Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

[Order Number: 830450]

Mon-Fri, 9:00 - 18:00

Hybrid Working Arrangement

Familiar with Data security/Data protection

Responsibilities

• To conduct compliance check for functions involving Post-IA, Job Placement, Job Retention and offload checks to ensure that all procedures are complied
• To conduct historical data and referral report compliance check
• To maintain and submit Quality Assurance Reports
• Creating and updating Standard Operating Procedures.
• Involved in Committee Meetings with external partners, comfortable in taking minutes.
• To review established work procedures (workflow) with the aim to improve overall processes.
• Assist in system updating of client’s records.
• Involved in ad-hoc projects/task assigned by superior

Requirements

• Candidate must possess at least a Diploma
• Candidate must have at least 2 years of experience in data auditing & data compliance

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Lim Lai Xin

EA Personnel Reg. no.: R2197913

EA License no.: 07C5771

We are partnered with an established organisation to look for a Test Automation Engineer on a permanent basis.

Responsibilities:

• Automation Design & Development: Creating automation designs and scripts to test product functionality.
• SDLC Participation & Collaboration: End-to-end testing and Interfacing with a diverse range of IT stakeholders (vendors, developers, business analysts, project managers, etc.).
• Test Planning & Execution: executing tests across various domains (systems, networks, applications, etc.).
• Continuous Improvement: Evaluating, maintaining, and improving automation systems for efficiency and effectiveness.
• User Acceptance Testing: Emphasizes documenting processes for ease of future modifications, assisting with User Acceptance Testing (UAT)

Responsibilities:

• Bachelor's Degree in Computer Science / Computer Engineering or equivalent
• At least 6 years of experience in Automation Engineering with a solid understanding of Testing Methodologies, frameworks and SDLC.
• Proficiency in Java, VBScript and automated scripts
• Experience working in an agile environment

Due to the urgency of this role, we are only considering candidates with existing working rights in Singapore.

If you are keen on this role and meet the qualifications, apply now or send your cv to [email protected]. We will arrange for a confidential chat if your profile aligns.

If you do not hear from us within 2 working days, please take this as a notification that you have not been shortlisted.

Suntec City

Hybrid Work Arrangement (4 days WIO, 1 day WFH)

8am to 5pm / 9am to 6pm (Mon-Fri)

Job Responsibilities

• Adhere to the sanction check requirements and maintain proper, accurate and complete records of the checks made.
• Assist the Business Divisions in ensuring all required sanction checks are conducted with no breaches in the branch’s policies and service standards.
• Support Director in control owner of sanction policies and effective implementation.
• Support Director in undertaking regular reviews of sanction procedures and recommend/implement modification where appropriate to ensure that any business risks are mitigated to the maximum extent possible.
• Inculcating strong risk culture within the Singapore operations.
• Ensuring the branch keeps up with sanction regulatory updates and implementation.
• Other ad hoc duties assigned

Requirement

• Prior experience in insurance admin/ operations is required

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Summary Benefit:

• Salary range: $2000-$2800
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Summary Benefit:

• Salary range: $2000-$2500 + OT
• Location: Tai Seng (Semicon - Cable, Harness)
• Mon to Fri, Office hours
• MNC with great career progression

Responsibilities :

• Conduct incoming inspections and first article checks on raw materials and components based on written procedures and specifications.
• Oversee the calibration system for instruments, including documentation and procedures.
• Use advanced methods like Six Sigma and SPC to develop effective, maintainable quality systems.
• Operate various hand tools and machines such as screwdrivers, soldering irons, and crimpers.
• Oversee and maintain the quality assurance laboratory and support internal and supplier audits.
• Ensure timely completion of inspection requirements, create necessary certifications, and meet daily quality targets.

Requirements :

• Able to read CAD drawings

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Our Client is a Singapore based company in Medical Devices. Due to business needs, they are now recruiting a QC Supervisor to be part of their Quality team for ongoing transformation projects. They are located at West.

