Responsibilities:

1. The ECO shall pay attention to earth control measures and silt control of the Worksite including site checks and submission of reports on alternate days or more frequently if required.

2. ECOs shall use the checklist provided by QECP to carry out the ECM checks. The ECO shall review the checklist and ensure that the ECM is adequate. ECOs shall also highlight problems relating to ECM to QECP so that reviews to the ECM can be done timely.

3. The ECO shall look out for conditions/situations in construction site which causes environmental health problems. He should report these conditions/situations to the occupier of the construction site together with recommendations on remedial measures to be taken to prevent recurrence. The main areas where the ECO should pay attention to are:

· disease-bearing insects and rodents;

· proper disposal of construction waste/marine clay;

· noise, air and water pollution;

· earth littering;

· siltation of drain;

· food hygiene in canteens;

· proper maintenance of septic tank(s)/holding tank(s), chemical/portable toilet(s) and other sanitary facilities; and

· any other environmental health matters.

Requirements:

· Full time

· Registered with the Director-General of Public Health.

· At least 3 years relevant experience.

We regret to inform that only shortlisted candidate will be notified.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 5 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Our Client is a leading Japanese entertainment company, producer of collectible card games and trading cards. They are looking for a Card Game Localization / Product Developement Executive to join their team.

Role & Responsibilities:

• Review and edit content, including websites, marketing materials and other digital assets, for
  quality, consistency and adherence to brand guides
• Localize digital content from Japanese to English
• Quality assurance of digital game translations from Japanese to English
• Write, edit and proofread engaging and persuasive copy for various channels, including
  websites, social media, email campaigns and print materials
• Collaborate with marketing, design and product teams to craft messaging that aligns with
  campaign goals and brand identity
• Stay up-to-date with internet culture to continuously improve content reach

What it Takes:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor’s
  Degree/Post Graduate Diploma/Professional Degree in Communications, Linguistics,
  Marketing, or a related field
• Strong understanding of social media/digital marketing platforms
• Strong understanding of cultural and linguistic nuances
• Exceptional and fluent written and verbal communication skills in both English and Japanese
  in order to liaise with Japanese speaking associates and localize content from Japanese to
  English (minimum JLPT N2 preferred)
• Willingness to learn the trading card games to boost promotion of the brand and product
• Have working knowledge in games, anime, and popular or internet culture
• Strong team player with excellent interpersonal and communication skills
• Excellent at schedule management and multi-tasking
• Open to work on some weekends/public holidays for Company events
• Open to travel overseas for business trips when required

Interested candidates may send me your updated resume to [email protected]

Samuel

Reg No: R25126753
EA License No: 21C0501

*We regret to inform that only shortlisted candidate will be notified. Thank you.

• Supervise & Lead QA/QC day to day activities including installation and coordination with consultants, main contractors and subcontractors.
• Prepare the ITP by studying project plans and specifications; calculating time requirements; sequencing project elements.
• Controls and implement Quality plan by reviewing material and test specifications, and plan and schedule changes; recommending actions.
• Check, confirm all Quality documents and specifications are complied with company standards.
• Attend the weekly and monthly project meetings to update the status and activity of the project.
• Prepares weekly or monthly project status reports by collecting, analyzing, and summarizing information and trends; recommending actions.
• Manage quality control of all construction and testing of the install facilities, equipment and systems.
• Maintains site Quality Standards by enforcing internal procedures, rules, and regulations.
• Maintains product and company reputation by complying with state and company policy and regulations.
• Contributes to project team effort by accomplishing related results as needed.
• Assist Project Manager in the preparation of project Capex, budget estimation and cost allocation.
• Able to work independently and less supervision required.
• Willing to work late or during weekends when required.
• Attend Toolbox meetings with project team onsite.
• With sound knowledge of process piping installation and equipment installation.
• Able to work with the project team in Piping layouts and design specifications.

