Our client is the largest maritime safety company globally, setting the standard for innovation in design and engineering.

• Establish, maintain, and improve the Quality Management System (QMS) to meet regulatory and Class Approval requirements.
• Lead quality initiatives and promote a quality culture across the company, ensuring continuous performance improvement.
• Coordinate and conduct audits, report outcomes, and ensure corrective actions are implemented effectively.
• Support teams in conducting root cause analysis and incident investigations, and compile reports in accordance with regulatory standards.
• Train employees on QMS processes and ensure clear communication of quality procedures and responsibilities.
• Manage budgets for QMS projects, oversee licensing, and document quality approvals and procedures across allocated sites.

Requirements:

• Bachelor’s Degree in Engineering with ISO 9001: 2015 certification.
• At least of 5 years of experience in Quality Assurance and management in the aviation or marine industries.
• Completion of the CAAS M10/L11/L12 Examination and ability to interpret CMM, including Illustrated Part Listings (IPL).
• Experience collaborating with OEMs for capability expansion and familiarity with Lean, Kaizen, and 5S methodologies.
• Knowledge of relevant quality standards and regulations in the marine, defence, and aviation sectors, along with practical experience in Quality Management Systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Job Responsibilities:

• Inspect and identify all possible forms of hazards in a work environment.
• Inspect work areas regularly to ensure compliance with workplace safety and health requirements.
• Check equipment to ensure it is in working condition and do not pose any environment health hazard to user or the workplace.
• Provide solutions to address any unsafe practices or act at workplace.
• Conduct risk assessments on work site.
• Prepare reports on workplace safety assessments.
• Take charge of all matters related to environmental health such as:

1. Disease-bearing insects and rodents

2. Proper disposal of construction waste

3. Noise, air and dust pollution

4. Earth littering

5. Siltation of drains

6. Food hygiene in workers canteens if any

7. Any other environmental health matters

• Report these conditions/ situations with recommendations on remedial measures to be taken to prevent recurrence

Requirement

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 2 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/Health/Safety or equivalent.
• Candidate who possess high experience will be considered for senior role.

Job Description & Responsibilities:

• Plan audits on clients
• Perform audits on clients
• Follow up on corrective actions to be taken by clients
• Review clients' corrective actions
• Finalize audit reports
• Prepare monthly report
• Conduct certification audits as an external auditor
• Ensure the computer information is kept updated

*On-the-job and external training shall be provided.

Monthly basic salary: $3200 - $4500

Working hours: 8.30am to 6pm, 5 days work week

Location: Serangoon

Job Description

● Working with Process Engineer & Engineering team on QC requirement

● Documenting inspection criteria and quality plan

● Work with QA, Process and Product team on corrective action with quality issue

● Work with Process team on in-process audit and FQC audit

Requirements:

● Minimum Diploma in Manufacturing /Quality Engineering

● At least 1 year of relevant working experience in Electronics Product Manufacturing environment

● Control of Supplier Quality Assurance (SQA)

● Quality control of in-coming, in-process and out-going products

● Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement

● Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

● Able to converse with the China suppliers

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

Our Client, a pharmaceutical MNC, is currently looking for a QC Chemist

Job Description:

• Perform chemical analysis using wet chemistry methods and analytical instrumentations
• Participate in laboratory investigations such as out-of-specification or out of trend investigations
• Timely trending and reporting of abnormal results/ pattern that indicates potential issues with process/ material
• Perform laboratory equipment qualification , equipment calibration and Maintenance
• Liaise with Vendor on equipment repair and troubleshooting
• Review test reports and ensure that all laboratory documents are in a constant state of compliance and inspection readiness
• Develop training materials and deliver technical training to colleagues

Requirements:

• Min Degree in Chemistry or equivalent with at least 2 years of relevant experience in the pharmaceutical / chemical industry.
• Experience in operating laboratory equipment such as HPLC, GC , KF Titrators.
• Working knowledge of cGMP and regulatory requirements related to Quality is an advantage
• 5 days office hours

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: QC Chemist)

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

We are looking for a Test Analyst to be responsible for end to end execution of overall test strategy for our client.

Mandatory Skill Set:

• At least 1 year of experience in web and mobile application testing;
• Prior work experience in banking channel domain;
• Strong understanding the life cycle of both manual and automated testing;
• Familiar with Agile methodology;
• Hands on experience in selenium or Appium;
• Hands on experience in Java and JBehave;
• Experience in Quality Assurance processes and JIRA;
• Excellent communication and stakeholder management skill.

Desired Skill Set:

Knowledge and work experience in Java and VB Scripting

Responsibilities:

• Design, develop, execute, and maintain test scenarios and detailed end to end test cases for the assigned projects relating to the digital platform’s user acceptance testing;
• Able to write test cases in JBehave for agile projects;
• Execute the assigned manual or automation testing, log defects and follow up on defects to ensure timely closure;
• Expert in using testing tools such as JIRA, Confluence etc to execute and maintain project status;
• Knowledge of web and mobile application testing in banking domain, with good time management and keen eye for details to ensure quality and timely output;
• Detect, report and track defects in the application tools and with various stakeholders to ensure proper closure of issues;
• Collaborate with all stakeholders proactive to complete job assigned from clarification to issue closure;
• Good with documentation as constant update to project changes will need to be updated timely.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE's website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

(for SI only) EA Licence No. 07C5639

Responsibilities

• Process Validation: Test manufacturing workflows and processes to identify any gaps or inconsistencies.
  Ensure all procedures are efficient and meet required standards.
  
• Issue Identification: Identify and document any errors or inefficiencies in the processes.
  Provide feedback to improve workflows.
  
• Data Recording :Accurately record test outcomes and observations.
  Maintain detailed documentation for reporting purposes.
  
• Collaboration :Work closely with team members to address findings and implement improvements.
  Support team leaders in refining operational processes.

Requirement

• Min Diploma/Degree in Relevant Field
• The manufacturing Industry will be advantageous

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!

Interested candidates, please submit your resume to [email protected]

Alison Chen

Outsourcing Team

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Our client is a global leader specializing in high-performance cooling systems, gaming peripherals, and PC components.

Role Summary:

We are seeking a Senior Supplier Quality Engineer (SQE) to manage and enhance supplier quality for thermal cooling solutions within the electronics and computing sectors. The role involves collaborating with suppliers to ensure compliance with quality standards, improving processes, and resolving quality-related issues. This position is ideal for individuals passionate about quality assurance, process optimization, and supplier development.

The incumbent will be based in Hanoi, Vietnam as part of the company's expansion plans and setting up of a manufacturing facility in Vietnam.

Key Responsibilities:

• Supplier Quality Assurance: Develop and implement monitoring systems to ensure supplier materials and components consistently meet quality requirements. Address and resolve non-conformance issues.
• Process Optimization: Work with suppliers to enhance their production processes, ensuring improved yield and consistent quality in delivered materials.
• Issue Management: Lead investigations into quality issues, implementing effective corrective and preventive actions to mitigate risks.
• Supplier Audits: Conduct audits to assess suppliers' quality systems, process capabilities, and compliance with industry standards. Drive actionable improvements based on findings.
• Supplier Development: Support suppliers in aligning their quality practices with company and customer expectations, fostering long-term collaboration.
• Team Collaboration: Liaise with design, production, and procurement teams to align on supplier quality expectations and enhance communication across functions.
• Continuous Improvement: Advocate for a culture of quality excellence by collaborating with suppliers to refine their quality management systems and manufacturing practices.

Qualifications:

• Bachelor’s degree or higher in a relevant field.
• Extensive experience in supplier quality engineering, ideally within manufacturing or electronics.
• Strong understanding of quality management systems and standards.
• Proficient in supplier audits, corrective action implementation, and continuous improvement methodologies.
• Certifications such as Six Sigma are advantageous.
• Excellent analytical and negotiation skills.
• Willing to travel frequently and be based in Vietnam

This is an exciting opportunity for quality professionals to work closely with suppliers, ensuring the highest standards of quality in an innovative and fast-paced industry.

Interested applicants, please click on "apply" with your updated resume attached.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Responsibilities:

• To assist to liaise and co-ordinate with LTA, authorities, Consultants and stakeholders.
• To ensure risk assessment and safe working procedure are properly executed on site.
• To conduct daily health, safety and environmental inspections, prepare reports and follow up with Project Safety Team.
• Ensure compliance with environmental regulations, develop environmental control plan & liaise with NEA (such as report submission, etc.).
• Proper documentation of all EHS records, certificates, notice and official related EHS correspondence.

