JOB SUMMARY:

The Quality Engineer for Mechanical and Piping ensures adherence to project specifications and standards throughout engineering construction activities. The successful candidate will have responsibilities to encompass inspection, managing QA/QC documentation, coordinating meetings, and enforcing HSE regulations. Key tasks involve material verification, conducting audits, and resolving non-conformances.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance with HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related to ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval
• Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional
• Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

JOB SUMMARY:

As a Quality Engineer specializing in Electrical and Instrumentation (E&I), you play a critical role in ensuring the highest standards of quality and compliance across EPC projects. Responsible for overseeing inspection and testing activities related to electrical and instrumentation systems, you will be responsible to ensure adherence to project specifications, codes, and standards. With a focus on safety and precision, you collaborate with project teams, subcontractors, and clients to drive quality assurance throughout all project phases.

RESPONSIBILITIES:

• Always follow all site safety requirements and use of PPE
• Write, modify, review, and implement project related ITP, Procedures, Specification requirements.
• Material Verifications on all incoming outgoing E&IC project related materials and prepare inspection reports.
• Perform specialist inspection surveillance of E&IC fabrication and installation to ensure that contractor carries out the fabrication and assembly work in accordance with the contract specifications, approved drawings and fabrication/erection and test procedures and the defined hazardous area requirements.
• Provide leadership for executing teams on E&IC.
• Perform daily QA/QC monitoring and surveillance.
• To report non-conformance findings.
• Record all defects observed using the Project Completions Management System (Database) electronic punch lists.
• Monitor and check all electrical hazardous area certification related inspection work to assure compliance.
• Proactively advise where work, material or process needs to be revised.
• Use project Completions Management System database, witness, review and survey of electronic E&IC check sheets and to ensure accuracy of information recorded.
• Repair defective works on the spot where possible.
• Closeout punch list items in Completions Management System completed by Contractor/Supplier, etc.
• Witness & conduct various electrical & instrumentation testing.
• Witness & conduct FAT & SAT inspections.
• Witness & conduct PLC Panel, MCC Panel and Electrical Panels FAT
• Final document compilation and submissions.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Authorized to stop contractors’ work where quality is not being achieved.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or retesting.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning, and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops including Instrument Calibration, Control Valve testing, and Material inspections.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Monitoring all installation and inspection of instrumentation work with respective Quality ITPs and Checklist.
• Monitoring and inspection of Loop checking.
• Preparing inspection & test reports of completed inspections & tests.
• Preparation of final quality dossiers / test packs and maintaining backups of completed quality.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality
• Implement, maintain and verify quality system at job site as per company quality procedure and project quality plan.
• Incoming material inspection, review of certification documents and prepare inspection reports.
• Preparation of inspection test plan, review method statements related to instrumentation.
• Inspection of fabrication, installation and commissioning activities for process/electro-mechanical works related to instrumentation.
• Inspection of subcontract works – factory acceptance tests, etc.
• Third party certification of equipment /machinery related to job site.
• Preparation of inspection reports
• Review and compilation of inspection documents for final documentation.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor’s degree/Post Graduate Diploma/Professional
• Degree in Engineering (Electrical, Instrumentation) or equivalent Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Certification/Training in Quality
• A working knowledge of Construction / Electrical / Inspection codes and practices
• The inspector shall have direct knowledge of all aspects of electrical testing such as Insulation, Resistance testing, Current and Voltage testing.
• Have a working knowledge of the National Electric Code/NFPA 70, IEC or equivalent standards.
• Shall be able to inspect complete loop checking, wiring continuity and color coding, start-up, and troubleshooting.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as assigned by your Superior.

JOB SUMMARY:

As a Quality Engineer specializing in Structural aspects, you play a critical role in ensuring the highest standards of quality and compliance across engineering construction projects. Your responsibilities include inspecting structural components, ensuring compliance with project specifications, codes, and standards, and collaborating with project teams to maintain project quality and safety standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related to ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval
• Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional
• Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 10 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

JOB SUMMARY:

The Quality Manager plays a pivotal role in ensuring the highest standards of quality and workmanship across all aspects of engineering construction within Gradiant projects. Responsible for overseeing quality assurance and quality control processes, the Quality Manager ensures compliance with project specifications, applicable codes, standards, and client requirements.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Inspect the job whenever required as per approved procedures, client’s specification, applicable code, standards & approved drawings.
• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating to Mechanical, Piping and Structural discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Ensure quality of inspected items meet project requirement and standard.
• Participate in Construction & technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s representative.
• Ensure HSE requirements are always all in place and ensure compliance to HSE regulations and requirements.
• Ensure that the construction quality is in accordance with the approved Project Quality Plan.
• Read, understand, and implement projects related ITP, Procedures, Specification requirements.
• Review Documents and Drawings as per specification.
• Ensure Material verification against MDR, MIL Cert, etc.
• Verify and ensure cutting plan against actual cutting of material.
• Perform fit-up inspection against drawing/WPS.
• Send daily RFI to client and conduct Quality orientation for piping to PMT/QC/Subcon.
• Perform visual inspection and maintain the reports.
• Ensure inspectors surveillance reports/ inspection reports are in place.
• Ensure outstanding NDE were performed and follow up with NDE team/Contractor.
• Maintain latest drawings and raise NCR if any non-compliance observed.
• NDE % coverage monitoring and maintain the register as per project requirement.
• Attend daily toolbox meeting in time.
• Participating on weekly HSE safety briefing and delivering talk
• Conduct weekly quality walk with client/PMT.
• Review piping pressure test pack and compiling of weld and material summary reports.
• Monitoring and maintaining record of inspection status of piping test packs.
• Co-ordinate with Notifying body for site inspection PED approval Final document compilation and submission and get client acceptance.
• Conduct audits, creating audits, finding reports and determining proper corrective and preventive actions.
• Communication with Client, Vendors and Internal team.
• Material Verifications on all incoming outgoing project related materials.
• Handle and decide on disposition of non-conforming material.
• Able to plan and resolve drawing details and discrepancies.
• Ensure the calibration of measuring tools are up to date.
• Oversee QC activities, ensure the job is delivered on time.
• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for initiating, collecting, dispositioning and retention of QA/QC records in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance, and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops.
• Coordination with clients / third party, in accordance with approved ITP, for agreed witness inspections & tests.
• Submitting weekly report and requested information / statistics to Department QC Supervisor.
• Liaison with QA/QC Manager for all aspects of quality

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least bachelor's degree/Post Graduate Diploma/Professional Degree in Engineering (Chemical), (Mechanical) or equivalent
• Minimum 15 years of relevant working experience in EPC projects with multi discipline.
• Valid certifications such as AWS Certified Welding Inspector or CSWIP 3.1. is preferable.
• Understanding engineering drawings and specification requirements.
• Knowledgeable in QMS, Welding Inspection, Quality Assurance and Quality Control System.
• Understand piping fabrication/installation inspection and testing requirements.
• Familiar with basic conventional NDT methods.
• Computer literate and familiar in using basic Microsoft office programs.
• Good team player and able to work independently.
• Reliable, well-organized and detail oriented.
• Good communication and interpersonal skill
• Excellent organizational and strong verbal and written skills
• Knowledge of Health & Safety requirements
• Carry out other duties as may be assigned from time to time by your Superior.

Main duties and responsibilities:

To support the local team in all QEHS related compliance and performance of TES Singapore sites, which includes but not limited to emergency response (drills and TTX), incident investigation and IH monitoring, etc. Also, includes all Environmental related matters and regulatory reporting, global QEHS procedures & programs and overall lead for all QEHSMS / R2 audits, 3rd party certifications and customer audits as well as supporting Group EHS.

Environment:

• Reporting of QEHS performance metric reporting and activities to Global/ Group EHS Manager.
• Provide guidance on QEHS best practice principles, techniques and culture in Singapore sites.
• Compilation and submission of annual recycling data and other relating environment related info to relevant competent authorities.
• Maintain Basel Permit / Import Approval of all sites, including applications and tracking of movement documents.

Audit:

• Ensure Singapore sites are aware of and complying with Corporate/ Group QEHS policies, standards and programs, and local legislations.
• Program lead for 3rd party (ie. QEHSMS & R2) audits and key customer accounts on QEHS audits, provide resource and preparing Singapore sites with upcoming audits, tracking & reporting of audit results and monitor closure of corrective actions.
• Develop and conduct Singapore sites QEHS Audit program to ensure compliance to EHS regulations and Global EHS standards. Track & report audit results and monitor closure of corrective actions.
• Analyse data from EHS audits (including 3rd party QEHSMS & R2 certification audits and key account QEHS audits) to identify trends and provide feedback and preventative measures.

Other support:

• Support the development & implementation of One TES IMS – global QEHS procedures and programs.
• Monthly tabulation and submission of Basel permits status reporting for Exco meeting.
• Provide coordination and administrative support to QEHSMS & R2 certification program in Singapore.
• Support global initiative programs / activities as assigned.

Job Requirements:

• Diploma / Degree in any Engineering discipline and registered WSHO and FSM.
• Good to have: Qualified industrial first aider, noise monitoring office or any other IH related experience.
• Proficient in English and Mandarin and good report writing skills, familiar with Microsoft office.
• Trained in/ familiar with ISO 14001, ISO 45001, ISO 9001 and Responsible Recycling (R2) or equivalent.
• Experience with handling government agencies and knowledge in license and permit application from agencies such as NEA, MOM, SCDF, PUB and SPF.
• 5-8 years of working experience as in WSH related fields or equivalent in manufacturing / electronic or chemical industries.
• Experience in conducting ISO 9001/ ISO 14001/ ISO 45001/ R2 audits or handling OSH related audits.
• Good communication skills, team player, responsible, take initiatives and work independently without much supervision.

Good to have:

• Registered WSHO & FSM.
• Proficient in English, Mandarin and good report writing skills, familiar with Microsoft office with auditing experience in ISO 14001, ISO 45001 or ISO 9001.
• At least 5-8 years of working experiences as in WSH related fields or equivalent in manufacturing/ electronic or chemical industries.
• Good leadership skills to be able to guide and lead a team of EHS professionals.

As a Quality Assurance (QA) Specialist in the sales and rental of used construction equipment, your role is pivotal in ensuring that every piece of machinery meets the highest standards of performance, safety, and reliability. Here's a breakdown of your key responsibilities:

1. *Quality Assessment*: Your primary task is to thoroughly inspect each piece of used construction equipment before it's put up for sale or rental. This involves conducting comprehensive checks on various components such as engine functionality, hydraulic systems, electrical systems, and structural integrity. Think of yourself as the meticulous inspector, meticulously examining every nook and cranny to ensure optimal functionality.

2. *Documentation and Reporting*: Your role involves meticulous documentation and reporting of inspection findings, ensuring transparency and accountability throughout the process. You'll collaborate closely with workshop managers, mechanics, and electricians to obtain detailed diagnostics reports and checklists for each piece of equipment. These reports serve as a comprehensive record of maintenance and repair history, highlighting any issues addressed and parts replaced. As the QA Specialist, you hold these personnel accountable for the quality and thoroughness of their work, ensuring that all repairs and maintenance tasks are completed to the highest standards. By maintaining detailed documentation and fostering a culture of accountability, you contribute to the overall reliability and trustworthiness of the equipment offered for sale or rental.

3. *Quality Control Procedures*: Implementing and enforcing quality control procedures is vital in maintaining consistency and reliability across all equipment. You'll develop and refine these procedures to streamline the inspection process while ensuring thoroughness and accuracy. Think of it as creating a standardized checklist, ensuring that no aspect of quality assessment is overlooked.

4. *Collaboration with Sales and Rental Teams*: Effective communication and collaboration with the sales and rental teams are key aspects of your role. You'll liaise closely with these teams to provide insights into equipment quality, addressing any concerns or queries they may have. Picture yourself as the bridge between the technical aspects of equipment quality and the customer-facing sales and rental processes.

5. *Customer Satisfaction and Support*: Ensuring customer satisfaction is paramount. You'll offer support to customers by providing detailed information about the equipment's condition and addressing any post-purchase or rental issues promptly. Your expertise and assistance contribute significantly to building trust and fostering long-term relationships with clients. Consider yourself as the reliable point of contact, ready to assist customers at every step of their journey.

6. *Continuous Improvement*: Striving for continuous improvement is ingrained in your role. You'll actively seek feedback from stakeholders, identify areas for enhancement in the inspection process, and propose innovative solutions to optimize efficiency and effectiveness. This ongoing pursuit of excellence ensures that the quality of equipment and service continually evolves to meet and exceed customer expectations.

In summary, as a QA Specialist in the sales and rental of used construction equipment, you play a pivotal role in upholding the highest standards of quality, ensuring customer satisfaction, and driving continuous improvement in processes and procedures. Your attention to detail, technical expertise, and collaborative approach are instrumental in the success of the business.

