Responsibilities:

• Design and produce single line diagrams of electrical/instrument system and determine the interface/termination diagrams in accordance with equipment specifications.
• Size cables and breakers LV/MV according to applicable rules and regulations.
• Review all electrical equipment, vendor’s proposals for technical accuracy and constructability
• Prepare material take off for bulk material orders of power and control cables, cable trays and ladders and various ship electrical equipment and systems according to project contract specifications.
• Prepare electrical equipment foundations/supports and room arrangement/layout, lighting layout, power/control cableway plan, power/control cables routing plan and cable schedules.
• Interface, size and design electrical equipment capacity e.g. switchboards, transformers, navigation, PABX, LAN and fire & gas systems, etc.
• Prepare electrical installation construction standard according to IEC/IEEE shipbuilding practice and international standard.
• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.
• Provide progress reporting and schedule management of engineering deliverables.
• Coordinate with other production team members, subcontractors and consultants to resolve technical issues onsite which affect the electrical schedule and project deliverables.
• Perform site visits to solve engineering problems when required to determine existing conditions or verify new construction.
• Meet with vendors, client reps, accreditation representatives when required.
• Review and reply to class comments
• Perform any other tasks as may be assigned by the supervisor
• Ensure compliance to relevant government regulations and company’s quality, safety, health and environmental (QSHE) policies, practices and procedures at all times.

Requirements:

• Minimum 3 years of relevant experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers and a Diploma in Electrical Engineering or related engineering discipline or minimum 6 years of experience working in a marine/offshore industry either with shipyards or marine equipment manufacturers.
• Familiarity with Marine & Offshore rules, regulations and requirements.
• Knowledge of Intergraph Software will be an added advantage.
• Good communication skills, meticulous, resourceful, able to multi-task

RESPONSIBILITIES
Able to utilize advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

- Provide support to operations maintenance staff in their work flow, maintaining, repairing and installation of HVAC units and Refrigeration systems. (Main tasks of the job scope)

- Mechanical general work

- Other ad-hoc duties as assigned

Job Requirements:

- Monday to Friday, 8am to 5pm

- Saturaday, 8am to 12pm

- Must be able to support OT on weekdays / weekends if needed

Interested applicant, please resume to [email protected]

Benefits:

• Working Hours: 8 am-6 pm (6 days)
• 14 days Annual Leave after confirmation
• 14 days Medical Leave (completion of 3 months service)
• $200 medical claim per year
• Performance Bonus (Discretionary)

Job Description:

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s Degree in Civil Engineering / Geology or relevant vocational certificate
• Able to speak and write in English and Chinese in order to communicate effectively with Chinese-speaking clients and associates.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, self-driven and willing to take responsibility for assigned tasks as project engineer/manager
• Preferably Engineer specialized in Engineering / Civil / Construction / Structural or equivalent
• Only Singaporeans

You may send your resume / CV to email address directly:

[email protected]

Project Engineer

This role is a newly expanded role for a European MNC who is a APAC leader in industrial and material handling products, services, and solutions for various application such as automated warehousing, building maintenance, automotive and others. Come join this role and be part of the active players in this growing industries

Key Roles and Responsibilities

· Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.

· Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.

· Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.

· Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects

· To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document

· To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

· Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.

· Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule

· Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.

· Be the primary focal point between various parties

Qualifications & Experience

· Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

· Self-starter and ability to self-manage strong interpersonal and leadership skills

· Must have high level of integrity, able to generate trust and build alliances with co-workers

· Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures

· Ability to maintain good project documentation and is familiar with ISO documentation requirements

· Safety certifications such as Working at Height, Construction Safety Orientation Course etc. is advantegeous

· Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT

· Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

If you are keen to apply for this role, please click auto-apply

HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)

Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

5. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them

6. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.

7. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

PRISM+ is the largest Singaporean direct-to-consmer smart home appliances brand. Our mission is to offer cutting-edge products to the masses at affordable prices. We are a rapidly growing, ever-evolving organisation, and we are seeking new teammates to join us on our exciting journey.

Responsibilities:

• Manage existing Salesforce user accounts and handle provisioning for new users, ensuring proper access controls and configurations.
• Liaise with Salesforce Account Executives (AEs) on contract, billing, and licensing issues, ensuring smooth communication and resolution.
• Understand user processes across different business functions and translate them into technical design flows.
• Prepare and propose Statements of Work (SOW) for external partners (approximately 20% of the role).
• Develop and implement custom Salesforce flows and processes for internal use (approximately 80% of the role)
• Provide daily troubleshooting of Salesforce issues, errors, and failures to ensure minimal disruption to business operations.
• Design and plan user interfaces for ServiceCloud, ensuring a seamless and intuitive user experience.
• Continuously improve and optimize Salesforce workflows, processes, and user interfaces to drive efficiency.
• Identify areas for continuous improvement within Salesforce processes and workflows to enhance user productivity and experience.

• 3-5 years of hands-on experience as a Salesforce Engineer or similar role, with a focus on ServiceCloud and Field Service.
• Expertise in Salesforce Field Service with a deep understanding of Work Orders, Service Appointments, FSL Flows, and Work Order Line Items.
• Strong proficiency in Salesforce Flow, APEX, and Lightning components (Aura).
• Experience in ServiceCloud contact center setup and ongoing maintenance.
• Proven ability to work closely with both technical teams and business stakeholders, translating user processes into effective technical solutions.
• Excellent troubleshooting and problem-solving skills.
• Experience working with Salesforce Account Executives (AEs) on contracts, billing, and licensing issues is a plus.

The incumbent is responsible for managing all phases of the project activities including planning, implementation, execution and completion of gas and chemical supply equipment, installation and certification. He/She will have direct interface with the Project Manager or FAETH associated companies

JOB DESCRIPTION

• To manage, lead and control multi-projects.
• Direct interface with customers or sub-contractors for all aspects of their project contract and schedule including organising the project meeting for technical presentations, contract reviews and design reviews and providing project progress reports for management or customer review.
• Direct interface with other Faeth associated companies in managing the resources and obtain the necessary engineering, design or process information required to manufacturer, install and qualify the system and equipment.
• To take charge in project planning and implementation including developing detailed project plans defining project task and to manage project resource allocation and project budget, scheduling of project timelines and tracking of project deliverables to meet the project targets.
• To liaise and manage suppliers and subcontractors to complete system or equipment installation works.
• To coordinate with the onsite subcontractors, Faeth team and the customer for equipment testing, operation and commissioning activities.
• To observe the Quality Management function and Project Quality Plan (QMS/PQP) and Safety Management System (SMS) and requirements throughout the project.
• To implement best practices throughout the project sites and participate in discussions with the teams for effective management and utilisation of constrained resources.
• To prepare and manage all safety inclusive of Work Method Statement, Risk Assessment, Permit to Work and others permit associated with the work.
• To prepare, manage, and maintain service reports & permits to work as required by the customer for equipment related items.
• To work towards the project schedule as planned and ensure that the equipment works as per the contractual specification.
• Commissioning activities as planned plus ensuring that the equipment works according to its specifications.
• To prepare, collect, review, manage, and maintain project design and start-up documentation (certificates, test sheets, etc) with customers, consultants and the authorities required by customers for final acceptance of the system or equipment.
• To ensure the certification of all systems and equipment supplied to the customer.
• Responsible for acting on, and solving all design or start-up related issues and customer complaint as swiftly as possible, with a minimum of inconvenience to the customer, and to keep the customer and Project Manager up-to-date on actions taken, together with a time plan for which the identified issues can be resolved.
• To perform maintenance and calibration and sampling tasks / duties as per Standard Operating Procedures (SOP) and Working Instructions (WI) as required.
• To perform preventive and corrective maintenance as scheduled; attend to unplanned downtime or breakdowns across all Faeth equipment & systems and dispatch personnel as required.
• To investigating problems, diagnosing/repairing faults and carry out field troubleshooting and repair of Faeth products at customers’ site both locally & overseas including component ordering.
• To provide training to end customer for Faeth equipment supplied based on the user manual, providing technical instruction and assistance to customer regarding installation, commissioning, operation, repair and maintenance of equipment.
• To collect feedback on customer’s experience or products quality issues and report to Product Design Team for product improvement.
• Upon completion of a project to participate in post mortem meeting with management for evaluation of the project results and project problem faced and provide recommendations to Management for future improvement.

JOB REQUIREMENTS

• Diploma/degree in Mechanical/Electrical/Chemical or equivalent
• At least 1 to 2 years’ experience with strong understanding of project planning, project management functions, sourcing and technical planning in semiconductor, oil & gas field.
• Fresh Graduates are welcome to apply for the position.
• Ability to communicate and interact with people at all level and to work cross functionally.
• A team player and a self-starter with the ability to work independently with minimum supervision.
• Strong analytical, planning, oral and written communication and interpersonal skills.
• Able to work in a fast pace and dynamic environment.
• Knowledge of Microsoft Project, AutoCAD or equivalent CAD/3D Software desired but not a must.
• Willingness to travel and be site-based.

An attrative remuneration package with comprehensive insurance coverage awaits the right candidate.

• Responsible for all site works and activities
• Ensure effective project planning and implementation, efficient use of resources, and proper co-ordination and delegation of works to successfully complete project by the contractual deadline and within the budgeted cost.
• Ensure all works carried out meet company’s quality standards and requirements
• Engage and coordinate internal resources, engineers, consultants, and solar installers in preparation and execution of project plans through completion.
• Review and take ownership of project budgets including cost of permits and fees, third-party consultants, and construction costs for off-site, site work.
• To ensure site supervisors, foremen and workers comply with client & regulatory requirements
• To ensure high Environmental, Safety and Health standards are upheld on site at all times
• Other ad hoc duties assigned by company from time to time

Job Description

• Oversee the smooth and efficient operation of inorganic chemicals' production
• Evaluate customers' orders with Team Leader and create production schedules to meet deliverables
• Oversee the planning and ordering of Anhydrous Ammonia (skid tanks/cylinders)
• Keep track of NH3 and NH4OH Performance Matrix and account for deviation/breaches captured by the matrix
• Supervise the manufacturing processes are done in a safe and efficient manner
• Oversees and assess the existing processes, workflows and optimizes them through designing, implementing and testing new procedures
• Conduct R&D work for new product/process
• Ensure all production and testing records are properly verified and documented
• Compiling status, performance reports and submitting them to management in a timely manner
• Diagnose problems in the production line and provide recommendations, solutions and necessary training
• Formulate yearly maintenance plan and ensure all maintenance activities in the plant are appropriately carried out
• Ensure all inspection and certification of all pressure vessels are done and properly recorded
• Assignment of delivery escorts to the respective clients and qualification of the delivery escorts
• Review the delivery escorts competency and make appropriate changes
• Ensure safe working environment within the production area
• Perform inventory checks on a monthly basis
• Administer the ISO 9001:2015 system
• To lead on sites ammonia project (eg purging/charging) which includes project planning and execution. These projects entail certain risks and danger during emergency response mitigation and rescue operations
• Demonstrate and encourage a disciplined approach to compliance in all elements of the Company policies, processes and procedures
• Ensure outgoing product meet customers' requirements and specifications
• Review and generate Risk Assessment for all tasks
• Review and generate Safe Work Practices (SWP) for all tasks
• Conduct safety training for the NH3/NH4OH related process to technicians/operators/escorts
• Respond to customers' queries relating to safety, quality and deliverables
• Raise Correction Action Request (CAR) to problematic vendors
• Foster a respectful and collaborative work environment with all co-workers and vendors
• Respond to off hours critical calls to resolve facility/equipment issues
• Sourcing, review and purchase of Ammonia related equipment, accessories and spares
• Any other duties and responsibilities as may be assigned by the superior or Management

Job Requirements

• Candidate must possess at least Bachelor's Degree in Engineering (Chemical) or equivalent
• At least 5 years of working experience in the related field
• Preferably Executive level specialized in Engineering - Chemical or equivalent

SMARTr International Pte Ltd is looking for a Sales Engineer to join our team.

Key Responsibilities:

• Work closely with the Engineering Sales Manager.
• Possess technical knowledge in mechanical engineering.
• Provide technical consultation and support to customers, understanding their requirements and offering suitable solutions.
• Prepare and deliver technical presentations, proposals, and product demonstrations.
• Provide sales support and assist in troubleshooting technical issues.

Fresh gratuates with Diploma in Mechanical Engineering or gratuate from ITE, Polytechnic are welcome to apply.

Working Days: Monday - Friday

Working Hours: 8.30am - 6.00pm

13th month bonus

An established chemical manufacturing company in Jurong has an immediate vacancy for:

PRODUCTION ENGINEER

The Job

· Effective management of the production operations.

· Ensure effective and efficient use of materials, manpower, machines, and equipment so as, to minimize wastage, reject downtime, and reworks.

· Implement quality, safety, and environmental policies to comply with company and statutory regulations.

· Continually seek to improve productivity by recommending and initiating policies, procedures, and methods.

· Meet or exceed customer requirements, not limited to quality standards and delivery.

· Performs other duties as assigned.

Requirements

· Degree/Diploma in Chemistry or Chemical Engineering

· 2 – 3 years relevant experience in chemical manufacturing.

· Working knowledge of ISO, OHSAS, and Halal standards.

Interested applications are to e-mail your detailed resume indicating present and expected salary to :

The Advertiser

e-mail: [email protected]

Only shortlisted candidates will be notified.

Responsibilities:

• Site preparation and co-ordination, preparation of submission documents.
• Coordinate, liaise and manage various project stakeholders including customers, consultants, sub- contractors, vendors, etc. on site to ensure project requirements are met.
• Able to communicate effective to all stakeholders.
• Prepare and create detail work schedule, manpower and resource planning.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Coordinate the safety management system on site.
• Follow up and reporting on the project progress.
• Able to understand Singapore standards or Code of Practice.
• Ensure all site execution with valid approved drawing, Architect Instruction, Engineer Instruction, Written Instruction from client/ main contractor representative.
• Carried out assignment as detailed by the Senior Manager / Project Manager / Assistant Project Manager.

Requirements:

• Candidate must possess at least Diploma/Advanced/Higher/Diploma/ Degree in Electrical & Electronic in any engineering field or equivalent.
• Min. 2 years relevant experience in the Construction Engineering industry.
• Proficient with computer technology and Microsoft Office application (MS PowerPoint, Excel, Project)
• Knowledge in AutoCad, Revit, Naviswork, BIM360 or other design software with strong understanding of Drawings
• Fluent in English, both written & spoken and able to communicate with all levels of team members
• Independent, resourceful, pro-active and team player in a fast-paced environment.
• Possess good organization, planning, strong interpersonal, communication skills and project management skills
• Ability to work under tight deadlines
• Ability to interact effectively with project members and managers at all levels.
• Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commmissioning, Maintenance Testing) will be an added advantage.

1. Closely supervises and monitors the work with the Project team to ensure that the project proceeds according to the contract and deals with any queries, problems and claims that might arise.

2. Coordinate with client for the project interface activities.

3. Interpret Construction and Technical Drawings.

4. Involved in all site meetings.

5. Liaise with site HSE personnel to ensure corporate policies, practices and procedure one met.

6. Managing project deliverables in line with the project plan.

7. Managing project scope and change control with commercial or without commercial impact.

8. Monitoring project progress and performance.

9. Plan monthly works schedule and set productivity to be achieved.

10. Prepare MSRA

11. Progress Claim and monitor invoice status

12. Project Planning, Progress Reports and Claims.

13. Providing status reports to the management.

14. Review and monitor construction activity schedule including the analysis of costs, progress and other productivity data.

15. Supervise/review/prepare all final reports including as built drawings, material reconciliation, close out, etc. relating to the assigned project

16. Technical evaluation of vendor quotation.

17. To initiate and undertake action to prevent the occurrence of non- conformity.

18. To instill ownership priority & timely manner at our culture to work safe and achieve higher quality.

19. To lead and control the workmen to carry out task for installation, fabrication, testing and commissioning of process plant electrical and instrumentation.

20. To monitor the progress of projects against planned

21. To plan, monitor and ensure manpower, materials, equipment and tools are ready for day-to-day work activities.

22. Update and report daily progress status and lookahead minimum 3days plan.

23. Working closely with main contractor and client to ensure the project meets the required needs.

Job Description
To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring, and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials, and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements.
• Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Job Requirement

• Degree in with degree in Civil, mechanical or equivalent
• At least 1 - 2 years relevant experience in construction site
• Prior experience in Refinery / Process Plant on Civil and/or Mechanical projects execution will be advantageous

Job Scope

• Manage and execute project in cost effective, on time delivery with quality standards to meets client expectations;
• Managing the projects in accordance to our Company’s ISO 9001, ISO 14001 & OHSAS 18001 Standards and contractual requirements;
• Pre and post-contract stages from vetting tender documents, organizing tender activities as well as settlement of accounts with owner, sub-contracts / suppliers;
• The development and implementation of project management plans through the provision of project scheduling, monitoring, reporting and forecasting, ensure that safety regulations are complied;
• Providing and preparing all scheduling, budgeting and specification for the project work;
• Check drawings and quantities and ensure that the calculations are accurate for the project implementation;
• Carry out project planning, cost control, project management and documentations;
• Provide the direction in construction planning, coordinate work with other departments, sub-contractors, clients and consultants to ensure overall construction progress as scheduled;
• Liaise and assist in submission of all necessary permit, license to all relevant authorities for the project work;
• Attend meetings, correspondences and liaise with clients, sub-contractors and suppliers;
• Resolve design and site problems encountered during the construction period;
• Plan and manage actual and post construction issues with the clients, consultants, sub-contractors and relevant authorities;
• Ensure proper documentation of the project, such as record correspondence, as-built drawings, etc..;
• Close supervision of work carried out by sub-contractors and suppliers to ensure adherence to project schedule;
• Ensure highest quality on the work carried by the sub-contractor, fabricators and suppliers;
• Liaise with consultants, clients, sub-contractors and suppliers on the implementation of the projects;
• Check on the progress claim submitted by the sub-contractors;
• Monitor, track, report project progress, supervise Engineers, Supervisor, Technicians and sub-contractors’ on site;
• Follow-up on the defective work and ensure timely rectification by contractors, fabricators and suppliers;

Job Requirement

• Recognized Degree by BCA in Civil Engineering.
• Experience in Civil Engineering Projects, especially in Marine Construction of Jetty, Wharf, Harbour, Dredging, etc.

Responsibilities

• Data Collection & Reporting: Assist in gathering, organizing and analyz-ing data from web based data, focusing on key performance indicators such as waste and recycling tonnage.
• Liaising with operations: Work closely with operational teams ensure timely and accurate submission of operations data. Provide support and guidance to operations as needed to improve data reporting processes.
• Data Accuracy & Quality Assurance: Perform regular data quality checks to verify accuracy, completeness, and consistency of sustainability data. Identify discrepancies or issues and work with local teams to resolve them.
• Updating of route plan masterlist: Assist in the updating process for new collection data points.
• Liaising with estate managers: Provide estate managers sustainability data in a timely and accurate manner.
• Data Entry & Updates: Ensure that all sustainability data is entered into the relevant tracking systems on time and in line with reporting sched-ules.
• Develop & Maintain Reporting Tools: Assist in creating and maintaining data dashboards and reports that provide real-time insights into sustaina-bility performance.
• Reporting Support: Help prepare periodic sustainability reports and presentations for internal stakeholders
• Collaboration & Communication: Work closely with customer service team to serve as a joint point of contact for sustainability data
• Ad-hoc Project Support: Assist with various sustainability initiatives and projects as required, providing data support and helping to implement new programs or processes

Requirements:

• Have at least 1-2 years of experience in sustainability data or related fields.
• Graduated from a diploma program in Environmental Science, Sustaina-bility, Engineering, Business, or a related field.
• Strong analytical skills, with experience in data collection, cleaning, and analysis.
• Proficiency in Microsoft Excel, Google Sheets. Data analysis tools (e.g., Power BI, Python) is a plus but not required.
• Interest in sustainability and environmental impact, with a willingness to learn and contribute to global sustainability efforts

Purpose: To design, develop, and implement automation solutions for system integration and machine assembly processes to enhance productivity, minimize human errors, and ensure high-quality outputs. The role will focus on leveraging AI and robotics to achieve automated assembly and inspection solutions.

Key Area of Responsibilities:

• Design and implement robotic systems for automated assembly processes.
• Develop AI-driven solutions for process optimization and defect detection.
• Evaluate current manufacturing processes to identify automation opportunities.
• Collaborate with cross-functional teams to integrate automation into existing workflows.
• Integrate robotics and AI systems with MES systems for real-time monitoring and control.
• Ensure seamless communication between automation systems and other manufacturing tools.
• Diagnose and resolve issues with automation systems, including robotic arms and AI algorithms.
• Conduct regular maintenance to ensure system reliability and minimize downtime.
• Train technicians and operators on the use of automated systems.
• Create and maintain technical documentation, including user manuals and troubleshooting guides.
• Ensure automation solutions comply with industry safety standards and company policies.
• Perform risk assessments to identify potential hazards and implement safeguards.

Qualification & Experiences:

• Bachelor’s or Master’s degree in Automation Engineering, Robotics, AI, Mechatronics, or a related field.
• Minimum 3-5 years of experience in automation engineering with a focus on AI and robotics.
• Proven track record in designing and deploying robotic systems and AI-driven inspection tools.
• Proficiency in programming languages like Python, C++, C# or Java.
• Expertise in AI frameworks (TensorFlow, PyTorch) including machine learning algorithm and robotic platforms (e.g., ABB, KUKA, FANUC).
• Familiarity with PLC programming and industrial communication protocols (EtherCAT, Modbus, IoT etc.).
• Strong problem-solving abilities and analytical thinking.
• Excellent communication and teamwork skills to collaborate with multidisciplinary teams.
• Certification in Robotics or AI.
• Safety certifications related to industrial automation (e.g., ISO 13849).

Job Description:

• Design wide range of mechanical / structure / company’s product.
• Analyse and interpret design schematics.
• Direct accountability in managing individual efficiency and completion of work schedule.
• Attend meetings with internal and external stakeholders to discuss on their requirements in new project and/or project proposals.
• Research and develop new ideas and concept to enhance company’s performance and competitiveness.
• Work closely with various Departments to ensure timely deliverance of projects.
• Adhere to design and process system in accordance with ISO 9001 guidelines and to constantly monitor and upgrade our quality standards.
• Any other ad-hoc tasks as assigned.

Requirements:

• Degree / Diploma in Mechanical Engineering with minimum 2 years relevant experience.
• Good knowledge using 2D & 3D design software (Solidworks).
• Good communication skills, positive mind-set, hardworking and able to multi-task.

Interested candidates, do send your resume to [email protected]. ONLY shortlisted candidates will be notified through email for an interview.

Job Description

• Configure and manage critical systems, including Active Directory (AD), telephony, video conferencing, access points (AP), firewalls, VPNs, and more. Monitor and analyse the performance of LANs, WANs, and wireless networks to ensure optimal functionality.
• Configure laptops and desktops for new and existing staff, perform system backups, and handle disaster recovery (DR) as needed. Ensure all automatic system backups are in place.
• Apply system patches after hours to maintain system stability and security. Perform routine system checks to ensure continuous operations.
• Work with third-party support vendors to resolve technical issues. Participate in IT auditing and documentation to ensure compliance with company policies.
• Provide IT support for approximately 200 users, managing user accounts and roles within the ERP system. Troubleshoot login issues, assist with basic system navigation, and resolve minor technical problems.
• Monitor ERP system performance, address minor issues, apply updates, and generate routine reports for departments like finance, HR, and inventory. Customize reports based on user requirements.
• Maintain documentation for common IT processes, user guidelines, and troubleshooting procedures. Optionally, assist with creating and launching new business processes within the company.
• Perform routine backups, monitor system security, and follow compliance protocols under the guidance of the IT team.

Requirements

• Diploma or Degree in IT/Computer Science.
• Possess CCNA / Microsoft certification.
• Proven experience in providing technical support in a corporate IT environment.
• Experience with Veeam and Microsoft 365 administration.
• Familiarity with leading wireless vendors’ products (Cisco/Meraki, Aruba/HPE, Ruckus) is advantageous.
• Knowledge of virtualization technologies such as Hyper-V and VMware is a plus.
• Strong communication and administrative skills.
• Ability to manage multiple tasks and prioritize in a fast-paced environment.

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Mandatory Skills

We are seeking a skilled and motivated Data Engineer with expertise in Scala, SQL, and Hadoop to join our dynamic team. In this role, you will design, develop, and maintain scalable data pipelines and systems to process large datasets. You will collaborate with cross-functional teams to deliver high-quality solutions for data storage, transformation, and analytics.

Key Responsibilities

Data Pipeline Development

o Design, build, and optimize scalable data pipelines using Scala and Hadoop frameworks.

o Implement ETL processes for ingesting, transforming, and storing data from various sources.

Data Analysis and Query Optimization

o Write and optimize complex SQL queries for efficient data retrieval and transformation.

o Troubleshoot and resolve performance issues in queries and data workflows.

Big Data Ecosystem Management

o Manage Hadoop-based data infrastructure, including HDFS, Hive, and related components.

o Monitor system performance and optimize resource utilization in a distributed environment.

Collaboration and Problem Solving

o Work closely with data analysts, data scientists, and business stakeholders to understand requirements and translate them into technical solutions.

o Provide technical guidance and best practices for data engineering within the team.

Automation and Monitoring

o Develop scripts and tools to automate repetitive tasks and enhance system monitoring.

o Ensure data quality and consistency through validation and monitoring mechanisms.

Documentation and Compliance

o Document technical solutions, workflows, and processes to ensure knowledge sharing and reproducibility.

o Ensure compliance with data governance and security policies.

Skills and Qualifications

Technical Skills:

o Proficiency in Scala programming and functional programming principles.

o Strong SQL skills, including query optimization and database design.

o Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).

o Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.

Problem-Solving:

o Strong analytical skills with the ability to troubleshoot and resolve complex data issues.

Communication:

o Excellent communication skills to effectively collaborate with technical and non-technical stakeholders.

Experience:

6+ years of experience in data engineering, big data technologies, or a

similar role.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a skilled Process Engineer to design, implement, and optimize processes. Key responsibilities include reviewing process design documents, participating in safety and design reviews, managing change control, vendor relations, and quality risk assessments. You will oversee commissioning, qualification, and validation activities while ensuring HSE compliance. Additionally, you'll troubleshoot process issues, manage deviations, and provide SME input. Collaboration with stakeholders, SOP generation, and completing training on time are essential for success in this role.

Key Responsibilities

• Lead Process Design: Develop and review key process design documents (P&IDs, PFDs, URS, data sheets) to ensure optimal system performance and compliance.
• Drive Safety & Design Excellence: Contribute to safety and design reviews (3D models, HAZOP, DQ) to guarantee robust and safe process designs.
• Manage Project Changes: Oversee site and project change control, ensuring smooth transitions and effective execution of process improvements.
• Vendor Relationship Management: Cultivate strong vendor partnerships, ensuring timely and high-quality deliverables.
• Engage in Quality Risk Assessments: Actively participate in risk assessments to enhance process quality and minimize operational risks.
• Review & Approve Documents: Ensure all relevant technical documents are thoroughly reviewed and approved, maintaining high standards.
• Monitor & Report Progress: Track and report the status of assigned projects and tasks, ensuring transparency and alignment with timelines.
• Coordinate Field Work & Commissioning: Lead and coordinate field work, including commissioning, qualification, and validation activities, ensuring smooth implementation of processes.
• Champion Health, Safety & Environment (HSE): Take full ownership of HSE responsibilities in your designated area, ensuring strict adherence to safety standards.
• Solve Process Issues: Troubleshoot and resolve process-related issues, applying your expertise to maintain smooth operations.
• Manage Deficiencies & Deviations: Effectively address any deficiencies or deviations, working proactively to resolve them.
• Provide Expert Input: Offer Subject Matter Expert (SME) input as needed, driving improvements and operational excellence.
• Support SOP Creation: Contribute to the development and refinement of Standard Operating Procedures (SOPs) to streamline operations.
• Collaborate with Stakeholders: Coordinate with key stakeholders to ensure alignment and successful project outcomes.
• Ongoing Learning: Complete required training on time, keeping up to date with the latest tools, technologies, and industry standards.

Required Qualifications

• Minimum Degree in Engineering or Science Disciplines
• Minimum 3 years’ experience in a related field / Pharmaceutical Industry
• Proven track record in following and promoting Safety in all aspects of your role
• Strong process and automation knowledge, adequate knowledge in utility and HVAC
• Project management / coordination experience
• Proactive and self-motivated
• Adequate knowledge on cGMP and other regulatory requirements, guidelines and industry best practices
• Be IT literate and familiar with Microsoft office suite of applications
• Demonstrated proficiency of written and verbal communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a Validation Engineer to manage and execute validation activities, including equipment, utilities, and facility qualifications. You will develop and support the creation of validation documentation, apply a science-based approach to validation, analyze data, and assist with investigating deviations. Collaboration with cross-functional teams and adherence to safety, quality, and regulatory standards are key aspects of this role to ensure the successful delivery of validation projects.

Key Responsibilities

• Lead and complete critical validation activities, including equipment and utilities qualification, facility qualification (aligned with EU Annex 1), and thermal mapping for controlled temperature chambers to ensure precise temperature control and compliance.
• Perform thorough thermal mapping as part of the qualification process for temperature-controlled chambers, ensuring that all temperature conditions are validated according to industry and regulatory standards.
• Develop and support the creation of essential validation documentation, such as Risk Assessments, plans, protocols, and reports.
• Apply a science-driven and risk-based approach to all validation activities.
• Analyze, interpret, and summarize data from thermal mapping and other validation studies to ensure compliance and operational accuracy.
• Investigate and support the resolution of deviations or non-conformities identified during thermal mapping or other validation activities.
• Collaborate effectively with stakeholders, including cross-functional teams, clients, and corporate functions, to ensure seamless project delivery.
• Guarantee the safety, quality, and timely completion of thermal mapping and validation projects.
• Ensure adherence to validation lifecycle processes (e.g., URS, FAT/SAT, commissioning, IO/PQ protocols) and compliance with international regulatory standards.

Required Qualifications

• Bachelor`s degree in a science or engineering discipline.
• Minimum of 2 years of experience in pharmaceutical CQV.
• Strong understanding of validation lifecycle processes and regulatory guidelines.
• Familiarity with industry best practices for equipment and utilities qualification.
• Fluent in written and spoken English.
• Adaptable to a fast-paced, dynamic work environment.
• A quick learner with a proactive "Can-do" attitude.
• Exceptional time management skills with strong attention to detail.
• Proficiency in presentation and facilitation is an advantage.

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are seeking a Utilities Engineer to ensure the proper maintenance and compliance of facility systems and equipment according to design specifications and GMP standards. The engineer will be the Subject Matter Expert (SME) for the operation and maintenance of utilities systems, offering technical expertise for routine operations readiness. Responsibilities include ensuring adherence to standards, supporting the development of commissioning and qualification documents, and ensuring compliance with regulatory requirements. The role also involves troubleshooting technical issues, collaborating with teams, and promoting knowledge sharing.

Key Responsibilities

Operational Excellence, Continuous Improvement, and Daily Operations:

• Lead and support continuous improvement initiatives for utility system operations, maintenance, and reliability programs.
• Establish key metrics to ensure optimal performance of utility operations.
• Lead and support utility projects by reviewing engineering design documentation and related drawings.
• Lead and support Site Acceptance Tests (SAT), commissioning, and system testing to meet User Specification Requirements (URS).
• Participate in system walk-downs to ensure reliable utility system operations.
• Safety and Quality Compliance Management:
• Lead and support audit readiness for regulatory inspections to ensure compliance with site and global SOPs, GEP, and GDP.
• Assist in the development, revision, review, and approval of Standard Operating Procedures (SOPs), Risk Assessments, Preventive Maintenance Programs, and Job Plans.
• Lead and support deviation investigations, ensuring Corrective and Preventive Actions (CAPA) are implemented to prevent recurrence.
• Lead and support change control and evaluation initiatives for continuous improvement, enhancing system reliability and operations.
• Actively promote and practice Amgen's Safety Culture.

Sustainability:

• Lead and support the site sustainability program, analyzing energy consumption data, benchmarking overall usage, and identifying opportunities for optimization.
• Lead and support the development of business cases to drive sustainability targets for the site.
• Generate utility consumption data for regulatory authority submissions.

Required Qualifications

• Diploma/Degree in Engineering, Mechanical, Electrical, Chemical
• Ability to work independently and collaboratively
• Good interpersonal and communication skills with high computer literacy
• Strong team player, able to effectively work within and across teams
• Fluency in communications skills, both oral and written, including presentation skills
• Familiar with documentation in a highly regulated environment
• Interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Ability to tactfully negotiate and positively influence peers
• Strong analytical skills to identify potential improvement opportunities

Why join us?

• Generous Leave Policy including Elderly Care Leave to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Requirements:

• Bachelor's degree in Electrical Engineering, Automation, or a related field.
• Proven experience in industrial automation systems, control circuits, and programming languages such as Python, C, or equivalent.
• Familiarity with industrial communication protocols, fieldbus protocols, MCCBs, contactors, and electrical schematics.
• Strong problem-solving and troubleshooting skills.
• Experience working at stations in overseas locations.
• Willingness and ability to travel and be stationed in developing countries and work in high stress environment and multitask.
• Minimum of 1 year of experience in marine equipment training and work in the marine field.
• Knowledge or experience with Dual Fuel (DF) Engines is a significant advantage.
• Required skills to communicate with customers for Sales and technical assistance.

Job Description:

• Support the implementation and execution of Marine / Industrial Remote Monitoring System projects.
• Perform troubleshooting, maintenance, and repair of electrical systems and circuits.
• Train and assist the overseas team in electrical engineering processes and best practices.
• Provide support for other technical needs as required.
• Assist with IT troubleshooting and maintenance of on-site IT equipment.
• To support the sales activities.
• Expand sales for existing & new customers and product portfolio and Implementing marketing strategies and analyzing trends and results.