Requirements

• Graduate of Bachelor's degree in Mechanical or equivalent engineering education.
• Physically fit to work at a construction site as QA/QC engineer.
• More than 3 yrs experience working on site installation and Greenfield project environment.
• Experience working at process/equipment construction site, plant installation, EPC, or equivalent.
• With experience in generating ITP and specification document
• Ability to read, understand & demonstrate the P&ID and PFD drawings to site work.
• Proficient to read and understand engineering plan drawings like piping and pipe support plan, equipment layout mechanical installation plan.
• Proficient with Microsoft office application and Microsoft project or equivalent and familiar with Google doc
• Familiar with Singapore and international codes /Regulations related piping, construction.

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Manage the overall workflow and performance of the accounting team
• Review and finalize financial statements, including profit and loss, balance sheet, and cash flow statements
• Ensure timely filing of taxes, regulatory submissions, and financial statements
• Act as a key point of contact for client communications, providing exceptional service and resolving any issues or inquiries
• Mentor and develop team members, ensuring high performance and growth
• Ensure compliance with all accounting standards and company policies
• Liaise with auditors, tax agents, and other external parties

Requirement

• Minimum 5 years of experience in accounting or audit

How to apply:

Interested applicants, please click on “Apply Now” or email to “[email protected]”

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Sim Jia Hui

EA Personnel Reg No: R22106242

Our client is a local company in the Service industry. They are looking for a Senior Accountant to assist their team for the next phase of their business. They are located in the East area – easily accessible.

Responsibilities:

• Spearhead budgeting, forecasting, and financial planning activities, ensuring alignment with corporate goals.
• Ensure strict compliance with statutory financial regulations, tax obligations, and accounting principles.
• Assess and secure funding opportunities while maintaining strong relationships with financial institutions, investors, and stakeholders.
• Manage cash flow operations, oversee expenditure control, and deliver precise financial reports.
• Offer financial insights and recommendations to support strategic decisions and propel business growth.
• Work closely with executive leadership to ensure financial strategies complement overall business plans.
• Other ad hoc duties as assigned.

Requirements:

• Minimum Degree in relevant Finance or other relevant field of studies
• IPO knowledge would be advantageous
• Minimum 5 years of relevant Accountant experiences would be advantageous

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R23115674 (Chong Jia Jia)

Responsibilities

• Analyse industry and internal user stories and enhancement requests

• Formulate the relevant test scripts/cases

• Perform UAT planning, design and execution of test cases

• Work with product owners, IT and relevant support/other business units to ensure smooth execution and implementation of test cases

• Log, manage/follow-up with relevant stakeholders on defects and close them

• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures

• Document all test results

• Provide daily status update on UAT progress

Skills/Requirement

 Work experience on banking products like (Securities, Derivatives, structured products, Payments, and corporate actions)

 Able to work with the test and application team(s) to validate the quality of the product delivered to the stakeholders as per project requirement.

 Meet requirement for Tester. Possess experience in the technologies to be tested.

 Familiar with SQL, HP ALM tool, JIRA, Other Test Management Tools.

 Experience in system testing, functional, Integration testing, Regression, manual and E2E testing.

 Good Knowledge on the Order Management System

 Knowledge in SDLC process, Scrum/Agile testing methodology.

Our client has more than 20 restaurants in Singapore that provide various dining concepts that refined tastes of both local and international food enthusiasts.

• In charge of implementing and managing food safety and quality assurance programs across the Central Kitchen and all outlets.
• Perform training in SOPs, food hygiene and food handling techniques.
• Work closely with vendors and contractors on maintenance matters concerning to food safety and QA issues.
• Ensure all SOPs are adhered to at Central Kitchen & outlets

Requirements:

• Diploma in Food Science & Technology or related field
• At least 2 years of QA experience in the F&B industry.
• Meticulous and highly motivated.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Must have minimum 3-6 years of experience in UAT

• Responsible for end-to-end User Acceptance Testing

• Understand the product features

• Create/Formulate Test Cases/Steps

• Check the results of all the test cases/steps

• Experience in handling banking UAT

• Able to write Test scripts/Test plans/Test cases

• Good to have experience in internet banking or consumer banking

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Requirements

• Degree with at least 3 years of working experience in Quality System (preferably in Healthcare, Bio/Pharma, Health Services, biotechnology/biotherapies related industry)
• Good communication skills
• Team player with good coordination
• Meticulous, analytical and systematic
• Candidates with more experience will be considered for a Assistant Manager role