Duties:

• Guide and coach lab technicians.
• Inspect raw materials and conduct analyses on WIP and finished product samples.
• Support QA in failure analysis, corrective actions, and customer complaints.
• Assist with GMP audits, validations, and maintaining quality and technical files.
• Prepare technical reports, standards, and specifications for processes and products.

Requirements

• Minimum Diploma in Chemical/ Biotechnology or related field
• Possess supervisory experience in leading a team of technicians

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Information:

• Salary: $2400 - $2800 Basic
• Attendance: $40
• Normal working hours: Mon-Fri, 8am-5pm
• Company transport at various location in the west

Responsibilities:

• Perform sampling incoming quality inspection
• Perform using equipment such as Vernier Caliper, Micrometer, Guages, Profile Projector and Smart Scope

Requirements:

• ITE/Diploma in Engineering
• Entry level

Interested applicants, send in your updated resume by clicking “Apply Now”.

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Overview: -

• 5 Days work per week (Monday to Friday), 8.45am to 5.45pm
• Monthly base salary: SGD 3,200 - SGD 4,400
• AWS (13th Month) + Variable Bonus
• Kaki Bukit

Your Responsibilities: -

• Supervise testing methods and maintain high-quality standards for all processes.
• Ensure compliance with safety regulations and maintain equipment to the highest standards.
• Plan Annual Inspections, Full Load Tests, and 150% Brake Tests.
• Develop and establish standards for conducting inspections and tests on all procedures.
• Manage daily schedules and manpower deployment.
• Coordinate with internal and external stakeholders regarding planned inspection schedules and follow-up.
• Address client concerns and resolve issues.
• Ensure inspections are completed according to schedule.
• Assist employees in understanding quality standards and ensure compliance with all quality manuals and procedures.

Requirements: -

• At least 5 years of relevant experience in the industry.
• Diploma in Mechanical/Electrical/Electronic or a Technical Certificate from an accredited Technical Institute.

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis and will be seconded to our client's project*

Work Location: Tuas (company transport is provided in selected MRT stations)

Working days: 5.5 days

About the role:

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large-scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large-scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

· To work as owner’s engineer to lead the ICA project implementation at site.

· Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.

· Project delivery planning including time and manpower scheduling.

· Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline

· Strong capability of specification capability for all ICA-related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.

· Enforce Specifications, International Standards, Singapore Standards and good practices

· In-depth of understanding for automation package for contract implementation of automation systems for WtE project.

· Contracts management of ICA discipline for the WtE project

· Review the EICA submittals from Contractors for Process like Waste Reception system, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS, PFMS etc.

· Essential understanding of P&ID of process engineering

· Liase with the Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings

· Engage in Technical discussion EICA related issues with the contractor and client

· Attend site meetings and resolve technical issues with Contractors

· Define Inspection and Special testing requirements and ensure coordination of those efforts on all contracts

· Ensure the documentation fully complies with the specifications and standards

· Participate in HAZOP review, SIL safety and design for safety workshops

· Work with electrical team closely for all power and process interfaces

· Participation in FAT of automation equipment, DCS, PMS, PLC and RIO

· Provide Technical support in Testing and Commissioning of the plant.

About you:

· Degree in Electrical / Electronic/Instrumentation & Control Engineering recognized by the Professional Engineers Board

· Registered as Resident Engineer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore

· At least 10 years of relevant experience in design and construction of large Waste-to-Energy (WTE) projects or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA Licence Number: 94C3545

EA Personnel Name: Paola Jane Ofrasio Fajardo

EAP Personnel Registration Number: R1325507

The Healthcare Quality Assurance (QA) Associate Manager communicates the quality policy and objectives to help ensure the maintenance of the overall healthcare compliance for the operation/department. He/She reviews global standard operating procedures (SOPs), reviews and approves client and facility work instructions, trains QA personnel and internal clients on SOPs and regulatory topics, and oversees the maintenance of the quality management system. This position participates in internal, client, and agency audits, and follows up on audit outcomes. He/She maintains knowledge of healthcare quality and regulatory requirements and assesses and addresses risks associated with changes as well as transporting healthcare products. This position oversees multiple facilities and supervises specialists.

Responsibilities

Interfaces with Internal Groups, Clients, and Agencies

• Consults with internal groups (e.g., Operations, Building and System Engineering, Business Development, IT, etc.) and investigates and resolves healthcare issues to ensure compliance with rules and regulations.
• Assists with internal groups (e.g. Business Development, Solutions and Implementation, Operations, IT, etc.) to review new business opportunities to advise on certification and licensing requirements to be in compliance with ever changing local regulations and global SOP.
• Reviews policies, procedures, and regulations with clients to determine specialized requirements and ensure compliance.
• Interfaces with client QA departments and attends sales presentations and business reviews to support the coordination of client activities.
• Participates in regulatory agency interactions to interpret rules and regulations.
• Assists in agency follow-ups after inspections and discovery of internal issues to meet respective agency requirements.
• Follows up with clients after audits to identify issues and mutually acceptable solutions.

Maintains Quality Documents and Procedures

• Writes and revises global standard operating procedures (SOPs) and performs random process adherence audits to ensure adherence to global and client specific processes.
• Establish and maintain postponement activities (e.g. kitting, labelling, bundling, repackaging etc)
• Assists in coordinating document and data control (e.g., numbering, version control, controlled copies, etc.) to ensure documentation and data meet quality standards and are orderly maintained.
• Establishes and maintains quality policies and programs to ensure proper document and data control methods are utilized.
• Assists in interfacing with Corporate Compliance and evaluates procedures across locations to ensure no overlaps and gaps in procedures and guidelines and consistency in content and implementation exist.
• Suggests quality improvements to SOPs, operational/department procedures, and client work instructions to ensure quality standards are maintained.
• Reviews and approves client specific work instructions to ensure consistency and compliance with applicable regulations and UPS quality standards.
• Provides recommendations for changes to work instructions as necessary to accurately reflect regulations and UPS quality standards.

Supervises And Develops Others

• Determines employees’ training needs to produce continuous development plans.
• Provides on-going feedback and support to improve performance.
• Conducts performance evaluations in a consistent, fair, and objective manner to encourage continuous performance improvement.
• Holds others accountable to established performance levels to achieve individual and group goals.
• Resolves individual and group performance issues in accordance with UPS’s policies and procedures in a timely manner to motivate and foster teamwork.

Manages and Executes Quality System Training Program

• Identifies any necessary and applicable Quality System requirements to ensure appropriate training content.
• Performs necessary Good Manufacturing Practices (GMP)/Good Distribution Practices (GDP) and SOP training to ensure appropriate level of compliance is maintained in the operations/department.
• Identifies and approves all qualified trainers to ensure training quality.
• Assists in the development and maintenance of all necessary training material to ensure quality and accuracy of content.
• Oversees the tracking and reporting of required employee training for the facility/department to ensure compliance.

Conducts and Oversees Internal and External Audit Programs

• Participates in information gathering and scheduling and prepares and distributes reports to prepare for internal and client audits.
• Performs internal audits, interacts with internal auditees, and records information and observations to track and trend audit findings, take corrective and preventative action, and maintain proof of audits and documentation.
• Hosts and responds to Corporate Compliance and agency audits to identify and conduct follow-up activities.

Requirements:

• Possess a Degree in Science or Life Sciences related
• Need to be a license Pharmacist and willing to be a license holder for SG Healthcare facilities
• Brings along at least 5 years of work experience in pharmaceutical/medical device logistics related field
• Good interpersonal skills with the attributes of a team player and a keen eye for details
• Ability to collaborate and work effectively with a variety of stakeholders
• Able to travel occasionally to APAC countries
• This position is based in the West (1 Gul Circle).

What you’ll do

• Manage clinical quality reporting staff through end-to-end clinical quality data ingestion/exchange, storage/maintenance, security, project management, strategic planning, reporting, and analyses.
• Oversee quality and integrity of processes, data, and systems by serving as a subject matter expert on health information technology systems.
• Develop, maintain, and govern an accurate and complete directory of available clinical quality data, resources, reports, dashboards, and analyses.
• Collaborate across the organization to monitor and maintain the plan’s compliance with MOH standards and alternative payment model contractual arrangements.
• Develop and maintain strong collaborative relationships with providers, MOH, health information networks, vendors, and internal population health stakeholders to ensure health data is accurate and complete and outcomes are met related to quality.
• Responsible for team that conducts in-depth analyses to identify gaps in care across all lines of business to assist care coordinators in provider and member outreach for quality improvement.
• Collaborate with auditor, vendors, senior management, ITS, quality management, and other relevant stakeholders to plan for and ensure timely availability of data needed for audits, reports, applications, organizational metrics, and planning.
• Oversee training, processes, and access related to patient records, supplemental data, measures, supporting applications, and educational materials.
• Provide continuous monitoring and goal setting for clinical quality measures and supplemental data to assist in population health initiatives and improved quality metric performance.
• Participate in regular quality meetings with organizational leadership to evaluate metrics and identify and remove barriers to improving quality metrics across all lines of business.

What you need

• Min Bachelor’s degree with major in health informatics, health administration, public health, business administration or related field.
• Requires proven leadership skills and experience.

Bonus if you have

• Post-graduate degree in health informatics, health administration, public health, public administration, or related field.
• Previous project management experience.

If you are interested in the position, do kindly drop your most updated resume to [email protected]

Thank You.

Leon Leong De Cong
R1551708
Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Responsibilities (include but are not limited to):

· Work with the Manufacturing department as a production area Quality Assurance representative

· Coordinate and facilitate Quality Assurance related production and production related activities

· Ensure timely issuance of production records, procedures and labels

· Ensure timely assessment and closure of discrepancies, Deviations and Change Controls

· Review batch-related documentation, and ensure resolution of issues to release product

· Communicate lot disposition pending issues to Management

· Ensure approval and timely delivery of Final Product

· Ensure that products are manufactured in compliance with regulatory and GMP guidelines

· Review and approve Manufacturing and Validation documents for Regulatory and Kite compliance

· Review and approve Manufacturing Production Records

· Compile and verify all batch related documents into a Final Product lot disposition package

· Provide Quality Assurance support resolving material, in-process product, final product, environmental, facility and equipment manufacturing issues

· Review and disposition disposable raw materials and components for GMP use

· Review equipment and facility technical and investigation reports

· Review and approve proposed changes to systems, procedures, methods, and submissions to regulatory agencies

· Gather metric information for use in continuous improvement of areas of responsibility. Report to management as needed.

· Perform other duties as required

Requirements:

• Min Diploma / Degree in Chemical Process Technology, Foodscience, Biotechlonogy, Biology, Biomedical Sciences, Science or its equivalents
• No Experience Needed, Full training/ on the job guidance will be provided
• Able to start immediately

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected] (Attn: QA Specialist)

Thank You.

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Summary :

• Basic $2000 to $3600
• 5 days, office hour
• West/ Central
• Company with good progression

Job Scope:

• Monitor and manage outstanding accounts receivable.
• Follow up with clients to ensure timely payments.
• Evaluate and approve customer credit applications based on company policies.
• Set appropriate credit limits for customers.
• Reconcile customer accounts and resolve discrepancies promptly.
• Maintain accurate records of all payment activities
• Ensure adherence to company credit policies and procedures.
• Initiate legal or collection actions for long-overdue accounts if necessary.

Requirements:

• Degree or diploma or professional studies with accounting background
• Competent in Microsoft office application
• Ability to establish and maintain good client relationships, both internally and externally at all levels
• Strong understanding of credit risk assessment and collections processes

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Cheang Wei Yang (R21102313)

Production Operator/ QC Operator/ QC Technician/ QC Inspector

Job Highlights

3 Shifts available to choose:

• Morning Shift: Mon - Fri 7am - 3pm / Sat: 7am -1pm
• Afternoon Shift: Mon - Fri 3pm - 11pm / Sat: 1pm- 7pm
• Night Shift: Mon - Fri 11pm - 7am
• Pls indicate your Shift preference and Current and Expected salary in your CV.

