Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Description
✔️ 5 days work
✔️ Immediate Hiring

Job Scope:

• Packing:Pack products into boxes or containers.
  Ensure products are in good condition and properly labeled.
  Prepare goods for shipping or storage.
  
• Operating Machines:Run machines that make or process products.
  Monitor machine performance and fix minor issues.
  Follow safety rules to avoid accidents.
  
• Quality Checking:Inspect products for defects or issues.
  Test products to ensure they meet quality standards.
  Document any problems and report them for correction.
  

Requirements:

• Ability to follow instructions and work in a team.
• No prior experience required; on-the-job training provided.

To Apply, kindly click on the "APPLY NOW" button
We regret that only shortlisted candidates will be notified.
Staffking Pte Ltd (20C0358) | Lee Cheng Yin (Gina) (R22104523)
EA License No: 20C0358

Job Description & Requirements

• Work closely with the project team on environmental issues such as noise monitoring, pollution, vector control, air pollution, water pollution and drainage, prevention & control of infectious diseases, food hygiene, solid waste management, chemical storage & disposal, and haze response procedure. Ensure compliance with the latest environmental regulations.
• Implement and monitor environmental control programs on site.
• Prepare, submit statutory reports, and maintain documentation for environmental public health requirements on environmental issues.
• Conduct regular inspections and actively be involved in environmental matters on site.
• Enforces all environmental requirements and in-house rules and regulations
• Attend site meetings/ client meetings and prepare weekly reports.
• Liaise with government authorities in relation to safety and environment compliance matters.

REQUIREMENTS:

• Must be registered ECO with NEA
• Must be registered as ECMO under IES
• At least 2 Years (s) of working experience in HDB building construction field
• Work well under pressure and work independentlyEnvironmental control officer

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

[1 year contract, renewable]

Test Strategy and Planning:

· Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.

· Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

· Lead the development of automated testing frameworks using Cypress/Playwright for

end-to-end testing.

· Implement performance and load testing using tools like Gatling, K6, and

Autocannon to ensure platform scalability.

Quality Assurance:

· Conduct contract testing with Pact.js to validate interactions between microservices.

· Perform thorough regression testing when bugs are resolved and new features are

implemented.

· Collaborate with developers to ensure code quality and adherence to best practices.

· Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking

or delays.

Cross-Functional Collaboration:

· Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.

· Participate in agile ceremonies, providing QA insights and contributing to sprint planning.

· Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

· Identify, document, and track software defects using industry-standard tools.

· Conduct root cause analysis for critical issues and implement corrective actions.

· Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

· Mentor junior QA engineers, fostering a culture of quality and continuous improvement.

· Stay updated with emerging QA technologies and methodologies, introducing

· relevant innovations to the team.

Requirements:

· Bachelor's degree in Computer Science, Software Engineering, or a related field.

· Minimum of 7 years of professional experience in Software Quality Assurance.

· Proven experience with automation testing, particularly using Cypress for E2E

· testing.

· Hands-on experience with performance testing tools like Gatling and Autocannon.

· Experience with contract testing frameworks such as Pact.js.

· Proficiency in JavaScript (TypeScript) and familiarity with Go.

· Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.

· Experience with AWS services, Docker, and Kubernetes.

· Familiarity with CI/CD pipelines using GitLab and ArgoCD.

· Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).

· Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.

· Experience with logging and monitoring tools like Splunk or OpenSearch.

Soft Skills:

· Strong analytical and problem-solving abilities.

· Excellent communication skills, both verbal and written.

· Ability to work collaboratively in a fast-paced, agile environment.

· Leadership qualities with the ability to mentor and guide team members.

· Minimum 2 years experience (or equivalent level of skill/confidence) with modern web applications using JavaScript.

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description:

• Responsible for quality issues arising from production and customer feedback and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections.
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.
• Work closely with other departments to ensure committed schedules are met in a timely and effectively manner.
• Perform any other duties, as assigned.