Descriptions

• Maintenance of organization’s quality management system in compliance to:

- regulatory requirements; MOH Healthcare Services Act and other regulatory relevant to the company’s services and products

- accreditation and certification standards; AABB (Association for the Advancement of Blood & Biotherapies), FACT (Foundation for the Accreditation of Cellular Therapy), GDP-MDS SS 620 (Good Distribution Practice for Medical Devices) and other standards when required for the company’s services/products

• Ensure requirements for AABB, FACT as well as MOH license guidelines are implemented and maintained
• Follow up and assist in deviations/ non-conformances (CAPA) for root cause analysis, rectification and process improvement
• Performance of Internal Audits and record checking and support External Audit to ensure compliance with regulatory and accreditation standards.
• Manage the Document Control system for the organization and ensure staff complies with the use of controlled and approved documents.
• Support supplier/ vendor qualification and audits
• Support change control activities
• Responsible for maintaining Quality Systems in the company.
• Responsible for monitoring and reviewing quality indicators and quality control reports across departments.

Job Description

• Industry/ Organization Type: Manufacture of Electrical Power Distribution, Control and Automation Systems
• Position Title: QA Engineer (Electrical Engineering)
• Working Location: Tuas Crescent (Transportation Provided)
• Working Hours: Monday – Friday, 8.15am – 5.45pm
• Salary Package: Up to $3,500 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Conduct inspections on incoming and outgoing parts as per established specifications and procedures.
• Maintain and manage quality records and data accurately.
• Identify quality issues and report them to relevant management for corrective actions.
• Ensure segregation of non-conforming products to prevent mix-ups before final disposition.
• Authorize the rejection of unsatisfactory parts and approve the release of conforming parts for storage and delivery.
• Perform routine tests and checks on switchboards manufactured in the workshop.
• Handle the testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction and addressing any quality complaints or warranty claims.
• Conduct and oversee official tests that may require the presence of surveyors, consultants, or customers.
• Support the QA Manager in fulfilling quality objectives and responsibilities.
• Uphold high standards of cleanliness and organization within the QA Department.
• Adhere strictly to safety protocols during all tasks.
• Ensure all inspection instruments are calibrated and in proper working condition.
• Proactively initiate actions to prevent product non-conformity.
• Recommend and implement solutions to problems identified and verify the effectiveness of these solutions.
• Manage the processing and delivery of non-conforming products until all issues are resolved.
• Follow established Quality Management System procedures to ensure compliance and control.
• Perform additional duties as assigned by supervisors.

APPLY NOW!!!

• Minimum Diploma in Electrical Engineering or a related field.
• At least 1 year of experience in quality control or assurance, preferably in electrical or switchboard manufacturing.
• Ability to interpret technical documents and adherence to safety and quality standards.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72150 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• REs shall provide standing supervision of all civil and structural works to ensure compliance with the following authorities' requirements:
• The inspection of the bus depot involves the demolition and removal of the existing Pasir Panjang Distripark. Following this, the construction will take place for main depot building, dormitory and administration office.
• Knowledge of construction methods, materials, and safety protocols
• Supervise and monitoring of contractors’ work to ensure they are carried out in accordance with the provision in the contract document.
• To monitor the progress and assist SRE/QP on structural inspection on all Structural works according to the approved drawings issued.
• To review and supervise safety, environmental and health matters.
• Review and comment on contractor's submissions.

Job Requirements

• The RE shall have minimum three (4) years of experience as a civil engineer; and have least two (2) years shall be in supervision of works similar in nature to the Works in the Civil Contract.
• All RE shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.

Work During Office hour

Monday to Friday: 8:30 a.m. to 5:30 p.m.

Saturday: 8:30 a.m. to 12:30 p.m. (Willing to work on rotation shifts)

Sunday and Public Holiday: 00:00 hours onwards or otherwise advised by project officer depending on LTA’s contractor work schedule.

Contract: 6 or 12 months contract

Location: Eunos

Working hours: Mon - Fri (9am - 6pm)

Job Purpose

Support the implementation of a variety of digitalization initiatives under Digital Customers Platform that meet customer, business and operation’s needs.

