Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

JOB DESCRIPTION

Job Title

Loan Tester

Occupation

SOFTWARE TESTING ANALYST

Job Description & Requirements

About the Client:

Our client is MNC company

Responsibilities:

• Collaborate with cross-functional teams to understand requirements and functionality of the loan onboarding system.
• Design and develop UAT test plans, cases, and scripts to validate system features and integration with existing financial systems.
• Execute test cases, document results, and work with the development team to resolve any issues.
• Testing of new concepts and workflows,comparing them to current practices and providing feedback on usability.
• Analysis of UAT test cases,translating identified defects into actionable items and collaborating with IT, Programme Management, and other teams to resolve noted defects.
• Document all test cases, results, and analysis and lead daily updates & status reports on UAT progress during all testing phases.

Requirement:

• Minimally BA/BS degree or equivalent work experience in related industry.
• Familiar with SME lending space, preferably more than 2 years’ experience in Loan Origination Systems, Digital Channels, User Interface, and Integration Testing.
• Preferable familiar with JIRA and confluence tools for issues management, tracking and loading of test cases.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No. 01C4394 • EA Registration No. R24125310 (PARAMATASEEMA NAVEEN RAJANNA)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

The Company

Our client, a global consulting firm, is partnering with a major private and retail banking institution on a high-impact 12-month project and are seeking a Compliance SOW Specialist. In this role, you will be responsible for evaluating Source of Wealth, ensuring the consistency and integrity of KYC documentation, and managing risks related to customer transactions. Your efforts will be crucial in driving compliance excellence and mitigating AML/CFT risks throughout the customer lifecycle.

The Role

• Review KYC documents to assess the customer’s Source of Wealth.
• Verify SOW documents using public searches, salary data, and other reliable sources.
• Ensure all significant sources of wealth are properly identified and documented.
• Maintain consistency and accuracy of KYC data throughout the customer relationship.
• Flag any discrepancies or conflicting information, working with customers to resolve them.
• Monitor customer transactions for unusual activity or potential red flags.
• Evaluate any negative news about customers and suggest appropriate actions if needed.
• Analyze account transactions for irregularities and potential risks.
• Assess and report on the customer’s AML/CFT risk, advising on steps to reduce any identified risks.

Your Profile

• A bachelor’s degree with 3 to 5 years (Associate) or more than 5 years (Senior) of experience in AML/KYC, preferably in Customer Due Diligence within the financial services industry.
• Strong analytical and problem-solving skills, with the ability to organize and synthesize complex information.
• Professional and constructive when addressing past decisions or the quality of work.
• Ability to manage high volumes of work under pressure.
• Excellent written and spoken English communication skills.
• Self-motivated, with the ability to work independently and collaborate effectively with stakeholders across multiple business units.

Apply Today

Please send your resume, in WORD format only and quote reference number Ref No GO13120735, by clicking the apply button. Please note that only short-listed candidates will be contacted.

Robert Half International Pte Ltd. Co. Registration no.: 200612189E | EA Licence No.: 07C5595 | Gabriela De Brito Lopes Prestes Oxby EA Registration no.: 1989404

The Company

Our client, a global consulting firm, is partnering with a large private and retail banking institution on a 12-month project and is seeking a Suspicious Transaction Reports Review Analyst. The ideal candidate will have at least 3 years of experience in financial services, specifically in Anti-Money Laundering or Compliance within private or retail banking. In this role, you will be responsible for conducting risk-based reviews and performing due diligence efforts related to STR.

The Role

• Conduct risk-based reviews on selected profiles from previous STR assessments to ensure continued compliance with AML regulations.
• Evaluate whether customer relationships should be maintained by reviewing past Source of Wealth adverse news, transaction red flags, and other relevant factors.
• Collaborate with other business units to exchange and obtain necessary information to support due diligence efforts.
• Assess customer AML/CFT risks and recommend actions to mitigate any identified risks.
• Maintain proper documentation and record-keeping in compliance with regulatory requirements and company policies.

Your Profile

• A bachelor’s degree with 3 to 5 years (Associate) or more than 5 years (Senior) of experience in AML/KYC, preferably in Customer Due Diligence within the financial services industry.
• Strong understanding of AML/CFT regulations and experience in conducting STR reviews.
• Ability to assess customer risk based on historical information, adverse news, and transaction patterns.
• Excellent attention to detail and strong documentation skills.
• Professional and constructive when addressing past decisions or the quality of work.
• Ability to manage high volumes of work under pressure.
• Excellent written and spoken English communication skills.
• Self-motivated, with the ability to work independently and collaborate effectively with stakeholders across multiple business units.

Apply Today

Please send your resume, in WORD format only and quote reference number GO13120737, by clicking the apply button. Please note that only short-listed candidates will be contacted.

Robert Half International Pte Ltd. Co. Registration no.: 200612189E | EA Licence No.: 07C5595 | Gabriela De Brito Lopes Prestes Oxby EA Registration no.: 1989404

• Local well-established manufacturing company
• Basic Up to $2600 (depends on experience)
• Permanent role with 14 days A/L+ AWS+ Bonus+ Increments
• Location: Ang Mo Kio
• Mon – Fri / 9am - 6pm **Work-life balance
• **On-job training provided
• **Friendly working environment

Responsibilities:

• Inspection of incoming raw materials, in-process & final product quality control
• Perform lab tests
• cGMP & ISO documentation
• Manage licenses renewal

Requirements:

• 0-2 years experience
• With Diploma in Chemistry related field

For consideration, kindly submit your CV by clicking “APPLY Now” or email to mtc007@mtcconsulting.com.sg

**Only shortlisted candidate would be notified**

Teo Hui Yee R22105757

JOB DESCRIPTION

Job Title

UAT Tester

Occupation

SOFTWARE TESTING ANALYST

Job Description & Requirements

About the Client:

Our client is MNC company

Responsibilities:

• Collaborate with the stakeholders to understand project requirements, define test. objectives, and create test plans and test cases.
• Execute test cases, logging and analyzing of the results for each test case.
• Identify, report and document defects from the testing to track for closure.
• Continuously enhance testing processes, methodologies, and tools to improve efficiency and effectiveness. Stay updated with industry trends and best practices in software testing.
• Function as a key point of contact for escalation on system issues reported and perform second level investigation.
• Handle enquiries, feedback, and abnormalities for continuous improvement post go-live of features.

Requirement:

• A graduate degree in Computer Science, Engineering or a related field.

Top 3 mandatory skills

• Experience with UAT, digital product management is a plus.
• Attention to details.
• Strong business acumen.
• Attention to detail, ability to follow test plans and scripts, and good management skills.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No. 01C4394 • EA Registration No. R24125310 (PARAMATASEEMA NAVEEN RAJANNA)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries

Duration: 6 months contract

Location: Tuas (pickup at Tuas Crescent)

Job Description:

• To perform master data collection, testing and verification for Labware/Moda (with QC Analytical LIMS user experience)
• To perform validation and development of the lifecycle documents and SOPs for Labware/Moda
• Build, modify, configure, customize system
• Create development plans, implementation plans and operating procedures for every test that is set up
• Quality Check processes of LIMS/MODA by performing comprehensive user testing
• Acts as liaison between internal laboratory users and project team to address various system issues
• Implement, integrate, maintain laboratory instrument interfaces with LIMS/MODA
• Evaluates product enhancements and capabilities, in addition to implementing upgrades as required
• Collaborate with other departments for integration of Laboratory Information System with inhouse software

Requirement

• Min Degree in Science/ Chemical Engineer or other equivalent
• Experience in GMP
• Experience in QC equipment qualification such as writing protocol
• Basic knowledge on regulatory requirement on equipment qualification
• Strong Project Management skill

If interested, please email at [email protected]

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]

Industry: Freight Forwarding / Logistics

MNC Environment

Permanent role (AWS Guaranteed + Variable Bonus)

Responsibilities:

• Inspect aircraft spares
• Verify aircraft spares to ensure appropriate accompanying documents from the OEMs, vendors and suppliers
• Work on continuous improvement projects to improve work areas & procedures
• Facilitate periodic audits from civil aviation authorities & customers
• Maintain Shelf Life records for aircraft spares with limited life
• Monitor and conduct surveillance audits on all stores activities within the Bonded Stores
• Raise Discrepancy Reports for any discrepancies found on any aircraft spares in the Bonded Stores

Requirements:

• Work experience in the aviation industry would be an advantage
• Excellent interpersonal & influencing skills
• Proficient in Microsoft Office & presentation skills

Job ID: QX96WW7Y

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

+65 6950 9747

EA Licence Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

Morgan McKinley is seeking a Compliance Manager (Maternity Cover) for a 8 month contract assignment!

Key Responsibilities:

• Conduct thorough investigations related to market misconduct complaints, ensuring timely follow-up actions are taken.
• Perform comprehensive market conduct compliance reviews, monitoring effectiveness and implementing necessary follow-up actions.
• Liaise with relevant Regulators and Government Agencies to ensure compliance with applicable laws and regulations.
• Maintain, revise, and enhance policies and procedures for the effective operation of distribution compliance activities.
• Act as a cover for the team leader and members during their absence, ensuring continuity of operations.
• Undertake any other ad-hoc duties and projects as assigned by management.

Qualifications:

• Bachelor’s degree in Finance, Business Administration, Law, or a related field.
• Must have 2-3 years experience in market conduct investigations, compliance, or regulatory roles within the financial services industry.
• Strong knowledge of market regulations and compliance frameworks.
• Excellent analytical, organizational, and communication skills, with the ability to interact effectively with various stakeholders.
• Ability to handle sensitive information with a high degree of professionalism and confidentiality.
• Proficiency in Microsoft Office Suite and experience with compliance monitoring tools.

Interested candidates may apply through the application system or send it to [email protected]. Shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to Morgan Mckinley Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.morganmckinley.com/sg/privacy-policy. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Morgan McKinley Pte Ltd
Koh Boon Sien
EA Licence No: 11C5502
EA Registration No. R1110345

Suntec City

Hybrid Work Arrangement (4 days WIO, 1 day WFH)

8am to 5pm / 9am to 6pm (Mon-Fri)

Job Responsibilities

• Adhere to the sanction check requirements and maintain proper, accurate and complete records of the checks made.
• Assist the Business Divisions in ensuring all required sanction checks are conducted with no breaches in the branch’s policies and service standards.
• Support Director in control owner of sanction policies and effective implementation.
• Support Director in undertaking regular reviews of sanction procedures and recommend/implement modification where appropriate to ensure that any business risks are mitigated to the maximum extent possible.
• Inculcating strong risk culture within the Singapore operations.
• Ensuring the branch keeps up with sanction regulatory updates and implementation.
• Other ad hoc duties assigned

Requirement

• Prior experience in insurance admin/ operations is required

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Job Description:
In this pivotal role, you will be responsible for coordinating with classification society and Brazilian regulatory consultants to achieve project deliverables related to classification and regulatory compliance. You will also manage FPSO and Project regulatory requirements stemming from regulatory bodies, lead the execution of the Regulatory Compliance Matrix, and facilitate the review, identification, and implementation of regulatory requirements.

Key Responsibilities:
- Coordinate with classification society and Brazilian regulatory consultants to achieve project deliverables
- Manage FPSO and Project regulatory requirements
- Lead the execution of the Regulatory Compliance Matrix
- Facilitate the review, identification, and implementation of regulatory requirements

Requirements:
- Bachelor's degree in Mechanical, Offshore and Marine Engineering, or related engineering disciplines
- Minimum 3 years of experience in regulatory compliance management, with good understanding of Brazilian Regulatory requirements in oil and gas projects
- Familiarity with terms and standards used in the marine and/or offshore industry

- Good proficiency in English, both written and spoken
- Advanced user of Microsoft Office products

· Prepare, review and negotiate various legal documents, correspondences with external parties, SOPs and policies.

· Assist to guide the various departments and business units to implement and/or draft SOPs and policies.

· Handle litigation/legal cases by liaising with internal stakeholders and external lawyers engaged by the company.

· Assist to provide legal advice and support to various departments and business units on matters related to contracts, regulatory compliance and risk management.

· Conduct legal research to ensure the company’s compliance with applicable laws and regulations.

· Draft advice to management on the implications of new laws and regulations and recommend necessary actions.

· Assist in evaluation of compliance to rules, regulations, SOPs and policies.

· Maintain and update database of existing and new agreements, SOP and policies.

· Assist in all analysis and reporting required by the company and/or the parent company.

· Assist with the improvement of the company’s internal control compliance management and legal risk control system design, establishment and maintenance work.

· General administration, reporting and filing tasks.

· Adhere to all company rules and regulations including safety rules.

· Any other duties and responsibilities assigned from time to time.

Requirements:

1. Preferably Law graduate with 2 years of experiences in law firm or in-house legal advisor (preferably in MNCs/logistics/commercial industry)

2. Proficient in legal research and legal document drafting and reviewing

3. Meticulous with ability to handle sensitive information and maintain confidentiality

4. Proactive, strives for continuous improvement

5. Ability to work independently, with integrity and responsibility

6. Multi-task and excellent organization skills, ability to meet deadlines

7. Excellent oral, written and presentation skills

Others Information:

· 5-day work week

· Meal subsidized, medical, dental & insurance benefits

· Company Transport: 2 ways from Jurong East

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

[Order Number: 830450]

Mon-Fri, 9:00 - 18:00

Hybrid Working Arrangement

Familiar with Data security/Data protection

Responsibilities

• To conduct compliance check for functions involving Post-IA, Job Placement, Job Retention and offload checks to ensure that all procedures are complied
• To conduct historical data and referral report compliance check
• To maintain and submit Quality Assurance Reports
• Creating and updating Standard Operating Procedures.
• Involved in Committee Meetings with external partners, comfortable in taking minutes.
• To review established work procedures (workflow) with the aim to improve overall processes.
• Assist in system updating of client’s records.
• Involved in ad-hoc projects/task assigned by superior

Requirements

• Candidate must possess at least a Diploma
• Candidate must have at least 2 years of experience in data auditing & data compliance

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Lim Lai Xin

EA Personnel Reg. no.: R2197913

EA License no.: 07C5771

We are partnered with an established organisation to look for a Test Automation Engineer on a permanent basis.

Responsibilities:

• Automation Design & Development: Creating automation designs and scripts to test product functionality.
• SDLC Participation & Collaboration: End-to-end testing and Interfacing with a diverse range of IT stakeholders (vendors, developers, business analysts, project managers, etc.).
• Test Planning & Execution: executing tests across various domains (systems, networks, applications, etc.).
• Continuous Improvement: Evaluating, maintaining, and improving automation systems for efficiency and effectiveness.
• User Acceptance Testing: Emphasizes documenting processes for ease of future modifications, assisting with User Acceptance Testing (UAT)

Responsibilities:

• Bachelor's Degree in Computer Science / Computer Engineering or equivalent
• At least 6 years of experience in Automation Engineering with a solid understanding of Testing Methodologies, frameworks and SDLC.
• Proficiency in Java, VBScript and automated scripts
• Experience working in an agile environment

Due to the urgency of this role, we are only considering candidates with existing working rights in Singapore.

If you are keen on this role and meet the qualifications, apply now or send your cv to [email protected]. We will arrange for a confidential chat if your profile aligns.

If you do not hear from us within 2 working days, please take this as a notification that you have not been shortlisted.

