Job Description:

• Conduct sampling and perform routine/non-routine microbial & chemical analyses such as purified water, raw materials, bulk products, finished products, and stability samples in accordance with approved procedures.
• Prepare laboratory reagents, microbiological culture media, media agar plates, sterilization of apparatus, and decontamination of microbiological waste.
• Carry out environmental monitoring activities (viable and non-viable airborne particulate contamination monitoring and microbial swab test).
• Assist in Microbial Limit Test (MLT), Antimicrobial Efficacy Testing (AET), Growth Promotion Test (GPT), Gram staining, microscopy, and microbe identification testing in accordance with established international standards.
• Assist in purified water system performance verification, production cleaning, sanitization validation, new product introduction, and continuous improvement initiatives.
• Document all results in accordance with Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP) requirements.
• Participate in out-of-specification and deviation investigations and recommend corrective actions.
• Maintains a high level of good housekeeping including ensuring all glassware, apparatus, and testing equipment are cleaned promptly once the analysis is complete.
• Participate in internal assessment and audit as required.
• Any other duties and responsibilities as assigned by the supervisor.

Requirements:

• Diploma in Microbiology, Biochemistry, or related discipline.
• Minimum 2 years of experience in cosmetics, food, nutritional personal care, medical devices, or pharmaceutical quality control laboratory.
• Knowledge of Good Manufacturing Practices or Good Laboratory Practices.
• Candidates with exposure to Halal, ISO 17025, or ISO 22716 will be an added advantage.
• Fluent in both oral and written English.
• Good communication and interpersonal skills.
• Systematic and able to work under pressure.
• Mature, proactive, attention to detail, well organized, analytical thinking, and quality minded.
• Meticulous and able to follow through with tasks promptly.
• Able to work independently as well as in a team.

Regulatory Affairs and Quality Assurance Intern

We're seeking a detail-oriented and organized individual to support our Regulatory Affairs and Quality Assurance (RAQA) team.

We are looking for an intern who can begin in May/Jun 2025, and can commit for at least 4 months.

Key Responsibilities

- Maintain and update regulatory documentation and records for submissions

- Ensure regulatory databases are current and compliant with regulatory requirements

- Compile and maintain post-market vigilance documentation

- Assist in CAPA investigations for customer complaints, non-compliance, and audit findings

- Implement corrective actions as needed

- Maintain QMS documentation and records

- Provide support for ad-hoc tasks and projects

Ideal Candidate

- Open to uni undergrad students from all faculties

- Strong interest in regulatory affairs and quality assurance

- Ability to work in a detail-oriented and organized manner

If you're eager to learn and contribute to our RAQA team, we encourage you to apply!

Company overview
Nomura is a global financial services group with an integrated network spanning over 30 countries and regions. By connecting markets East & West, Nomura services the needs of individuals, institutions, corporates and governments through its three business divisions: Retail, Wholesale (Global Markets and Investment Banking), and Investment Management. Founded in 1925, the firm is built on a tradition of disciplined entrepreneurship, serving clients with creative solutions and considered thought leadership. For further information about Nomura, visit www.nomura.com.

Department overview:
The GCIO function oversees group-wide technology, operations and our data office. Our purpose is to support Nomura’s business strategy and deliver consistent group-wide services based on common operating principles. We are aligned to our key businesses across the group and operate enterprise-wide functions for risk management, governance and controls, supply chain and infrastructure.

The Chief Controls Office (CCO) is a key function within GCIO and our purpose is aligned to the GCIO Strengthen & Protect strategic pillar. We are a global team focused on strengthening our non-financial risk management framework enabling the business to accelerate strategic delivery, whilst enhancing our ability to dynamically manage risks and evidence that we are operating in control.

The CCO function is on a multi-year global transformation journey which starts with building the right foundations especially the right skills and capabilities within our global team.

Role description:
This is an associate role, offering great potential for involvement across Group CIO - IT Business units, and within our Chief Controls Office team globally – as well as interfacing closely with the Operational Risk department, Legal, Compliance, Regulatory Affairs, Vendor Management, Internal and External Audit.

If you are looking for an opportunity to be at the heart of the Technology risk management, leveraging your hands-on experience in Chief Controls Office or Risk management role, and sound knowledge of risk and controls principles, this may be an ideal opportunity for you. You will work with our IT Business Units and Group CIO senior management to fully understand and actively manage the Firm’s Technology risk profile. In your risk management oversight role, you will be able to navigate a landscape of competing priorities – understanding where to strike the balance between managing risks and acknowledging or accepting certain risks. In this capacity you will be advising Technology management and team on those matters requiring their attention and those which are of lesser importance.