• Permanent Position / MNC
• Vacancies X 3
• Location: Near Woodlands MRT
• AWS , Annual Leave, Medical Benefit
• Attendance Allowance + Shift Allowance + Lots of OT to earn + Good Basic salary
• Training will be provided

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Perform daily inspection task as designated by the supervisor
• Perform in-process inspection and report abnormality/raise NCMR if applicable
• Carry out productions works according to tasks assigned.
• Checking and sorting product produced as and when required to ensure quality products are produced.
• Report any quality problem to immediate superior immediately.
• Rework the product as required according to instruction when required.
• Ensure quality parts are produced and production target are met.

Requirements:

• Secondary school education and understand simple English.
• Relevant working experience in manufacturing industry or equivalent will be an added advantage
• Able to support OT

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a QA Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Ensuring that corrective measures and deviations meet with the standards
• Responsible for the creating and executing methods and procedures for whole process of production equipment (e.g. the inspection, testing, and evaluation of the products).

Requirements

• Min Diploma/Degree in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Duties & Responsibilities:

• Maintain and upkeep production/training/safety-related documentation.
• Maintain and upkeep receiving records/documents and request COAs from vendors.
• Coordinate with QA/QC department to ensure operation complies with food safety (e.g., FSSC/ISO) and all regulatory requirements (e.g., SFA).
• Ensure the retention samples arrangement, e.g., get from production, retention area arrangement, arrange to an external laboratory, and submit the analysis to QA for review.
• Assist in ensuring the products are traceable.
• Ensure production efficiency with minimal wastage.
• Assist in monthly pest control services.
• conduct daily inspection on receiving on raw materials, production, deliveries regulatory requirement add Halal
• Asist in food safety internal audit, customer audit, FSSC/ISO audit.
• Supporting in any ad-hoc duties as assigned by management from time to time.

Requirements:

• Minimum Diploma in Applied Science (Nutrition and Food Science) or related fields
• Basic food hygiene certification is an added advantage
• Minimum 1-year relevant working experience in food manufacturing
• Good interpersonal and communication abilities.
• Proficient in MS office e.g., Word, and Excel.

Working Hours:

• Monday to Friday – 8.30 am to 5.30 pm
• Saturday – 8.30 am to 12.00 pm

Transport provided from Kranji MRT Station

Lunch is provided in-house.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Candidates are required to:

• Supervise, monitor, document and enforce factory workers’ hygiene and critical control points of production
• Assist in factory audits
• Handle any employee misconduct or issues relating to food safety and hygiene
• Maintain records and food safety standards
• Handle administrative tasks such as placing orders for factory supplies related to Quality Control and sending samples for lab tests
• Liaise with suppliers and customers relating to quality matters and documentation
• Conduct training for workers

Working hours: 8am - 6pm (Monday - Friday)

Candidates should possess the following skills/knowledge:

• Basic knowledge of food hygiene
• Relevant education in Food Science
• Competent knowledge in Word, Powerpoint and Excel
• Good understanding of GMP, HACCP and ISO22000

Knowledge in FSSC 22000/working in an FSSC 22000 environment is an advantage.

• Remuneration package: Up to $5,800 Basic + AWS + Variable Bonus

• Working location: Woodlands

• Over 30 years of Reputable Automation Engineering Company

Responsibilities

• Provide a key role in the design, development & testing of industrial robotic machines & equipment
• Responsible for producing schematic drawings, creating electrical control systems, ensuring proper setup & tunning of control systems, & sourcing of control components

Requirement

• Diploma or Degree in Electrical Engineer or related
• Experience in designing & implementing of electrical control system

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Benefits Summary:

• Up $3600 + Bonus + Benefits
• 5 Days work week
• Working Location: Central
• MNC with good working environment

Responsibilities:

• Following up payments as needed and ensuring timely payment of debts
• Liaise with lawyer to follow up on legal action and vehicle re-possessors to collect back the vehicles
• Taking a proactive role in managing and collecting debts of clients
• Responding to relevant client enquiries and resolving the outstanding balance
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Alternatively, you may also email your resume to us at [email protected].

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Edward TOH
Registration No: R1658602
EA License No: 20C0278