*Requirements:*

Minimum Diploma in Mechanical / Manufacturing / Quality Management.

Minimum 1 year working experience

Acceptable communication and interpersonal skill and ability to communicate with all levels

Good understanding of technical drawing

Responsibilities:

• Manage the HACCP pre-requisite programs and review periodically their effectiveness in mitigating microbiological contamination risk. Revise as required for continuous improvement.
• Work with Cross functional team for FDA audit preparation.
• Worked with plant team, special cleaning activities eg. sanitation break.
• Establish and manage the pest control programs for the plant, collaborate closely with the Pest Control Service provider.
• Participate in internal HACCP/GMP and Quality audit programs.
• Support in OE/Engineering improvement projects to ensure compliance to food safety and hygiene requirements.
• Support Procurement team to ensure existing and new material suppliers meet our Food Safety and hygiene requirements.
• Support warehouse and third-party warehouse service provider to meet our Food Safety requirements and ensure material storage compliance. Participate in facility audit for cGMP, pest control and hygiene as required.
• Coordinate and facilitate activities to maintain and continuously improve plant hygiene standard.
• Establish and manage the hygiene monitoring program for production, warehouse, utilities and adjoining areas, with established test points, sampling frequency and acceptance criteria.
• Review and revise current plant hygiene zoning policy to mitigate physical and microbial product and chemical contamination risks, personal and material traffic flow, gowning and shoe change policy.
• Provide guidance in directing efforts to improve, maintain, and validate sanitation practices and procedures. Continuously benchmark or seek best practice in plant and equipment cleaning protocols.
• Evaluate and approve cleaning accessories and disinfectants used in sanitation procedures.
• Audit cleaning systems and procedures and recommends correction of unsanitary conditions.
• Define scope of works and establishes standards and measures of cleaning effectiveness for third party janitorial services for the plant.
• Implement plant wide programs and activities as communicated by site management and regional/global quality, through effective and cost-efficient hygiene and sanitation programs to mitigate microbiological risks.
• Initiate alignment discussions with operations manager and project engineers for plant improvements on hygiene engineering concepts. Validates and ensures that new projects comply with basic hygiene engineering standards.
• Monitor equipment, building, and grounds for routine and non-routine maintenance/repair for GMP compliances and hygiene engineering concepts in accord with Global guidelines.
• Facilitate initial training (and refresher training) to plant personnel on cGMP (HACCP), hygiene programs, and sharing of significant microbial and hygiene learning to prevent recurrence.
• Perform other tasks, roles or projects that may be assigned by Assistant manager Plant hygiene & Food safety Provides guidance and maintenance of Food Safety System (HACCP), and to maintain and continuously improve plant hygiene standard through ensuring compliance to food safety and hygiene requirement.
• Provide guidance in directing efforts to improve, maintain, and validate sanitation practices and procedures.

Requirements:

• Minimum Diploma in a scientific or technical discipline (Chemistry, Food Science, Microbiology or related) preferred or with equivalent skills and experience.
• Working experience in a Nutritional GMP manufacturing environment preferred. Experience in manufacturing of infant/ follow-up formula/ pharmaceutical will be of advantage.
• Understands quality systems, HACCP which includes environmental monitoring program, pest management program, sanitation program and other pre-requisite programs.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

ob summary:

Perform checking on incoming materials, finished products, production line. Plan and liaise with relevant departments to execute projects, non routine testing etc. Assist Manager in audits.

Job responsibilities:

• Liaise with relevant department on incoming materials schedule and perform the relevant checking.
• Review COAs to ensure conformity of the raw materials and packaging materials before use
• Conduct production line checking
• Complete finished products checking on time
• Perform microbial checking on the raw materials, packaging materials, water samples from line and finished products.
• Assist in data collection and investigation when non conformance occur.
• Support in non routine testing and project
• Ensure all equipment are calibrated and in good working condition.
• Liaise with testing lab on external testing

Requirements to excel in this position.

• Minimum diploma and degree (Certified in Food Science and Technology or its equivalent)
• Able to work independently or as a team
• Good analytical skills, detailed person
• Good communication and written skills.
• Willing to learn
• Proficient in Microsoft Office

- Able to start work immediately or at short notice would be preferred

We regret that only shortlisted candidates will be contacted.

About the Group:

We are part of the Global Collection Team. We are a very dynamic and fun loving team and good at what we do – collecting money! We also provide support to our internal customers - Sales, Sales Finance, Account Management, Order Management and Customer Service besides our external customers.

You will:

· Ensure customers pay within agreed credit terms timeframe, including customer liaison, conduct detailed research, account reconciliation to resolve disputes.

· Weekly cash forecasting

· Liaise with Sales for sales forecast and to resolve issues, relating to invoices.

· Perform periodic financials analysis and credit reviews.

· Ensure compliance with company policies and procedures.

· Work closely with all levels of customer and internal contacts within the Company.

· Meet performance metrics and participate in Sarbanes-Oxley compliance testing.

· Provide general administrative support as and when necessary.

· Any other ad-hoc duties assigned by manager.

About You:

• A team player with good interpersonal, communication and written skill.

• Analytical, ability to work with data and details.

• Independent, self-motivated, willingness to learn and positive attitude, and must be able to work in fast-paced, demanding environment professionally.

Your Experience Includes:

• Knowledge of SAP.

• Working knowledge of advanced Excel a must.

• Proficient in Microsoft Office applications (Word and Powerpoint).

• Proficient in both English and Chinese.

Location: Seagate Singapore Design Centre, The Shugart (One-North)

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection

Eligibility Criteria

• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Job Description & Requirements

Eligibility Criteria

• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Job Responsibiltes

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection

Job Description & Requirements

• Review the inspection history to summarize the integrity status of the plant equipment and piping systems.
• Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.
• Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan
• Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).
• Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.
• Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.
• Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.
• Provide recommendations and timely updates on equipment degradation problems.
• Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.
• Preparation of final inspection reports with all findings, abnormalities and recommendations.
• Ensure quality of inspected items to meet project requirements and standards.
• Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.
• Read, understand project related ITP, procedures, specification requirements.
• Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.
• Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication
• Knowledge in welding inspection

Eligibility Criteria

• Graduate Engineers with 3-6 years of relevant experience.
• Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.
• Experience in Refinery and Oil & Gas must
• Experience in QA/QC and Knowledge in Non-Destructive Testing methods.
• Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.
• Work Independently and can work in Singapore and other countries.
• Fluent Reading, Speaking and Writing in English.
• Willing to commit 24 months contract/ project completion.
• Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.
• Energetic & Result Orientated.

Roles & Responsibilities:

1. Handle Training Coordination - Schedule seminars,

2. Liaise with learners,trainers and related departments & organisations to ensure programmes run smoothly

3. Provide customer service for all training course-related enquiries - incoming and outgoing

4. Handle Phone inquiries, send replies by email, and phone, attend to walk-in customers

5. Ensure timely response to customers enquires, quotation and training request

6. Call Prospective students to advice about training programs

7. Assist management in day-to-day operations and office administration

8. Manage and grow our presence on social platforms like Facebook, LinkedIn

9. Collaborate with IT and design teams for website enhancements

10. Ensure the website is user-friendly and up-to-date with the latest content.

11. Develop and implement marketing strategies to enhance brand visibility and market penetration.

12. Collaborate with other departments to promote products and services.

13. Analyse market trends and competitors' activities.

14. Provide monthly reports for management review

Requirements:

1. Minimum 1-2 years’ experience in customer support or coordination role is preferred

2. Min. O Level as educational requirement

3. Computer literacy e.g. MS Office (Outlook, Word, Excel, Photoshop, PowerPoint) and/or Google Docs, Sheet.

4. Excellent interpersonal and communication skills.

5. Hands-on and a self-motivated individual, Able to work independently without much supervision

6. Organizational and administrative skills

Quality/System Manager (Location: Batam)

Responsibilities

• Act as the Quality Management Representative of the company.

• Ensure effectiveness and compliance to ISO/IATF/QMS and various regulatory requirements as needed.

• Lead site quality team to drive operation and product quality improvements via data driven metrics.

• Oversee and support supplier quality, SCAR, product inspection, equipment calibration, CAPA, complaint investigation, change control, LMS training, and NPI activities.

• Chair quality management reviews and manage Internal & External audits.

• Support global quality system process integration, harmonization, and simplification. Managing local implementation and changes.

• Escalate and manage any significant events such as safety, product shipping holds due to quality, regulatory, or any compliance issue.

• Lead or support identified special projects and key initiatives as needed.

• Work cross-functionally to achieve Batam/Singapore site objectives.

Requirements

• Min. Degree in Quality Assurance, Manufacturing or equivalent.

• Min. 5 years of experience in Quality Management Systems in the plastic injection moulding or medical device industry for IATF16949, ISO9001, ISO14001 and ISO13485.

• Knowledge of regulatory requirements and standards relevant to manufacturing such as ISO45001/OHSAS18001 and ISO14001

• Strong customer focus with complaint investigation, significant event reporting and CAPA skills.

• Internal Auditor certification.

• Strong data analysis skills and proficiency in electronic data management systems.

• Good understanding of quality management systems and tools such as PPAP, FMEA, and SPC.

• Ability to work independently and collaborate effectively with cross-functional teams.

• Location: Batam, Indonesia.

Responsibilities :

Supplier Quality:

1. Ensure supplier quality programs are in line with customers' requirements for manufacturing, packaging and operational processes.
2. Liaise with suppliers CQE on quality, reports and requirements related issues.
3. Maintain and publish supplier quality data for review with stakeholders on regular basis.
4. Liaise with suppliers for quality discrepancy and follow up the improvement actions from suppliers, and monitoring of incoming SPC.
5. Follow up return-to-vendor material issues and claims together with Purchasing.
6. Work with supply chain to drive Cost-of-Poor-Quality improvements and initiatives: Appraisal, Internal and External Cost.
7. To be lead for supplier quality audits.
8. Work with functional team to define inspection criteria to ensure supplier process capability is effective to meet product requirements.
9. Establish incoming material sampling and inspection plan per customers' requirements.
10. Review the CofA/CofC for incoming material, provide analysis of incoming quality.
11. Work in house and with external lab and/or RM Suppliers to ensure statutory, regulatory and products cleanliness requirements are taken care of and follow-up.
12. Prepare material RoHS, Halogen, REACH, CMRT, Prop65, etc, compliance submissions as needed.
13. Develop, expand and maintain in-house laboratory facility/equipment.
14. Oversee the calibration requirements of measuring and test equipment.
15. Work with QC and technical team to establish the laboratory regime.
16. To carry out the project management or ad-hoc projects as assigned.
17. Ensure compliance to QMS, EHS and L&E procedures in the department.

Responsibilities:

• Visual inspection of incoming raw material, incoming SKU parts, in-process parts and finished goods
• Hardness Testing - Testing of finished goods on Hardness Tester
• First Article Testing & Pressure Testing
• Recording of Data
• Carry out daily maintenance of machines
• Setup, operate and maintain all measuring equipment, gauges and fixtures for making accurate inspection checks
• Perform daily housekeeping and any other duties assigned

Working Hours: Day Shift: 7:45am - 5:00pm (Monday - Thurs); 7:45am - 4:30pm (Friday)

Location: Tuas West MRT

Salary: Basic from $2000 (depending on work experience)

Other Additional Salary: 13th month AWS + Quarterly Production Incentive + OT

Requirements:

• Candidate must possess at least Professional Certificate/NiTEC or equivalent.
• Hardworking; able to carry at least 20 - 30 KG.
• Knowledge in using basic measurement instruments
• Independent and able to work under a fast pace environment

Job Descriptions

1. Guide/Train Quality Control Inspectors

2. Gauge setting for critical thread/groove

3. Conduct First Article Check and outgoing inspections

4. Responsible for all incoming raw material hardness check

5. Responsible for marking all outgoing finished products

6. Issue Dimension Reports for all finished work pieces

7. Inspect finished work pieces according to drawings’ specifications

8. Oil and Gas industry working environment

9. Any other duties maybe assigned as and when it requires

Requirements:

ITE or GCE N Level or equivalent working experience

Job Description & Requirements

• 1. Approve or reject all procedures, specifications, methods, and results
• 2. Approve or reject all raw materials, packaging, materials, labelling and finished product
• 3. Review all production records for accuracy and completeness before approving for distribution
• 4. Establish procedures for revising procedures, formulas, and more
• 5. Approve changes to procedures, formulas, and more
• 6. Ensure that the latest version is being used at all times
• 7. Perform all the required tests to ensure identity, purity, potency and composition, and to ensure that products are not contaminated or adulterated
• 8. Investigation of customer complaints
• 9. Evaluation of new vendors/ materials
• 10. Internal audits to verify compliance to AVA regulations
• 11. Maintaining relationships with vendors and regulatory agencies
• 12. Maintain good personal hygiene as well as high work and safety standards in the workplace
• 13. Any ad-hoc duties as assigned