Requirement:

• At least 5 years relevant experience in construction for LTA projects.
• NEA registered ECO.
• Able to work independently with minimal supervision.
• Able to ensure compliance with the latest environmental regulations.

about the company

Our client is a global Financial Institution on the hunt for a Head of Compliance to help champion and drive the compliance programme. You can expect to work in a fast-paced, evolving environment that keeps challenging you.

about the job

• Provide oversight and management of a robust compliance programme, working closely with business and management to ensure the business is operating in accordance with PSA/DPT licensing conditions and requirements
• Act as the designated Compliance Officer and Money Laundering Reporting Officer (MLRO) with MAS, auditors and other regulatory bodies, building strong regulatory relationships championing the adoption of best industry standards
• Work with technology, product, and operations teams to develop policies, procedures and systems (such as KYC, AML, CTF) to create effective monitoring of controls
• Provide sound, coherent and commercially minded advice and compliance support on all matters relating to the organization’s activities
• Advise on the impact of laws and regulations on proposed business activities

skills and experience required

• Degree in Accountancy, Banking, Business or Law, or relevant professional qualification in financial services or audit
• Minimum 10 years of relevant compliance experience with strong knowledge of the Payment Service Act (PSA), prior experience applying and obtaining the license would be highly advantageous
• An entrepreneurial spirit with a strong interest in the cryptocurrencies and blockchain technologies sector

To apply online please use the 'apply' function, alternatively you may contact <Daniella Koh> at <98237297>.
(EA: 94C3609/ <R1655148> )

Responsibilities: (Manual Tester)
1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.

2. Executing Manual Testing using Jira
3. Ensure test runs and results are completed within the given time frame.
4. Develop and execute test plans to validate software functionality against requirements and specifications.
5. Identify, report, and track software defects and issues.
6. Perform functional, performance, security, and regression testing of software products.
7. Report test results and defects to the development team and other stakeholders, and work on their resolution.
8. Provide suggestions and feedback to improve the quality of the software development process across teams.
9. Stay updated with the latest testing tools, techniques, and methodologies.
10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations.

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

Responsibilities:

Products Knowledge and Hands-on Experience

• 3 years direct fund house compliance experience
• Working knowledge of equities and fixed income funds
• Familiar and working experience with UCITS, CPFIS rules
• Experience in setting compliance rules in Portfolio Management System

Secretary of:

• Board Meeting
• Risk Management Committee Meeting

Regulatory, Reporting, Surveys/Questionnaires:

• MAS, MoM Survey / Questionnaires, etc.
• Acting as LO and in change of regulatory and ad-hoc MAS reporting e.g. Form 11
• Fund registration/renewal with Opera and other jurisdictions
• Responding to Queries of Regulators
• Internal Reporting, e.g. monthly report to Board of Directors

Handling of Yearly Audits

• Statutory Audit
• Internal Audit
• ISAE3402 Audit

Monitoring Conflicts of Interest

• Directors’ Business Interest
• Periodic Disclosure to Investors
• Staff Personal Dealing/Declaration

Yearly Routines

• Outsourcing review
• BCP Testing
• Licensing Conditions Review
• Compliance Fit and Proper requirements
• Enterprise-Wide Risk Assessment
• · Updating Risk and Compliance Manuals
• · Identifying Critical IT systems

Onboarding and Periodic Reviews

• Brokers
• Introducers
• Clients

Upkeeping Registers

• Representatives
• Distributors/Introducers
• Outsourcing
• Gifts and Entertainment
• Complaints
• Errors/Exceptions
• Continuing Education
• Suspicious Transaction Reports

Requirements:

• Bachelors/Master’s degree
• 2-4 years’ experience working in a licensed/regulated business
• Past compliance experience is a plus
• Responsible, independent, extremely diligent and detailed
• High stress tolerance

Responsibilities:

Senior Functional Business Analyst to join the AML Uplift program to support QR Management, BAU activities and various new initiatives within bank which undergoing a large transformation change.

1. Accountable for overall project business requirements elicitation

2. Driving business discussions and managing the project scope

3. Senior stakeholder management and leadership updates

4. Support the project delivery phases especially during Analysis and design and test phases.

Requirements:

1. 7-12 years of experience in Banking industry.

2. Experience as a business analyst in leading banks and delivered projects, programs of large scale.

3. Should have good communication skills and capability to drive senior stakeholders with minimal supervision.

4. Should have experience in AML, KYC, compliance domain and data analytics.

5. Experience in AI/ML and workflow applications is good to have.

The Senior QA Lead will oversee the activity of the quality assurance department and staff, developing, implementing and maintaining a system of quality and reliability testing for the organisation’s product and development processes.

Responsibilities

• Oversees the daily workflow and schedules of the department
• Develops, implements and manages processes to ensure that products meet required specifications for quality prior to delivery.
• Communicates quality standards and parameters to QA and Production team.
• Identify and analyses issues, defects and other problems, particularly when problem recur in multiple products; recommend and facilitates solution to these issues
• Review client, customer and user feedback
• Conduct internal reviews and audits based on QMS ISO 9001
• Prepare First-Article reports
• Participate in ISO 9001 internal annual audit
• Perform other ad-hoc duties as assigned by the management team

Requirements

• Excellent verbal and written communication skills
• Good interpersonal and customer service skills
• Attention to details with strong analytical and problem-solving skills
• Proficient with Microsoft Office Suite
• 3 to 5 years of experience in related field with supervisory experience a plus

Education Qualification

Bachelor's Degree or diploma

Working Location: Tuas Link 1

Working Hours: Monday to Friday, 8.30am to 6pm

Job Responsibilities:

• Perform audit procedures during the audit fieldwork under senior guidance.
• Perform analytical review procedures and other substantive audit procedures for clients both based locally and overseas in various industries under supervision.
• Establish good working relationships with clients and engagement team members.
• Handle any other job tasks assigned from time to time.

Job Requirements:

• Degree or professional accounting qualifications recognised by ISCA.
• At least 1 year working experience in audit firm.
• Proficient in computer skills & Ms Office.
• Team player with strong analytical, follow-up skills and time management skills.
• Good communication and interpersonal skills.
• Ability to work within tight timeline and in a fast-paced environment.

• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Requirements:

• Singaporean
• At least Diploma or above
• At least 2 years of relevant customer service, call audit and emailing experience

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

Department Head , Quality Assurance

Job Descriptions

· To lead and manage a team on quality assurance in a fast pace semi-conductor industries.

· To take ownership for technical transfer from Head Office (Japan), new products testing; as well as assisting customers during material evaluation and qualification phases, and provide solutions on technical and quality matters on the products.

· To work closely with Head Office (Japan), including Global Quality Assurance, R&D team, Manufacturing team, Engineering Team, Sales/Marketing and Supplier Chain team in achieving towards customer satisfaction.

1. To work closely, especially with Japanese group customers (necessary to communicate in local Language), in the establishment of suitable material configurations and specification, to meet their expectations and requirements and providing technical support as necessary.
2. To conduct experimental research on properties on products, as well as in-depth failure analysis and testing to facilitate root cause investigation for total improvement

Job Requirement:

- Degree / master in Polymer / Material engineering / Applied Chemistry / Engineering

- Minimum 15 years of relevant work experience in semiconductor industries (with at least 5 years in managerial position), and must be familiar with characteristic of epoxy molding compound for IC encapsulation, epoxy glue for die attachment, lid attachment, sealing.

- Requires detailed knowledge about ;

1) Reliability requirement for power device, automotive semiconductor.

2) Composite material between organic and inorganic.

3) Organic synthesis and adhesion between polymers and metals.

4) Polymer production process especially for Epoxy and Phenolic resin.

5) Metal property especially for silver

6) Rheology for paste material

7) Below equipments:

o DCS (Different Scanning Calorimetry)

o DMA (Dynamic Mechanical Analysis)

o TMA (Thermo-Mechanical Analysis)

o TGA (Thermogravimetric Analysis)

o Viscometer

o Rheometer

o GPC (Gel Permation Chromatography)

o SEM (Scanning Electron Microscope)

o Printing Machine

o Dispensing Machine

o Die Bonding Machine

o Wire Bonding Machine

- Familiar with Japanese Patent system

- Familiar with materials and custom regulations in respective countries, such as Japan (Japan (CSCL) , USA (TSCA), EU (EINECS,REACH), Korea (ECL) , Philippines (PICCSS), China (IECSC), Taiwan(ECN).

- Industrial experiences in failure analysis (FA or polymer science and semiconductor material composition) is necessary).

JOB SUMMARY

• The CFCC Control Room owns the Group Transactional Conflicts and Information Walls Standard (TCIW), Group Personal Account Dealing Standard (PAD), Group Outside Business Activities Standard (OBA), Group Close Financial Relationships Standard (CFR) and External Employee Connections Standard (EEC) which set out procedures for transactional conflicts clearance and employee declarations required to help the Group manage any actual, potential or perceived areas of conflicts of interest that may arise in the course of providing financial services to its Clients.

RESPONSIBILITIES

• Responsible for assisting the Head of Control Room, Asia, to oversee CFCC Control Room matters affecting the region (ASA and GCNA)
• Managing and acting as the first point of escalation for a team of CFCC Control Room analysts located in Singapore and Kuala Lumpur (“Asia Control Room”).
• Playing a leading role in coordinating with CFCC Control Room colleagues globally located in London and working closely with other CFCC colleagues globally including the Private Side advisory teams. Ensure that Asia regulatory and business requirements are reflected in global procedures, policies, processes and that the appropriate standards are adopted.
• Participating as an active member of the Control Room Leadership Team and helping with the overall management of the CFCC Control Room team globally.

Primary areas of responsibility include managing and performing the following core functions owned by the CFCC Control Room:

• Clearing and managing transactional conflicts of interest and acting as the first point of escalation for the Asia Control Room
• Maintaining of the Group’s Watch and Restricted Lists
• Tracking transaction flows and timetables, pipelines and inside information held by various businesses and functions within the Group
• Managing the Group’s Information Walls, including executing wall crossings where appropriate
• Performing of preclearance review for research publications to ensure compliance with legal and regulatory obligations
• Maintaining of research disclosures
• Ensuring control sample testing is developed, maintained and completed in a timely manner within the Operational Risk Framework
• Providing training to CR analysts in line with the team’s DOIs, ensuring that each analyst receives the required training and is adequately equipped to ensuring that the DOIs capture the workflow of the teams accurately and in sufficient detail
• Reviewing escalations of preclearance requests of staff relating to clearing Outside Business Activities, Personal Account Dealing, Close Financial Relationships and Employee External Connections
• Reviewing and advising on escalations relating to potential breaches of the Standards owned by the CFCC Control Room.

Strategy

• Support and implement the vision, strategy, direction and leadership for CFCC for Global Credit Markets and other businesses, consistent with the vision and strategy for the CFCC function and in support of the Bank’s strategic direction and growth aspirations.
• Promote the culture and practice of compliance with compliance standards (including conducting business within regulatory requirements, and to high ethical standards) within the Bank and embed a Here for good culture and the Group Code of Conduct

Business

• Build and maintain an effective and constructive relationship with all key business and functional stakeholders that is based on trust, capability, and integrity, providing timely, responsive and quality regulatory compliance advice and guidance to enable the business and functions to meet/ achieve their strategic tactical objectives.
• Provide robust challenge to all relevant business stakeholders where activities are outside of the risk tolerance / appetite, escalating as necessary, until appropriate oversight and ownership is achieved including actions and plans to address any remedial action needed to come back within risk tolerance / appetite.
• Work closely with the business to provide timely compliance advice to ensure compliance with all relevant laws and regulations and policies and standards, support the transition to proactive and preemptive compliance and conduct risk mitigation.

Processes

• Establish and maintain effective processes (including training, advice and support) to ensure that policies, procedures and standards to address compliance risks (excluding financial crime) are effectively implemented and adhered to across Global Credit Markets and other businesses.
• Provide support and challenge to the Bank’s senior management to ensure that they establish and monitor appropriate processes for compliance with compliance policies, procedures and standards (including meeting regulatory obligations and maintaining high standards of conduct).

