General Overview

The position is part of the Instrument Control and Electrical (ICE) team who is responsible for developing plans and schedules and providing advice to production and engineering team on all maintenance activities at the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Daily planning and scheduling of maintenance tasks to carry out all required preventive, corrective and predictive maintenance of ICE asset in the Terminal
• Work closely with Mechanical, HSSE team to liaise with the Production and Jetty Operations team in the planning and analysis of each work request including coordinating the acquisition of electronic work permits.
• Carry out daily morning toolbox meeting for job assignments, briefings and any ICE-MECH work coordination communications
• Proficient in SAP to be able to carry out monitoring and scheduling of ICE PM & CM workorders, maintaining of ICE master equipment list, PM plans and raising purchase requisition for spare parts etc
• Liaise with External Authority for approval for Natural Gas Equipment maintenance request
• Close communication and co-ordination with external vendors and contractors to attend in house safety induction course, carry out site survey, site execution work etc
• Review Method of Statement and risk assessments are valid for the job
• Responsible for following up and verification that all jobs for close out are properly completed in SAP
• Raise Purchase requisitions in SAP and provide scope of supply and spare part specifications and work closely with Procurement Department for evaluation of vendor quotations for maintenance service contract/technical work outsourcing, monitoring of delivery of spare parts and materials etc
• Assist in the development of Maintenance budget, provide budget forecast, monitor and manage approved budget.
• Apply Jurong Island Pass sponsorship for external vendor.

Work Experience

• Minimum 5 (Degree) years and 8 (Diploma) years of experience in an oil and gas/petrochemical E&I maintenance supervisory or E&I maintenance planning and scheduling role
• Proficient in usage of Microsoft Office computer software and SAP systems
• Excellent organizational skills and adaptability to work in dynamic environment.

Education

• Engineering Degree/Diploma preferably in Electrical/Instrumentation/Chemical Engineering discipline.

Job Description

• Conduct regular site inspections and ensure environmental compliance
• Report and submit Environmental Control Report in accordance to the prescribed format to the client
• Conduct Meeting
• Plan and organize safety promotion program
• Liaison with relevant authorities, client and all others
• Supervision of Workplace Safety and Environment workers

Requirements:

Must be NEA Registered ECO for Specialised Premises

Minimum 2 years of relevant experience

Knowledge of government regulations relating to occupational safety, health and environmental

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

The purpose of this job is to assist the Company with the quality assurance activities on an ongoing basis. The role entails a variety of responsibilities, such as:

• Perform incoming material (e.g. cement, sand, etc), in-process and outgoing materials(UHPC Quality Mix) inspection activities according to the QAQC procedures and plans to ensure compliance with ISO and in-house standards.
• Operate and maintain QAQC laboratory equipment properties (e.g., TGA, BET, PSA, SEM, XRD, sieve analysis) to ensure optimal performance for analysing material, manage the safe storage of hazardous materials, and assist with periodic quality audits.
• Preparation of sampling list for weekly production and maintain the consumables inventory item at laboratory.
• Collect samples for incoming raw material quality checks.
• Manage retention samples, including proper labelling and organized storage.
• Maintain laboratory premises and equipment in accordance with the Company’s standards.
• File & maintain product inspection records.
• Perform 5S and laboratory housekeeping.
• Support the company’s research and development initiatives.
• Execute any additional duties or ad hoc tasks as assigned.
• Strictly adhere to safety standards in all activities to ensure a safe working environment for all.

Main scopes

• Quality Control and Assurance
• Documentation works
• Coordination with Contractors and Subcontractors
• Assisting Project Manager Planning project schedule

Requirements

• Education: Degree or Diploma in relevant job educations
• Experience: 1–3 years of relevant working experience. (Fresh graduations are welcome)
• Skills: Proficiency in computer software and paperworks

Job Description

Role: Quality Engineer (QE)

Position Overview:

The Quality Engineer is responsible for ensuring the quality of construction materials, processes, and workmanship throughout a project. This role involves developing QA/QC documents, monitoring site quality control activities, monitoring compliance with standards, and implementing quality assurance procedures to deliver projects that meet contract, client specifications, international standards, and Singapore regulatory requirements. This role is essential to delivering high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in developing QA procedures as required by the project Quality Assurance Plan.

2. Develop and/or review QC report templates and checklists as per ITPs.

3. Participate in developing quality training materials per project quality requirements and technical specifications. Conduct quality training for subcontractors’ QC inspectors and site supervisors.

4. Conduct regular checks for site QC activities and QC report completion.

5. Cover day-time site inspections for civil works as per ITPs when it is needed by site situations.

6. Take part in project internal quality audits in accordance with project audit procedures to ensure compliance with company ISO 9001 QMS, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

7. Take part in project external quality audits to subcontractors in accordance with project audit procedures to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

8. Regularly monitor project KPIs, and ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, in the meantime, report to the QAQC manager.

9. Coordinate with discipline engineers, subcontractors, the client, and third-party inspectors to ensure project quality requirements are met.

10. Take part in preparing mechanical completion documents before commissioning.

11. Prepare the Turnover Package (TOP) at the project ending stage.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime may be required, and working at a fast pace.

Requirements for the role:

Ø Degree or Advanced Diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant Experience in quality assurance (QA) and QA document development in Singapore for civil engineering projects.

Ø Experience in site quality control (QC) related inspection and tests.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent quality problem-solving and analytical skills.

Ø Strong communication and interpersonal skills.

Ø Experience in the CONQUAS process.

Ø Certification in Quality Management (e.g., ISO 9001) is a plus.

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Today, Lonza is one of the world’s largest healthcare manufacturing organizations operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Key responsibilities:

• Perform system and routine maintenance activities, including but not limited to user access management, system monitoring, software configuration, backup and recovery for control systems and networks.
• Provide support to resolve control system-related issues and failures by fixing and solving them, and engage with system vendors as required.
• Identify performance and security gaps to ensure computerized system integrity and proactively seeks out improvements and solutions.
• Oversight of control system policies and procedures to ensure alignment with current regulatory requirements.
• Provide office as well as after-office hours support (based on on-call rotation) to ensure smooth operation of the control systems supporting GMP production.
• Provide assistance to Engineering Support Team, Manufacturing, MSAT department where multi-functional support is needed to address and find root causes.
• Own and perform TrackWise deviation investigations and write-up on control system failures/errors; deviation trend review and root cause analysis as required per Lonza Quality requirements.
• Own change controls to plan and implement changes within stipulated timelines, meeting GDP and GMP requirements.
• Support control systems Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT) and other site qualification activities as needed.
• You should be familiar with 21 CFR Part 11 and EU Annex 11 requirements. Also, you need to know about data integrity requirements and expectations. Additionally, you should be aware of common industry practices related to GMP computerized system administration and management.
• Support the team to ensure inspection readiness at all times.
• Perform periodic reviews with respect to user authorizations and system audit trails.
• Support Data Owners in data audit trail reviews in terms of electronic data retrieval.
• Any other duties as assigned by Supervisor / Manager.

Key requirements:

• Degree or Diploma in Computer Science, Engineering, Information Systems or a related field.
• Relevant work experience in the design, implementation and/or support of instrumentation and control systems, preferably in the Bio-Pharmaceutical, Pharmaceutical, F&B industry.
• Experience with distributed control system, software development methodologies and automated system life cycle support in a regulated industry.
• Experience with various Windows operating systems, server architecture and control system-related infrastructure fundamentals.
• Proficiency in implementing standard methodologies for automation design and code development.
• Good understanding of cGMP’s requirements particularly as they relate to the operation, validation and maintenance of computer-controlled systems.
• Strong problem-solving and analytical skills.
• A valuable teammate, capable of working collaboratively with different teams.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

PRINCIPAL ACCOUNTABILITIES

SQP oversees critical and non critical supplier mainly mechanical parts in. SQP is responsible in leading before and after FAS (First Article Submission) qualify and monitor quality performance of new / existing suppliers and ensure uninterrupted supplies of materials and services. He/ She should be able to foster close relationships with suppliers and partners and be able to communicate their value to the company.

JOB RESPONSIBILITIES

1. Lead and Drive First Article Submission for new and existing supplier

Supplier Quality Professional develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier. Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI. SQP shall work with Sourcing and Engineering, to engage and educate suppliers/sub-contractors.

2. Lead quality performance review

Worked closely with suppliers, to monitor conduct audit for vendor performance. Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers. Guide Procurement and team for supplier performance review process.

3. Supplier Development.

SQP shall drive for vendor development, identify and develop new special process to meet turnkey objective and reduce leadtime of supplier.

4. Analyse supply market.

SQP shall propose and execute creative ways to improve supplier process which creates financial value to the organization.

5. Maintain good relationship with stake holders and customer/s

SQP maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality. Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.

6. Develop Product Quality Control Plan

SQP shall also be in charge in developing Quality Control Plan according to the requirements of the customer. He/She shall ensure that required processes and documentations and surveillance points are identified in the QCP. He/She shall liase closely with the customer during development of the new QCP and revision of the existing QCP and its approval (internal and Customer).

7. Customer /Third Party Inspection coordinator

SQP shall manage Customer and Third Party inspection of products/parts. He/She shall ensure that each Quality Control Plan activity which requires surveillance points are monitored and conducted accordingly. He/She will liase and communicate closely with the internal and external customers to ensure that TPI inspections are executed according to the plan schedule.

8. Perform any ad-hoc duties as and when assigned by the superior.

9. All employee of Completion Products Pte Ltd shall observe the highest standards of ethics and integrity in undertaking purchasing activity and act in a honest and professional manner that supports the standing of Completion Products Pte Lts core value.

10. Ensures 5S is implemented in the work area.

11. Adheres company’s guidelines with regards to Safety and Quality.

12. Complies to Company Code of Business Conduct.

13. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Decision Quality – making good and timely decisions that keep the organization moving forward. Good decisions that are a mixture of analysis, wisdom, experience and judgement.

4. Customer focus – Building strong customer relationships and delivering customer-centric solutions.

5. Drives Result – consistently achieving results, even under tough circumstances. Results might be quantifiable – measured in terms in P&L, sales growth, customer satisfaction ratings, new product launched. Qualitative result -- an enhanced reputation among customers, a more vibrant brand that attracts customer and employee talent.

QUALIFICATION GUIDE

1. Education : Minimum Degree in Technical/Engineering course preferably Mechanical

Engineering

2. Communication : Fluent both in oral and wriiten English communication

3. Experience : Minimum 5 years of working on the same field . Experience in Oil and Gas

manufacturing is an advantage.

4. Experienced as Internal Auditor or Supplier Auditor is an advantage

5. With API or ISO Certification is preferred

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

Main duties and responsibilities :

1. Incoming QA(IQA) and Outgoing QA (OQA) Inspection
2. Quality Wall (QW) buy off
3. Weekly process audit
4. Non Conformance Material Report (NCMR)

Experience and knowledge :

1. Min "O” level with 3 years of related experiences in a manufacturing environment.
2. Knowledge of Microsoft (words, excel and ppt) is a must.
3. Knowledge of Stamping, Plating, Molding and Connector Assembly is an added essential.

Skill Required :

1. Good knowledge on measurement methodology and equipment (profile projector, TM scope, OGP smart scope).
2. Exposure in Process and QMS Audit.
3. Knowledge of Quality tools such as SPC and 7 QC tools.
4. Good interpretation of product drawing, specification and Inspection Plan.

Job Requirement :

1. Able to work independently
2. Able to work rotation shift

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Leica Microsystems, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

Shape the Future with Us!

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Senior Quality Engineer, PQE is responsible to ensure the quality of both medical and non-medical products through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will address production quality issues, collaborate with cross-functional teams to find root causes, and drive continuous improvement to build high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, attention to detail, a proactive mindset, and preferably experience in people management.

This position reports to the Senior Manager Quality Assurance and is part of the Production Quality Engineering (PQE) team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Address production quality issues by identifying problems and collaborating with cross-functional teams to develop solutions for overall product quality improvement.
• Utilize statistical tools to identify trends and patterns for enhancing the production process and ensuring quality.
• Investigate and correct root causes of product failures occurring in the field.
• Conduct periodic production audits to ensure compliance with established policies, procedures, and control plans.
• Participate in lean and continuous improvement initiatives, while adhering to company EHS requirements to prevent injuries and maintain safety.

The essential requirements of the job include:

• Bachelor's degree in Mechatronics, Mechanical Engineering, or Electronics.
• At least 5 years of relevant experience in biomedical or medical device manufacturing.
• Proficient in statistical control methods and QMS 9001; familiarity with ISO13485, USFDA QSR/cGMP, and ISO14971 for medical devices is advantageous.
• Computer literate in MS Office and Lotus Notes.
• Strong analytical, problem-solving skills, and knowledge of lean and investigation tools such as 8D and fishbone diagrams, with a solid understanding of engineering principles, theories, and concepts.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

• Carry out incident investigation, VDR analysis, on board audits / inspections and training as assigned.
• Assist the company with business development, where possible.
• Perform duties of Training Faculty when required.
• Visit and assess vessels for compliance with owners / managers requirements, industry regulations and best practices.
• Under the direction of the General Manager / Team Lead, ensure all assigned jobs are delivered in line with its expectations and ensure quality standards are uniformly maintained.
• Keep up to date with national, regional, and international legislative requirements and practices to support company compliance with all relevant regulations.
• Perform tasks as per the deliverables agreed with the client.
• Interface with vessel operators to ensure vessel performance standards.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

• Define, develop, and manage the I&C work package scope, schedule, and budget.
• Monitor progress of work packages and ensure they are executed according to schedule and budget.
• Coordinate between various engineering disciplines (mechanical, electrical, civil, etc.), vendors, contractors, and project management teams.
• Ensure effective communication and reporting of progress, issues, and milestones to senior management and stakeholders.
• Ensure that all work packages comply with project specifications, industry standards, safety regulations, and quality control requirements.
• Manage the procurement process for I&C materials, equipment, and services, ensuring on-time delivery and conformance to specifications.
• Enforce strict safety protocols and ensure that the work environment adheres to company and regulatory safety standards.
• Develop and maintain comprehensive documentation for all I&C work packages, including drawings, specifications, test plans, and procedures.
• Provide regular and detailed reports to project management regarding work package performance, milestones, and any issues that arise.
• Oversee the commissioning and testing of instrumentation and control systems to ensure proper functionality and integration with the overall system.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Qualification: Degree in Engineering preferably Chemical or Mechanical or Diploma with min 5 years Quality experience.

Job Requirements: Minimum 5 years working experience in manufacturing environment preferably in Quality. Knowledge of ISO 9000, ISO 14001 and ISO/TS 16949 Computer Literate. Able to work independently and a team player.

Reporting Level: Quality Engineering Manager/ Artwork and OF Manager

Duties and Responsibilities:

1.1. To support the Quality Manager to meet the company objectives and goals.

1.2. Manage activities of incoming inspection to assure that materials used meet quality requirements

1.3. Oversee the product inspection activities within the company and QA activities within the department.

1.4. Overseeing outgoing inspections to ensure products meet customer requirements, including 100% firewall activities.

1.5. Developing, reviewing, and approving quality control methods and procedures to ensure that products meet customer specifications

1.6. Conduct training sessions for staff on quality standards, procedures, and best practices.

1.7. Manage and maintain quality documentation; and Prepare and review quality reports, metrics, and key performance indicators (KPIs)

1.8. Handling and managing customer complaints, coordinating with relevant departments for resolution, and ensuring timely responses to customers.

1.9. Prepare and manage corrective and preventive action reports (e.g., 8D reports) or relevant report(s) to customer.

1.10 Develop and initiate quality improvement programs, coordinating with internal departments and external parties (e.g., suppliers) to ensure successful implementation and measurable improvements.

1.11 Implement and uphold quality, environmental, and safety management systems such as ISO 9001,IATF 16949, ISO 14001, and applicable safety regulations. Represent management as Quality Management Representative (QMR) or Environmental Management Representative (EMR) in

these systems' implementation and maintenance.

1.12 Promote quality, environmental awareness.

1.13 Manage the activities of the Document Control Center.

1.14 Ensure that all measuring and test equipment are calibrated and in good condition as required.

1.15 Manage the handling of non-conforming products by stopping processes if necessary and ensuring that deficiencies are addressed and corrected before resuming production.

1.16. Assist the Quality Manager in strategic planning and decision-making and Provide input for setting quality objectives and goals.

1.17 Undertake additional tasks or responsibilities as directed by a superior.