Qualifications & Skills

• Candidate must possess at least Diploma in Food Science/ Technology or in any field
• At least 1 years of working experience in the related field is required
• Proficient in MS Office (Excel, Powerpoint & Words)
• Strong communication skills
• Excellent time management and organisation
• Able to work in a fast-paced environment and within tight deadlines
• Is a team player with strong work ethics, great initiative with a positive and can-do attitude
• Familiar with HACCP and AVA standards

Working hours: 9am to 6pm Monday to Friday

Location: 10 Chin Bee Drive, level 3, Singapore 619861

Salary: S$2500 - $3200

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Quality Inspector (Jurong East)

off-peak: 5 days - 8am - 5.30pm + evening/ weekend OT

peak season: 2 shifts (12hour rotational shift)

base salary + OT pay + 1 month AWS + company shuttle bus

Focal point for inspection queries and scheduling of inspection activities. Ensures conformance of materials, purchased parts and manufactured parts in alignment with quality control plans, specifications, processes and standards. Adds value by ensuring products and services are delivered in compliance with customer expectations.

Job Responsibilities:

• Unboxing, unwrapping and preparing of items for inspection.
• Execute in process and/or final inspection of materials, purchased parts and manufactured parts to ensure conformance with quality control plan, procedures, documentation and standards.
• Review and ensure manufacturing work orders and associated documentation is completed and processed correctly in a timely and efficient manner.
• Monitor and ensure callibration of equipment, work areas are kept clean and appropriate PPE and best practice lifting practices are adhered to at all times.
• Prioritise inspection activities in alignment with delivery objectives.
• Effectively communicate non conformance issues to engineering / production expedites solutions as necessary to support delivery objectives.
• Attending production meetings.
• Completing of non scheduled urgent inspection tasks within the completions business.

SKILLS & QUALIFICATIONS:

• Comfortable working at Penjuru, Jurong East area. Company shuttle service provided
• Min NDT/ NDE/ SPM/ secondary education level
• 1-2 years' experience in manufacturing facility/ quality inspection/ industrial/ engineering
• Experience in manufacturing workshop processes and controls.
• Competent is reading and understanding engineering drawings, processes and procedures.

Quality Lead/ Supervisor (QAQC)

Location: Penjuru Place (shuttle bus provided)

Monday - Friday 8am - 5.30pm

The Quality Lead/ Supervisor is responsible for ensuring timely and effective implementation of the company's policies, procedures, and standards involved in assuring the quality of manufactured products and customer satisfaction, as well as for conducting quality control activities. The Quality Supervisor strives to ensure the facility adheres to quality licenses, standards and certifications.

A successful candidate will collaborate closely with functional areas such as Manufacturing, Procurement, Mfg. Engineering, Sustaining Engineering, Product Lines, R&M and Geozones regularly as well as presenting to internal teams plans and updates.

Job Responsibilities:

• Supervise and lead 4 Quality Control Inspectors and liaise with internal & external stakeholders.
• Maintain site Quality Management System.
• Update QMS records and maintain all necessary documentation and certificates.
• Responsible for following management of change as processes and procedures are updated as per QMS requirements.
• Perform regular process audits in Manufacturing areas and functional areas, including technical work instructions, processes, procedures, and competence and ensure compliance.
• Generate CARs related to any deficiencies and track them to completion.
• Keep competency records up-to-date.
• Conduct training related to QMS, procedures, WIs, others.
• Actively participate in Contract Reviews.
• Develop customer QCP Plans. Ensure contractual requirements are built into Quality Control plans.
• Actively participate in Pre-Production meetings.
• Coordinate Client visits, and audits and constant communication to demonstrate our commitment and promote the Corporate Quality Management System.
• Drive action trackers to completion, related to customer audits, manufacturing reviews or qualification process.
• Coordinate TPIs per customer QCPs, and per production schedule. Ensure documentation meet requirements.
• Review/release WOs from a Quality point of view.
• CPARs/NCRs/COPQ; monitor performance/trends, data analysis, and evaluate the effectiveness of corrective actions to ensure that the required improvements are sustained. Actively participate in RCA. Monitor/track other Quality KPIs.
• Coordinate with product design engineers and manufacturing engineers the requirements in the quality plans and inspection and test plans to be aligned with their engineering design criteria, production schedules and customer requirements.
• Coordinate quality assurance plans for new PNs/product introductions.
• Review and approval purchased materials/products mill test certificates if it complies with the required company specifications and/or applicable industry standards prior to acceptance and use.
• Ensure quality control inspection and testing activities are performed in accordance with Global MFG QMS, customer QCPs/Inspection matrices, and/or local procedires and work instructions.
• Manage non-conformance process in accordance with Global MFG QMS.
• Identify a minimum of two continuous improvement projects per year to lead and complete with measurable improvement to the business in terms of margin, quality, etc
• Any other delegated responsibilities as instructed by his direct supervisor within the timeframe specified safely and efficiently to meet business requirements, provided the instruction is reasonable and you are capable and deemed competent to fulfil these.