You will be a Risk & Control lead within the team and you will need to leverage your leadership and influencing skills to continue to develop a strong working relationship across our Technology teams globally and Business stakeholders.

Key areas of oversight and engagement:

• Partner, advise, and support stakeholders across Group CIO implement and deliver an effective control environment and proactively manage their key risks within appetite
• Support the definition, creation and implementation of key artefacts and documents (policies, standards, controls, risk appetite statements)
• Ensure the firm’s Operational Risk Management Framework, including the Firm’s Risk Management Enhancement Programme (RMEP), is demonstrably embedded with the Group CIO and that Management Information (MI) is available to verify embedment
• Conduct controls testing and advise where control enhancements are required
• Oversee the annual Internal and External audits of Group CIO
• Participate in the firm’s risk management forums and committees as necessary, e.g. Operational Risk Management Forum, Technology Governance Forum etc.
• Liaise with the second and third lines of defence to ensuring that their requirements are taken into account within the Group CIO risk management framework
• Assess and advise on the risk management requirement for new and emerging technologies, e.g., Cloud, Secure by Design, AI.

Skills, experience, qualifications and knowledge required:

• Bachelor’s degree of Information Technology, Compliance, Risk and Control or relevant qualification
• Minimum 5 years of relevant risk & control experience within Investment Banking, Audit and consulting firm, or related environment.
• Industry Knowledge of Non-Financial Risk (NFR) frameworks and regulatory compliance requirements.
• Effective communication skills with strong adaptability and attention to details
• Able to think laterally and is comfortable with negotiating, possess an ability to seek buy in from key stakeholders
• Possess strong analytical skills and an ability to quickly learn new products and systems, need to be able to thrive in a constantly changing environment
• Strong experience of managing stakeholder across the 3 Lines of Defence (LOD) will be an advantage
• Proven experience as a trusted advisor to senior management on NFR framework matters, providing guidance and oversight will be an advantage
• Audit, Governance, Security industry certification such as CISA, CISM, CRISC, CISSP, CPA, CMIIA or equivalent professional qualification

Diversity Statement

Nomura is committed to an employment policy of equal opportunities, and is fundamentally opposed to any less favourable treatment accorded to existing or potential members of staff on the grounds of race, creed, colour, nationality, disability, marital status, pregnancy, gender or sexual orientation.

DISCLAIMER: This Job Description is for reference only, and whilst this is intended to be an accurate reflection of the current job, it is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with the job. The management reserves the right to revise the job and may, at his or her discretion, assign or reassign duties and responsibilities to this job at any time.

Nomura is an Equal Opportunity Employer

SFID: 8682

Key Responsibilities

• Conduct Internal and External Audits: Plan, execute, and report on external audits to ensure compliance with industry standards and regulations.
• Testing: Ensures product testing incoming and finished product to established standards/procedures; Certify, File and control in-house and third party certificates very accurately.
• Filing of all certificates and paperwork both hard and soft copies.
• Maintain complete history of client products in use.
• Liaise with third party surveyors on testing and certifications wherever necessary.
• Review work procedures and method statements for compliance with good work practices.
• Ensure compliance with all safety regulations when carrying out inspections.
• Shift and ‘on-call' work may be required, particularly where manufacturing equipment is in continual 24-hour operation.

Job Requirements

• Diploma in Engineering or its equivalent
• At least 3 to 4 years’ related work experience testing, QA / QC and document control.
• Working experience of ISO 9001
• Understanding of engineering and processes.
• Previous laboratory and tensile testing experience advantageous.
• Physically fit able to carry some parts.
• Good problem solving skills.
• Strong math including standard/units of measurement calculations
• Sense of initiative and able to work under minimal supervision or ability to work as a team.
• Working knowledge of machines, equipment, and processes.
• Resourceful and proactive; ability to work in a fast-paced environment
• Attention to Detail: Exceptional attention to detail and accuracy in all tasks.
• Analytical Skills: Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills.
• Ability to work effectively both independently and as part of a team.

1. Job Requirements

A. Educational Qualification and Experience

• Diploma / Degree in Engineering or its equivalent
• 3 to 4 years’ related work experience testing, QA / QC and document control.
• Working experience of ISO 9001
• Understanding of engineering and processes.
• Previous laboratory and tensile testing experience advantageous.

B. Skills and Abilities

• Physically fit able to carry some parts.
• Good problem solving skills.
• Strong math including standard/units of measurement calculations
• Sense of initiative and able to work under minimal supervision or ability to work as a team.
• Working knowledge of machines, equipment, and processes.
• Resourceful and proactive; ability to work in a fast-paced environment
• Attention to Detail: Exceptional attention to detail and accuracy in all tasks.
• Analytical Skills: Strong analytical and problem-solving skills.
• Communication: Excellent written and verbal communication skills.
• Teamwork: Ability to work effectively both independently and as part of a team.

2. Key Responsibilities

• Conduct Internal and External Audits: Plan, execute, and report on external audits to ensure compliance with industry standards and regulations.
• Testing: Ensures product testing incoming and finished product to established standards/procedures;
• Certify, File and control in-house and third party certificates very accurately.
• Filing of all certificates and paperwork both hard and soft copies.
• Maintain complete history of client products in use.
• Liaise with third party surveyors on testing and certifications wherever necessary.
• Review work procedures and method statements for compliance with good work practices.
• Ensure compliance with all safety regulations when carrying out inspections.

This is a traineeship program that will offer an opportunity for ITE or Diploma fresh graduates to obtain knowledge from structured training and OJT to gain work experience that will accelerate their technical competency and career progression in GE Aerospace.

The trainee will perform visual and dimensional inspection to written quality plans on incoming in-process and finished engine components. 

Essential Responsibilities:

• Ensure quality of parts meet specification requirements
• Ensure proper work clearance, correctness, and completeness
• Prevent non-conforming parts from proceeding to the next work station
• Provide support to Manufacturing Engineers and Quality System Engineers for evaluations, audits related activities
• Collect data, feedback on the quality of parts inspected to the Manufacturing Engineers and Quality System Engineers
• Perform visual & dimensional inspections, and set area management of the parts
• Perform scheduled maintenance & housekeeping task

Qualifications/Requirements:

• Nitec/Higher Nitec in Automation Engineering / Aircraft Engines Maintenance / Mechanical Engineering / Mechatronics Engineering / Aircraft Maintenance Engineering
• Diploma in Aerospace Engineering / Mechatronics / Aeronautical Engineering / Aerospace Technology / Aerospace Avionics
• Any relevant Nitec / Higher Nitec / Diploma engineering courses
• Able to read & write English at a professional working proficiency level
• Able to work rotating shifts
• Computer literacy in Microsoft Office
• Willing to accept a 1-year bond after the program
• Within 3 years of graduation OR the operationally ready date (ORD) for national servicemen
• Singaporean/Singapore PR only in order to meet Singapore government requirements for a strong Singapore core and for the Singapore government grants to be applicable.

Desired Characteristics:

• A team player
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• Working Location: Tuas, Singapore (Company Transport Provided)
• Working Days: Monday - Friday
• Working Hours: 8.15 am - 5.45pm
• No Experience Welcome – Training will be provided

Job Responsibilities:

• Inspect outgoing and incoming parts per the inspection procedure and specifications, including incoming process checks.
• Authorise the rejection of parts if found unsatisfactory.
• Authorise the release of conforming parts for storage and customer delivery.
• Conduct routine tests and checks on switchboards completed in the workshop.
• Test and commission switchboards on vessels or on-site to meet customer satisfaction, and address warranty claims or quality complaints.
• Maintain good housekeeping in the QA department.
• Identify issues and suggest or implement solutions to problem detected.
• Follow Quality Management System procedures for effective implementation and control
• Other ad hoc duties as assigned by superior.

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• COLLECT, ANALYZE, AND ENRICH INTERNAL AND EXTERNAL SOURCES OF ANTI-FINANCIAL CRIME (AFC) INTELLIGENCE, INCLUDING BUT NOT LIMITED TO INFORMATION FROM COMPETENT AUTHORITIES, TYPOLOGY REPORTS BY REPUTABLE GOVERNMENTAL/NON-GOVERNMENTAL BODIES, AND THE BANK’S INTERNAL AFC SURVEILLANCE SOURCES/SYSTEMS/MODELS.

• CONDUCT STRATEGIC ANALYSIS TO IDENTIFY MONEY LAUNDERING, TERRORIST FINANCING AND OTHER EMERGING FINANCIAL CRIME TRENDS OR PATTERNS THAT MAY HAVE AN IMPACT TO THE BANK; AND CONDUCT OPERATIONAL ANALYSIS TO IDENTIFY SPECIFIC ENTITIES OR NETWORKS THAT MAY POSE FINANCIAL CRIME RISKS TO THE BANK.

