Requirements:

• Diploma / Degree in Mechanical Engineering or equivalent
• Must possess valid CSWIP or AWS CWI Certification
• Well versed in Microsoft Excel, Word, Powerpoint & Outlook
• Min. 3 years of relevant experience in Marine & Offshore Sector
• Well versed with FPSO / LNG / FLNG Vessels
• Subject to Client’s (Keppel Shipyard Ltd) Interview and acceptance
• Able to work at Client’s / sub-contractors’ premises
• Able to work as per Client’s instructions and satisfaction
• Project based contract

Responsibilities:

Material Inward Inspection:

• Inward inspection of Raw materials (Plate, sheet, Pipe, flange & forgings, etc) with reference to Material Test certificates as per ASME Sec II Part A & Part B
• Inward inspection of consumables (Electrodes and Shielding Gas) with reference to Batch certificates as per ASME Sec II Part C
• Check Static / Rotating equipment arrive at site shall have each equipment tag number and name plate
• Visual inspection for any damage cause during transportation

Piping:

• Fully conversant with isometrics, P&ID’s and general arrangement drawings, as built preparation & modification as per site requirements
• Fit-up & visual inspection (Dimensional Check, Alignment, Weld Visual) of pipe spools (Carbon steel, Duplex SS, Super Duplex SS, Cu-Ni, GRE) and Pipe support as per piping Isometric drawing (Weld Map) at fabrication and installation
• Involved in Line check, Hydro test, air blowing, flushing, chemical cleaning, reinstatement, bolt tightening, N2 leak test, Gross air leak test, N2 Blanketing and punch clearance
• Preparation and review of Test Packs with material and weld traceability

Structural:

• Carried out Material Inspection, Fit up, Visual Inspection
• Daily surveillance and walk about with contractor and monitor the fabrication
• Activities to comply with require quality
• Conducting Technical Tools box meeting with contactors
• Prepare the Weld Sequence prior to important structure weld
• Prepare the Punch list prior to Blasting and Painting
• Inspect and review of all QAQC relevant documents
• Witnessed all Load Tests and Documented
• Area clearance walk about and generate the Punch List
• Ensure Mechanical Devices (Like Trolley beam, Maintenance Pad eyes & Monorail) functional issues and ensure the correct tag installation
• Ensure the Safety devices were installed in correct location
• Ensure the Walk Way Path having right color and band width

Welding Engineering & Inspection:

• Preparing and maintaining Welding Procedure Specification (WPS) & Procedure Qualification Record (PQR), Welder Performance Qualification Record (WPQ) and assign unique ID to the welder as per Codes and Customer Specification
• Maintaining Welder Continuity Record
• Witness Welder qualification test (WQT) & procedure qualification test (PQR)
• Witness Mechanical test (Tensile test, Bend test, Impact test, Hardness test, Ferrite test, G48 Corrosion test, Macro & Micro structure etc,.) conducted for PQR & WQT, Ferrite Test, Positive material identification test conducted on fabricated parts. Final weld visual inspection of all fabricated product
• Pre-judgments of PWHT Joints, Witness PWHT and review PWHT charts
• Monitoring Welding parameters during WQT, PQR and Production weld
• Preparing List of Welders and Welding operators every month, Welder Evaluation Sheet, Welding Surveillance report daily and monitoring the Performance of the welder daily
• Preparing Weld Metal Consumption Calculations for special welding consumables. Raising Purchase indent with Technical Delivery Condition for special welding consumables. Monitoring stores and shop floor for proper usage of filler metals. Preparing and Monitoring of baking, holding temperature and time of filler metals as per manufacturer recommendation
• Review of WPS, PQR & WPQR submitted by vendors
• Monitoring calibration status of welding machine, inspection testing tools and pressure gauges

NDT:

• Witness NDT conducted (PT, MT, UT, PAUT)
• Radiography film Interpretation of WQT, PQR coupons and production joints
• Analysis RT repair percentage every moth and take necessary action to minimize that
• Monitoring NDE equipments calibration and periodic verification log

Insulation:

• Inspection of pipe insulation for Heat conservation, electrical tracing, cold insulation and personal protection (Material Handled: Armaflex, cellulorglass, SS)

Job Objectives

To support AML (Anti-Money Laundering) Projects/CRs for Singapore and Regional entities

Key Responsibilities

• Participate in end-to-end projects for system implementation of machine learning system

• Engage and collaborate with Architects, Security and Development Lead to ensure solution design complies with enterprise design principles, security and control standards

• Liaise with application teams across group and countries build the enhancements according to the technical solution plan

• Analyse user requirements and convert requirements to design document and other system documentation to capture key design decisions.

• Ensure scalability and maintainability of applications

• Plan technical deliverables, perform design and development works to meet project’s requirements within schedule

• Perform data mapping and process mapping with interfacing applications

• Escalate issues that impacts project schedule on timely basis and propose workarounds/resolutions

• Create technical documents for the solutions. Compile timely, comprehensive, and accurate documentation as requested

• Test, maintain and recommend software improvements to ensure strong functionality and optimization

• Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

• Partner with Test Management teams to ensure completion of SIT, UAT, performance / load testing and application security testing

• Liaise with other application teams and business users to prepare test data to support test scenarios

• Manage project change request approval windows and deployment schedule

• Facilitate and provide technical and testing support before and after production deployment

• Liaise with other units across IT and Business in the organization

• Manage external vendors for project delivery within schedule

Key Requirements

Must Have

• More than 10 years assuming techno functional role in compliance technology(preferred) or risk/finance technology

• At least 14 years of experience in application and process design

• Ability to multitask effectively and handle large amounts of data

• Moderate SQL skills are required

• Highly driven, pro-active and a strong team player

• Excellent interpersonal skills and written and verbal communication skills in English

Good to Have

• Experience in Hadoop ecosystem and technologies

• Experience in NoSQL database or Big Data

• Experience in Git, Jenkins, JIRA

• Experience in SharePoint and Confluence

• Experience / knowledge in Unix Shell Scripting, Oracle, Java and Python, Spark

•

Responsibilities:

• Assist Resident Engineer in daily close supervision and coordination duties on Building Services mechanical and electrical

• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications

• Keep quality records of all works, monitor and report on work progress

• Responsible for the consistency of quality assurance inspections and testing for works

• Implement quality assurance plan in a well-coordinated manner

• Coordinate with Contractors on execution of works

Requirements:

• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore

• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project, or solid waste management or water infrastructure projects in Singapore.

• The candidate will be assigned duties mainly for Building services (BS) works for both mechanical and electrical aspects, hence candidate to be well versed in BS trade.

• Areas of supervision may include: sanitary and plumbing, fire fighting, ACMV, Electrical distribution, power generation, lighting design, security systems, EVC system, ISMS, ViMS, CCTV, FIDS, BACS, IBMS etc

• Familiarity with BIM software is an advantage

About the job

Company Description

Explore the future of communication and finance with Vama – a cutting-edge app that integrates instant messaging and secure payments, incorporating the latest Fintech technology.

Role Description

This is a full-time on-site role for a Software Quality Assurance Engineer at Vama in Singapore. The Software Quality Assurance Engineer will be responsible for software quality, quality assurance, software development, manual testing, and ensuring the highest quality of software across mobile (iOS and Android), desktop (React Electron), and cloud platforms (GCP). You will work closely with development teams to create and execute test plans, identify bugs, and ensure a seamless user experience.

Key Responsibilities:

• Designed, developed, and executed detailed manual test plans, test cases, and test scripts for iOS, Android, and React Electron desktop applications.
• Perform functional, regression, and exploratory testing to identify defects and ensure product stability and performance.
• Collaborate with cross-functional teams, including developers, product managers, and designers, to understand product functionality and requirements.
• Participate in test planning, estimation, and coordination of testing activities within an Agile development environment.
• Identify, document, and track bugs using QASE or similar test management tools.
• Verify bug fixes and ensure they meet the required specifications.
• Integrate testing processes with continuous integration pipelines (CircleCI) for improved development workflows.
• Ensure proper documentation of testing results and provide feedback for product improvements.
• Test cloud-based applications hosted on Google Cloud Platform (GCP), ensuring scalability and performance requirements are met.

Requirements:

• Experience in Manual Testing: Proven experience in manual testing across web, mobile (iOS/Android), and desktop (React Electron) applications.
• GCP Expertise: Strong knowledge of Google Cloud Platform (GCP) and testing cloud-based applications.
• Mobile Testing: Experience in testing mobile applications on iOS and Android platforms.
• Desktop Testing: Experience with desktop applications, particularly React Electron.
• Test Management Tools: Proficiency with QASE or similar test management platforms for documenting and managing test cases.
• Continuous Integration Tools: Hands-on experience with CircleCI or other CI/CD tools.
• Strong Analytical Skills: Ability to analyse complex systems, debug issues, and provide detailed reports.
• Attention to Detail: A meticulous approach to testing to ensure all edge cases are covered.
• Collaboration: Strong communication skills and ability to work in a team-oriented environment.

Qualifications

• Software Quality, Quality Assurance, and Software Quality Assurance skills.
• Experience in Manual Testing and Software Development.
• Strong analytical and problem-solving abilities.
• Knowledge of testing methodologies and tools.
• Effective communication and collaboration skills.
• Attention to detail and accuracy.
• Bachelor's degree in Computer Science or related field.
• Certifications in quality assurance are a plus.

Senior Analyst, Actuarial

Job Summary:

This is an individual contributor role where the Senior Analyst will report to the Director and be responsible for actuarial modelling & analysis to ensure accurate & timely IFRS17 financial reporting as well as maximize value for the company. The Senior Analyst will collaborate with other sections within the Singapore team, Regional/Corporate Office/HuBS colleagues as well as work directly with the Chief Actuary. The role allows for maximum exposure to other team leaders within the Singapore actuarial team and across business functions, as well as providing excellent career development opportunities for strong candidates. This is a unique opportunity to help the Singapore business grow its presence within the High-Net-Worth market space while managing its business profitability and risk levels. We offer a competitive benefit package and actuarial exam support.

Key Responsibilities:

• Production of IFRS17 actuarial reserve, LICAT capital calculations and other management reporting deliverables for a business line to be submitted to Regional/Corporate Office during quarter close
• Conduct robust analysis into the Drivers of Earnings of the business pre and during quarter close, including collaborations with ALM, Finance, Investment and Regional/Corporate teams
• Quantifying and analyzing sensitivities of the business to identify any potential vulnerabilities, as well as collaborating with ALM, Finance, Investment and Regional/Corporate teams to implement mitigating strategies
• Building out a robust process and implementation of LICAT capital calculations, while collaborating with a Regional/Corporate Office/HuBS colleagues
• Collaborate with centralized modeling team to maintain and enhance existing and new actuarial valuation models, as well as help in implementing new product initiatives
• Collaborate with other employees to build and enhance processes to ensure efficient workflows and a strong control environment
• Conduct any ad-hoc risk quantification & analysis and contribute to mitigation strategies and alternatives.
• Additional duties as may be required from time to time by Senior Management.

Job Requirements

• Minimum of 5 years of experience in Life Insurance industry
• Actuarial exam progression with a recognized international actuarial body
• Experience with IFRS17 is preferred
• Experience with any valuation and reserve/capital framework is required
• Experience and proficiency in Microsoft Office is required
• Strong technical skills and problem-solving ability, able to work in a dynamic environment
• Strong cross team collaboration skills
• Experience with Moody’s AXIS, Pathwise, Prophet or an alternative actuarial modelling software is preferred

We offer attractive salary, group life and group medical insurance; and excellent career development opportunities to the right candidate.

We are an equal opportunity employer and welcome applications from all qualified candidates. Application forms and resume will be kept for a period of 24 months after completion of the recruitment process. (All information will be held in strict confidence and only be used for recruitment purpose).

Roles & Responsibilities

• Generate inspection report, Certificate of Compliance (COC) and other relevant documents required for shipping
• Prepare inspection, Frist Article inspection report, other QC reports as specified in the quality plan
• Use ERP system (EPICOR) daily to accurately move and manage finished goods throughout the plant into inventory
• Convert raw files to PDF format; scan files and electronically store into various databases
• Carry out incoming, in-process inspection, outgoing inspection and planned dimensional checking of products as per quality plan
• Coordinate with production supervisors whenever product quality out of specification
• Any other ad hoc duties as per assigned by superior

Requirements

• Minimum GCE ‘O’ level & above
• Knowlege in basic computer skills, able to write reports, read engineering drawings
• Capable to operate measuring equipment such as calipers, toolmaker scope OGP (preferred but not required)
• Knowledge of quality system such as sampling rules (preferred but not required)
• Able to work as a team player, pro-active, self-motivated and high sense of responsibility.
• Working Location: Ubi area

Reporting to Contracts & Compliance (HOD), the C&C Senior Executive/ Assistant Manager is responsible for Contracts Review, Negotiation, and Compliance matters in the Research Division.

