Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

DxD Hub QA/Lab Operations Team is seeking candidate to join the team to build capabilities needed for lab operation in medical device organization.

You will join the QA and Lab Operations team to implement QMS requirement and laboratory safety protocols in the management of equipment, facilities and inventory within the product development laboratory.

You will be trained in the following areas:

Competency in ISO 13485:2016

• Understanding concept of ISO 13485:2016 standard and the impact of the requirements on lab operations.
• Management of Change.
• Management of deviation and nonconformity.
• CAPA and root cause analysis.

Workplace Safety, Health and Environment

• Application of safe work procedures in work activities.
• Workplace safety incident investigation.
• Proper classification, handling, storage and disposal of lab chemicals including toxic, corrosive, flammable chemicals.
• Proper handling, storage and disposal of biological materials.
• Emergency response.

Facility Management

• Regulatory requirement for lab operations.
• Regulatory guideline for waste management.

Equipment Maintenance

• Understand the purpose of equipment calibration.
• Understand concept of accuracy and tolerance in calibration results.

Equipment Qualification

• Understand the principles of equipment qualification.
• Writing qualification protocol and report.
• Execute basic installation and operations qualification protocols.

You will support the QA and lab operations team in the following:

• Receiving and inspection of material and equipment.
• Equipment qualification: develop qualification protocol/report, plan for qualification activities.
• Support in maintenance of lab facility compliant to ISO 13485 and regulatory requirement.
• Review/drafting of SOP.
• Participate in audit.
• Record NCR and conduct CAPA process.
• Participate in lab improvement project.
• Cross division activities on adhoc basis.

Job Requirements

• Bachelor of Science or Engineering with knowledge in engineering science.
• Working knowledge in Microsoft office.
• Good communication and presentation skill.
• Individual who is highly motivated, results driven and well organized.
• Possess intellectual agility and a strong team player.
• Applicants with no experience may apply.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

KEY RESULT AREAS (KRA)

1. Inspect quality control of products and services to meet company and customers’ expectations.

• Inspect QA/QC and prepare proper documentation for incoming materials, fabrication, and production

and site installation

• Conduct QC inspection for façade works

• Prepare QC inspection documents and procedures for certification

• Execute QC inspection duties according to schedule in a timely and correct manner

• Perform QC inspection using proper checking tools as assigned

• Conduct QC inspection using work checklist and test plan as assigned

• Support in the inspection and implementation of QMS and audit, including ISO

• Prepare proper documentation and file QC inspection documents

2. Inspect quality of products and services provided by suppliers and vendors.

• Inspect products and services provided by suppliers and vendors

• Conduct QC on key material supplies such as aluminium, extrusions and glass

• Analyse prototypes provided by suppliers and vendors

• Maintain QC information of supplies in QA/QC Systems and Inspection Records

3. Perform stringent inspection to attain highQA/QC in manufacturing and installation processes and methods.

• Inspect manufacturing and installation processes and methods

• Perform method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

• Conduct QC field testing and maintain records

EDUCATIONAL QUALIFICATIONS

• Certificate/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 2–4 years of QA/QC working experience in façade industry with basic knowledge in

product specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality

• Familiar with ISO 9001, 14001 and 45001

• Familiarity with Construction Quality Assessment System (CONQUAS) will be an added

advantage

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Collaborative

• Effective communication skills

• Conscientious

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

To carry out inspection of client properties including returned properties and all follow-up actions to monitor and report compliance with requirements provided by Client and that the premises do not infringe authorities’ requirements, including but not limited to:

a)Non-compliance to statutory requirements, e.g.

- Unapproved building works and any additions/alterations,

- Fire Safety Hazards,

- Unapproved usage or change of usage of premises,

- Illegal activities in premises e.g. illegal dumping, gambling, etc,

- Unapproved worker’s dormitory;

- Unapproved sales of diesel;

b) Unapproved subletting;

c) Encroachment;

d) Poor Maintenance/Housekeeping; and

e) Unauthorised reclamation.