• Provide timely and concise updates to relevant stakeholders on the outcomes of strategic/operational analyses, including the assessment of the financial crime risks, its potential impact to the Bank and the possible risk management actions

Skills/Requirement

• At least 2 years of experience in an investigative or intelligence related anti-financial crime (AFC) role in a financial institution, law enforcement agency or similar fields where investigative/research skills and approaches are employed.

• Able to conduct sound research to gather relevant information from various sources, and apply suitable analytical skills to discover insights, draw conclusions and provide appropriate recommendations.

• Able to appreciate how financial crime-related developments locally and internationally may have an impact to the Bank.

• Proficiency with online research tools/databases and data analytics tools.

• Knowledge of how data analytics can be deployed in the AFC intelligence space.

• Strong sense of integrity, self-driven, inquisitive, and resourceful.

• Strong interpersonal, communication and presentation skills.

• Strong project management skills

• Diploma / Degree in Finance, Business or any related field

• Certified Anti-Money Laundering Specialist (CAMS) or a Diploma in AML with International Compliance Association will be advantageous.

•

− Implementation of medium to large scale Biometric (.NET Framework) projects in the business domain of Public Security with emphasis on IT Security & Biometric Control;

− Conduct formal release tests and/or regression tests;

− Prepare test plans/cases, scripts and project related test deliverables;

− Generate test data to test each software or hardware component according to the quality criteria and business requirement;

− Design and develop automated testing procedures or scripts and keep them up-to-date;

− Ensure quality and accuracy is maintained throughout the software test life cycle;

− Enable timely delivery of the software or hardware release according to project schedule;

− Provide timely progress status update for Internal SIT and UAT, and onsite UAT;

− Ability to understand and adapt to relevant technologies and products; and

− Ability to work with team members to troubleshoot any problems with systems in production.

Requirements:

− Diploma/Bachelor Degree in Computer Engineering/Science or IT related course;

− Minimum 2-3 years functional, scenario and performance testing experience;

− Experience in Oracle and Microsoft SQL Server Databases;

− Experience in Katalon and knowledge in SeleniumHQ and HP Load Runner will be advantageous.

Job Description & Requirements

1. Support in inspection with CMM, i-Vision.

- FA Inspection

- First piece set up inspection

- Routine inspection (in-coming, in-process, out-going)

2. Fixture inspection (New fixture) to ensure acceptable usage.

- Inspection fixture

3. Support in CAPA/Root Cause Analysis for both internal and external quality issue.

- Data collection

- Data analysis

- Root Cause identification

- Solution establishment

4. Generate internal and supplier quality performance report.

- Monitoring of internal production quality issue

- Monitoring of sub-con/supplier quality issue

- Review, analyse and evaluate data on the above quality issue

5. Lead MRB review and disposition.

- Perform review on the rejection, evaluate and disposition of rework, scrap or UAI

6. Participate in supplier evaluation and qualification.

- General supplier management

- Supplier audit (new and existing supplier)

7. Support in audit (internal and supplier).

- Perform auditor role during internal audit

- Auditing of major supplier with high quality issue

8. Lead in internal calibration management.

- Keep track on the calibration due date and take initiative to recall for calibration

- Maintain internal IMTE to date

9. Support on Documentation Control.

- Inspection report

- Material Certificate

- Treatment COC

- Internal inspection record

- Perform GDP

10. Oversee quality activities and action plan.

- Arrangement of inspection priority

- Updating of inspection status

- Liaise with cross function on quality issue

- Problem solving through team work

11. Support QM to lead the Quality Department.

- Perform as a lead of Quality Department

- Take over the HOD role in the absent of QM

Further scope will be added as per necessary prior to changes of needs with reference of current capabilities, knowledge, skill and performance.

12. AS9100, ISO14001 capability.

- Understand all clauses of international standard.

- Execution of these international standard.

- Maintenance of organisation QMSJob Description & Requirements

13. Able to be outstation in Southeast Asia if required

Job Opportunity: 12-Month QC Analyst

Company: Tuas MNC (pick up Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun)

Contract Duration: 12 months

Salary:

Up to $3,200 per month

Additional $250 transport allowance

Key Responsibilities:

Perform Quality Control (QC) testing on pharmaceutical products and raw materials.

Ensure adherence to established Standard Operating Procedures (SOPs) and Good Manufacturing Practices (GMPs).

Conduct chemical, physical, or microbiological testing using validated methods.

Accurately document test results and maintain proper records in compliance with regulatory standards.

Troubleshoot and resolve any issues during the testing process.

Participate in investigations and root cause analysis for quality deviations.

Collaborate with cross-functional teams to ensure timely release of materials and products.

How to Apply: send your resume to: [email protected] or telegram @jocelynchan ASAP!

Jocelyn Chan| Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence number : 99C4599 Personnel EA License: R1331820

Company Overview
Nomura is an Asia-headquartered financial services group with an integrated global network spanning over 30 countries. By connecting markets East & West, Nomura services the needs of individuals, institutions, corporates and governments through its four business divisions: Retail, Asset Management, Wholesale (Global Markets and Investment Banking) and Merchant Banking. Founded in 1925, the firm is built on a tradition of disciplined entrepreneurship, serving clients with creative solutions, and considered thought leadership. For further information about Nomura, visit www.nomura.com.

Department Overview:
Nomura operates in a complex regulatory environment and the role of Compliance department is to ensure that the Firm operates in accordance with the applicable laws and regulations of the exchanges and regulators. Compliance department also works with all levels of the Firm to assist in the development and maintenance of a strong compliance culture and to support the embedding of appropriate behaviours within the firm’s operating practices. Compliance department provides cover for each of the main businesses – Global Markets, International Wealth Management (“IWM”) and Investment Banking/Research, in which Financial Crime Compliance team ensures the effective implementation of the Anti-Money Laundering (“AML”) and Counter Financing of Terrorism (“CFT”) Compliance regime in Nomura for its non-Japan Asia Pacific offices.

Role description:
Financial Crime Compliance Associate will be based in Nomura’s Singapore office and reports to the Head of IWM Financial Crime Compliance, AEJ.

Key responsibilities include:

Reviewing and analysing due diligence information on new and existing clients in order to meet all regulatory requirements.

• Analyse challenging or high-risk account opening situations and to make appropriate recommendations to Business whether to on board a client or maintain an existing relationship and other suitable recommendations as to appropriate controls to be put in place.
• Liaise with the salespersons and relevant stakeholders on account opening-related and KYC queries.
• Conduct enhanced due diligence and liaise with external investigative firms on investigation reports.
• Assess the background and rationale of client transactions with 3rd parties for potential financial crime risks.
• Support the FCC function in ad hoc projects.

Skills, experience, qualifications and knowledge required:

• University level Degree preferably in a relevant discipline (Finance, Accounting, Business, Legal)
• At least 3-5 years’ experience related AML / KYC due diligence experience for high-net-worth clients and complex financial structures (such as trusts, personal investment vehicles, foundations etc.)
• Good understanding of relevant AML/CFT/laws and regulations.
• Ability to communicate clearly and confidentially; able to influence internal and external stakeholders.
• Good team player, proactive and able to adapt quickly

Diversity Statement

Nomura is committed to an employment policy of equal opportunities and is fundamentally opposed to any less favourable treatment accorded to existing or potential members of staff on the grounds of race, creed, colour, nationality, disability, marital status, pregnancy, gender, or sexual orientation.

DISCLAIMER: This Job Description is for reference only, and whilst this is intended to be an accurate reflection of the current job, it is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with the job. The management reserves the right to revise the job and may, at his or her discretion, assign or reassign duties and responsibilities to this job at any time.

Nomura is an Equal Opportunity Employer

SFID: 8698

• Carry out incident investigation, VDR analysis, on board audits / inspections and training as assigned.
• Assist the company with business development, where possible.
• Perform duties of Training Faculty when required.
• Visit and assess vessels for compliance with owners / managers requirements, industry regulations and best practices.
• Under the direction of the General Manager / Team Lead, ensure all assigned jobs are delivered in line with its expectations and ensure quality standards are uniformly maintained.
• Keep up to date with national, regional, and international legislative requirements and practices to support company compliance with all relevant regulations.
• Perform tasks as per the deliverables agreed with the client.
• Interface with vessel operators to ensure vessel performance standards.

Today, Lonza is one of the world’s largest healthcare manufacturing organizations operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Key responsibilities:

• Perform system and routine maintenance activities, including but not limited to user access management, system monitoring, software configuration, backup and recovery for control systems and networks.
• Provide support to resolve control system-related issues and failures by fixing and solving them, and engage with system vendors as required.
• Identify performance and security gaps to ensure computerized system integrity and proactively seeks out improvements and solutions.
• Oversight of control system policies and procedures to ensure alignment with current regulatory requirements.
• Provide office as well as after-office hours support (based on on-call rotation) to ensure smooth operation of the control systems supporting GMP production.
• Provide assistance to Engineering Support Team, Manufacturing, MSAT department where multi-functional support is needed to address and find root causes.
• Own and perform TrackWise deviation investigations and write-up on control system failures/errors; deviation trend review and root cause analysis as required per Lonza Quality requirements.
• Own change controls to plan and implement changes within stipulated timelines, meeting GDP and GMP requirements.
• Support control systems Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT) and other site qualification activities as needed.
• You should be familiar with 21 CFR Part 11 and EU Annex 11 requirements. Also, you need to know about data integrity requirements and expectations. Additionally, you should be aware of common industry practices related to GMP computerized system administration and management.
• Support the team to ensure inspection readiness at all times.
• Perform periodic reviews with respect to user authorizations and system audit trails.
• Support Data Owners in data audit trail reviews in terms of electronic data retrieval.
• Any other duties as assigned by Supervisor / Manager.

Key requirements:

• Degree or Diploma in Computer Science, Engineering, Information Systems or a related field.
• Relevant work experience in the design, implementation and/or support of instrumentation and control systems, preferably in the Bio-Pharmaceutical, Pharmaceutical, F&B industry.
• Experience with distributed control system, software development methodologies and automated system life cycle support in a regulated industry.
• Experience with various Windows operating systems, server architecture and control system-related infrastructure fundamentals.
• Proficiency in implementing standard methodologies for automation design and code development.
• Good understanding of cGMP’s requirements particularly as they relate to the operation, validation and maintenance of computer-controlled systems.
• Strong problem-solving and analytical skills.
• A valuable teammate, capable of working collaboratively with different teams.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Responsible for performing metallurgical preparation and evaluation of various type of coatings and materials for aircraft engine component repair. You will also be responsible to perform mechanical testing on the coating specimen.

Essential Responsibilities:

• Prepare the sample for mechanical testing
• Prepare the sample for metallurgical evaluation
• Operate and maintain metallurgical Lab equipment
• Adhere to laboratory procedures when operating Lab equipment
• Perform incoming inspection of controlled material if required
• Liaise with vendor on externally provided metallurgical service
• Ensure all external metallurgical service quotation, purchase order and certificate be delivered timely
• Work with Engineering for NPI metallurgical evaluation and analysis

Qualifications/Requirements:

• Minimum GCE ‘O’ level with 3 years of relevant experience
• Preferably NITEC/Higher NITEC in Mechanical/Materials/Quality Assurance Engineering; or Diploma in Mechanical/Materials/Quality Assurance Engineering
• Able to read and understand the manufacturing operation sheets and standard operation procedures in English

Desired Characteristics:

• Knowledge in material science and interpretation of microstructure
• Experience in laboratory sample/specimen preparation and evaluation
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Title: Compliance - KYC Analyst

For quick response, plz share your resume to [email protected] or WA at +65 92333815.

JD:

• Assist Front Office with preparing and submitting KYC profiles to ensure completeness and accuracy of submissions.
• Perform back ground checks, name screenings, and public searches to check clients for adverse news.
• Work to establish a clear Source of Wealth profile, using client data, publicly available information and corporate records.
• Sourcing relevant documentation, news articles, and internet searches to corroborate the clients' declarations.
• Assist to accurately update profiles and submissions and work in conjunction with Front office and KYC team to complete cases.
• Preferred to have had both Front office and KYC experience.
• Proficient in performing screenings, corporate searches and back ground checks
  Strong communication skills – able to manage relationships with both clients, internal and external stakeholders.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

HP: +65 92333815

Recruitment Manager

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

As an intern for the Assurance, your responsibilities include:

• Working as part of an audit team to complete, or assist in the completion of audit tasks which includes financial and statutory audits of companies
• Assist the team to perform analytical review of audit documents
• Assist the team with the preparation of supporting documents to support the opinion in the financial statements
• Assist the team with vouching of audit documents
• Assist the team to preform statutory reviews
• Assist the team to perform administrative works such as referencing, casting, indexing, etc.

Requirments:

• Training will be provided
• You must be a Singaporean or SPR, and able to commit for at least 3 months

Role Overview:

We are seeking an experienced QA Engineer with a strong background in the oil and gas sector, specifically in FPSO projects. The QA Engineer will be responsible for ensuring that all quality assurance and quality control procedures are in place, adhered to, and continuously improved throughout the project lifecycle.

Key Responsibilities:

1. Quality Management System (QMS):
   Develop, implement, and maintain the project-specific Quality Management System in alignment with ISO standards.
   Ensure compliance with company policies, client requirements, and regulatory standards.
2. Project QA Oversight:
   Conduct regular quality audits, inspections, and surveillance activities on FPSO project sites.
   Identify and document non-conformances, and lead the resolution process to prevent recurrence.
   Ensure that all QA documentation is properly maintained and accessible.
3. Supplier and Vendor Quality Control:
   Review and approve vendor QA/QC documentation.
   Conduct supplier audits to ensure compliance with project quality requirements.
   Coordinate with procurement teams to ensure that materials and equipment meet quality specifications.
4. Engineering & Fabrication Quality Assurance:
   Ensure that engineering designs, drawings, and specifications comply with quality requirements.
   Monitor fabrication and construction activities to ensure they are carried out according to approved procedures and quality standards.
5. Testing & Commissioning:
   Oversee testing and commissioning processes to ensure systems meet quality standards before handover.
   Verify that all test procedures and results are properly documented.
6. Risk Management:
   Identify potential quality risks and implement mitigating measures.
   Participate in risk assessments and HSE (Health, Safety, and Environment) meetings.
7. Training and Continuous Improvement:
   Provide training to project teams on quality processes and best practices.
   Promote a culture of continuous improvement by identifying opportunities for process optimization.

Qualifications:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 5 years of experience in a QA role within the oil and gas industry, with specific experience in FPSO projects.
• In-depth knowledge of quality management systems (e.g., ISO 9001) and industry standards.
• Strong understanding of fabrication, construction, and commissioning processes for FPSOs.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership skills.
• Certification in quality auditing (e.g., ISO 9001 Lead Auditor) is an advantage.

Job Responsibilities:

• Ability to engage, negotiate and answer customer requests and align on quality expectations. Proficient in 8D problem solving methodology
• Determining, negotiate and agree on in house quality procedures, standards and specifications.
• Align customer requirements and ensuring internal gaps are closed. Able to travel within the SE Asia and APEC region.
• Investigating customer feedback/complaints and monitor KPI & BBSC e.g customer complaint rate/COPQ etc.
• Coordinate customer audit, follow up on audit report/closure.
• Drive 8D meeting with internal team, investigation and CAPA.
• Prepare weekly/monthly customer reports, quality survey, PPAP, VDA audit for PDP etc.
• Spearhead Quality Improvement Project with customer, fan-out/BKM with other sites.
• Working with operations staff to establish systems, standards and procedures.
• Assist in internal statistical information, distribution and analysis. Knowledge of SPC and ability to use Minitab/JMP.

Job Requirement:

• Degree in Customer Quality Engineering/ Engineering/ Material Science/Science related fields
• More than 3 years working experience in Customer Quality Role
• Knowledge in ISO9001/IATF16949 quality management system
• SPC knowledge, statistical analysis tool e.g Minitab, JMP etc
• Knowledge in FMEA ,MSA ,8D, FTA etc
• VDA certified auditor added advantage

As a Senior Quality Engineer – Mechanical Parts & Complex Assemblies at MKS Instruments Manufacturing operation located in Kaki-Bukit, Singapore you will be responsible for leading the quality assurance of mechanical components and complex mechanical assemblies used in our laser-based systems. This role involves developing and executing inspection and testing protocols, managing inspection systems, and performing failure analysis activities. The ideal candidate will possess a strong background in dimensional inspection, troubleshooting complex mechanical parts and assemblies, and extensive ISO-9001 quality systems expertise. This role involves ensuring product quality, resolving issues related to mechanical components & sub-systems and driving continuous improvement initiatives.

Key Responsibilities:

Quality Assurance & Inspection:

• Develop detailed dimensional inspection plans for mechanical components and assemblies using tools such as CMM, and optical comparators.
• Develop and maintain inspection protocols and test plans for mechanical parts and assemblies.
• Interpret technical drawings, GD&T (Geometric Dimensioning and Tolerancing) and engineering specifications to ensure compliance.
• Failure analysis & Troubleshooting: Investigate failures in mechanical parts and assemblies, identifying root cause using techniques such as metallurgical analysis, fractural analysis and FMEA.
• Utilize statistical methods to define appropriate sample sizes based on part criticality, lot size and supplier performance.
• Validate cleaning processes for incoming parts and verify their compliance with cleanliness requirements.
• Conduct first article inspections (FAI) for new parts to validate conformance to design specifications.

Quality Management System (QMS):

• Implement and maintain QMS processes in compliance with ISO 9001 and other relevant standards.
• Support internal and external audits, including preparation, execution, and follow up actions.

Supplier Quality Improvements:

• Evaluate and qualify suppliers for mechanical components, ensuring adherence to quality standards and specifications.
• Collaborate with supplier to investigate and resolve non-conformances and drive quality improvement.

Data Analysis & Reporting

• Analyze quality data to identify trends, drive decision-making, and recommend process improvements.
• Create reports and dashboards to communicate quality performance metrics to stakeholders.

Continuous Improvement:

• Lead initiatives to improve product quality and manufacturing processes.
• Provide recommendations for process improvements based on data analysis and best practices.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost effectiveness.

Requirements:

• Bachelor’s/Master’s degree in Mechanical Engineering, Quality Engineering, or a related field.
• 5+ years of experience in mechanical parts inspection, quality engineering, failure analysis, preferably in laser, systems, or manufacturing environments.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Strong background in mechanical parts inspection, including dimensional inspection tools & GD&T.
• Proficiency in CAD software for drawing interpretation (e.g Solidworks, Autocad).
• Experience with Quality Software such as Minitab, SPC tools, SAP ERP & Agile PLM.
• Experience in failure analysis techniques, Optical Microscopy, Stereo Microscopy, Material property analysis, Surface roughness measurements etc.
• Strong knowledge of QMS and ISO 9001 standards.
• Experience with supplier audits and managing vendor relationships.
• Familiarity with fabrication and cleaning processes for mechanical parts.
• Excellent problem solving, analytical, and communication skills.
• Experience with lean manufacturing and continuous improvement methodologies.
• Hands on experience with laser or systems manufacturing is a plus.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Leica Microsystems, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

Shape the Future with Us!

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Senior Quality Engineer, PQE is responsible to ensure the quality of both medical and non-medical products through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will address production quality issues, collaborate with cross-functional teams to find root causes, and drive continuous improvement to build high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, attention to detail, a proactive mindset, and preferably experience in people management.

This position reports to the Senior Manager Quality Assurance and is part of the Production Quality Engineering (PQE) team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Address production quality issues by identifying problems and collaborating with cross-functional teams to develop solutions for overall product quality improvement.
• Utilize statistical tools to identify trends and patterns for enhancing the production process and ensuring quality.
• Investigate and correct root causes of product failures occurring in the field.
• Conduct periodic production audits to ensure compliance with established policies, procedures, and control plans.
• Participate in lean and continuous improvement initiatives, while adhering to company EHS requirements to prevent injuries and maintain safety.

The essential requirements of the job include:

• Bachelor's degree in Mechatronics, Mechanical Engineering, or Electronics.
• At least 5 years of relevant experience in biomedical or medical device manufacturing.
• Proficient in statistical control methods and QMS 9001; familiarity with ISO13485, USFDA QSR/cGMP, and ISO14971 for medical devices is advantageous.
• Computer literate in MS Office and Lotus Notes.
• Strong analytical, problem-solving skills, and knowledge of lean and investigation tools such as 8D and fishbone diagrams, with a solid understanding of engineering principles, theories, and concepts.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Workplace Safety Management

• To establish Safety & Health Management System (SHMS) on site
• Implement/Maintain project and corporate SHMS
• Identify and assess risk arising from the workplace or work process.
• Recommend and implement safe work procedure.
• Implement measures to improved workplace safety performance
• Implement Company’s EHS policies and standards
• Comply with Statutory Requirements under MOM and NEA
• Participate in the corporate EHS Committee
• Conduct In–house training
• Plan and implement EHS plans, trainings, meetings and promotional programmes
• Conduct regular inspections at the workplace to identify hazards and risks, followed by recommending remedial and preventive measure
• Enforce EHS / OSH rules and regulations at the workplace
• Act as secretary for the WSH Committee; preside in the absence of committee chairman.
• Investigate, handle, report and liaise with relevant parties for accidents or EHS non-compliance.

Contract Duration:

• 3 Months
• Staring Date: 1 Feb 2025

Deployment:

• Mon to Saturday - 8.30 am to 5.30 pm (6 Days/ Week)

Job Details:

• Project Under HDB.
• Conduct regular inspections and risk assessments at the workplace to identify any foreseeable risk arising from the workplace or safe work processes
• Recommend reasonable measures to eliminate any foreseeable risk at the workplace
• Ensure all statutory regulations are comply with NEA’s requirements
• Prepare and submit weekly environmental report
• Enforce & improve Workplace Safety and Health / Environmental Control standard at the workplace
• Any other duties as assigned by superior(s)

Requirement:

• Must be a NEA Apporved ECO.
• Atleast 2 Yrs experience as ECO.
• Preferably with Advance diploma in Workplace safety certificate.

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781