Job Description

• Design and drive regional Compliance consistency and minimum standards, policies and procedures.
• Identification and assessment of key compliance risks, & supporting the development of robust Compliance programs to test and monitor controls and compliance with laws, rules and regulations.
• To oversee the APAC Quality Assurance implementation and assist the continuous enhancement of the QA program regionally.
• Proactive liaison and support to Head Office Compliance function for framework design and execution.
• Identification and ongoing monitoring of key risk indicator(s) for the local and regional offices within the APAC region from Compliance’s perspectives.
• Identify regional typologies and recommend relevant standardization solution across the region.
• Proactive liaison and guidance to regional Compliance operational coordination function to ensure effective operational Compliance risk control detection mechanism across APAC region.

Job Requirements

• Bachelor's degree or above in Banking, Economics, Laws, Corporate Finance, Accountancy or Technology.
• VP : Minimum 10 years' experience in compliance, audit or other controls related function in the financial services industry.
• Director: Minimum 15 years' experience in compliance, audit or other controls related function in the financial services industry.
• Strong understanding of laws, rules and regulations and business processes.
• Strong expertise in the design and implementation of compliance programs.
• Highly motivated leader and team player.
• Strong analytical, communication and people skills, ability to lead, influence and collaborate with people across different cultures and backgrounds.
• Adaptable, resilient and passionate about making a difference.
• Mature, forward looking, subject matter expert in dealing with complex issues.

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $4000 - $5500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Working Location: Jurong Island (Transport Provided)

Job Responsibilities:

• Responsible for setup of QC Laboratory at new site, including management and training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant
• Interpret laboratory results that are outside of the technical ability of the Lab Analysts
• Review all process and final product test results to check for validity and possible quality-related issues
• Assist quality lab manager in classification for final product and compounding lots
• Assist quality lab manager to develop and implement QC specifications and standards
• Assist quality lab manager to establish lab system according to HSEQ requirements
• Conduct method development and validation, review and upkeep SOP of test procedures, calibration procedures and analytical instruments
• Analyse, review and troubleshoot reliability issues of laboratory equipment and analysis problem and develop practical solutions
• Liaise with vendors to troubleshoot and maintain laboratory equipment
• Develop, implement, and follow calibration plan for equipment to ensure lab data is always accurate, consistent, and repeatable
• Manage lab external agency audits and management systems certification compliance
• Support Manufacturing, Quality, Sales, and Product Management functions
• Assist lab manager, production, or other departments with special projects, as needed
• Lead Special lab Projects and new grade trials
• Implement and participate in safety and quality improvement activities
• Evaluates reported results for consistency with plant process conditions
• Trains laboratory personnel on new instruments and procedures as needed
• Conduct internal audits on the proper execution of test methods
• Liaise with Supplier, execute procurement process and receipt
• Monitor and follow up on daily lab analysis result for accuracy and troubleshooting
• Task as assigned by QC Manager

Requirements:

• A bachelor's degree in chemistry or related field
• Min 5 years’ experience in analytical lab with manufacturing facility
• Experience required in new Laboratory set up, system establishment.
• Experience required with GC, ICP, GC-MS, Antek, KF, IR, UV, Extruder, DSC etc

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:
We are seeking a skilled QA Engineer to ensure product quality and process compliance for a leading semiconductor MNC. The ideal candidate will have experience with QA tools and methodologies to drive continuous improvement and maintain high standards.

Responsibilities:

• Perform quality assurance activities, including process audits and defect analysis.
• Utilize QA tools such as 8D, FMEA, fishbone diagrams, and SPC to identify and resolve quality issues.
• Drive root cause analysis and implement corrective actions.
• Collaborate with cross-functional teams to improve processes and product quality.
• Prepare and maintain QA documentation and reports.

Requirements:

• Degree in Engineering or a related field.
• Experience in QA tools and semiconductor manufacturing preferred.
• Strong problem-solving and analytical skills

License No: 23S1595

Registration No: R23116355

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Well Established Medical Devices Manufacturing Company
• Basic $2200 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492