Working Timing : 8.30 AM to 6.00 PM

Working Location: Island Wide

Requirements

Must be qualified with a Diploma in any discipline.

Must be certified Fire Safety Manager (FSM).

Must have own vehicle.

Must have work experience in a facility management role.

Key Result Areas:

1. Manage the quality assurance and control of products and services to meet company and customers’ expectations.

Monitor QA/QC and proper documentation for incoming materials, fabrication, and production for

overseas projects

• Prepare inspection and test plans for façade works (Chart H)

• Prepare documents and procedures for inspection/certification

• Implement schedule to ensure QC Inspectors carry out their duties timely and correctly

• Assign proper checking tools for QC Inspectors

• Identify training opportunities for QC Inspectors to attain qualification and upgrade in their jobs

• Assign work checklist and test plan to QC Inspectors

• Organize and implement QMS and audit, including ISO

• Inspect the proper documentation and filing of QA/QC documents

• Search for source information related to QA/QC matters

2. Ensure the quality of products and services provided by suppliers and vendors

Analyse products and services provided by suppliers and vendors

• Inspect key material supplies such as aluminium, extrusions and glass

• Examine prototypes provided by suppliers and vendors

• Supervise the information of supplies in QA/QC systems and inspection records.

3. Attain high QA/QC in manufacturing and installation processes and methods.

• Analyse manufacturing and installation processes and methods

• Inspect method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

EDUCATIONAL QUALIFICATIONS

•General education/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 5 years of working experience in façade industry with good knowledge in product

specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality.

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Decisive

• Collaborative

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Description

Join our dynamic team at Micron, where we are dedicated to driving outstanding quality, compliance, and governance in our human resources practices. Based out of Asia, this role offers an outstanding opportunity to lead and innovate within a world-class organization renowned for its dedication to excellence.

As the Quality, Compliance and Governance Senior Manager for People Organization, you will lead a team of highly skilled professionals and play a pivotal role in ensuring our HR operations strictly adhere to the highest standards in compliance and governance with respect to industry standards and regulations. You will assume the role of HR System Level Process Owner (SLPO), serving as the primary actor accountable for the system level process operations and governance.

Your work will be instrumental in maintaining flawless compliance and governance, contributing significantly to our ambitious goals.

Responsibilities:

• Build and develop a high-performing team that effectively manages and supports Quality Management System, RBA Labor Compliance, and Governance in People Organization.
• Review, evaluate, and maintain all process controls to meet Quality Audits and RBA Labor compliance requirements.
• Collaborate with various departments including Global Quality and Site Process Coordinators in People Organization to successfully implement controls and monitoring systems for Quality Management System.
• Support various audits such as ISO/IATF, ISO 27001 and Micron’s internal audits.
• Develop strategies, tools and methodologies to ensure Micron manufacturing sites comply with RBA Labor requirements.
• Perform detailed audits, including RBA internal assessments and due diligence audits on recruiting agents and suppliers to assess and improve RBA compliance levels.
• Promote the use of standard methodologies for compliance and risk management, while also providing education on these practices.
• Coordinate human capital public disclosures, record management, and policy management within People Organization.
• Conduct Business Process Reviews with key People Organization stakeholders
• Develop a system to manage and support employment contract requests from various People Organization Teams and be the point of contact working with Legal team
• Implement and sustain People Data Security process to ensure People Team utilizes secure data sharing mechanisms when exchanging sensitive information with vendors.
• Support the People Org Business Information Security Officer (BISO) in identifying, assessing, and mitigating security risks within People Organization.

Education and Experience:

• Bachelor’s degree in Human Resources, Business Administration, or a related field.
• A minimum of 5 years of experience in quality assurance, compliance, or governance roles.
• At least 5 years leading a team
• Extensive experience in ISO, IATF, RBA audits or related Quality and Labor Standards Audits.
• Professional certifications in quality management or compliance would be advantageous.

