Quality Engineer, Quality Improvement Associate and Six Sigma

• Quality inspection, auditing and testing experience

• Highly motivated, self-driven and able to work in a team

• Meticulous, Independent with good communication skills, interpersonal and leadership capabilities

• Problem solver with a strong analytical mindset

• Able to multi-task

• Experience with implementation of corrective action programs

• Strong computer skills including Microsoft Office, QA applications and databases

• Knowledge & experience of data analysis tools, concepts and methodologies of QA

• Knowledge of relevant regulatory requirements

Responsibilities:

· Create, control and distribute QA related documents

· Register, track and maintain records of all incoming/outgoing drawings, documents from clients/suppliers

· Project documents/drawing submission thru Aconex

· Plan, implement and organize ISO 9001, 14001, 18001 & Bizsafe audit (Internal & External)

· Maintain proper documentation in accordance to IMS requirements

Requirements:

· Possess Diploma/Degree in Civil Engineering

· Preference with/without experience

· Proficient in MS Office

· Preference will be given to those who with experience

Job Description & Requirements

Able to operate CNC CMM machine with 2 years experience needed is a priority.

Knowledge in QC equipments, example: Height Gauge, Smart Scope, Veriner caliper etc.

With computor knowledge to provide QC report and handle NCR.

Must have knowledge in drawing specification. Example: Tolerance, Surface Treat, Heat Treat etc.

Basic knowledge in machining process.

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day

Job Responsibilities:

• Management of Quality Management Systems.
• Support and maintain relevant systems both internally and externally.
• Responsible for Documentation Control system and Audits.

Job Requirements:

• Good working experience.
• Precision manufacturing industry.
• Adequate understanding of Quality Management System.
• Team player with good initiative and proactive.
• Microsoft office.

Job summary:
Experience in marine and oll & gas sector.
Responsible for the assigned customer account, to ensure all product quality, process quality andsystem quality to conform with customers' specifications and internal quality system reauirements

Roles & Responsibilities:
1.To liaise with Customer Quality representatives on all Quality matters.
2.Lead the investigation on all Customer Quality Feedback, Complaints and CAR with internal cross.functional team for comprehensive root cause failure analysis and ensure closure with effectiveimplementation of corrective actions and preventive actions.
3. Monitor product quality performance and generate quality reports; chair monthly product qualityimprovement meetings to reduce the customer reject and field return rate for continual improvement!Identify Quality lmprovement projects and initiatives to drive Customer Satisfaction with Quality.
4.Establish with customer representative and internal team on New Product Quality plans, procedureswork instruction for overall auality control and coordinate implementatilon and maintenance of suchplans, procedures or instructions; conduct quality training/ cross training for QA inspectors.
5.Audit customer fabrication line for compliance to applicable standards and procedures in QMs andEMS

58 RECRUITMENT PTE. LTD. 19C9772 67026282

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

We are looking for a Quality Control Assistant to support the Quality Assurance Executive in maintaining the highest standard of product quality and safety.

Job Description:

• Responsible for FSMS (GMP, HACCP, ISO 22000, HALAL) monitoring
• Consistent monitoring of quality and specification of product during processing
• Perform inspection for incoming material and outgoing finished product
• Recording and maintaining data for QC information
• Collect samples for product testing
• Report to the department lead on nonconforming products or processes detected

Requirement:

• Physically fit to work in cold room environments with the ability to stand and walk for extended periods.
• WSQ Food Safety Course Level 1 and/or Level 3 certification preferred, familiarity with food/seafood handling and processing is a plus.
• Meticulous with strong organizational and communication skills.
• Strong communication, organizational skills, and ability to walk and stand in a fast-paced cold working environment.
• Proficient in English and Mandarin to interact with Mandarin/English-speaking stakeholders.
• Willing to take up ad-hoc duties assigned by the company.
• Knowledge of SAP will be advantageous.

Job Highlights

• Job Types: Permanent/Contract
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, alternate Sat
• Great learning development opportunities.
• Work-life balance and positive/friendly working environment.

Job Description

1. Supervise a team of QC Officers in all factories.
2. Guide and troubleshoot for any equipment issues, co-ordinate with external service providers Ensure laboratory equipment is calibrated in a timely manner and update calibration records. Assist to keep, control, and confirm formulation and blending procedures.
3. Respond to new and existing customers for inquiries related to quality control Conduct quality testing and communicate product specification issues. Conduct nonconforming material or nonconforming product analysis.
4. Participate in the root cause analysis of nonconforming goods.
5. Follow the instructed corrective actions and preventive actions by superiors. Establish formulation and blending procedures as needed.
6. Keep and monitor retain samples of products
7. Validate COA of raw materials received and communicate any issues to the procurement and Plant Manager Establish, update and issue GHS SDS.
8. Create certificate of analysis (COA) of products.
9. Confirm and provide resources for the laboratory and other QCR needs.
10. Coordinate sample delivery as required by the customer.

Job Requirements

• Min. Degree in Chemistry related field or
• Diploma in Chemistry with minimm 5 years of relevant experience
• Technical Knowledge : Microsoft Officer (Basic) / Good knowledge & skills on QC testing
• Ability to coach and mentor the team

Job Description..

