Responsibilities:

We are looking for compliance personnel to assist in enhancing the compliance risk framework of the company. The candidate will help to manage and execute the compliance programs, provide policy guidance and to carry out compliance training for the company’s diversified investment business groups. Depending on the candidate’s experience, duties will include the following:

• Conduct compliance reviews and monitoring/surveillance across the company’s business activities;

• Develop risk-based compliance programs to facilitate the execution of compliance reviews and monitoring;

• Advise the business units in meeting regulatory requirements through implementing appropriate compliance risk policies, assisting with the design and implementation of risk and compliance management initiatives, and enhancing and improving internal processes and procedures;

• Review the completed risk and compliance assessment returns from each area of the business, identifying trends and areas of concern and working with the business units to reduce any unacceptable exposures to regulatory risk;

• Provide compliance training and support through issuing of internal compliance updates, training modules and compliance guidelines

Requirements:

• Minimum 3-5 years’ relevant experience in compliance, audit or risk management in the securities, financial advisory or fund management industry

• Should have knowledge of key applicable regulations in Singapore such as the Securities & Futures Act, Financial Advisers Act, MAS Notices and Guidelines, AML/CFT regulations

• Excellent writing and communication skills

• Good interpersonal, influencing and networking skills

• Team player

• 5 (five) years of experience in similar services in the Oil and Gas industry
• Expert understanding of planning software such as Primavera P6, MS Project, and Power BI
• Expert understanding of project management parameters such as WBS, Project Risks, Project Schedule, and others within the PMBOK area of knowledge
• Experience in developing, analyzing, and adjusting Schedule in Primavera P6 software for big or complex projects
• Experience in Critical Path Report issuance and analysis
• Execution of daily/weekly reports and activities controls
• Expert understanding of Key Performance Indicators (KPIs) and control curves (S-curves, Rundown curves)
• Advanced use of Office package software such as Power Point, Word, and Excel (preferably can create formulas, pivot table)
• Experience in FPSO construction and commissioning
• Good command in English language (both written and spoken)

As a Non-Volatile Memory Quality & Reliability Assurance (NVMQRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analyis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., PE, PYE) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems (example: GPSS) for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode for NOR * NAND product family
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.

Responsibilities:

Responsible for Company wide quality assurance activities and serve as an effective link in the translation of customers’ requirement and our capabilities towards satisfying or exceeding customers’ requirements

> Handle external quality complaint from customers

> Perform failure analysis on the returned PCBA

> Liaise with internal relevant sections or departments on the root

cause and countermeasure to be implemented

> Provide corrective action report within the specified time frame to

the customer

> On-site visit to customer for verification and critical model launch

follow-up

> Perform process/verification audit on site for continuous

improvement activities

Requirements:

1. Degree in any Engineering discipline (Quality Engineering preferred)

2. 2 years of experience in Quality Assurance activities/operational

3. Good communication, report writing and presentation skills

4. Good analytical skills with ability to work effectively

5. Independent, decisive and good in problem solving

6. Proficient in Microsoft Office

Key Responsibilities:

Research and Development (R&D):

Lead and oversee the company's R&D initiatives to develop innovative products and solutions.

Collaborate with cross-functional teams to ensure alignment of R&D goals with business objectives.

Monitor industry trends and technological advancements to maintain the company's competitive edge.

Prepare and manage budgets for R&D projects, ensuring optimal resource allocation.

Quality Management:

Develop, implement, and maintain the company’s quality management system (QMS) in compliance with international standards such as ISO 9001 or ISO 13485.

Conduct regular quality audits and inspections to ensure adherence to established procedures and standards.

Manage and resolve product quality issues, ensuring prompt corrective and preventive actions (CAPA).

Train employees on quality protocols and best practices to foster a culture of continuous improvement.

Regulatory Affairs:

Ensure the company’s products comply with all relevant local, regional, and international regulatory requirements.

Prepare and submit regulatory filings, including product registration, certifications, and renewals.

Act as the primary liaison with regulatory agencies and authorities, addressing inquiries and ensuring timely approvals.

Keep the organization updated on changes in regulatory policies and standards, adapting company processes as needed.

Documentation and Reporting:

Maintain comprehensive records of quality and regulatory processes, audits, and certifications.

Generate detailed reports and presentations for internal and external stakeholders on quality and regulatory performance.

Develop and update standard operating procedures (SOPs) to reflect regulatory requirements and quality standards.

Team Collaboration:

Work closely with the operations, manufacturing, and sales teams to ensure product quality and compliance throughout the lifecycle.

Support cross-departmental training on regulatory and quality matters.

Qualifications:

• Bachelor’s degree in Chemistry, Life Sciences, Engineering, or a related field (Master’s preferred).
• Strong knowledge of regulatory frameworks such as FDA, CE, or CFDA, and quality standards like ISO 9001 or ISO 13485.
• Excellent organizational and communication skills, with the ability to manage multiple tasks and meet deadlines.
• Proficiency in regulatory documentation and quality management software is a plus.
• This expanded job description ensures clarity in the role’s expectations and responsibilities while providing a comprehensive overview for potential candidates.

Our Client is a Singapore based company in Medical Devices. Due to business needs, they are now recruiting a QC Supervisor to be part of their Quality team for ongoing transformation projects. They are located at West.

Duties:

• Guide and coach lab technicians.
• Inspect raw materials and conduct analyses on WIP and finished product samples.
• Support QA in failure analysis, corrective actions, and customer complaints.
• Assist with GMP audits, validations, and maintaining quality and technical files.
• Prepare technical reports, standards, and specifications for processes and products.

Requirements

• Minimum Diploma in Chemical/ Biotechnology or related field
• Possess supervisory experience in leading a team of technicians

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

About the Company:
Our client is one of the leading pharmaceutical ophthalmic solutions manufacturers in the world, dedicated in providing sterile pharmaceutical ophthalmologic solutions, from prevention to delivery of care at every touchpoint, advancing wellness in hospitals, clinics and home-care sectors.

Position Overview:
The incumbent works closely with the QC Manager on all aspects of Quality Control in the labolatory, in particular, on product reliability and compliance to all established product standards. Ensures that all aspects of quality within the organization is upheld.

Responsibilities:

• Able to provide guidance and coach lab technicians.
• The incumbent inspects all incoming raw material for compliance according to current standards.
• The incumbent conducts periodic checks and analysis on all WIPs.
• The incumbent retains finished product samples from production to conduct checks and analysis.
• Assist QA on failure analyses, corrective and preventive action response to customer’s complaint.
• Assist in GMP audits, validation, qualification and change control.
• Assist in maintaining Product Quality and Technical File.
• Write technical papers or reports or prepare standards and specifications for processes, products, or tests.

Requirements:

• Diploma/Degree in related field (Chemical Process Technology, Pharmaceutical, Chemistry, Biotechnology).
• Proven experience in the evaluation and validation of materials, products, or processes, adhering to regulatory standards.
• In-depth knowledge of the cGMP and ISO 13485.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

*We regret to inform that only shortlisted candidates will be informed.*

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Information:

1. Salary range: $2,800 - $3,800
2. Working hours: Mon-Fri - 8.15am to 5.45pm

Responsibilities:

• Inspect outgoing parts & incoming parts according to specification of inspection
• Maintain quality record and file quality data.
• Highlight quality problems to Managers for action.
• Ensure non-conforming products are not mixed with good products prior to disposition.
• Authorise the rejection of parts if found unsatisfactory.
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.
• Perform factory routine test and check of switchboards completed in the workshop.
• Testing and commission of switchboards on board vessels or on-site to the satisfaction of customers;
• Attend to warranty claims / quality complaints. Conduct tests on switchboards.
• Assist the Manager in quality responsibilities and achieving quality objectives.
• Maintain good housekeeping in the QA Department.
• Observe and adhere to safety rules during the performance of every task.
• Ensure the use of calibrated instrument for inspection.
• Initiate action to prevent the occurrence of Product Non-Conformity.
• Initiate, recommend or provide solutions to problem detected.
• Verify the implementation of solutions.
• Control further processing and delivery of Non-Conforming products until the deficiency corrected
• Carry out other responsibilities as and when assigned by the superiors.
• Follow the procedures of Quality Management System for effective implementation and control.

Requirements:

• ITE/Diploma in Electrical/Mechatronics Engineering
• At least 2 years of QA experience

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Key Responsibilities:

• Plan project schedules and resource allocation, considering dependencies.
• Manage project issues and provide documentation for management reporting.
• Set critical evaluation criteria (e.g., Critical Points) and coordinating with the departments (e.g., IT, Compliance, Front office, Transaction banking).
• Respond to regulatory requirements and ensure compliance with regulatory changes.
• Report on project progress, challenges, and solutions to senior management.
• Scheduling project and resource planning ensuring that resource allocation is optimized and dependencies across all projects are considered.
• Provide administrative support to ensure smooth project execution.

Basic Requirements:

• Extensive experience in managing PMO tasks, particularly in core banking projects.
• Proven ability to lead and execute all PMO tasks.
• Background in the banking industry (either as an employee or consultant).
• Familiarity with package system implementations.
• Strong communication skills for interacting with diverse stakeholders.
• Attention to detail and Proactive in solving problems
• Experience in core banking projects.
• Experience in managing cross-functional issues in areas like Remittance, Trade Finance, Corporate Lending, Markets, and Security.
• Education: Diploma/bachelor's degree in computer science, Information Technology, or a related field.
• Skills: Strong problem-solving, organizational, and analytical skills, with the ability to work independently or in teams.
• User Interaction & Requirements Gathering: Experience interacting with users to gather and refine project requirements will be an advantage.
• Experience in developing user-friendly automation tools to enhance project efficiency will be an advantage.

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• Min Degree in Science / Chemical Engineering or equivalent with relevant pharmaceutical experience.
• Minimum 3 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to: [email protected]

Alex Goh Hock Leong (R1763413)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Highlights

• Outstanding career Growth & Development opportunities
  
• Competitve Salary & Work benefit package
  
• Passionate, energetic & Innovation Work culture
  

Job Description

Job scope:

 Responsible for a portfolio of audit engagements assigned to you

 Take charge for the planning, execution and documentation of audit engagements

 Follow up on client and engagement outstanding matters independently.

 May be required to work overtime or outstation for overseas assignments

Requirements:

• At least 1 to 3 years audit working experience.
• Degree in Accounting, Finance or related discipline, or professional qualification recognised by Institute of Certified Public Accountants of Singapore (ICPAS),
• Preferably familiar with International Standards on Auditing
• Hardworking and positive attitude, with ability to work as team or individually
• Strong analytical and organisational skills.
• Good communication skills in English
• Meticulous and independent with supervisory skills and the right working attitude

We welcome qualified candidates who are/have:

 Responsible and ethical

 Highly motivated with the drive to excel

 Able to multi-task and meet tight deadlines

 Good interpersonal skills with positive attitude

 Diligent, meticulous in work and willingness to learnR

Compliance Processing Officer

• Working Days: 5 Days [Monday - Friday]
• Working Hours: 8.30am - 5.30pm
• Salary: $2600 - $3000 + AWS + VB
• Location: Near Clarke Quay MRT

Requirements:

• Diploma in Food Science & Technology, Chemistry and other science-related fields
• Preferably 1 year working experience
• Able to travel locally.

Summary:

This role is supporting the company’s compliance program and services, including Halal Conversion and Management, Training, and Inspection/Audits. These positions require a combination of independent project work, compliance monitoring, and client-facing activities. Responsibilities include performing periodic audits, investigations, and hands-on service delivery, while also contributing to service development through a mix of on-the-job learning and formal training.

Responsibilities:

• Prepare detailed audit and investigation reports that highlight areas of non-compliance and associated risks.
• Document all compliance activities using designated checklists and databases according to company policies and workflows.
• Conduct timely follow-ups with clients, close audits efficiently, and ensure findings are resolved.
• Perform compliance audits and monitor various Halal operations.
• Maintain and organize both electronic and hard copy files and records.
• Prepare and process documents for submission to relevant authorities, ensuring timeliness.
• Continuously engage and communicate with clients and authorities as necessary for applications.
• Monitor audit activity schedules and provide thorough follow-up, including reviews of client corrective actions.
• Provide administrative support and contribute to project committees.
• Communicate proactively with clients via phone, email, and face-to-face meetings to gather feedback and information.
• Undertake any other assignments and tasks as required.
• Any other assignments and tasks given

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Reporting to Global Category Microcontroller & Memories (MCM), strive to secure “Best in Class” consistent and sustainable supplier quality performance to reach the Continental Business and Quality targets.
• Maintenance of the defined Supplier Quality Management System (procedures, guidelines, and tools) to ensure the requested quality is in line with the defined supplier management strategies to meet the quality targets.
• Execution of supplier evaluations and assessments to support the cross-functional supplier selection team with the required quality data.
• Driving supplier development & improvement activities at supplier's site.
• Initiation and introduction of the preferred supplier and components strategy.
• Design, initiation, and control of preventive quality management measurements in the design and development phase for supplied parts and services to ensure that our products meet the quality requirements defined.
• Component introduction through robust APQP process which include Component sourcing, writing of specifications, handling of qualifications and risk management.
• Manage change requests (PCN) from component suppliers and assure comprehensive qualification of any change.
• Support of the data system to collect and evaluate supplier quality related key performance indicators (KPIs) for the regular reporting of quality performance.
• Support for the continuous improvement process of all supplier quality-related processes, guidelines, and tools by means of supplier audits, on-site assessments, and benchmarking and best practice sharing programs.

Qualifications

• Degree in Electronics/Electrical Engineering (or related) with minimum 5 years’ experience, preferably in the automotive industry
• Candidates with experience in semiconductor processes (e.g., wafer process technologies, back-end assembly, and testing), knowledge in electronic component & qualification requirements (e.g., AEC-Q, JEDEC, IP qualification) preferred. Candidate with more work experiences may be considered for Principal role.
• Strong experience in quality systems, process audits and part qualification.
• Understanding of automotive practices such as APQP/PPAP/VDA6.3/IATF16949.
• Able to lead suppliers' development and audit activities within Asia.
• Able to work independently and travel frequently (e.g. SE-Asia, China, Japan & S. Korea).
• Strong interpersonal and communication skills e.g. in collaborations, problem solving process, conveying technical details and presentation.

This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

• Inspect in-coming and outgoing products according to policies standard.
• Perform all product processes within section (eg, QC,SAO), Reworks, Repairs, Defective photo-taking

2. Contribute to continuous improvement

• Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system
• Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

• At least 1 year of experience in Gold quality control in retail jewellery preferred
• If no QC experience in retail jewellery then at least 1 year of experience in QC control in manufacturing
• At least Diploma in any discipline
• Basic understanding of production methods.
• Attention to detail
• Able to use basic MS Office.
• Good Communication and Interpersonal Skills
• Able to multi-task and quick learner

• Monitor Product Quality Compliance
• Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc
• Identify OOS, deviations and quality problems
• Report testing activities and results
• Comply with Quality and HSE procedures when carrying out sampling and QC tests
• Manage Laboratory Operations
• Follow the organization’s operational excellence model for laboratory work
• Perform routine calibration and maintenance of laboratory equipment
• Report equipment OOS issues and equipment purchase requests
• Maintain integrity, accuracy and completeness of QC data and records
• Optimise quality and efficiency of department workflows and activities
• Assist in preparing and participate for laboratory inspections and audits
• Compile data to support business and performance metrics reporting
• Propose solutions to improve QC procedures, activities and workflows

Requirements

• Min NITEC / Diploma in chemistry / chemical engineering / Chemical process Tech
• Min 1 year of HPLC lab working experience

Mon to Sun - Any 5 days. 2 rotating shifts

Based at Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

About us

Bruc Bond simplifies corporate banking. It connects entity clients to a diverse network of partner banks, and manages their relationship seamlessly for the long term with the corporate mission of providing Private Banking experience to Corporates and other financial institutions.

Licensed in Singapore as a Major Payment Institution, Bruc Bond facilitates the opening of bank accounts and enables their ongoing management through its global banking partnerships and secure open-banking platform. The technology allows integration of multiple bank accounts, as well as digital connectivity to global banks and external service providers via APIs so that clients’ transaction banking can be conducted from a single window.

Bruc Bond is FinTech-Certified with a stable growth record in Singapore and overseas.

We provide a favorable working environment with a strong start-up culture including facilities for employees’ professional and individual growth, with particular emphasis on financial services compliance. We present an opportunity for the right candidate to join and grow as part of a team with a global presence, and expanding our licensing footprint.

What you will do for us:

- Be the visible leader and go-to expert of the Company’s Compliance function for both internal and external stake-holders, including financial services regulators

- Maintain and ensure adherence to the Company’s Compliance Manual, including through delivery of associated Training and Effectiveness assessment

- Conduct periodic Business-wide and AML/CTF Risk Assessments, and recommend preventive and detective control actions to senior management

- Through participation in external stake-holder engagements, ensure the business is kept up to date on regulatory change requirements, including timely implementation of control requirements

- Ensure timely and accurate reporting to regulatory bodies

- Participate in continuing education requirements to keep valid necessary professional certifications

- Hands-on implementation of client-specific compliance controls including in the area of AML/CFT Policy & Procedures, Training, Open-reporting, Conflict of Interest, and timely internal testing/independent audits when needed, including execution of conduct of client-specific risk assessment, due diligence to procedures and on-boarding actions

- Conduct and maintain minutes of periodic Policy Compliance Committee deliberations and actions, in order to enable the Company’s Board to discharge its oversight responsibilities

- Assist the CEO and other Functional heads in implementing the company’s growth plans in a compliant manner by working with applicable internal and external stake-holders involved across 3 pillars of our strategy, including development of Digital Asset transactions infrastructure

- Offers growth opportunity to be designated as group Money Laundering Reporting Officer and Chief Compliance Officer for the right candidate

Requirements

- Degree qualified, with minimum 5 years of financial services compliance work experience in Singapore

- Solid technical understanding of financial regulations affecting AML/CFT, KYC, PEP, sanctions and aspects of general compliance

- Demonstrable experience in digital asset storage and transactions management is a must, including implementation of the FATF ‘travel rule’

- Experience in dealing directly with financial services regulators and/or regulatory aspects e.g. payment service act in Singapore

- Ability to engage internal stakeholders and advise and make recommendations on regulatory company policies

- Strong knowledge of MAS regulations; experience working with MAS would be an advantage

- Experience in a compliance role in a financial institution/Bank, preferably in the corporate banking environment

- Professional Certification(s) in the area of Compliance or AML/CTF

Skills

- Ambitious individual ready to take on real responsibilities and drive company policy

- Detail-oriented with an analytical mind, demonstrating strong problem-solving skills and delivering accurate results

- Ability to work on projects alone (self-starter) and set-up monitoring of progress

- Fast and independent learner

- Good team player

- Ability to adapt to rapid changes and deal with certain level of unknown

- Experience in working across time zones when required and flexibility in approach is a must

- Experience in a global organization with multiple locations is an advantage in the present environment

- Use of electronic analytical and communication tools such Microsoft Office suite and remote meetings

Job Responsibilities:

• Handle client inquiries and provide pertinent information via email or WhatsApp.
• Preparation and Lodgement of ACRA forms such as Annual Return, Extension of Time, Change of Officers and Particulars etc.
• Send reminders for compliance deadlines, such as annual returns, and other obligations.
• Facilitate communication and coordination with other teams as needed.
• Preparation and Filing of minutes and resolutions of Board of Directors and of Shareholders.
• Attend to filing, typing and scanning of documents as necessary.

Job Requirements:

• Candidates should have a minimum of two years of experience in the relevant field.
• Preferably adept at effectively using Excel, Word, and other CRM platforms.

(Halal Conversion and Management, Training and Inspection/Audits)

Compliance Processing Officer [ Halal Certificate ]

• Working Days: 5 Days [Monday - Friday]
• Working Hours: 8.30am - 5.30pm
• Salary: $2,300 - $2,800 + AWS + VB
• Location: Near Clarke Quay MRT

Requirements:

• Diploma in Food Science & Technology, Chemistry and other science-related fields
• Preferably 1 year working experience
• Able to travel locally.

Summary:

This role is supporting the company’s compliance program and services, including Halal Conversion and Management, Training, and Inspection/Audits. These positions require a combination of independent project work, compliance monitoring, and client-facing activities. Responsibilities include performing periodic audits, investigations, and hands-on service delivery, while also contributing to service development through a mix of on-the-job learning and formal training.

Responsibilities:

• Prepare detailed audit and investigation reports that highlight areas of non-compliance and associated risks.
• Document all compliance activities using designated checklists and databases according to company policies and workflows.
• Conduct timely follow-ups with clients, close audits efficiently, and ensure findings are resolved.
• Perform compliance audits and monitor various Halal operations.
• Maintain and organize both electronic and hard copy files and records.
• Prepare and process documents for submission to relevant authorities, ensuring timeliness.
• Continuously engage and communicate with clients and authorities as necessary for applications.
• Monitor audit activity schedules and provide thorough follow-up, including reviews of client corrective actions.
• Provide administrative support and contribute to project committees.
• Communicate proactively with clients via phone, email, and face-to-face meetings to gather feedback and information.
• Undertake any other assignments and tasks as required.
• Any other assignments and tasks given

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Responsibilities:

• Provide timely and accurate AML/CFT compliance advisory to the relevant stakeholders to ensure that the company complies with applicable rules and regulations
• Keep abreast of AML/CFT regulatory changes and provide timely dissemination of regulatory updates to ensure that the business units and relevant departments are aware of the latest rules and regulations
• Implement and maintain robust framework for AML/CFT compliance reviews to assess the implementation of applicable rules and regulations
• Devise and maintain AML/CFT training materials and conduct regular trainings to all staff
• Undertake additional functions and duties when required

Requirements:

• A good degree in any discipline
• Good command of English and communication skills
• Independent, analytical, meticulous and self-motivated
• Able to cope with pressure and tight deadlines
• Strong interpersonal and analytical skills
• Candidates without working experience are encouraged to apply

Job responsibilities:

• Collaborate closely with stakeholders and project team to identify, analyze and review design needs and requirements for the estimation of testing scope and schedule.
• Develop and maintain software testing deliverables, such as test plans and functional test cases in accordance with requirements.
• Conduct functional test execution.
• Conduct defect management.
• Collect and report on testing progress.
• Adopt, execute and champion the compnay's software testing and quality assuance processes.
• Participate actively in various Agile ceremonies such as sprint planning, stand-up meetings, and sprint retrospectives.

Requirements:

• 3-6 years of relevant experience in software testing.
• Experience in Software Testing, System Test, Integration Test and/or User Acceptance Test is a plus.
• Understanding of Software Development Life Cycle (SDLC) in Waterfall or Agile project.
• Strong analytical and proven ability to quickly understand complex business and systems and provide a suited solution for clients.
• Ability to adapt to heavy workload in a fast-paced environment.

Reporting to Contracts & Compliance (HOD), the C&C Senior Executive/ Assistant Manager is responsible for Contracts Review, Negotiation, and Compliance matters in the Research Division.

Main Responsibilities:

1. Oversee and Manage C&C unit

• Track and manage legal agreements, and maintain legal agreement database,
• Facilitate the negotiation and execution of legal agreements,
• Provide support to facilitate the training and guiding of staff on compliance (HBRA & PDPA),
• Act as check points for compliance (HBRA, PDPA) requirements by sighting compliance related approval documentation where necessary,
• Provide guidance to C&C unit junior staff,
• Improve contracts review workflow,
• Coordinate with CTE-CTO and LCDG (other contract teams in NCCS)
• Update and manage C&C policy.

2. Intellectual Property (IP) Management & Revenue

• Coordinate with SingHealth Intellectual Property (SHIP) unit for paperwork involving IP filing
• Track and monitor revenue from commercialised IP agreements.

3. Research Admin

• Broadcasting research related events to the research community on campus; provides administrative support for research events hosted by NCCS,
• Support HBRA and PDPA compliance matters (e.g. broadcast updates to NCCS stakeholders),
• Organise, coordinate and collate Research Metrics Info for submission to Office of Research, SingHealth (translational funding, IP and licensing indicatros)
• Support with KPIs collation for NMRC Centre Grant

Requirements:

• Bachelor of Science degree with a keen interest in contracts review, compliance & governance, and research administration.
• Must possess a flair for writing and a good command of English to handle minutes and draft policy papers/ presentation slides
• Excellent oral and presentation skills for effective communication with PIs, clinicians & peers in other departments
• Must be IT savvy and able to navigate through standard software applications and databases
• Familiar with HBRA and PDPA regulations
• Experience in reviewing contracts
• Must be meticulous and have good organisational skills to create / maintain detailed records.
• Independent worker with a strong sense of initiative

An exciting opportunity as a Planning and Control Engineer awaits the successful candidate.

Responsibilities:

· Read the Contract and understand the overall project strategy to make proper planning evaluations of the work scope

· Support the project planning team on site, receive the planning and control data, analyze and identify risks or potential problems in the project progress, present the findings to the management team

· Participate in the planning meetings and all related meetings to be aware of the main concerns and issues of the project on the site

· Comment the reports, the schedules and all the data issuances related to the site scope, warn/alert the management team if any inconsistence or anomaly is found

· Liaise between the Planning and the Construction and Assembly (C&A) teams regarding the activities happening on site, and check if the activities are happening in accordance with the last updated plan and schedule issued

Requirements

· 5 (five) years of experience in similar services in the Oil and Gas industry

· Expert understanding of planning software such as Primavera P6, MS Project, and similar

· Expert understanding of project management parameters such as WBS, Project Risks, Project Schedule, and others within the PMBOK area of knowledge

· Experience in developing, analyzing, and adjusting Schedule in Primavera P6 software for big or complex projects

· Experience in Critical Path Report issuance and analysis

· Execution of daily/weekly reports and activities controls

· Expert understanding of Key Performance Indicators (KPIs) and control curves (S-curves, Rundown curves)

· Advanced use of Office package software such as Power Point, Word, and Excel

· Experience in FPSO construction and commissioning

· Good communication skills in English language

· Flexible working at Yards

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets