Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles and Responsibilities:

• Responsible for preparation and delivery of process calculations, design drawings and other documents for water, wastewater treatment, and air treatment projects.
• Aware the requirements for full compliance to local authorities
• Conduct process calculations such as treatment unit sizing, pipe or ducting pressure losses for above mentioned projects.
• Design PFD, P&ID drawings for these projects.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and pipings and ductings with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Evaluate technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Develop or provide design recommendations, value engineering and training to clients or co-workers
• Liaising with other departments (Project, QAQC or Commissioning) on schedule and deliverables timeline.
• Report to engineering manager.

Requirements:

• A recognized degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment.
• Master degree holders with less experience will be considered.
• Proficiency in CAD, MS office or other design softwares.  Strong analytical and problem solving, critical thinking skills.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.

• Manage & develop new customers based for spare part sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• Executing sales & marketing strategies to maximize opportunities in both domestic and international markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

The Senior Infrastructure Engineer is responsible to develop software based on design requirements and ensure software and subroutines are working to specification, program codes have conformed to standards and are delivered with quality meeting schedule and requirements. He will also implement systems in accordance to specifications & service level. Where relevant, perform the necessary system programming & configuration.

• Develop, test, and deploy scalable, secure, and high-performance web applications using Microsoft .Net framework, C#.Net, and ASP.Net

• Design and implement database solutions utilizing MS SQL Server and TSQL, ensuring optimal performance and data integrity

• Collaborate with cross-functional teams to gather requirements, analyze user needs, and translate business requirements into technical specifications

• Troubleshoot and debug issues in existing software applications, providing timely resolutions and enhancements

• Stay updated with industry trends and best practices, continuously enhancing technical expertise and contributing to the improvement of development processes

• Support existing applications and report generation

Required Skills:

• Bachelor’s degree in computer science, Engineering, or a related field

• At least 2 years of relevant experience in software development using .Net technologies

• Proficiency in Microsoft .Net framework, C#.Net, ASP.Net, and web technologies

• Strong experience in developing and optimizing database solutions using MS SQL Server and TSQL

• Solid understanding of software development methodologies, object-oriented programming principles, and design patterns

• Excellent problem-solving skills

• Effective communication and teamwork abilities.

Good to Have:

• Familiarity with PowerShell scripting for automation and system administration tasks

• Experience with Microsoft 365 (M365) platform and integration

• Knowledge of cloud platforms (e.g., Azure, AWS) and services

• Knowledge of google workspace.

The Field Service Engineer is responsible for providing technical expertise and support at customer sites within the maritime industry. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

The Lead Project Engineer is responsible for achieving project objectives within the defined time and cost framework while ensuring full delivery scope and quality. This role involves comprehensive project management, technical verification, and stakeholder communication to ensure customer satisfaction and successful project execution.

Key Responsibilities:

Project Objectives & Delivery

• Achieve project objectives within the defined time and cost framework.
• Ensure the delivery scope and quality meet the desired standards.

Customer & Stakeholder Liaison

• Liaise with the Customer, End User, and/or appointed Engineering Contractor.
• Ensure technical compliance with specifications.
• Technically verify customer requirements for order processing.

Project Management & Execution

• Manage projects within budget and on schedule until customer acceptance and hand-over.
• Oversee tender evaluation and provide Project Management support.
• Source third-party components and manage subcontractors.

Documentation & Data Management

• Manage documentation required by the project.

Team Leadership

• Lead and mentor other project team members when necessary.

Progress Reporting

• Report regularly to the Project Department Manager on project progress.

Responsibilities:

• Plan, design and supervise C&S engineering works (e.g. buildings, roads, drains, sewers, earthworks, underground buildings, temporary structures).
• Perform analysis and design for the project.
• Supervise the drafting of drawings related to design.
• Ensure all engineering works comply with relevant statutory standards, regulations and Codes of Practice.
• Manage project stakeholders, clients, design team, site team and other relevant parties.
• Coordinate with contractors, project team and design consultants.

Requirements:

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.
• Prior working experiences in structural engineering projects preferred.
• Familiar with structural engineering design to local Codes, Regulations and requirements,and Eurocode.
• Well verse in structural design software, e.g. ETABS, STAAD Pro, SAFE, SAP 2000, MIDAS, etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

JOB DESCRIPTION

* Design and develop Mechanical Equipment/Systems, keeping in mind budget, timelines and other essential resources.

* Work with a team of Engineers in the creation of new product designs, ensuring alignment with project objectives and timelines.

* Utilized CAD Software to create 3D Models and details drawings for new product development.

* Implemented design modifications and optimizations to streamlne the assembly process.

* Collaborate with cross functional teams including product management, manufacturing and quality assurance to ensure successful product development and launch.

* Troubleshoot problems and devise solutions to resolve them.

* Research and keep up with the Dynamic Technology and trends in the mechanical design spectrum.

REQUIREMENTS

* Degree in Mechanical Engineering.

* Knowledge in dealing with Engineering Drawings and 3D Modelling.

* Experience working with designing software - Solidworks and Autocad.

* Minimum 5 years of relevant working experience as Mechanical Design Engineer.

* Able to work independently with minimal supervision.

* Strong verbal, written and communicatin skills.

* Sound knowledge of Computer Application and Microsoft Office.

* Willing to work on weekends and travel occassionally if required.

We are looking for Software Engineer (Golang) to join one of the Government agency!

• Exciting opportunity to work with a team of professionals to deliver high quality application
• Great career progression and friendly working environment
• Attractive salary and employment benefits

What you will be working on:

• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers

What we are looking for:

• Minimum 4-5 years of software development experience in web applications using Golang
• Experience in Reactjs/Typescript/Nodejs, preferably Golang
• Familiar with JavaScript unit testing frameworks such as Jest or Mocha

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui (Vivian) - R2090138

ScienTec Consulting Pte Ltd - 11C5781

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

Working Hours: Mon-Fri (8.30am – 5.30pm)

Job Summary:
The face-to-face IT Support role will be responsible for providing on-site technical support to customer users, resolving software and hardware issues, and answering IT related questions. This role requires strong problem-solving skills, a customer-centric approach, and the ability to communicate technical information clearly to non-technical staff.

Key Responsibilities:

• Provide and maintain exceptional customer service, ensuring timely, efficient, and professional responses to all customer inquiries and issues.
• Install, upgrade, support, and troubleshoot Windows or Mac operating systems and applications, such as Microsoft Office or other authorized desktop software.
• Diagnose and repair hardware issues on computers or facilitate the warranty process as needed.
• Utilize technical expertise to support corporate-issued desktop, laptop, and mobile devices, as well as network, email, and other related services.
• Offer ideas and solutions to prevent recurring issues that impact client computing support and overall employee productivity.
• Collaborate closely with remote IT teams to ensure system functionality and adherence to processes.

Qualifications:

• Diploma in computer science, Information Systems, or a related field.
• Minimum of 3 years of experience in IT support, particularly in deskside support roles, troubleshooting various PC software and hardware issues.
• In-depth knowledge of PC hardware, operating systems (Windows, macOS), software applications, and a basic understanding of IT infrastructure (network services, VPN, etc.).
• Exceptional troubleshooting and problem-solving abilities.
• Strong communication skills, with the capacity to explain technical concepts to non-technical users.
• Microsoft, Mac, or other relevant certifications are a plus.

Soft Skills:

• Exceptional customer service orientation and customer-focused abilities, combined with patience and a positive attitude.
• Ability to thrive in a fast-paced and demanding environment.
• Capacity to work independently and as part of a team, demonstrating initiative, self-motivation, and self-discipline.
• Effective prioritization and management of multiple tasks.
• Commitment to continuous learning and adaptability to new technologies.
• Fluent English communication skills.

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

- Proposed CAAS Extension of ATCC

Requirements

- At least 5 years of supervisory experience in supervision of Civil/Structural works, RC & steel works.

- Experience in supervision of medium to large scale building works, piling works, temporary works, Ground Building Works (GBW) for Government Institutional projects.

- To provide full supervision works to ensure works are carried out in accordance to approved plans under Building Control Act.

- Assist QP to keep and maintain site records.

- Job site is at Sealand Road, Changi Area, must be willing to travel and work at that area

- Able to lead a team of site staffs.

- Possess Degree in Civil Engineering recognized by PEB and registered with IES as Resident Engineer

Interested applicants to reply to:

[email protected]

Quote: SG510

Submit resume with photo including current and expected salary and contact no.

• Support district sales personnel in the handling of Company program service calls on existing products and services and assist in the correction problems as appropriate.
• Participate in design reviews, new application start-ups, and evaluations.
• Assist in critiquing products for serviceability, performance and reliability.
• Inter-act with appropriate company resources and work as a team.
• Ability to assess on-site field problems and operate required testing equipment to return systems to customer conformance.
• Coordinate and manage replacement parts programs with the individual manufacturing plants to ensure the availability of components as needed.
• Assist in the preparation of reports detailing technical problems and solutions to initiate necessary corrective product modifications and/or recommended process changes.
• Document value provided to the customer whenever possible.
• Assist in the development of troubleshooting service guides and bulletins on existing products.
• Assume lead role of maintaining troubleshooting guides/bulletins and distribution to departments when required.
• Qualify, coordinate and monitor outside subcontractor network as required to ensure repair timelines are maintained, and customer satisfaction is maintained.
• Work with other district personnel toward continuous improvement of policies and procedures resulting in increased customer satisfaction.
• Provide installation resource services on a project request basis necessary to satisfy the needs of the customer. Services may include (but not limited to) field surveys, installation checklists, roll-out support services, etc.
• Provide training to the first-line Account Managers on Company offerings and the resources available to them to assist in answering customer questions.
• Seek to keep abreast of the latest industry advances through continuous education

Requirements:

• Technical Degree or equivalent education with industry experience is preferred.
• Must have knowledge of and experience in materials, scheduling, inventory, manufacturing and
• installation processes.
• Excellent organizational, interpersonal, verbal and written communication skills are essential.
• Ability to manage multiple projects simultaneously and maintain project schedule timelines.
• Able to write and maintain clear, concise reports utilizing a standard laptop computer.
• Someone who can think logically and interject common sense and is prepared to make decisions.
• A self-motivated, goal oriented, as well as a team player.
• Required to travel to Jurong Island. Company car is provided.