Job Responsibilities

• Conduct testing on web and mobile applications to ensure functionality, performance and user experience meet quality standards.
• Develop test plans, test cases and test scripts based on project requirements
• Execute test cases and document test results for analysis
• Identify and report software defects, track issues and work with the development for the fixes.
• Perform regression testing to ensure that previously developed and tested application still performs as expected
• Provide input and feedback on application usability and user interface design
• Participate in the improvement of testing processes, tools and methodologies
• Takes accountability in considering business and regulatory compliance risks and takes appropriate steps to mitigate the risks.
• Maintains awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company.
• Highlights any potential concerns /risks and proactively shares best risk management practices.

Job Requirements

• Degree in Business, Business Information Technology, Computer Science, Engineering or similar areas
• Added advantage for individual who has experience in mobile application or web application for customers.
• Knowledge of emerging technologies/platforms in Mobility, Analytics, Cloud and Social with a strong self-initiative to keep up with Digital trends.
• Strong understanding of application testing methodologies, tools and processes
• Excellent problem investigation skills and attention to details
• Good communication skills for effectively collaborating with team members
• Worked with Agile delivery methodologies.
• Working experience in a financial services industry and/or operating under strict regulatory constraints is an advantage.
• Ability to work independently as well as part of a team
• Experience in application testing or quality assurance roles
• High level of integrity, takes accountability of work and good attitude over teamwork.
• Takes initiative to improve current state of things and adaptable to embrace new changes.

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

https://sg.go.persolkelly.com/job/apply/10494

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394 • Reg No: R23117066 (CHEW KIA ZHENG)

NDT Inspector (Trainee)

• Salary: S$ 2,000 - 2,500
• Location: Clementi
• Working days: 5 days, Mondays to Fridays: 8:30am to 6pm

Transport:

We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.

Job scopes

• To conduct NDE services (MT)
• To conduct NDE services (Eddy Current)
• To provide technical assistance / guidance to other inspectors
• Respond to technical queries either by client / in-house in relation to lifting equipment, load-testing and inspection services
• To lead team in project specific work
• To be main liaison with person-in-charge at customer premises
• To be liaison with classification surveyor
• To prepare specific job safety analysis for project specific work
• To prepare and issue reports for all related inspection work
• To prepare work procedure for project specific work
• To provide technical analysis to inspection related work / results
• Any other ad hoc duties as and when assigned

Requirements:

• Minimum GCE O Level
• Minimum 1 years’ experience in relevant area

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Our Client is a Singapore based company in Medical Devices. Due to business needs, they are now recruiting a QC Supervisor to be part of their Quality team for ongoing transformation projects. They are located at West.

Duties:

• Guide and coach lab technicians.
• Inspect raw materials and conduct analyses on WIP and finished product samples.
• Support QA in failure analysis, corrective actions, and customer complaints.
• Assist with GMP audits, validations, and maintaining quality and technical files.
• Prepare technical reports, standards, and specifications for processes and products.

Requirements

• Minimum Diploma in Chemical/ Biotechnology or related field
• Possess supervisory experience in leading a team of technicians

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Mon to Fri 8.30am - 5.30pm

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Position Summary

This position play a critical role in driving compliance and quality programs for Healthcare Transportation & Facilities and supporting the Healthcare Quality Management System to ensure processes and systems are compliant with regional and local regulations and customer requirements.

Job Scope

1. Quality Policies & Procedures: Determine, implement & promote policies and procedures for company’s Network and facilities (hubs & stations) to ensure compliance to standards such as GDP, GCP and others.

2. Quality Assessment & Standards: Write & review SOPs and Work Instructions for transportation & fulfilment solutions pertaining to the healthcare industry.

3. Compliance & Quality Program Management: Implement compliance and quality programs to support local Quality teams to ensure they are kept up-to-date and prepared.

4. CAPA Process Management: Lead in process creation and review of documentation on the implementation and responses to corrective and preventive actions (CAPAs) and monitor action progress until closure.

5. Healthcare Quality Management System: Develop, implement & support the system and processes, develop corresponding training programs, and acts as Super User for eQMS system.

6. Internal Audit Programs: Design & implement robust internal audit processes to ensure readiness of various functions & processes when meeting regulatory agencies & customer audits.

7. Certification Audits: Lead various certification audits with relevant regulatory agencies and certification providers across the region.

8. Operations & Customer Audit Programs: Lead & prepare for regular audit programs / random checks / regulatory activities to achieve successful audit outcomes and proper post audit follow up actions.

9. Healthcare Customer Liaison: Liaise with customers to understand quality requirements / issues / underlying concerns to advise on the way forward, provide advice based on interpretations as applicable to 3PL and resolve issues via conducting root cause analysis.

10. Healthcare Quality Feedback: Liaise, consolidate feedback from different functions to update and prepare final copy for Quality Questionnaires, Agreements and RFQ Proposals for customers.

11. Validation Programs: Lead the validation of transportation lanes and critical equipment like cold chain facilities, and packaging systems.

12. Depot Support: Provide secondary / backup support to healthcare specialists for market depots.

Requirements :

1. Hold local pharmacist license

2. Have at least five (5) years of relevant experience in warehouse, quality + QMS for pharmaceutical / healthcare industry

3. Have competencies in quality assurance / regulatory affairs, customer relationship management and root cause analysis

4. Have working experience ensuring compliance in accordance to Goods Manufacturing Practise cGMP,)/, Good Clinical Practises cGCP, Goods Distribution Practice (GDP) & ISO13485 for Medical Devices, IATA CEIV and other local certifications in a warehouse and transportation business.

5. Experience in conducting external and internal audits for regions

6. Must hold at least Bachelor’s degree in Pharmacy from a reputable local or Australia’s institute.

7. This position require to communicate with counter part in China

8. Occasionally travel is required to sites and region warehouses.

Competency

1. Accuracy & attention to detail which is crucial to proper compliance to regulatory and standards

2. Problem-solving skills to support customer issue resolution

3. Planning & organization skills to ensure proper audit programs are managed effectively

4. Communication skills to facilitate engagements with customer and regulatory agencies

5. Project management capabilities and familiarity with Process Mapping, Six Sigma, Lean Methodology, Agile or Design Thinking

6. Apply data-driven decision making with the use of data analytics and visualization tools like Power BI and competency in Microsoft Office applications like Excel, Word, and PowerPoint

Mon to Fri 8.30am - 6pm

⇒ Role Summary

We are seeking a highly skilled and motivated JAVA Backend QA Automation Tester to join our dynamic team. The ideal candidate will be responsible for ensuring the quality and reliability of our backend systems through automated testing.

⇒ Main Responsibilities

• Develop, maintain, and execute automated test scripts for backend systems using Java.
• Collaborate with developers and other QA team members to design and implement test plans, test cases, and test scripts.
• Identify, document, and track bugs and issues found during testing.
• Perform regression, integration, and performance testing of backend services.
• Utilize automation frameworks and tools such as Selenium, TestNG, JUnit, and REST Assured.
• Contribute to the continuous improvement of the QA process, tools, and methodologies.
• Participate in code reviews and provide feedback to ensure testability and quality of code.
• Work closely with cross-functional teams to understand requirements and provide input on testability and quality.
• Ensure compliance with industry standards and best practices.

⇒ Qualifications & Experience

• Strong knowledge on JAVA programming.
• Proven experience in backend testing and automation using Java.
• Strong understanding of software development life cycle (SDLC) and QA methodologies.
• Proficiency in automation tools such as Selenium, TestNG, JUnit, and REST Assured.
• Experience with API testing and tools like Postman or SoapUI.
• Familiarity with version control systems like Git.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• Ability to work independently and in a team-oriented environment.
• Testing certifications (ISTQB) is a plus.

⇒ Transversal Skills

• Effective listening, communication and presentation skills.
• Strong ability to analyze and solve problems and/or suggest solutions.
• Strong appetite for non-stop learning.
• Dynamic, proactive, sense of initiative.
• Interpersonal skills to work with various cross functional teams.
• Ability to work independently and/or prioritize tasks in fast paced environment.

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage