Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

Responsiblities

a) Manage asphalt premix production quality control processes;

b) Conduct regular inspections and testing;

c) Analyse test results and implement corrective actions;

d) Maintain quality control records and documentation;

e) Train production staff on quality control procedures;

f) Collaborate with production and laboratory teams;

g) Develop and implement quality improvement initiatives;

h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:

· Cooperate with employers and follow safety and health procedure;

· Report unsafe acts and incidents;

· Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

· Diploma / Certificate in Asphalt Technology or related fields

· Preferably with relevant experiences

· Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)

· Strong analytical and problem-solving skills

· Excellent communication and interpersonal skills

· Ability to interpret test results and make informed decisions

· Familiarity with quality management systems (ISO 9001)

· Proficient in Microsoft Office and laboratory software

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job description:
• Perform dimensional/functional inspection of First Article (FA), Incoming, In-process or Outgoing parts in accordance to Work Instructions to ensure that components and products conform to specifications.
• Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.
• Maintain the control of the manufacturing environment and perform gowning as necessary.
• Perform recording of inspection data, monitoring data and other data in accordance to Records Control requirements.
• Perform other tasks as assigned by the supervisor.
• Work experience as an quality inspector.

Candidate Profile & Requirements:
• Candidate must possess at least a Secondary School/"O" Level, Higher secondary/PreU/A level/College,Professional Certificate/NiTEC, any field.
• At least 2 years of work experience as inspector in a machine shop.
• Proficient in regular measurement instruments. Capable of operating CMM is an advantage.
• Able to read and understand engineering drawings and GD&T.
• Good interpersonal skills; organized; self disciplin.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage QC equipment life cycle from qualification to decommissioning including calibration and maintenance plan follow up

Key Responsibilities:

• Technical responsibilities
• Manage new QC equipment qualification as per change control and validation processes (i.e. URS, System classification, Audit trail review assessment, DQ/IQ/OQ, PPC09)
• Be author of SOPs/ protocols/ reports/ training materials
• Manage decomissioning of QC equipment and follow disposal
• process
• Maintain our QC asset listing up to date Follow QC equipment routine lifecycle
• Coordination of calibration and maintenance plan with user and external vendor/TS team
• Coordination of equipment troubleshooting if occurence of failure/breakdow (i.e. Tag in/out equipment, Work order creation)
• Sample transfer, alarm management and cleaning for fridges, freezers and incubators
• Liaise with external vendor for service quotation, escort vendor during service and approve invoice timely
• Supports compliance activities:
• Performs regular Ll audits in QC
• Coordinates and supports all L2, L3 and L4 audits and the associated CAPAs
• Lead and manage continuous improvement projects Subject-matter-expert (SME)/ audit fronter for assigned topics
• Manage ad-hoc tasks
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget
• Decision Making
• Proposals & Recommendations
• Based on experience & knowledge of work
• Proposal of CAPA for any issues/ deviations/ exceptions/ risks
• Proposal of QC improvement projects and strategies
• Team training and development

Skills:

Professional

• For Specialist - University Degree in a relevant Science discipline with at least 2 years of working experience or Diploma with at least 5 years of working experience
• For Senior Specialist - University Degree in a relevant Science discipline with at least 4 years of working experience or Diploma with at least 8 years of working experience

Technical

• Competent technical skills in project management
• Computer system validation Knowledge of cGLP & cGMP

Business

• Effective report writing skills
• Planning and Organizing skills
• Good interpersonal and communication skills
• Effective team player
• Analytical skills with logical thinking Problem solving skills

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking
• Leadership skills (advantage)
  ​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To perform testing and support related activities in QC Biological team

Key Responsibilities:

• Perform routine and adhoc/ non-routine testing in the following areas with good observation of GMP requirements:
• Biological testings for raw materials release (All QA controlled materials). Biological testings refer to biochemistry and/ or microbiological testings.
• Biological testings for intermediates and product
• Biological testings for utilities (city water, purified water, water of injection, compressed gases, etc)
• Biological testings required to support manufacturing process validations and confirmations
• Perform routine environmental sampling in controlled environmental areas
• Initiate and participate in laboratory investigation (OOS / deviations / atypical results / invalid results) and assist in timely closure of the investigation and CAPA
• Perform equipment calibration, maintenance and validation
• Participate in method transfer / verification / validation
• Participate in peer review for verification of task and data
• Assist in SOP writing
• Identify and report problems in QC to QC Superintendent in a timely manner
• Practice 6S and ensure good housekeeping of laboratory, work area and equipment
• Ensure good inventory of QC materials (purchased and prepared materials / glassware) to support testings; ensure no over surplus of inventory
• Ensure wastes are disposed appropriately and promptly
• Adheres to all safety and security policies and practices
• Assist the Senior Superintendent/Superintendent in the management and operations of the team; may be indirectly responsible for a team of associates:
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely availability of test results
• Reviews test reports to ensure accuracy of test results in accordance with corporate, regulatory and external agency regulations.
• Provides training to the team.
• Provides guidance, support and technical expertise to the team.
• Involves in investigation and protocol writing (when required)
• Involves in SOP writing and updating
• Organization and Problem Solving:
• Creates strong team morale and a culture of accountability and ownership
• Recommends and coordinates appropriate corrective actions to quality problems in conjunction with other teams/ departments
• Presents in timely manner major issues to the management with strategies on their resolution.

Skills:

Professional

• For QC Associate, fresh graduate in NITEC/ Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry
• For Senior QC Associate, NITEC/Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry, with at least 2 years of working experiences or Fresh degree holder in Microbiology Biotechnology, Life Sciences, Chemistry, Biochemistry. Increased number of years of experiences are required for higher positions.
• For Lead QC Associate, NITEC/Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry, with at least 8 years of working experiences or Degree holder in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry with at least 4 years of working experiences.

Technical

• Competent technical skills in the following:
• Good laboratory knowledge and hands-on experience in chemistry testings o Laboratory equipment qualification
• (advantage)
• Knowledge of cGLP & cGMP (advantage)

Business

• Effective report writing skills
• Planning and Organizing skills
• Effective team player
• Analytical skills with logical thinking
• Good interpersonal skills
• Leadership skills (advantage)

Competencies:

• Good command of English
• Good knowledge on usage of computers

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Physically Fit, able to carry at least 10kg machine parts

Work Place : Pasir Ris (2 weeks training @ Woodlands)

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

OT available

KEY DUTIES AND RESPONSIBILITES:

1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.

1. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
2. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
3. Ensure readiness of QC Laboratory in internal / external audits.
4. Maintain data integrity in Quality Control activities and ensure appropriate traceability.

6. Initiate change control documents.

1. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
2. Participate in New Product Introduction activities.

9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.

1. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
2. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
3. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
4. Escalate the quality events, trends as appropriate to QC Head.
5. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
6. Serve as subject matter expert on laboratory instrumentation and compliance issues.
7. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
8. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
9. Maintains a safe laboratory environment by implementing recommendations made by EHS.
10. Initiate CAPEX for equipment purchases.

20. Support in budget preparation for QC Laboratory.

21. Any other activities as and when assigned by the Superior.

JOB REQUIREMENTS:

· EDUCATION: Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

· EXPERIENCE: Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

• Possess working knowledge of GMP in the pharmaceutical industry.
• Excellent interpersonal and analytical skills, good verbal, and written communication skills.
• Working knowledge of qualification, calibration, and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
• Working knowledge of method development, validation, verification of analytical method.
• Familiarity of 21 CFR Part 11 requirements.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To be responsible for managing the interactions with third party organisations that supply QA incoming materials and/or services to GSK.
• To manage material release for incoming materials, supplier change notifications and new material management.
• To provide Quality oversight to logistics management and warehouse operations.

Key Responsibilities:

Supplier Management

• Provide QA oversight of Supplier management activities on site to achieve compliance with company policies and government regulations as assigned.
• To participate (Executive 1) and to represent the site (Executive 2) for Supplier Management business processes to drive improvements and share best practises across the GSK Vaccines network.
• Process owner/support supplier complaint process for QA incoming materials. Lodge supplier complaints and ensure suppliers identify the root cause and associated CAPA's to prevent recurrence of supplier quality issues.
• Review and track supplier-related CAPA for timely closure.
• Maintain inspection readiness, conduct supplier assessments for both new and current service providers in a timely manner.
• Maintain the approved supplier listing and audit schedule in a state of compliance and accuracy.
• Assess supplier change notifications in a timely manner and escalate where necessary especially in situations with supply impact.
• Initiate and review deviations/change control/CAPA associated with incoming material.

Executive 1: Minor deviations and CAPA

Executive 2: Minor, major deviations and CAPA

• Work closely with site user and Global stakeholders for Supplier management related matters

QA Raw Material Release and Warehouse oversight

• Support incoming material documentation review and release to recommend and confirm Usage Decision (UD) of raw material
• Ensure that material document file (MDF) is complete and accurate before disposition of material in SAP
• Ensure that system is in place for filing and archival of MDF
• Initiate and review deviations/change control/CAPA associated with incoming material releases.
• Ensure that all deviations/change controls are closed or assessed for impact on the release of the material prior to release the QA-controlled incoming material
• Provide QA oversight to warehouse such as attending warehouse tier, conduction GEMBAs, inspection readiness and warehouse related deviations, CAPAs and change control

Decision Making:

Proposals & Recommendations

• Propose improvements to work processes, with basic awareness of business requirements.
• Deviation investigations and assessments
• In addition for QA Executive 2:
• Able to provide QA oversight on routine situations independently and complex situations with supervision (deviations, changes, system issues, compliance matters)
• Able to manage simple department projects (e.g. continuous improvement) with supervision
• Greater awareness of business requirements and to highlight considerations where there is a need for escalation

Skills:

Professional

• At least University basic degree in a Science or Engineering discipline

Technical

• A good understanding of cGMP regulatory and legal requirements as applied to quality assurance of pharmaceuticals manufacturing
• User experiance with SAP will be prefered
• Ability in handling and organizing multiple workflows

Business

• Ability to apply optimal quality assurance standards to promote a business edge
• Ability to facilitate business activities commpatible to international regulatory environment
• Ability to communicate effectively within the site organization and across the network

Competencies:

• Working knowledge of FDA/EU/ICH/WHO as well as all other relevant reuglatory and technical guidelines
• Possess Analytical and Quality performance mindset
• Demonstrate professional & ethical integrity
• Fluency in the English language
• Demonstrates sense of urgency
• Ability to work both as an individual contributor and as a team player.

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage logistic activities within QC department

Key Responsibilities:

• Performs receipt and storage of sample in accordance to local procedure.
• Performs routine and non-routine sampling of raw materials and utilities with observation of GMP requirements
• Ensures proper packaging of samples and correct samples are shipped to offsite recipient timely
• Ensures a good inventory of QC materials (purchased and prepared materials/glassware) to support testings; ensures no over surplus of inventory
• Ensures wastes are disposed appropriately and promptly.
• Practices 6S and ensures good housekeeping of laboratory, work area and equipments.
• Supports equipment calibration and maintenance, performs autoclave requalification and washing machine verification
• Performs peer review for verification of task and data.
• Participates in laboratory investigation (when required) and assist in the timely closure investigations, CAPAs.
• Ensures proper archival of submitted document for easy retrieval
• Identifies and reports problems in QC to supervisor in a timely manner.
• Adheres to all safety and security policies and practises
• Manages ad-hoc support tasks
• Assist QC support manager in the management and operations of the team
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely sample and material management Provides training to the team
• Provide guidance, support, and technical expertise to the team Involves in investigation and protocol and report writing (when required).
• Involves in SOP writing and updating.
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget

Skills:

Professional

• For QC Support Technologist - Fresh graduate of NITEC, Diploma in Science (or equivalent)
• For Senior QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 4 years of experience/Degree holder with at least 2 years of working experience.
• For Lead QC Support Technologist Graduate of NITEC, Diploma in Science (or equivalent) with at least 8 years of experience/Degree holder with at least 4 years of working experience.

Technical

• Competent technical skills in good laboratory knowledge and hands on experience in inventory management
• Knowledge of cGLP & cGMP

Business

• For QC Support Technologist, Senior QC Support Technologist 1, 2
• Basic report writing skills (preferably with legible hanwriting)
• Basic planning and organizing skills (for individual time management and work planning) Good interpersonal skills
• Team player
• For Senior QC Support Technologist 3 and Lead
• Effective report writing skills
• Planning and organizing skills (for individual time management and work planning)
• Leadership and problem solving with analytical and logical thinking

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking

​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Physically Fit, able to carry at least 10kg machine parts

Work Place : Pasir Ris (2 weeks training @ Woodlands)

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

OT available

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Quality Technician, Product Quality is responsible for product release of complete instrument and play key role in ensuring the released instrument is meeting quality and regulatory requirements.

This position reports to the Senior Manager, PQE and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Perform outgoing product release (Device History Records buy-off) and inspection on instruments according to documented procedures.
• Perform part tracking for install and complaint issues. Ensure part is being received so failure analysis can be initiated.
• Support in complaint investigation activities. The job also require work with cross functional team and ensure proper investigation records is generated.

The essential requirements of the job include

• Diploma/ ITE in Engineering or equivalent.
• 2-3 years of relevant working experience in QA is required.
• Knowledge of the following QMS standards - ISO9001 QMS, ISO13485 QMS and FDA 21 CFR Part 820 is strongly

It would be a plus if you also possess previous experience in:

• Experience with working in a manufacturing environment is preferred.
• Experience in performing product release activity for medical equipment’s.

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Element has an opportunity for an experienced Quality Engineer. Reporting to the Principal Quality Manager, you are an essential member of the management team and responsible for the overall quality performance. This includes implementation, maintenance and improvement of Element quality management system (QMS). The successful candidate will have a sound working knowledge of ISO/IEC 17025, ISO/IEC 17020 or ISO/IEC 17065 requirements in relation to testing, calibration inspection and certification.

In this role, you will have interaction with clients, Accreditation Bodies and will be responsible for advising operational colleagues of the importance of quality, accuracy and integrity in the provision of the testing, calibration inspection and certification services we provide.You will be involved in leading quality at a local level and will work closely with the Principal Quality Manager to ensure that Element quality policies, processes and procedures are effectively implemented. As a quality leader within Element you will be capable of driving a culture of quality assurance and quality improvement, working closely with your operational colleagues and the wider Element quality community.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Ensuring all staff buy-in to the effective and efficient implementation of Element quality policies and procedure by providing advice, guidance and support on quality issues to Element Singapore and Malaysia business units.
• Driving quality improvements at every opportunity and proactive participation in continuous improvement and process improvement projects and ensure effective adoption of Element e-QMS throughout Element Singapore and Malaysia business units.
• Proactive participation in projects to deliver identified Quality objectives and contribute to and drive key initiatives to improve Quality awareness and compliance.
• Management of and participation in scheduled internal audits across management system and technical disciplines and proactively monitoring laboratory test equipment for calibration currency and advising management of upcoming schedules,ensuring corrective and preventive actions identified within specific laboratories are implemented and verified in a timely manner.
• Represent Element Singapore and Malaysia business units during assessments by accreditation bodies and audits by clients and controlled document holding and arrange to update appropriate documentation as necessary, control and issue of Element Singapore and Malaysia Quality Management Systems documentation and participate in the internal audit programme to monitor implementation of quality policies and procedures.
• Manage external and internal proficiency testing programs of all Element Singapore and Malaysia business units and prepare compliance and improvement metrics for Element Singapore and Malaysia business units quality as required.
• Writing and reviewing quality documentation as required and effective and efficient management of personal work schedules and timely generation of Element Singapore and Malaysia business units quality reports.

Job Requirements:

• Minimum Bachelor of Science or Engineering qualification.
• Proven experience (minimum two years) of managing quality management systems within a multi-discipline testing, inspection and certification environment, preferably multi-location.
• Demonstrable experience auditing against ISO/IEC 17025, ISO/IEC 17020 and ISO/IEC 17065.
• Sound knowledge of equipment calibration and analysing proficiency test data.
• Knowledgeable in uncertainty of measurement and risk assessment and hands-on experience with Element e-QMS preferable.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

HOYA Technosurgical, is a subsidiary of HOYA Corporation, established in Tokyo, Japan in 2013, which has the origin of PENTAX medical business unit in 1974 arising from the merger of former PENTAX medical business unit & Japan Universal Technologies, Inc. HOYA Technosurgical has setup their first overseas plant in Singapore focusing on manufacturing, research & development and sale of Chromatography Media to pharmaceutical companies.

Main Purpose of Job:

This new position is responsible for performing production-related inspection jobs, carrying out equipment and calibration, and maintaining documentation and records.

Key Duties & Responsibilities:

· Prepare the lab for ISO 9001:2015 certification audits, including laboratory equipment qualification and method validation.

· Responsible for manufacturing management and quality control (QC) based on the quality assurance system (QAS)

· Design and develop forms, work instructions and methods for testing and evaluation.

· Utilizing knowledge in engineering fields for chemical and product quality inspection.

· Ensure lab equipment/instrument calibration and maintenance are maintained as planned.

· Trend and feedback of monitoring data to relevant sections and drive for investigation and action as necessary.

· Chemical Analysis of products using ICP, X-ray diffractometer, HPLC, FTIR, particle size analyser, UV, Endotoxin test and chloride, sulfate, carbonate limit test.

· Carry out TOC, Endotoxin test, and environmental monitoring tests.

· Carry out maintenance and calibration of equipment. Maintain accurate inspection, maintenance, and calibration of records.

· Perform investigation when the test is out-of-spec or abnormal.

· Prepare validation documents and carry out the qualification of equipment etc.

· Cross function collaboration to achieve compliance with quality requirements, improvements, development and implementation of new products /processes, supporting customer complaints, etc.

· Process explanation and audit support in customer audit

· Corrective and preventive action (CAPA) support

· Perform all other duties assigned by the supervisor or manager.

Education:

Diploma in a scientific discipline or possess equivalent experience or higher.

Experience:

· Five years’ experience in a medical device or pharmaceutical laboratory environment

· Have experience with lab equipment such as HPLC, ICP, FT-IR, UV Spectrometer and environmental monitoring sample testing.

· Familiar with ISO 9001:2015 requirements.

Proficient in Microsoft Word and Excel

Working Conditions:

Work is generally performed within an indoor laboratory environment with adequate temperature. Personal protective equipment (PPE), such as a Laboratory coat, Safety shoes, Appropriate gloves, hearing protection, Respiratory Protection etc., will be required for potential exposure to hazardous chemicals and noise hazards.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

The Quality Control Clerk plays a vital role in ensuring the quality of products and processes by performing various administrative and inspection tasks. This position requires attention to detail, organizational skills, and ability to work in a fast-paced environment.

Administrative Tasks

1. Maintain accurate and up-to-date quality records, files, and databases.

2. Assist in document control, including revising and distributing quality procedures and policies.

Inspection and Testing

1. Conduct visual inspections of products, materials, and packaging.

2. Verify simple product conformity to specifications, drawings, and standards.

3. Perform sampling inspections and testing as required.

4. Document inspection results, nonconformities, and corrective actions.

Quality Control Processes

1. Identify and report quality issues, defects, or nonconformities.

Communication and Collaboration

1. Liaise with production, procurement, and engineering teams to resolve quality issues.

2. Communicate quality requirements and standards to suppliers and vendors.

3. Collaborate with internal stakeholders to improve quality processes.

REQUIREMENTS

Education level:

1. Min. Higher Nitec/Diploma level ME/Mechatronic or it relevant.

Experience level:

1. 1-2 years of experience in quality control, inspection, or related field.

2. Experience in manufacturing, aerospace, automotive, or medical device industries preferred.

Skills:

1. Strong attention to detail and organizational skills.

2. Excellent communication, interpersonal, and problem-solving skills.

3. Familiarity with quality management systems (e.g., ISO 9001, AS9100).

4. Proficient in MS Office.

Certifications:
1. Certified Quality Inspector (CQI) or Certified Quality Technician (CQT) certification desirable.

Physical Requirements:

1. Ability to work in a manufacturing environment.

2. Lift up to 12kg occasionally.

3. Stand, walk, or sit for extended periods.

Hiap Tong Crane & Transport is hiring Credit Control cum Administrative Assistant.

Job scope:

- In charge in calling & liaise with customers to follow up on outstanding payment

- Prepare monthly Statement of Accounts & payment reminder to customers

- Maintaining accurate records of customers' payment history and debt recovery efforts

- Assist in Generating and Sending invoices to customers

- Office administrative & clerical works

- Any other ad-hoc tasks as assigned

Requirement:

- Competent in Microsoft office application

- Possess good working attitude & sense of responsibility

- Excellent communication and negotiation skills

- Strong understanding of credit risk assessment and collections processes

- Detail-oriented, organized, and capable of meeting deadlines.

- Ability to work independently and as part of a team

- At least 01 year of proven experience as a Credit Controller or similar role in finance/accounting

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

Job description

Non-Destructive Testing (NDT) technicians examine structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques. They conduct material tests, interpret the results, and generate reports on their findings.

Requirements

Bachelor's degree in mechanical engineering, structural engineering, or a similar field.

Relevant NDT certification.

10+ years' experience as an NDT technician.

Advanced knowledge of NDT technologies including ultrasound, infrared, and radiographic.