Requirements:

• Min Diploma or degree in precision engineering, Quality Management or mechanical engineering.
• Minimum 2 to 3 years of working experience in quality engineering or in manufacturing
• Possess excellent leadership & teamwork abilities and organizational skills
• Knowledge and application of quality tools - SPC, PFMEA, Control Plans, CPK, 8D Report, GR&R and Minitab.
• Proficient in understanding engineering drawings with sound knowledge of GD&T (Geometrical Dimensioning & Tolerancing)
• Good knowledge of ISO 9001, 14001 and 13485 quality system
• Mandarin speaker is preferred (to liaise with Mandarin speaking China & Taiwan stakeholders)

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

About the Role

Within an Agile framework, our team provides testing as a service to various squads within a banking and finance domain Agile Release Train. This role ensures the seamless transition of new features and applications into the production environment. We are looking for a new team member to enhance our testing capabilities and collaborate effectively with squads.

Key Responsibilities

• Collaborate with squads to develop effective test strategies and plans.
• Review and analyze user stories with a focus on testing and testability.
• Execute test cases, document results, and report defects in an audit-compliant manner.
• Support squads in troubleshooting and resolving defects during the development process.
• Develop and improve test automation processes, working with fellow test engineers.
• Provide continuous feedback by reporting defects and issues to the squads.
• Ensure quality throughout the change process by working closely with the squads.
• Enhance the testing service through continuous improvement initiatives in collaboration with fellow testers.
• Support the transition of changes into production by conducting post-release testing and support, including training for support team members.

Requirements

Must Have

• Proven experience as a Quality Assurance Tester, preferably within the financial industry.
• Familiarity with Agile frameworks and QA methodologies.
• Experience testing both in-house developed applications and vendor-based systems.
• Excellent understanding of functional and workflow-based system designs spanning multiple interconnected systems.
• Solid knowledge of securities lending, repo, and back-office processes, including:Settlement workflows (e.g., DVP, FOP).
  Corporate actions and their impact on securities positions.
  Familiarity with trading, collateral management, and financial workflows.
  
• Experience working with Temenos T24.
• Proficiency in using Jira and other testing software/tools.
• A positive, can-do attitude with high motivation to acquire new technical and functional skills.
• Ability to work independently with minimal supervision.
• Strong communication skills in English.

Nice to Have

• Experience with test automation and management tools such as Selenium, Tosca, or X-Ray.
• Knowledge of financial messaging standards like SWIFT (MT5xx series) or ISO 20022.

[1 year contract, renewable]

Test Strategy and Planning:

· Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.

· Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

· Lead the development of automated testing frameworks using Cypress/Playwright for

end-to-end testing.

· Implement performance and load testing using tools like Gatling, K6, and

Autocannon to ensure platform scalability.

Quality Assurance:

· Conduct contract testing with Pact.js to validate interactions between microservices.

· Perform thorough regression testing when bugs are resolved and new features are

implemented.

· Collaborate with developers to ensure code quality and adherence to best practices.

· Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking

or delays.

Cross-Functional Collaboration:

· Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.

· Participate in agile ceremonies, providing QA insights and contributing to sprint planning.

· Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

· Identify, document, and track software defects using industry-standard tools.

· Conduct root cause analysis for critical issues and implement corrective actions.

· Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

· Mentor junior QA engineers, fostering a culture of quality and continuous improvement.

· Stay updated with emerging QA technologies and methodologies, introducing

· relevant innovations to the team.

Requirements:

· Bachelor's degree in Computer Science, Software Engineering, or a related field.

· Minimum of 5 years of professional experience in Software Quality Assurance.

· Proven experience with automation testing, particularly using Cypress for E2E

· testing.

· Hands-on experience with performance testing tools like Gatling and Autocannon.

· Experience with contract testing frameworks such as Pact.js.

· Proficiency in JavaScript (TypeScript) and familiarity with Go.

· Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.

· Experience with AWS services, Docker, and Kubernetes.

· Familiarity with CI/CD pipelines using GitLab and ArgoCD.

· Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).

· Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.

· Experience with logging and monitoring tools like Splunk or OpenSearch.

Soft Skills:

· Strong analytical and problem-solving abilities.

· Excellent communication skills, both verbal and written.

· Ability to work collaboratively in a fast-paced, agile environment.

· Leadership qualities with the ability to mentor and guide team members.

· Minimum 2 years experience (or equivalent level of skill/confidence) with modern web applications using JavaScript.

• 5 days work week
• Location: Central - CBD
• Basic up to $3700
• AWS & VB

Job Scope:

• Process receipts and maintain customer records.
• Handle debit and credit notes in AR.
• Calculate sales commissions.
• Generate and send customer Statements of Accounts.
• Assist with letters of credit and liaise with relevant parties.
• Process credit applications and assess credit risks.
• Manage all aspects of Accounts Receivable in the Finance Department.
• Follow up on overdue payments with customers.
• Manage bad debt provisions and write-offs.
• Perform month-end closing tasks.
• Process sales invoices accurately and promptly.
• Support monthly closing and year-end audits.
• Maintain updated customer records.
• Handle any additional tasks as assigned.

Job Requirement:

• Minimum Diploma in Accounting or Equivalent studies
• Minimum 2 years of AR/credit control's experience

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Responsibilities

Mechanical

• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all mechanical works are carried out according to the latest revision mechanical drawing and complies with contract specification, class requirements and quality management system.
• Arranges coordinate and carry out all the inspection inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Performs material equipment incoming are as per Vendor document;
• Verifies tools and equipment used are as per procedures;
• Familiarizes with mechanical inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Verifies preservation are being performed as per preservation plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Prepares review and document inspection records, certificates and NDT reports for the submission to relevant party.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly key performance indicators (KPI) related to mechanical.
• Verifies mechanical MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.

Dimension Controller

• Implements dimensional control methods and procedures throughout the fabrication and integration process of the modules to meet the requirements of project specifications and codes.
• Conducts dimensional checking using latest electronic total stations before and after welding of the main deck frame and main column of the modules to ensure that the dimensions are within specifications.
• Reviews design drawings, do necessary best fit calculations, prepare professional dimensional control reports using AutoCAD and get approval by the clients and/or certifying authority.
• Maintains dimensional survey equipment and keep proper documentation of dimensional control reports to meet project requirements and QA/QC audit standards.
• Gives guidance and advice to sub-contractors on how they can increase their productivity.
• Liaises with key stakeholders including Client on the dimensional control methods, acceptance criteria in accordance to project requirements.
• Prepares and compile final dimensional control survey reports as part of the final documentation report.

Electrical

• Takes charge of projects, coordinate and carry out all E& I QA/QC activities for the projects including hazardous zone equipment’s inspection (ATEX/CompEx/IECEx Certified).
• Review and evaluate the drawings as per Classification Societies and Client’s requirement.
• Prepares the QA procedures and get it approved with Classification Societies and Client.
• Witness the testing of HV/LV circuit breaker/starter, neutral earthing resister/fuses and cable megger-ing.
• Coordinates all termination inspection of electrical installation of equipment.
• Preparations of electrical or mechanical completion for equipment.
• Carries out the inspection and testing with Class Surveyors and Class Representatives.
• Ensures all quality control documents are compiled and information’s are handed over for as-build.
• Coordinates daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Monitors and ensure all work is carried out according to the latest revision electrical drawing and complies with contract specifications, Class requirements and Quality Management System procedures.
• Checks and endorse inspection record prior to issue to Client.
• Ensures subordinates comply with Company’s procedure and work instruction
• Reports any non-conformance (NC) and issue Corrective Action Request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Maintains good relationship with the customers as to full fill part of company’s core value to ensure customer satisfaction.
• Implements and compile the monthly Key Performance Indicators (KPI) related to electrical and instrumentation.
• Verifies electrical and instrumentation MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Coating

• Goods knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
• Witness prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
• Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
• Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
• Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
• Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
• Able to handle painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
• Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
• ·Able to send enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
• Ensures calibration certificates of painting instruments are valid & available for reference
• Supervises the workplace and workers safety.
• Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
• Reviews Inspection Test Plan (ITP) as per project specification and procedures
• Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
• To monitor all painting/coating related works and ensure all final products meet project specification requirement.
• Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
• Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
• Conducts onsite audit as per relevant specification and customer requirement.

Structural

• Takes charge of project and carry out all QA functions for the assigned project.
• Prepares list of daily job activities and provide clear job instructions before delegating the jobs to subordinates.
• Supervises job coordination, monitor conformity towards quality, environmental and safety management system policies and procedure.
• Monitors and ensure all piping works are carried out according to the latest revision piping drawing and complies with contract specification, class requirements and quality management system.
• Coordinates all the inspections and testing with customer representative and / or classification surveyor as per the Inspection and Test Plan (ITP).
• Materials verification done with the specified mill certificates and codes;
• PMI testing on incoming, welder material;
• Verifies material use on sites are approved project materials;
• Familiarizes with piping inspection process;
• Verifies NDT are done as per approved NDT plan & procedures.
• Monitors the progress of work and report the status of completion of the official inspections such as accepted, rejected, postponed or cancelled to the respective project manager.
• Ensures project documents including inspection, traceability records, certificates, radiography films, and NDT reports are submitted to relevant party to signing.
• Checks and endorse inspection record prior to issue to customers.
• Ensures subordinates comply with company’s procedure and work instructions.
• Reports any non-conformance (NC) and issue corrective action request (CAR), where necessary.
• Ensures response timing for NC/CAR are within acceptance period;
• Ensures close-out response for NC/CAR is of sound reasoning and evidence.
• Coordinates with yard QA/QC team for all Quality documentation submission to SCM with the construction completion.
• Implements and compile the monthly key performance indicators (KPI) related to piping.
• Verifies piping MDR is as per construction prior to release the product back to Singapore.
• Conducts and participate in audit.
• Performs others duties as signed by the superior(s) from time-to-time.

Requirements

• Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
• Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as QA/QC Structural Inspector.
• Working in FPSO/FSO/FPU Project will be added advantage.
• Shall be familiar with AWS D1.1, API 2X, ASME Section II, and ABS Class rules.
• Certified Welding Inspector (AWS CWI or CSWIP 3.1)
• NDT Level II in RT/UT/MPI/PT

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 7:30am - 5:15pm

Fri: 7:30am - 4:15pm

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities

• Conduct Name Screening against Sanction list, Politically Exposed Person list, Internal Blacklist and Adverse News to support KYC Periodic Review Activities.
• Coordinate between relevant parties and stakeholders to complete screening in timely manner
• Ensure that screening assessments are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable.
• Other tasks as assigned by Group Head / Manager

Requirements

• Able to link diverse information to build a full picture and spot inconsistencies.
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening.
• Strong team player and team leader
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and back office.

Responsibilities:

• Conduct investigation into causes of bus accidents / incidents arising from bus defects
• Assist in planning & managing campaigns for retrofitting on buses for improved performance, safety and standardization
• Assist to implement maintenance policies for vehicle improvement to meet our operational requirements in accordance to manufacturers’ recommendations
• Conduct engineering audits, smoke checks and field visits
• Any ad-hoc jobs as per assigned

Requirements:

• Diploma in Engineering
• At least 5 years' relevant experience in automotive industry
• Hands-on experience on bus repair
• Proficient in software applications such as Microsoft Office and SAP

We regret to inform that only shortlisted candidate will be notified.

Submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for two years for consideration of future job opportunities (where applicable) form the date of submission of application.

Responsibilities

• Conduct Name Screening against Sanction list, Politically Exposed Person list, Internal Blacklist and Adverse News to support KYC Periodic Review Activities.
• Coordinate between relevant parties and stakeholders to complete screening in timely manner
• Ensure that screening assessments are adequately and properly documented for regulatory/audit level review.
• Coordinate and/or prepare the required management information reporting data as applicable.
• Other tasks as assigned by Group Head / Team Lead.

Requirements

• Able to link diverse information to build a full picture and spot inconsistencies.
• Possesses knowledge of MAS regulation on AML and Sanctions requirements including KYC, Screening.
• Strong team player.
• Good communications skills, hands on, independent and proactive in carrying out investigation on customers and/or transactions. Able to work with front office and back office.

Job Scope:

· To assist Fumigator in carrying out fumigation & pest control services in accordance with regulatory requirements

· Notify Supervisor immediately of all incidents which are of material importance to the company such as accidents/near-misses/safety breaches/customer complaints followed by written report

· Check and ensure that all material/equipment/resources required for the day's work is available in the vehicle and in good working condition

· Always maintain sufficient stock of supplies and to submit requisition for replenishment if stock runs low.

· Maintain all equipment on board the vehicle in good working condition and to report damages/uncalibrated items immediately

· To ensure accurate reporting of fumigant stock in the vehicle at the end of each working day

· To be able to manage client's expectations and requests at work site and perform decision making if the team is able to accede to the demands within their limits, else TL will need to escalate to the Supervisor

Requirement:

1.) Driver’s License (Class 3) Required

2.) Vector Control Technician Licence

3.) Completed the following training

a.) Forklift Driver’s Licence

b.) Scissor lift Certificate

c.) Basic First Aid Course Certificate

d.) WAH Supervisor Certificate

4.) Fluency in spoken & written English

5.) Good planning and time management skills

6.) Physically Fit

7.) Ability to work in Teams, and supervise junior technicians and assistants

8.) Good interpersonal skills

9.) Good customer service skill

Responsibilities

• Support the team to deliver operational risk management book-of-work, including risk culture reporting & communications, independent assurance review and control testing, action-plan progress tracking and other related responsibilities

Skills/Requirement

• ·1+ years of experience in operational risk management / Audit
• Strong organizational and time-management skills.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).
• Excellent written and verbal communication skills.
• Attention to detail and accuracy in managing data and reports.

Roles and Responsibilities

• Design, maintain and administer the Company's quality training programs.
• Prepare curriculum, training material and recurrent training material to a defined standard.
• Teach formal classroom training courses such as but not limited to policy, procedures, maintenance paperwork, safety, Human Factors, airworthiness regulations, recurrent training and other subjects.
• Revise training curriculum and serve as subject matter expert.
• Design, maintain and administer GE Aviation – Singapore’s Quality System.
• Initiating, updating and maintaining QCWIs and other quality documents as and when required.
• Be in control of the Technical Library. Assure all data are up-to-date and that revisions are distributed to all Engineers affected.
• Facilitate all regulatory and customer audits, work with the appropriate functions in the formulation of corrective actions.
• Support the training and qualification of Certifying Staff.
• Be responsible for the archival of maintenance records. Supervise a team of Technicians in the scanning of maintenance records and ensuring the operability of the scanning equipment.

Required Qualifications

• Degree in Engineering
• 3 or more years of Experience with Quality Systems
• Certified Part 145 or equivilant
• Minimum 2 years of aerospace experience in repair/manufacturing or a quality assurance role.

Desired Characteristics

• Holds a recognized Lead Auditor or Internal Auditor certification.
• Knowledge of Quality Systems/ISO/Aerospace Standards.
• Possess CAAS Air Legislation paper.
• Knowledge of basic engineering and aircraft engine component repair.
• Good auditing experience.
• Good command of written and spoken English.
• Basic knowledge of PC software.
• Good initiative and analytical skills.
• Strong attention to detail and accuracy.
• Ability to communicate at all levels of the organization.
• Demonstrate oral and written communication skills.
• Strong interpersonal and leadership skills.

Prudential’s purpose is to be partners for every life and protectors for every future. Our purpose encourages everything we do by creating a culture in which diversity is celebrated and inclusion assured, for our people, customers, and partners. We provide a platform for our people to do their best work and make an impact to the business, and we support our people’s career ambitions. We pledge to make Prudential a place where you can Connect, Grow, and Succeed.

Job Summary:

The role of the Distribution Surveillance Officer reports to the Lead, Distribution Audits and Surveillance. The candidate is required to support the Distribution Monitoring team in driving the analytics capabilities and insights to better identify emerging Distribution risks.

The candidate will also support the Lead, Distribution Audits and Surveillance in monitoring the trends of complaints, investigations key compliance risk indicators and sales metrics, which will be reported back to the different Governance Committee(s) in the form of regular MI reporting.

Job Description:

Distribution Monitoring

• Administer the firm-wide market conduct risk framework to better manage Distribution market conduct risks.

• Leverage analytics capabilities and insights to better identify emerging Distribution risks. This includes monitoring trends of complaints, investigations key compliance risk indicators and sales metrics.

• Engage and conduct trainings with distribution channels to discuss and create awareness on market conduct and sales compliance issues.

• Undertake social media scanning and monitoring to identify online postings that are not in compliance with regulatory or Company requirements.

• Provide regular MI reporting to Governance Committee(s) relating to market conduct, fraud and sales metrics.

One Sanction Framework

• Maintaining the central depository of any issuance of meted sanctions in PACS through the One Sanction Framework.

• Handling any internal or external queries relating to One Sanction Framework and Police Orders/Prohibition Orders from the Police or MAS.

Distribution Audits

• Conduct agency reviews to assess Prudential Supervisors' compliance with supervisory competence standards in accordance with MAS / LIA Guidelines.

Others

• Undertake ad-hoc tasks, projects or reviews as directed by Head of Distribution Monitoring or Head of Distribution Business Partner.

Who we are looking for:

Competencies & Personal Traits

• Self-motivated and driven

• Analytical and attentive to details

• Basic understanding of the insurance industry and operations

• Basic knowledge of regulations and industry guidelines applicable to the insurance/financial industry such as Insurance Act, Financial Advisers Act (FAA) and its subsidiary regulations, Monetary Authority of Singapore (MAS) regulations, Central Provident Fund (CPF) Board regulations, Life Insurance Association (LIA) guidelines

Working Experience:

• Preferably 1-2 years of experience in a compliance role in a financial institution or similar

• Preferably with experience in dealing with Distribution functions

Professional Qualifications:

• Preferably with Insurance-related certifications (e.g. FLMI (LOMA), CMFAS Module 5, 9, 9A & Health Insurance)

Education:

• Degree, preferably in Business, Insurance or Finance related fields Language:

• Strong command of the English language

Prudential is an equal opportunity employer. We provide equality of opportunity of benefits for all who apply and who perform work for our organisation irrespective of sex, race, age, ethnic origin, educational, social and cultural background, marital status, pregnancy and maternity, religion or belief, disability or part-time / fixed-term work, or any other status protected by applicable law. We encourage the same standards from our recruitment and third-party suppliers taking into account the context of grade, job and location. We also allow for reasonable adjustments to support people with individual physical or mental health requirements.

The incumbent will be responsible for identifying critical gaps, in the supplier process control, drive development of appropriate containment and closure with robust solutions at supplier sites. To develop solutions to verify implemented process controls, engage product engineering for clarification of specifications, partner with SDE to develop appropriate metrics, validate compliance to specifications etc.

Requirements:

• Detailed knowledge of Geometric Dimensioning & Tolerancing (GD&T), at least 1 year of related experience
• Knowledge of part dimension verification tools & techniques, and working experience with data visualization (MS Power BI, Tableau), data manipulation (SQL)

Interested candidates, please forward your most recent resume to [email protected]

Job Description

• Industry/ Organization Type: Manufacturing of High Precision Tooling Components
• Position Title: QC Inspector (Precision Machining)
• Working Location: Commonwealth
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $3,500 + OT + Up to 2 months of Variable Bonus
• Duration: Permanent

Key Responsibilities

• Read and interpret blueprints and specifications to ensure production operations meet required standards.
• Recommend any necessary adjustments and modifications to production processes to ensure product quality.
• Inspect and test materials and equipment produced by the company to verify compliance with specifications.
• Use precision measuring tools such as micrometers, calipers, and gauges to assess products for accuracy.
• Identify and remove products that do not meet production standards and raise Non-Conformance Reports (NCR) for review and resolution.
• Accept or reject finished products and communicate inspection results with the production team for necessary improvements.
• Perform random in-process inspections to monitor product quality at various stages of the production cycle.
• Execute other related duties as assigned.

APPLY NOW!!!

• At least 1 year of experience working as a QC Inspector in the Precision Machining industry.
• Familiarity with production processes in the Precision Machining field is essential.
• Technical skills to understand and interpret blueprints, documents, and technical manuals.
• Basic proficiency in mathematics and computer skills for documentation and quality reporting.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70254 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: IT/ Consultancy Firm
• Position Title: Software Tester
• Working Location: One North
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Basic + Bonus
• Duration: 2 years contract (Renewable)

Key Responsibilities

• Develop and implement comprehensive quality assurance strategies and plans.
• Create detailed test plans (including test cases and scripts) for functional, performance, and regression testing.
• Oversee the execution of test plans.
• Promote and implement test automation strategies to enhance efficiency and coverage.
• Establish and monitor key quality metrics.
• Prepare and present reports on test progress, defects, and other relevant quality assurance metrics.
• Collaborate with development teams and other stakeholders to understand requirements and ensure quality objectives are met.
• Identify potential quality risks in software products and processes and develop mitigation strategies.
• Ensure software solutions deliver a positive user experience and comply with industry standards and regulatory requirements.

APPLY NOW!!!

• At least 2 years of experience as a Software Tester/ QA Engineer in software development projects.
• Minimum Diploma in IT, Computer Science, Engineering, or a related field.
• Experience in QA strategy, test plans, and automation.
• Proficiency in quantifying and analyzing user requirements.
• Skilled in exploratory testing and functional testing with automated frameworks.
• Experience designing test cases with boundary, cross-browser, and load testing techniques.
• Able to start work immediately or on short notice.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68215 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Roles & Responsibilities

a) Perform environmental control/enforcement support to the team.

b) Identify any foreseeable risk of pollution arising from the workplace or work processes.

c) Propose practical action to eliminate any foreseeable ill-health, prevention of pollution at workplace.

d) Any other ad hoc duties required or assigned by Management that are relevant to the project.

Requirements

• Registered ECO (NEA)
• At least 2 years of relevant working experience
• knowledge of all relevant environmental policies, legislations, and guidelines, independent, with strong discipline and accountability.

Job Description

• Industry/ Organization Type: Food Manufacturing/ Production
• Position Title: QC Lab Assistant/ QC Lab Technician
• Working Location: Tuas (Transport provided)
• Working Hours: Monday to Friday, 8 am – 5 pm
• Salary Package: Up to $2,500 + Allowances + Bonus
• Duration: Permanent

Key Responsibilities

• Conduct sensory evaluations, along with chemical and microbiological tests, on both products and raw materials.
• Understand and implement sampling plans, conducting sampling of raw materials and products as required.
• Prepare laboratory culture media and reagents as needed.
• Prepare product samples upon customer request or for internal/external laboratory testing.
• Accurately document all necessary information on the provided inspection forms and master list.
• Maintain cleanliness and organization of the laboratory and its equipment.
• Notify the QC Head of Department (HOD) about lab inventory levels to ensure timely procurement of necessary items and equipment for analysis.
• Report any non-conformities in raw materials and products to the HOD.
• Store retained raw material samples according to production dates for future reference in case of customer quality disputes.
• Participate in company-wide activities and tasks as required.

APPLY NOW!!!

• Minimum GCE "O" Level with passes in Chemistry and Biology
• At least 1 year of related working experience in laboratory work is preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68915 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641