• Ensure all packing workers are performed their jobs according to the written work instructions.
• To place packaging materials from the store by based on the packing plan.
• Verify and monitor the work done by Group Leaders and Inspectors.
• To handle and follow up on the problems forwarded by Group Leaders.
• Checked and reviewed all checklist and reports by Group Leader and below by timely basis.
• Assist final packing area.
• To provide on the job training to the Packers, Inspectors, Group Leaders other support operators.
• To ensure packing procedure and packing method are implemented and practiced.
• Ensure storage, packaging, online and final packing area are clean and tidy at all times.
• Ensure the product is stored, labeled and segregated at designated area.
• Ensure worker is handle products in correct manner and not causing any damage or contamination onto the products.
• Inform to Executive/Engineer or Manager for any equipment need to be repair, service or calibrate.
• To conduct appraisal for the worker during probationer period.
• Any other task that may be assigned.
• Help packing at warehouse.
• Performance the QAQC task in the warehouse.
• Paying attention to detail, especially when it come to quality control.

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software

About the role

To support R&D department in conducting laboratory tests, sample preparation and executing technical and quality control documentation/testing while co-ordinating with various departments to ensure smooth running of the organisation.

Roles & Responsibilities

Sample Preparation

• Receive and label all raw materials brought into the lab for accountability.
• Maintain inventory of chemicals.
• Prepare materials for experiment and assist R&D activities..
• Assist R&D Engineer to conduct experiments and operate equipment.
• Assist in the procurement and placement of all consumables, equipment and fixtures.
• 
  

Measurement & Calibration

• Perform periodic calibration of equipment and reporting of any malfunctions.
• Assist in troubleshooting and maintenance of all testing equipment.
• Ensure proper housekeeping of laboratory on a daily basis.
• Maintain and record equipment faults.
• Troubleshooting of analysis methods.

Perform Laboratory Data Analysis and Reporting

• Recording and reporting of experimental results and trends.

Quality Control

• Perform in process quality check and physical test on in-process materials & finished products
• Testing of properties of aerogel products and co-ordinating with 3rd party laboratories.
• Prepare QC documents for all batches in production department

Compliance with Safety Protocols and Local Regulatory

• Assist with the application and maintenance of all necessary governmental licenses related to the laboratory.
• Assist workplace safety initiatives.
• Implement and manage waste disposal and coordinate with chemical disposal companies.

Requirements

• ITE / Diploma in Chemical Engineering, Chemistry, Biotech, Lifesciences and Pharma etc.
• Years of work experience: At least 1 - 3 years.
• Training will be provided.
• Knowledge of safe handling of chemicals
• Possess basic computer skills and Microsoft Office applications.
• Team player and able to work independently

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘Qua_Ctrl in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, details of your educational background and work experience.

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Responsiblities

a) Manage asphalt premix production quality control processes;

b) Conduct regular inspections and testing;

c) Analyse test results and implement corrective actions;

d) Maintain quality control records and documentation;

e) Train production staff on quality control procedures;

f) Collaborate with production and laboratory teams;

g) Develop and implement quality improvement initiatives;

h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:

· Cooperate with employers and follow safety and health procedure;

· Report unsafe acts and incidents;

· Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

· Diploma / Certificate in Asphalt Technology or related fields

· Preferably with relevant experiences

· Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)

· Strong analytical and problem-solving skills

· Excellent communication and interpersonal skills

· Ability to interpret test results and make informed decisions

· Familiarity with quality management systems (ISO 9001)

· Proficient in Microsoft Office and laboratory software

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self disciplin.

Key Responsibilities

The successful incumbent will support the QA Manager in the following responsibilities.

• Ensure compliance with the Company’s food safety management system, QA standards, customer requirements, certification audits, and regulations for quality and food safety control processes.
• Support the Quality Assurance Manager (QAM) in preparing external and internal audits according to customer standards/contract requirements, and drive cross-functional teams to achieve targeted performance.
• Conduct site inspections to promote continuous improvement and adherence to Standard Operating Procedures (SOPs), hygiene, and food safety practices.
• Manage QA random sampling and microbiological testing for food samples, raw materials, water & ice, hand swabs, and Environmental Monitoring Program (EMP).
• Analyze data and follow up on unsatisfactory test results to identify potential causes of failure, recommend corrective actions for process improvement, and prevent recurrence.
• Prepare documentation related to all export matters in the capacity of Quality Person (QP).
• Develop training materials and conduct food safety trainings for operational staff.
• Review new product artwork to ensure regulatory compliance.
• Assist QAM in food safety incident management, including site investigations, testing, and preparation of incident reports.
• Support QAM in maintaining the ISO 22000/HACCP manual and QA documentation.
• Assist in the supplier approval program (supplier assessment/documentation review).
• Contribute to QA work plans and initiatives aimed at improving QA processes and food safety standards.
• Support Group QA, annual emergency exercises, and ad-hoc catering events as required.

Key Requirements

• Minimum Degree in Food Science/ Technology or other relevant fields.
• Minimum 2 year of QA experience in the food industry.
• Passionate in upholding food safety and possess good knowledge of Food Regulations, SFA requirements, GMP, and food safety management certifications (e.g., HACCP, ISO 22000, GFSI standards).
• Keen learning attitude, proactive, and decisive.
• Detail-oriented and meticulous with competency in report writing and presentation skills.
• Independent, committed and possess strong interpersonal communication skills
• Ability to multi task, handle stress in a fast-paced environment, and meet tight deadlines.
• Excellent interpersonal and communication skills.
• Collaborative and able to work effectively in a team.
• Must be comfortable working in a cold environment.

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Physically Fit, able to carry at least 10kg machine parts

Work Place : Pasir Ris (2 weeks training @ Woodlands)

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

OT available