Qualifications & Skills:

• Proven experience in quality assurance, compliance, and audit management, preferably within an HR context.
• Remarkable skill in managing and conducting comprehensive internal and external audits.
• Strong collaboration skills to work effectively with cross-functional teams.
• Demonstrated ability to implement and monitor quality and compliance controls successfully.
• Excellent communication and leadership skills to promote a culture of excellence and continuous improvement.
• Outstanding organizational skills to efficiently manage multiple projects and deadlines.

Job Title: QC Technician (ID3445)
Location: Kallang
Working Hours: Mon-Fri 8:30am- 6:00pm.
Salary: $2500-$3000

Job Descriptions :
• Conduct detailed inspections of raw materials, components and finished products to ensure products meet quality specifications and standards.
• Records and analyzes test data and inspection results.
• Prepare detailed reports to document findings, deviations, and corrective actions.
• Assist in the development and implementation of quality control policies, procedures, and guidelines.
• Ensure compliance with company quality standards and industry regulations.
• Detect and identify defects, deviations, and non-conformities in products or processes
• Recommend corrective actions and participate in root cause analysis.
• Work closely with production staff to address and resolve quality issues.
• Provide training and guidance on quality standards and procedures to production personnel.
• Communicate any quality control issues to superior.
• Recommend and implement solutions to improve product quality.

Job Requirements:
• At least 2 years of experience in semiconductor industry with quality check experience.
• Experience in quality control or quality assurance in manufacturing or production environments.
• Strong attention to detail and analytical skills
• Familiarity with quality control tools, techniques, and equipment.
• Excellent documentation and communication skills.
• Ability to work independently and as part of a team.
• Proficiency in using computer software for data entry and analysis.

Job Description and Summary

We believe that challenges are better solved together. That's why you'll join a diverse, global community of solvers - an unexpected mix of people that come together to build trust in society and solve important problems. With us, you are encouraged to lead with your heart and values, and where your unique skills are developed and put to work in unexpected and exciting ways, superpowered by technology.

Our Risk Services Practice provides an invaluable safeguard in today’s complex operating environment with insights and independent assurance. We work with clients to deliver business control to help them to protect and strengthen every aspect of their business from people to performance, systems to strategy, business plans to business resilience. We help clients manage, mitigate and control risks from potential cybersecurity breaches to possible breaks in the supply chain. We assess and prepare businesses by looking into their technology, finance, data analytics, regulatory requirements, data security and privacy, internal audit, and the third parties our clients rely on, to help clients deliver quality results and meet their strategic objectives.

How will you value add?

A career within Regulatory Risk and Compliance services, will provide you with the opportunity to help companies rethink their approach to risk and create a sustainable risk advantage. We’re a part of a unique client proposition, assisting our clients develop proper internal controls by leveraging analytics and technology solutions to underpin efficient execution of governance, to optimise their risk and compliance policies and processes, and improve business performance.

As an Assistant Manager, you'll work as part of a team of problem solvers, helping to solve complex business issues from strategy to execution. The skills and responsibilities for this management level include but are not limited to:

• Perform, monitor and/or review customers due diligence, onboarding of customers to assure compliance with the AML rules and requirements.
• Assist with the creation and maintenance of accounts and opportunities for purposes of onboarding, risk management and KYC assessment through Salesforce.
• Provide advice and guidance to employees on compliance-related matters.
• Develop and deliver compliance training programs to employees.
• Complete the annual compliance monitoring program.
• Any other compliance related matters and ad-hoc projects.

About You

• At least 4 to 7 years of banking regulatory or external audit experience in a big 4 audit firm, regulator or financial institution. Previous employment with regulator(s) will be highly preferred.
• Strong understanding of banking operations, particularly in areas of corporate treasury risk function and risk management (with focus on market, liquidity and credit risks).
• Experience in local MAS and global regulatory requirements preferred. This includes Basel regulatory requirements (FRTB, CVA, IBOR transition, etc), Risk Based Capital Adequacy requirements, amongst others.
• Experience in performing internal audits or internal control reviews preferred.
• Meticulous and attention to details, possessing an analytical and enquiring mind-set.
• Professional, confident and highly motivated self-starter, with an ability to handle multiple engagements/projects in a fast paced environment with tight deadlines. Positive attitude to learn and strong team player.
• Possess strong values, personal integrity and emotional intelligence.

Job Roles & Responsibilities

• To liaise with all government agencies pertaining to all DG license applications and / or renewals.
• To support various departments in reading SDS to define the appropriate storage locations.
• To carry out periodic reviews of SOP and audit, to ensure that all DG operations are carried out in compliance with applicable local regulatory requirements and policies.
• To support Compliance Manager in managing group ISO documentation and audits.
• To carry out any ad-hoc tasks, projects or assignments assigned from time to time.

Job Requirements:

• At least 3 years of relevant experience in handling DG cargo and well verse in reading SDS.
• Knowledge in DG regulatory matters is a must.
• Keen to learn and willing to take responsibility.
• Able to communicate and work well with various departments to improve work processes.
• At least a Diploma in Chemical science.
• Able to work within short notice.

Benefits:

• Daily Lunch Provided
• Company Transport Provided at designated MRT stations (Lakeside, Boon Lay & Woodlands)
• Medical and Dental benefits
• Attractive Bonus Scheme (AWS, Special Bonus etc.)
• 5 days' work week

To carry out inspection of client properties including returned properties and all follow-up actions to monitor and report compliance with requirements provided by Client and that the premises do not infringe authorities’ requirements, including but not limited to:

a) Non-compliance to statutory requirements, e.g.

•

Unapproved Building Works and any Additions/Alterations,

•

Fire Safety Measures,

•

Unapproved Usage or Change of Usage of Premises,

•

Illegal activities in premises e.g., illegal dumping, gambling, etc,

•

Unapproved Worker’s Dormitory,

•

Unapproved sales of diesel,

•

Unapproved subletting,

•

Encroachment,

•

Illegal storage of Petroleum and other Flammable Materials,

•

Poor Maintenance/Housekeeping.

Working Timing : 8.30 AM to 6.00 PM

Island Wide

Job Description:

• Assist Resident Engineer in daily close supervision and coordination duties
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Participate in construction interface meeting for Instrumentation, Building Services (ELV) systems
• Checking BIM Model and interface with C&S team for the completeness of site clearance for Instrumentation construction activities
• Review of design deliverables for Instrumentation, Building Services (ELV) and release of IRF’s to contractor as per RE’s instructions
• Update of Daily Site Reports (DSR), maintain quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works
• Participate in FAT activities and punch list follow up
• Participate in SAT, Commissioning of Instrumentation, Building services (ELV) activities till the final handover of the project

Job Requirements:

• Diploma in Instrumentation Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project or waste/water management projects in Singapore, particularly Instrumentation, Control, Automation and Building Services (ELV) systems

Job Objectives

• Establish DSSG Quality Management System (QMS) in GMP QA through review and improvement of operational process, and ready for obtaining the importation license and new product launch.
• Promote GMP/GDP QA activities and enhance QMS. As a result, contributed to the stable supply of the highest quality products and DS's business success.
• Assist in assuring the quality of products allying with each local QA in Asia.
• Enhance Global QA management and activities (Global SOP, QMS, Fostering Quality Culture, Training, Corporate GMP Audit etc.)

Job Responsibilities:

• Support Head of GMP-QA Office, and report QA activities to the head of GMP-QA.
• Perform QA for Imported Finished Products and CMO / Logistics management (Review QC report & Product release, Deviation, Change control, Complaint, Product Recall, Return, Improve quality issues, Maintain QA agreement, Enhance DI), GMP/GDP audit, appropriate document management including SOP.
• Market delivery release
• Enhance DSSG QMS allying with DSG company regionally / globally
• Contact with Authority if necessary
• Support DS group company activities
• Contribute to enhance Global QA management and activities (Global SOP, QMS, Fostering Quality Culture, Training, Corporate GMP Audit etc.)

Job Specification:

Technical Skills

• B. degree or higher in Pharmaceutical or related science categories
• Language: English and Chinese or Japanese
• GMP-QA Management including product release (5 years)
• QMS (Quality Management System) Management / experience of operating eQMS is preferable
• Bio knowledge preferred (to prepare for further ADC)
• General PC operation (Word, Excel, PPT preparation)

Soft Skills

• Logical Problem-solving
• Decision making
• Communication
• Leadership,
• Collaboration and Teamwork,
• Adaptability,
• Time management,

Morgan Stanley is a leading global financial services firm providing a wide range of investment banking, securities, investment management and wealth management services. The Firm's employees serve clients worldwide including corporations, governments and individuals from more than 1,200 offices in 43 countries.

As a market leader, the talent and passion of our people is critical to our success. Together, we share a common set of values rooted in integrity, excellence and strong team ethic. Morgan Stanley can provide a superior foundation for building a professional career - a place for people to learn, to achieve and grow. A philosophy that balances personal lifestyles, perspectives and needs is an important part of our culture.

Global Financial Crimes (GFC)

Coordinates day-to-day implementation of the Firm's enterprise-wide financial crime prevention efforts. GFC has responsibility for governance, oversight and execution of the Firm's Anti-Money Laundering (AML), Sanctions, Anti-Corruption, Anti-Tax Evasion, and Government and Political Activities Compliance programs.

Primary Responsibilities

The Sanctions Compliance Officer (SCO) will be responsible for providing economic sanctions related business and programmatic advice in support of the Morgan Stanley Global Sanctions Program, including oversight of APAC based businesses.

The SCO will be part of a team of financial crimes specialists collectively responsible for compliance and regulatory matters pertaining to economic sanctions programs adhered to under the Firm's Global Sanctions Policy, including the U.S. Department of the Treasury's Office of Foreign Assets Control (OFAC), His Majesty's Treasury of the United Kingdom's Office of Financial Sanctions Implementation (OFSI), the United Nations Security Council (UNSC), and the Council of the European Union (EU Council), as well as regional regulatory authorities including but not limited to, Hong Kong, Japan, Singapore, China, Australia, Taiwan, India, Indonesia, and South Korea.

Specific job responsibilities include:
> Assist in the ongoing development, administration, and implementation of the Firm's economic sanctions compliance programme, including assisting with the ongoing iterative uplift of program specific control frameworks
> Address sanctions related queries from first line risk, business and operations groups with respect to sanctioned products and related risks, including CMIC related inquiries and sanctioned product queries from regional business and risk groups
> Work with GFC business advisory and legal teams to provide written and verbal communication on sanctions-related issues to the lines of business; performing and reviewing highly sensitive client and transaction search information; reporting, escalating and documenting results
> Maintain awareness of regulatory changes related to economic sanctions, ensuring proper communication and timely implementation of new procedures and/or enhanced due diligence programmes in compliance with any change in laws and regulations
> Provide periodic review and maintenance recommendations for APAC specific sanctions control environments in conjunction with first-line business risk groups
> Develop, recommend, and implement risk-based processes and controls to ensure business unit compliance with economic sanction, especially emerging regimes and programmes
> Develop content for and deliver specialized training to relevant internal audiences concerning economic sanctions for both in-person and Firm-wide online training modules
> Coordinate with the Risk Assessment team on the yearly economic sanctions Risk Assessment
> Review and investigate escalated payments and/or transactions identified for potential matches to sanctions lists; ensure prompt handling and response
> Conduct ad hoc due diligence projects arising from the administration of the economic sanctions program
> Assist with responding to regulatory exams, inquiries and audits

Qualifications

> Strong academic credentials.
> Minimum of 5 years of relevant experience in Financial Crimes Compliance or related functions, preferably at a large/complex financial institution, law firm, or government/regulatory body.
> Detailed understanding of the laws, rules, regulations and industry best practice pertaining to economic sanctions, in particular the sanctions programs administered and enforced across US, UK, EU and APAC jurisdictions.
> Ability to understand and assess a wide variety of complex commercial transactions.
> Highly-motivated self-starter able to work independently while collaborating as part of a global program.
> Strong analytical and problem-solving skills and the ability to provide viable solutions in a time-sensitive environment.
> Strong written and verbal communications skills, attention to detail, and effective time management.
> Sound judgment and an ability to appropriately escalate issues internally.
> Strong interpersonal skills and team-player attitude.
> Certification as an Anti-Money Laundering Specialist by ACAMS or equivalent AML certification/license - or certification within first 15 months of employment.

Skills desired

> Strong understanding of financial markets and banking transactions.
> Strong project management skills.
> Experience in configuration of client and transactional screening technologies and management of alert disposition processes.

Job Description

• Industry/ Organization Type: IT/ Consultancy Firm
• Position Title: Software Tester
• Working Location: One North
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Basic + Bonus
• Duration: 2 years contract (Renewable)

Key Responsibilities

• Develop and implement comprehensive quality assurance strategies and plans.
• Create detailed test plans (including test cases and scripts) for functional, performance, and regression testing.
• Oversee the execution of test plans.
• Promote and implement test automation strategies to enhance efficiency and coverage.
• Establish and monitor key quality metrics.
• Prepare and present reports on test progress, defects, and other relevant quality assurance metrics.
• Collaborate with development teams and other stakeholders to understand requirements and ensure quality objectives are met.
• Identify potential quality risks in software products and processes and develop mitigation strategies.
• Ensure software solutions deliver a positive user experience and comply with industry standards and regulatory requirements.

APPLY NOW!!!

• At least 2 years of experience as a Software Tester/ QA Engineer in software development projects.
• Minimum Diploma in IT, Computer Science, Engineering, or a related field.
• Experience in QA strategy, test plans, and automation.
• Proficiency in quantifying and analyzing user requirements.
• Skilled in exploratory testing and functional testing with automated frameworks.
• Experience designing test cases with boundary, cross-browser, and load testing techniques.
• Able to start work immediately or on short notice.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68215 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Jobscope:

• Ensure that the manufacturing facilities, process and systems are validated in full compliance with cGMP and regulatory requirements so as to meet the stipulated product quality standards in line with established specifications of the organization.
• Play a key role in assessing, reviewing and approving changes that may have an impact on the validation status of the facilities, processes and system on site.
• Act as a Validation Coordinator for projects having quality impact, chair the Validation Working Party meetings and lead the conduct of validation activities to ensure that validation/regulatory requirements are met.
• Review and authorize validation protocol documents and reports
• Participate as an audit team members and/or as a subject matter expert.
• Participate in the conduct of investigations relating to customer complaints/ failures
• Perform QA role in New Production Introduction (NPI) projects to ensure that the manufacture complies with GMP requirements
• Lead the cleaning validation programme to ensure that all cleaning methods used are validated in compliance with regulatory requirements

Requirements:

• Min. Degree in Chemical Engineering or other relevant engineering discipline.
• Possess 1-2 years of relevant work experience in the Pharmaceutical or other relevant industry.
• Experience in manufacturing validation which includes Facility, Equipment and Process qualification.
• Good knowledge of GMP and validation
• Good knowledge of quality and manufacturing process knowledge
• Good knowledge of validation system and its principles.
• Excellent problem analysis, technical writing and oral communication skills.
• Good interpersonal skills and a dynamic team player with leadership skills. Able to work and influence a cross-functional team.

To find out more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh | Registration No: R1109239

• Drive Control Assessment projects assign by APAC, global compliance and risk control team.
• Implement Country Risk Assessment (CRA) and Operation Risk Assessment.
• Identify control gaps and abnormal issue through projects and report to APAC compliance head and China management and related stakeholder.
• Make remediation plan to chase the implement timeline.
• Lead corporate governance project from compliance aspect.
• Review compliance management reporting line and make tailored entity contracting relationship according to cross boarder business.
• Give advice on data center and data transfer matters according to global rules and norms.
• Lead AML team, responsible for sanction and AML matters.
• Give compliance and legal advice on sanction, KYC issues to the senior management and Board of Directors.
• To drive KYC and sanction screening mechanism.
• Establish and strengthen risk and compliance management procedure.
• Drive, Establish data and privacy related law and regulations promulgate like Cybersecurity Law, Data Security Law, Personal Information Protection Law, Cross-Border Data Transfer Regulation.
• Analyze potential gaps and make remediation plan.
• Drive compliance and data privacy issue according to data related legislation.
• Participate and manage third party audit, internal audits across China and HK.
• Lead and Drive APAC compliance Singapore MAS, Malaysia BNM AML sanction program.
• Responsible for customer on board AML and sanction review.

• Drive Control Assessment projects assign by APAC, global compliance and risk control team.
• Implement Country Risk Assessment (CRA) and Operation Risk Assessment.
• Identify control gaps and abnormal issue through projects and report to APAC compliance head and China management and related stakeholder.
• Make remediation plan to chase the implement timeline.
• Lead corporate governance project from compliance aspect.
• Review compliance management reporting line and make tailored entity contracting relationship according to cross boarder business.
• Give advice on data center and data transfer matters according to global rules and norms.
• Lead AML team, responsible for sanction and AML matters.
• Give compliance and legal advice on sanction, KYC issues to the senior management and Board of Directors.
• To drive KYC and sanction screening mechanism.
• Establish and strengthen risk and compliance management procedure.
• Drive, Establish data and privacy related law and regulations promulgate like Cybersecurity Law, Data Security Law, Personal Information Protection Law, Cross-Border Data Transfer Regulation.
• Analyze potential gaps and make remediation plan.
• Drive compliance and data privacy issue according to data related legislation.
• Participate and manage third party audit, internal audits across China and HK.
• Lead and Drive APAC compliance Singapore MAS, Malaysia BNM AML sanction program.
• Responsible for customer on board AML and sanction review.

Responsibilities include, but are not limited to, the following:

• Adhere to the sanction check requirements and maintain proper, accurate and complete records of the checks made.
• Assist the Business Divisions in ensuring all required sanction checks are conducted with no breaches in the branch’s policies and service standards.
• Support Director RMC in control owner of sanction policies and effective implementation.
• Support Director RMC in undertaking regular reviews of sanction procedures and recommend/implement modification where appropriate to ensure that any business risks are mitigated to the maximum extent possible.
• Support Director RMC in inculcating strong risk culture within the Singapore operations.
• Support Director RMC in ensuring the branch keeps up with sanction regulatory updates and implementation.
• Support Director RMC and CFOO Singapore in ad-hoc projects/review work assigned.
• Maintain an environment of ‘no surprises’, open communication and transparency.
• Ensure compliance and no breach in DAL, code of conduct and policies set for self.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.
EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

JOB DESCRIPTION:

Department: Production Control of Li-ion Battery

Reports to: Deputy General Manager

Functional relationships:

- Li-ion battery system and operation design in Japan

- Li-ion battery Production and Material Planning Manager in Japan

POSITION PROFILE:
This position is to propel any activities related production management in both business and infrastructure with highly specialize global system and operation knowledge for battery operation standardization.

Key Duties & Responsibilities:

• Policy, strategy alignment and coordination of Project by collaborating with Japan HQ or other group company in Japan.
• To initiate periodical meetings with Japan HQ or other group company to solve problems in own division.
• Collaboration new model introduction for Liquid Cell including customer approval.
• System and operation design change for productivity improvement.
• Material Introduction and EOL management.
• Global System and Operation design expertise in SCM and Production Management.
• Training and education for local Production Control Planner.
• Window person to TMM , MDW and Headquarter to facilitate effective communication / knowledge transfer to strengthen global SCM.

Ability/Competency required:

• To hold bachelor’s degree in economics or any business field.
• To have deep & specialized technical knowledge in Li-ion battery and to be able to fully utilize it in actual job for improvement.
• To have logical thinking, analytical skill and good SCM system and operation knowledge.
• To have strong mind-set for change and improvement.
• Excellent interpersonal communication skills, analytical skills, project management skills, and troubleshooting skills.
• To have networking ability with Li-ion battery oversea plant and related functions.
• To have business fluent Japanese and English language skills to liaise with Japan factories, Business Planning, HQ related departments and local staff in MES factory.

Murata Electronics Singapore is committed to providing a safe and secure environment for all job applicants.

Please note that Murata Electronics Singapore does not charge any fee for job applications or interviews. If you receive any suspicious emails or messages claiming to be from Murata Electronics Singapore, please do not respond and report it to us immediately.

Our client has more than 20 restaurants in Singapore that provide various dining concepts that refined tastes of both local and international food enthusiasts.

• In charge of implementing and managing food safety and quality assurance programs across the Central Kitchen and all outlets.
• Perform training in SOPs, food hygiene and food handling techniques.
• Work closely with vendors and contractors on maintenance matters concerning to food safety and QA issues.
• Ensure all SOPs are adhered to at Central Kitchen & outlets

Requirements:

• Diploma in Food Science & Technology or related field
• At least 2 years of QA experience in the F&B industry.
• Meticulous and highly motivated.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is the largest maritime safety company globally, setting the standard for innovation in design and engineering.

• Establish, maintain, and improve the Quality Management System (QMS) to meet regulatory and Class Approval requirements.
• Lead quality initiatives and promote a quality culture across the company, ensuring continuous performance improvement.
• Coordinate and conduct audits, report outcomes, and ensure corrective actions are implemented effectively.
• Support teams in conducting root cause analysis and incident investigations, and compile reports in accordance with regulatory standards.
• Train employees on QMS processes and ensure clear communication of quality procedures and responsibilities.
• Manage budgets for QMS projects, oversee licensing, and document quality approvals and procedures across allocated sites.

Requirements:

• Bachelor’s Degree in Engineering with ISO 9001: 2015 certification.
• At least of 5 years of experience in Quality Assurance and management in the aviation or marine industries.
• Completion of the CAAS M10/L11/L12 Examination and ability to interpret CMM, including Illustrated Part Listings (IPL).
• Experience collaborating with OEMs for capability expansion and familiarity with Lean, Kaizen, and 5S methodologies.
• Knowledge of relevant quality standards and regulations in the marine, defence, and aviation sectors, along with practical experience in Quality Management Systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Arrange shipment of raw materials from vendors, intercompanies or finished products to customers ensuring smooth delivery of shipments.
• Liaise and coordinate with freight forwarders and freight insurance for shipments.
• Prepare certificate of Origin for outgoing goods.
• Coordinate with warehouse on receiving, transfer of goods or delivery of products.
• Prepare and ensure accuracy of import and export documentation.

Responsibilities:

• Perform all aspects of QC responsibilities as it pertains to release activities that will include but is not limited to: sampling, testing, and disposition of raw materials and final packaging/ component lots
• Support additional areas of QC including Rejected, Quality Hold, and Non-conforming materials.
• Perform all activities adhering to strict cGMP guidelines
• Maintain on-time completion of all training requirements
• Perform simple laboratory instrument up keep including the cleaning, calibration, and the preventative maintenance of the instrument as outlined within the departments governing procedures
• Participate in department initiatives to support the continuous improvement of the quality systems of the QC department
• Practice safe work habits and adhere to safety procedures and guidelines

Requirements:

• Min Degree in Science or equivalent with at least 2 years of relevant experience in the pharmaceutical / chemical manufacturing industry.
• or Diploma in Chemistry, Lifescience, Pharmaceutical Science or any related course of studies with more than 5 years of experience
• Experience in operating laboratory equipment such as HPLC, GC , KF Titrators.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Recruiter Reference Code: #HCG

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day