Job Requirements:

• 5 to 8 years of experience with ISO-9001
• Minimum 5 years of experience in QA/QC role in the manufacturing environment
• Excellent written, reading, and oral communication in English
• Computer literate and familiar with Microsoft Office software at a minimum
• Fast learner, results-oriented and independent with strong interpersonal skills
• Possess strong customer service skills, i.e. listening, follow-through, and willingness to help
• Certified Auditor
• Ability to read engineering drawings
• Ability to interpret MTCs (Material Test Certificates) against the Company specifications
• Skilled at data mining (Excel Pivot Tables, other Excel tools)

Preferred

• Lean / Six Sigma experience
• Certified Lead Auditor
• Root Cause Analysis implementation experience
• Power BI dashboards.

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently offer the following position in our office in Singapore which will be on-site.

QUALITY TECHNICIAN, IPM

Overview

To perform incoming inspection of purchased material.

Responsibilities

• Perform independent receiving inspections of raw materials and incoming parts to ensure parts meet quality standards.
• Review material certifications against drawings and purchase order to ensure compliance to specifications.
• Document all inspection and test results appropriately to ensure the integrity of the quality data recording and reporting process.
• Respond timely to requests for engineering assistance and inspections.
• Identify and segregate non-conforming material.
• Re-inspect sorted or reworked material as required.
• Perform First Article Qualification to ensure part compliance.
• Comply and adhere to company Quality Management System and Environment, Health & Safety requirements.
• Perform other tasks assigned by Supervisor.

Your Profile

• ITE, NTC, NITEC with minimum 5 years of relevant working experience or Diploma in related fields with minimum 3 years of relevant working experience.
• Must have experience in using basic measurement instruments and First Article Qualifications
• Preferably have GD&T knowledge

What We Offer

• Equal pay is a given for us.
• Learn all there is about Kaizen, PSP's and Muda as part of our Danaher Business System (DBS) trainings - if you believe in continuous improvement like us.
• We offer a balance between support and autonomy to achieve your own goals in an international environment.

Get More Insight

Learn more about what we do and who we are by watching our company video “We Are Leica”: https://www.youtube.com/watch?v=1zHmalqMXN4

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

1. Approve or reject all procedures, specifications, methods, and results

2. Approve or reject all raw materials, packaging, materials, labelling and finished product

3. Review all production records for accuracy and completeness before approving for distribution

4. Establish procedures for revising procedures, formulas, and more

5. Approve changes to procedures, formulas, and more

6. Ensure that the latest version is being used at all times

7. Perform all the required tests to ensure identity, purity, potency and composition, and to ensure that products are not contaminated or adulterated

8. Investigation of customer complaints

9. Evaluation of new vendors/ materials

10. Internal audits to verify compliance to AVA regulations

11. Maintaining relationships with vendors and regulatory agencies

12. Maintain good personal hygiene as well as high work and safety standards in the workplace

13. Any ad-hoc duties as assigned

Qualifications & Skills

• Candidate must possess at least Diploma in Food Science/Technology or in any field
• At least 1 years of working experience in the related field is required
• Proficient in MS Office (Excel, Powerpoint & Words)
• Strong communication skills
• Excellent time management and organisation
• Able to work in a fast-paced environment and within tight deadlines.
• Is a team player with strong work ethics, great initiative with a positive and can-do attitude.
• Familiar with HACCP and AVA standards

Job Types: Full-time, Permanent, Fresh graduate

Pay: $2,500.00 - $3,000.00 per month

Schedule:

• Monday to Friday

Supplemental pay types:

• 13th month salary