Main Responsibilities:

1. Oversee and Manage C&C unit

• Track and manage legal agreements, and maintain legal agreement database,
• Facilitate the negotiation and execution of legal agreements,
• Provide support to facilitate the training and guiding of staff on compliance (HBRA & PDPA),
• Act as check points for compliance (HBRA, PDPA) requirements by sighting compliance related approval documentation where necessary,
• Provide guidance to C&C unit junior staff,
• Improve contracts review workflow,
• Coordinate with CTE-CTO and LCDG (other contract teams in NCCS)
• Update and manage C&C policy.

2. Intellectual Property (IP) Management & Revenue

• Coordinate with SingHealth Intellectual Property (SHIP) unit for paperwork involving IP filing
• Track and monitor revenue from commercialised IP agreements.

3. Research Admin

• Broadcasting research related events to the research community on campus; provides administrative support for research events hosted by NCCS,
• Support HBRA and PDPA compliance matters (e.g. broadcast updates to NCCS stakeholders),
• Organise, coordinate and collate Research Metrics Info for submission to Office of Research, SingHealth (translational funding, IP and licensing indicatros)
• Support with KPIs collation for NMRC Centre Grant

Requirements:

• Bachelor of Science degree with a keen interest in contracts review, compliance & governance, and research administration.
• Must possess a flair for writing and a good command of English to handle minutes and draft policy papers/ presentation slides
• Excellent oral and presentation skills for effective communication with PIs, clinicians & peers in other departments
• Must be IT savvy and able to navigate through standard software applications and databases
• Familiar with HBRA and PDPA regulations
• Experience in reviewing contracts
• Must be meticulous and have good organisational skills to create / maintain detailed records.
• Independent worker with a strong sense of initiative

• Location: Raffles Place

• Working hours: 09:00 to 17:30 (Monday to Friday)

Compliance Executive (Internal Control, Corporate Governance)

The role is expected to support Compliance Deputy General Manager on compliance and internal control matters.

Job responsibilities:

• Manage and maintain compliance policies and procedures, including group procurement policies (including vendor due diligence, human rights management and supplier chain management)
• Design and monitor internal compliance controls to prevent violations of legal rules and internal policies, including undertaking regular reviews and providing practical improvement advice
• Develop and roll out compliance and internal control governance training and promote compliance communications awareness to employees
• Support colleagues in internal control advisory matters and promote internal control awareness
• Conduct research on the latest compliance risk trends and provide consultation to colleagues on ethical or compliance issues
• Maintain Compliance Department website for employees to reference when they have questions
• Collaborate with cross-functional teams to ensure compliance requirements are fulfilled in business processes and systems
• And any other tasks which is required by Deputy General Manager

Job requirements:

• Bachelor’s degree in accounting/finance, business administration or equivalent
• 2 - 3 years of relevant work experience in risk, compliance & internal control fields
• Experience gained through working in a multi-national organisation involved in Asia-pacific work is advantageous
• Responsible and detail-oriented, excellent communication skills and interpersonal abilities are required
• Good team player and is able to handle multi-tasks independently
• Willing to travel to countries in Southeast Asia and Australia at least once every half year

Interested applicants, please send your resume to Charlene (R22105303) at [email protected] with the email subject header "Compliance Executive".

We regret that only shortlisted candidates will be notified. Other applications will be updated in our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Please find our Privacy Policy Agreement in the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your kind understanding and co-operation.

Pasona Singapore Pte Ltd

EA License No:90C4069

(Lau Rui Lin, Charlene, EA Registration No: R22105303)

Accounts Management:

• Prepare and maintain financial statements, including balance sheets, income statements, and cash flow statements.
• Ensure proper accounting and recording of financial transactions in compliance with company policies and accounting standards.
• Oversee day-to-day accounting operations, including accounts payable, accounts receivable, payroll, and bank reconciliations.
• Manage the preparation and filing of tax returns, including VAT, income tax, and other statutory requirements.
• Assist in the preparation of budgets and financial forecasts.
• Perform regular financial audits and assist in external audits as needed.

Compliance Management:

• Ensure compliance with relevant laws, regulations, and industry standards.
• Monitor and update internal controls to prevent financial mismanagement, fraud, and non-compliance.
• Conduct compliance reviews and risk assessments to identify areas for improvement and potential legal or financial risks.
• Assist in the preparation of compliance reports for regulatory authorities and internal stakeholders.
• Keep up to date with changes in laws and regulations and ensure the organization’s practices remain compliant.

Reporting and Documentation:

• Maintain accurate and up-to-date financial records and supporting documentation.
• Prepare reports on financial performance and compliance status for senior management.
• Provide recommendations for improving financial and compliance processes and procedures.

Qualifications:

• Bachelor's degree in Accounting, Finance, Business Administration, or a related field.
• Relevant certifications (e.g., ACCA, CPA) are a plus.
• Strong knowledge of accounting software.
• Understanding of regulatory frameworks and accounting standards.
• Strong analytical skills with attention to detail.
• Ability to work independently and as part of a team.

Experience:

• Minimum of 2-3 years of experience in accounting roles.
• Experience in regulatory compliance, auditing, or risk management is preferred.

DUTIES & RESPONSIBILITIES

• To manage all regulatory compliance related matters and asset integrity within HBA Operations and Projects onshore support office. Liaison with HBA Management Centres.
• Work with the Asset Management team on continuous improvement for Compliance & Asset Integrity.
• Provides regulatory compliance and asset integrity advice to both the VP of Asset Management & Operations and all managers and staff at HBA Singapore Office, shore-bases and ongoing projects.
• Is a valued and contributing member of the Aberdeen management team, including the formulation and implementation of strategic objectives
• Supports the Company's mission and objectives to promote revenue, profitability, and growth.
• Establishes and maintains all HBA facilities' Compliance procedures and standards.
• Focal point for all operational HSE, Operational Verification and Class related activities and coordinates support to the Operations Management offshore.
• Responsible for preservation of plant capability, asset integrity and reliability for all operations surface facilities.
• Co-ordinates integrity management of all HBA AMO operated assets ensuring management systems have risk-based inspection programs
• Co-ordinates the delivery of all Asset Integrity engineering support to the Operations Management offshore
• Liaises with Facility Operations and Shore Support personnel to assist with understanding, defining and quantifying process technical issues to enable precise and relevant problem definitions to be drafted
• Ensures an effective audit and review process is implemented and managed, including evaluation of the audit reports and provision of recommendations for identified deficiencies
• Provides Management of Change (MOC) support I services to all operating assets in accordance with HBA AMO Operations Management System
• Member of the Operations Onshore Emergency Response team
• Operates within the OPEX budget as dictated by dedicated cost centre
• Ensures that compliance to the company management systems is followed
• Ensures compliance with the HBA AMO Safety, Health and Environmental Management Systems for all assets/facilities
• Develops, produces and controls all necessary technical documents and procedures
• Seeks continuous improvement in integrity management process through the implementation of best practice procedures, systems and programs.
• Provides regulatory compliance and asset integrity advice to both the VP of Asset Management & Operations and all managers and staff at HBA Singapore Office, shore-bases and ongoing projects.
• Is a valued and contributing member of the Aberdeen management team, including the formulation and implementation of strategic objectives
• Supports the Company's mission and objectives to promote revenue, profitability, and growth.
• Establishes and maintains all HBA facilities' Compliance procedures and standards.
• Focal point for all operational HSE, Operational Verification and Class related activities and coordinates support to the Operations Management offshore.
• Responsible for preservation of plant capability, asset integrity and reliability for all operations surface facilities.
• Co-ordinates integrity management of all HBA AMO operated assets ensuring management systems have risk-based inspection programs
• Co-ordinates the delivery of all Asset Integrity engineering support to the Operations Management offshore
• Liaises with Facility Operations and Shore Support personnel to assist with understanding, defining and quantifying process technical issues to enable precise and relevant problem definitions to be drafted
• Ensures an effective audit and review process is implemented and managed, including evaluation of the audit reports and provision of recommendations for identified deficiencies
• Provides Management of Change (MOC) support I services to all operating assets in accordance with HBA AMO Operations Management System
• Member of the Operations Onshore Emergency Response team
• Operates within the OPEX budget as dictated by dedicated cost centre
• Ensures that compliance to the company management systems is followed
• Ensures compliance with the HBA AMO Safety, Health and Environmental Management Systems for all assets/facilities
• Develops, produces and controls all necessary technical documents and procedures
• Seeks continuous improvement in integrity management process through the implementation of best practice procedures, systems and programs.
• Responsible for supporting the introduction and implementation of quality management systems as well as verification and audit
• Responsible for asset wide operations and maintenance standard setting
• Ensures statutory and Company standards of health, safety, welfare and security are met within areas of own responsibility

HEALTH, SAFETY AND ENVIRONMENT

Comply with HSE requirement documents listed below:

• Environmental Aspect and Impact Assessment Procedure
• Hazard Identification, Risk Analysis and Determine Control Procedure
• Health and Safety Management System Manual
• Environmental Management System Manual

COMPLEXITIES OF THE JOB

• Integrity management is the life cycle management of equipment and systems to ensure continued functionality without undue risk/harm to personnel, environment, and/or the asset itself.
• The longer-term payback and preventative nature of integrity management activities can provide for easy target in times of expenditure reductions.
• Company policy and philosophy on Integrity management must identify this and direct only justified activities that demonstrate value and provide valid results.
• Integrity management encompasses all aspects of organization and accordingly individuals should understand the roles they play from Corporate to the maintenance technician onboard. Overview presentations should be delivered at to all areas of the organization so that all are familiar with integrity management and the role they play.

REQUIREMENTS

• 15 years' experience in Oil & Gas facilities offshore (or similar) in Operations or maintenance capacity 5 years of which in Compliance & Asset Integrity Management at a senior level.
• In-depth knowledge of Asset Integrity.
• Extensive knowledge of maintenance, integrity and compliance in varying roles on both fixed and floating installations.
• Demonstrable experience in the implementation and management of the UKCS Safety Case Process, Safety and Environmental and Quality Management Standards.
• Knowledge of facilities engineering, production engineering, maintenance engineering, marine operations and planning functions.
• In depth understanding of Legislation codes and standards applicable to the operation of offshore platforms in the UKCS.
• In depth understanding of Class Society rule sets.
• Development and implementation of risk-based Integrity Management strategies.
• Knowledge and understanding of hydrocarbon industry applicable NDT techniques and principles.
• Effective manager of key financial issues that impact overall operation functions and the business.
• Must possess excellent communication skills and be able to demonstrate skills in problem solving, team building, negotiation, total quality management, ingenuity and initiative.
• Must possess knowledge of business and operational planning processes.
• Minimum Bachelor's degree in relevant field.

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery. Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Compliance Executive (Corporate Governance, Risk, Compliance & Internal control)

Job Summary
The role is expected to support Compliance Deputy General Manager on compliance and internal control matters

Job Description
• Manage and maintain compliance policies and procedures, including group procurement policies (including vendor due diligence, human rights management and supplier chain management)
• Design and monitor internal compliance controls to prevent violations of legal rules and internal policies, including undertaking regular reviews and providing practical improvement advice.
• Develop and roll out compliance and internal control governance training and promote compliance communications awareness to employees.
• Support colleagues in internal control advisory matters and promote internal control awareness.
• Conduct research on the latest compliance risk trends and provide consultation to colleagues on ethical or compliance issues.
• Maintain Compliance Department website for employees to reference when they have questions.
• Collaborate with cross-functional teams to ensure compliance requirements are fulfilled in business processes and systems.

Job Requirement

• Bachelor’s degree in accounting/finance, business administration or equivalent.
• 1 years of relevant work experience in risk, compliance & internal control fields.
• Experience gained through working in a multi-national organisation involved in Asia-pacific work is advantageous.
• Responsible and detail-oriented, excellent communication skills and interpersonal abilities are required.
• Good team player and is able to handle multi-tasks independently.
• Willing to travel to countries in Southeast Asia and Australia at least once every half year.

Interested applicants pls send in a copy of your resume with your current, expected salaries and availability in Microsoft Word format to Low See Wei (R1551122) for immediate processing.

Kindly indicate in your email subject title as "Job Application for 19398 Compliance Executive (Corporate Governance, Risk, Compliance & Internal control) SW228"

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities

Thank you.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: QC Assistant/ Executive
• Working Location: Woodlands (Nearest MRT: Admiralty)
• Working Hours: Monday to Friday, 8.30am – 5.30pm
• Salary Package: Up to $2,900 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Plant hygiene control & factory checking.
• To perform QC check such as microbial check, sensory, & visual checks on raw materials and all finished products produced by the seasoning manufacturing line.
• To do in-house verification/ calibration on the equipment.
• To maintain QC laboratories.
• Any other work as shall be assigned by the Company from time to time.

APPLY NOW!!!

• At least Diploma with Food Science or related discipline.
• Preferably with 1 year of related working experience.
• Able to start immediately or in short notice.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71209 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

• Supervise and oversee junior team members and review their work product
• Review and draft compliance documents, frameworks and templates, covering all aspects of regulatory compliance
• Analysing and summarising MAS publications and regulatory updates
• Develop training programs, with opportunities to provide training to clients
• Other ad-hoc duties as required

• Manage a portfolio of clients
• Provide advisory and consultancy services to clients
• Submit and/or review of regulatory filings and notifications
• Liaise and correspond with MAS and auditors
• Periodic compliance reporting to senior management or board of directors
• Provide or review compliance manual
• Provide or review compliance checklists, registers, and calendar
• Prepare and review regulatory returns and forms
• Perform ad-hoc projects, including but not limited to regulatory mock inspections, AML/CFT CDD checks
• Other ad-hoc duties as the need arise

The Quality Governance Lead is responsible for overseeing and ensuring the consistency, accuracy, and reliability of financial, project, and operational data across the organization. This role involves developing and managing dashboards, early alerts, and quality governance reporting, as well as driving corrective actions based on key project and financial indicators. The lead will work closely with PQE lead, Quality Leads, SBG Quality Council Leads/members, LOB leads, Delivery Lead, Client Service Leads, Client Delivery Leads, project managers, finance teams, and senior leadership to ensure quality control and mitigate risks. This role ensures that the organization maintains a proactive, data-driven approach to quality governance, driving transparency, accountability, and risk mitigation across all projects.

What will you do? 

1.    Dashboards and Early Alerts:

• PowerBI Dashboards: Develop and maintain interactive dashboards using PowerBI to track key project and financial metrics.
• Early Alerts: Establish systems for early alerts regarding critical issues such as:
  • Missing or inaccurate forecasts (ETC)
  • Manpower cost trending anomalies
  • Consistent variance between actuals and forecasts (Day 2)
  • Past fiscal year trends vs current forecasts (Day 2)
  • High unbilled revenue
  • Aging receivables and poor collection trends
  • EAC (Estimate at Completion) margin erosion and activate Watchlist
• AI Exploration: Explore and implement AI-driven models to predict potentially troubled projects and identify areas for intervention.

2.    Watchlist Management:

• Develop and manage the Watchlist for at-risk projects or financials, categorizing them into:
  • Orange (High attention needed)
  • Red (Immediate action required)
  • BRC - Projects need budget revisions
• Provide regular updates and insights to PQE lead and Global Service Lead and other stakeholders regarding projects on the Watchlist and recommend corrective actions.

3.    Quality Governance Reporting:

• Monthly Business Review (MBR): Oversee the preparation of MBR reports, delivering key insights into project status, financial performance, and emerging concerns.
• Quarterly Business Reviews (QBR): Lead the preparation of QBR reports, providing insights into project health, financial performance, and areas of concern.
• Audit and Risk Committee (ARC): Provide detailed reporting and analysis to the ARC on project and financial performance, including risk mitigation and governance practices.
• Board Reporting: Prepare concise, impactful reports for the Board, focusing on critical project and financial health indicators, trends, and risks.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a MNC in biotechnology industry. They are looking for a Trade Compliance Manager to join their Compliance Team for the next phase of their business. They are located in West.

Roles & Responsibilities

• Ensures compliance with regulatory authorities, including customs, export control, and tax agencies, while maintaining accurate documentation and procedures in alignment with relevant laws.
• Evaluates internal controls, designs processes, leads compliance audits, and manages corrective actions for the region. Pinpoints compliance deficiencies and suggests areas for improvement.
• Assists in creating and sustaining localized policies for import/export compliance, while ensuring company-wide awareness of regulatory requirements.
• Develops business processes that mitigate compliance risks, focusing on continuous improvement for increased efficiency and enhanced customer service.
• Tracks and reports key performance indicators (KPIs) and compliance metrics to senior leadership, while managing daily import and export compliance reports for the region.
• Establishes the overall budget, operational plans, and priorities for the assigned compliance functions.
• Manages regional compliance projects, including defining scope, budget, scheduling, and addressing project risks for both import and export activities.

Requirements

• Bachelor's degree and above
• Posses Customs broker license is a bonus
• Minimum 10 years of experience in trade compliance with 5 years of management experience
• Worked in medical devices or related industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)