People & Talent

• Good presentation skills, data analysis, analytical skills and data reporting.
• Good communication skills (written and verbal) and interpersonal skills with an ability to interact with all levels of management and staff.
• Ability to prioritize, multitask, work under pressure and handle confidential and sensitive information in a professional manner in a fast paced deadline driven environment
• Drive performance in compliance service delivery with highest quality of service.
• Assist Process Owner to establish, govern & maintain work processes to drive service performance

Risk Management

• Ensure effective management of compliance matters, and in collaboration with the rest of the CFCC team, effectively manage regulatory issues that have a significant impact on the Bank.
• Collaborate with the other Products CFCC teams and the Compliance Management Group to anticipate horizon risks that may have a significant impact on the Bank and develop effective strategies to mitigate such horizon risks including global standards for conduct of business.
• In the event of serious regulatory breaches, or where risk tolerances have been breached, ensure senior management in the Bank and relevant regulators are informed and that actions are taken quickly to remediate and/or activities are ceased. Ensure proactive and timely identification, assessment, advice and dissemination of evolving regulatory changes/practices and associated risks, and proactive engagement in regulatory reform.
• Assist and work closely with Shared Investigative Services (SIS) and Surveillance and Monitoring teams in relation to investigations and breaches concerning the relevant businesses.
• Ensure global standards are understood and implemented, with any identified exceptions, or need for more/less stringent standards escalated to senior CFCC Compliance Management for joint decisionmaking.
• Maintain adequate management MI / trackers across all aspects of their coverage and responsibility to ensure all issues and matters are tracked, followed, regularly assessed and reported on.

Governance

• Within the Group's overall Risk Management Framework, establish and maintain appropriate risk based compliance frameworks for identifying, assessing, managing, monitoring, mitigating and reporting compliance (including regulatory and financial crime) risks across the relevant businesses.
• Help to Develop and assist in recommendation (for approval by the relevant Risk Committee), appropriate compliance policies and procedures.
• Ensure appropriate product governance measures are in place so that product approval documents reflect all relevant regulatory requirements.

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance matters

Key Stakeholders

• Global Credit Markets business teams including Financing Solutions, Financing Risk, Leveraged and Acquisition Finance (LAF) and Capital Markets
• Mergers & Acquisitions business team
• Legal teams for the above businesses
• CIB Client Coverage
• Credit and Portfolio Management
• Group Corporate Development and Strategy
• SC Ventures
• Group Internal Audit

​​​​​​​Other Responsibilities

• Embed Here for good and Group’s brand and values in Global Credit Markets and other business teams.
• Perform other responsibilities assigned under Group, Country, Business or Functional policies and procedures.

Our Ideal Candidate

• 7+ years of work experience in the financial industry, preferably in compliance or other risk and control functions or in transaction related roles in the Control Room
• Banking knowledge in terms of customers, products, transactions and operations
• Excellent communication skill both articulation and writing
• Good attention to detail and ability to prioritize, multitask, work under pressure and handle confidential and sensitive information in a professional manner in a fast paced deadline driven environment
• Data & analysis skills: able to manage data exceptions and analyse trends and out of pattern activities, working knowledge of the Internet and MS Office Suite & independently assimilate, analyse, and evaluate information from disperse data sources to determine a course of action (e.g. case closure or escalation), and record and communicate this decision clearly and concisely.

Role Specific Technical Competencies

• Manage Risk
• Manage People
• Compliance Policies and Standards
• Compliance Advisory
• Investigations
• Manage Change

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

· Maintain and upkeep AS 9100 and ISO 45001 requirements and procedures

· Conduct Internal Quality/ Process Audit and attend to external audit needs.

· Manage/ Perform and fulfil customer quality requirements includes document and reports submission.

· Manage First Article requirements which includes CMM programming.

· Quality Methodology – Training Material or past Stimulated Results will be used.

· Prepare and submission of Quality KPI.

· other duties assigned by the superior

Job Requirements:

· Min Diploma in Mechanical or equivalent

· Able to work independently.

· Knowledge in AS9100

· Good knowledge in Engineering Drawing Interpretation and GDT.

· Experience in CMM operations will be advantage added.