Key Accountabilities

• Technical support to Group sales affiliates in the region for product groups such as control products, IAQ products and air conditioning installation material products
• Perform as the technical supporting desk
• Support the installation and commissioning for each job site
• Create demo kits for assigned product for regional promotion
• Support the marketing department to give the technical advice for the sales promotion enhancement
• Analyse and test product failures for better quality achievement
• Any adhoc duties as assigned by superior

Requirements

• Degree in Electrical/Electronic/Mechanical Engineering, or relevant
• Experience in air-conditioning or electrical industry will be an advantage
• Proactive and influential personality with ability to persuade and drive decisions
• Good to have PC programming and drafting skills
• Willing to travel with APEC regions

The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

(Hiring for new branch located at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Mon.- Fri. office working hours
• Salary Range: Basic salary $2,600 ~ $3,500 + Incentive/Commission + Creative Performance Bonus)

Responsibilities

• Responsible for developing long term customer relationship and maximizing customer retention;
• Support on pre-sale and post-sale, not limited to solution proposal on technical requirement, design & budget control, timeline management, etc. based on projects;
• Participate in industrial related exhibitions, marketing campaigns/events;
• Other ad-hoc duties assigned by the superior.

Qualifications

• Min. Higher Nitec in Engineering (any field), or equivalent;
• Entry level applicants with the right learning attitude and positive minder are welcome to apply as comprehensive On-Job-Training will be provided;
• Excellent written and oral communication skills
• Pro-active, possess technical and Negotiation/social problem-solving skills with attention to details;
• Posse valid Class 3 driving licence is a MUST

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work.

(We regret to inform that only shortlisted candidates will be notified)

Job Description

• Create program for CNC Milling, Wire cut and EDM
• Create drawing for copper electrode
• Create setup for EDM setting and CNC Milling
• Lead a group of CNC Mill Programmers
• File all documents / records according to ISO requirements
• Perform any tasks assigned by superior

Requirements

• Diploma or Technical Certificate
• 4 years related experience
• Knowledge of Plastic Injection Mould and Unigraphics

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. Our software platform is leveraging cutting edge cloud/on-premises/edge platforms, advanced computer vision algos, advanced ML concepts & models and more.

The company is led by globally renowned experts who previously headed large groups at Microsoft and Intel. The company HQ is located in Singapore (One North Area) and operates in over 10 countries.

Cynapse is looking for a talented and highly motivated Project Management Officer (PMO)/Quality Assurance (QA) Intern to join our team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of project planning and management, working in a cutting edge, dynamic and professionally challenging environment.
Successful interns may be offered a full-time permanent position at cynapse at the end of the internship period.

Responsibilities
The selected candidate will be involved in one or more job item listed below, depending on management decision:
- Supporting the planning and delivery of Vision AI Software Projects/Programs in Singapore and other countries
- Support multiple on-going projects
- Assist with the project planning, resourcing and scheduling
- Assist in ensuring that projects are delivered on time, and provide timely reports on project status and activities Assist in requirements gathering and validation, solution development and testing, deployment, UAT and solution commissioning
- With guidance, perform usage tests on software thoroughly, identifying bugs and defects.
- Evaluates different functionalities and aspects of the product and generate report.
- Assist in communicating and managing vendors, sub-contractors, partners and other stakeholders
- Follow the company PM best practices
- Work in an Agile environment (SCRUM)

Qualifications
- Completed at least 1 year of studies as part of a Diploma/Bachelor/Master in one of the following subjects: IT/Engineering/Project-Management
- At least 6 months of experience in managing or delivering IT project/s
- Some Experience with vendors and partners management
- Analytical Thinking
- Innovative, motivated and a quick learner, attention to detail, curiosity, and passion for technology
- Bonus: Technical background/experience with software development

Benefits
- Unique opportunity to work with a talented global team on cutting edge technologies
- Informal and exciting work environment with flexible hours

Job Types: Full-time, Internship

Contract length: 6 months

Benefits:

• Flexible schedule

Schedule:

• Monday to Friday

Work Location: In person

Job Title: Sputter Process Engineer (ID1603)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift
Night Shift: 8:00pm – 8:15am
Salary: $2800 - $3600
Benefit: 12 days Annual Leave, AWS and Variable Bonus


Job Description
• Ensure the sputtering machine is tuned to operate at maximum capacity without compromising performance.
• Adjust the sputtering parameters to maintain high-quality output, minimizing defects and inconsistencies.
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition.
• Optimize the sputtering process to maximize the efficient use of materials, reducing waste.
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional
• issues.
• Analyze data from the sputtering process to identify trends, issues, and areas for improvement.
• Based on data analysis, make precise adjustments to the sputtering machine to enhance performance and quality.
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results
• over time.
• Any other job assigned by superior.

Requirement:
• Diploma or Bachelor's degree in any Engineer-related field.
• Minimum 4 years of experience in manufacturing process related role for Diploma Holder
• Material Science & Chemistry Fresh Graduate for degree profile.
• Fresh Graduate with strong technical understanding
• Understanding of Sputtering technology
• Good knowledge of Minitab, Microsoft Office

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.We are innovative, focused and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state of the art solutions as part of Team Rapsodo.

The Role:

We invite experienced C++ Software Engineers to apply as Senior Software Engineers with us. We value proactive problem-solvers with expertise in C++, who take ownership of their work and show dedication to ongoing learning and growth.Candidates who are adept at solving complex issues, especially those related to low latency or multi-threaded, are highly regarded at Rapsodo.

Responsibilities:

This role would be expected to:

• Be open to new concepts and ideas, demonstrate professional curiosity, and driven to succeed with a strong sense of ownership as a problem solver.
• Possess strong organizational skills, attention to detail, resilience, and adaptability in a dynamic environment
• Collaborate closely with Rapsodo's internal teams to ensure seamless integration of middleware solutions.
• Coordinate and execute middleware integration tasks across various technology platforms to support the development and deployment of sports data analytics solutions.
• Engage with a diverse range of applications and technologies, contributing to the dynamic and challenging nature of the role.
• Provide Tier IV and higher support for any outstanding technical issues.

Requirements

• Bachelor’s Degree in Computer Engineering or Computer Science-related discipline
• At least 7 years of work experience in a relevant role, with demonstrated prior experience in leading engineers in delivery end-to-end product development projects
• Demonstrate expertise in modern C++ and multithreading concepts, along with fundamental knowledge of Linux and Python / Bash scripting.
• Strong problem-solving skills with the ability to troubleshoot the most challenging technical issues effectively.
• Demonstrate a self-starting attitude with a strong desire to learn and an action-oriented approach
• Excellent teamwork skills and the ability to work cross-functionally.
• A background in Team Sports will be an added advantage!

• Lead & own the process of preparation of design deliverables with due consideration for applicable codes and standards.
• Interface with Leads of other departments to reflect the as date input from other departments, as applicable
• Take ownership of deliverables producted & their quality
• Capture all changes/modifications in the deliverables that has been intimated by Project, prior to release of deliverable.
• Ensure appropriate checking & review of all documents/drawings before release at any revision status
• Work planning/forecast and effective utilization of manpower,progress monitoring and adherence to scheduled completion of engineering documents.
• control of quality for engineering documents regarding Quality assurance basis
• Keep project manager informed on progress of project, with agreed periodicity & milestones.
• Monitor budget compliance of design deliverable production
• Coordination with the other Engineering disciplines, client, and vendors .
• Perform System level evaluation, analyse faults/failures, and recommend solution.
• Manage and develop the engineering design work
• Appointed as SME for development engineering standards for the department.
• Coordinate with the drafting office on engineering drawings.
• Responsible for the quality of the engineering work and processes.
• Manage, control, and supervise the integration and engineering work for the projects.
• Recommend engineering solutions and alternatives to meet the project schedule, budget and quality.
• Prepare technical and design documentation and reports (Block Diagram, Bill of Material, Functional Design Specification, Termination Drawings, Calculation report, Cable wiring diagram...etc.)
• Develop system, Integration and simulation test requirements, planning acceptance criteria and perform testing
• Conduct product Factory and Site acceptance test with clients.

Job Responsibilities:

• Liaise with the Main contractors, Site Supervisor on the planning and progress of M&E works to meet the project schedule.
• Supervise M&E works to ensure it adhere to specifications, are completed on schedule, within budget and accurately documented.
• Undertake ad-hoc duties as assigned to support operational need and project requirements.

Requirements:

• Diploma in Construction Engineering / related field.
• Knowledge in design and building project of M&E works and relevant code of pratice.
• Willing to work on-site.
• 5.5days work a week. (Shift work might be required during critical phase).
• Entry Level are welcome to apply. Training will be provided

Job scope:

1. Assist mechanical and electrical engineers for system assembly, installation, commissioning, and troubleshooting.

2. Carry work assembly and installation according to design requirements, schematics, drawings or working instructions.

3. Undertake ad-hoc responsibilities assigned.

Knowledge, skills and experience:

1. NITEC/Diploma in Mechatronics/Mechanical/Electrical/Electronic engineering

2. Knowledge on mechanical and electrical principles.

3. Able to comprehend electrical and electronic schematics and mechanical drawings.

4. Hands-on experience is a must, e.g. soldering, wiring, M&E assemblies, panel wiring, grinding, drilling.

5. Able to work with minimal supervision.

Expectations:

1. Team player.

2. Attention to details

3. Strong in analytical thinking and problem-solving skills

4. Be responsible and self-disciplined.

5. Assure quality and accuracy of work.

6. Maintain tidiness, cleanliness and safety of co-working workspaces.

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs

• Perform computer architecture performance simulation

• Analyse experimental data and perform architecture explorations

• Identify bottlenecks in design and provide feedback on micro-architecture

• Propose chip architecture optimizations for chip performance, power, and area improvement

• Cross-team collaborations to deliver high quality chip products

• Validate the correctness of the AI chip designs

• Write patents

Qualification:

• Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

• Familiar with computer architecture, such as AI accelerator, CPU, network-on-chip, memory hierarchy

• Familiar with C/C++ language

• Familiar with computer architecture simulation is preferred

• Strong learning capability, good communication and collaboration skills

• Fresh graduates are also encouraged to apply

· Preparation of tender documents & quotation and submission to client.

· Continually seek new opportunities and too increase customer satisfaction and well relationship with client.

· Develop and maintain viable long-term relationships with Clients & Sub-contractor.

· Manage construction activities including planning, coordination, execution and monitoring of installation and construction works on site.

· Maintain good quality standards, carry out site inspections and resolve technical issues on time.

· Provide project estimation cost, analysis reporting for ongoing cost, manage allocation of costs.

· Execute projects with minimal supervision within budget & schedule

· Drive the work force with friendly relationship.

· Responsible for material procurement, subject to the client approved specification and on time requirement to site.

· Conduct project progress reports, client updates and drive internal and clients’ progress meetings.

· Prepare risk assessment and method of statements.

· Solar projects experience is added value.

Job Responsibilities:

1. Develop and release warranty claims policies for service providers.
2. Review and settle service provider claims.
3. Provide training and support for service providers on claims processes.
4. Inspect and supervise the disposal of service provider claim parts.

Recruitment Requirements:

1. Minimum Bachelor in any field.
2. At least 3 years of warranty admin experience in automotive industry.
3. Strong communication skills, preferred proficiency in English and Mandarin to liaise with HQ colleague.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a Research Engineer to join our research team to work on related Soft Robotics.

Key Responsibilities:
To design, build and test whole hybrid robot systems for specific scenarios.

Qualifications

• Possess a bachelor’s degree in biomedical engineering or related field.
• Have relevant experience with hybrid robot system development and evaluation.
• Have good knowledge of soft robot actuator/sensor/integration fabrication.
• Good written and spoken communication skills and the ability to collaborate effectively in a team environment.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a Research Engineer to join our research team to work on related Soft Robotics.

Key Responsibilities:

To design, build and test whole hybrid robot systems for specific scenarios.

Qualifications

• Possess a bachelor’s degree in biomedical engineering or related field.
• Have relevant experience with hybrid robot system development and evaluation.
• Have good knowledge of soft robot actuator/sensor/integration fabrication.
• Good written and spoken communication skills and the ability to collaborate effectively in a team environment.
• Open to fixed-term contract.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cloud Infrastructure Engineer (Endpoint Security) to join us!

Responsibilities:

· Work with Product Owner and Product Principals to operate the various endpoint security tools, including:

- EPP/EDR

- Data Loss Prevention

· Work with Central ICT Infra teams to operate the on-prem components of the SSE platform.

· Conduct system health check and proactively identify and troubleshoot issue in end-to-end manner.

· Manage the change, release, incident, problem management processes in ITSM platform.

· Document the requirement and specification to address the needs for all Public Service agencies.

• Comfortable with a 5-year direct contract
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Senior Cloud Infrastructure Engineer (Device Management) to join us!

Responsibilities:

Work with Product Owners, internal engineering team and Product Principals to oversee and co-ordinate the operation of various endpoint management tools, including:

1. Windows Autopilot
2. Intune
3. Application control
4. Scripting and automation
5. Virtual Desktop Infrastructure
6. Microsoft Graph API

• Co-ordinate with Central ICT Infra teams to operate the on-prem components of the above platforms.
• Oversee a team of Ops Engineers to manage the change, release, incident, problem management processes.
• Ensure timely handling of requests and queries.
• Lead incident response and recovery by analysing the root cause and submission of RCA report.
• Drive improvement in operation effectiveness by implementing the monitoring and alerting tools.
• Document the requirement and specification to address the needs for all Public Service agencies

Mandatory Requirements:

• Exam: Microsoft 365 Certified: Endpoint Administrator Associate, for demonstrating the skills and knowledge of endpoint management and security using Microsoft 365 tools and services.
• Proficient in PowerShell scripting

Additional Skillset(s) (Good to have):

• Prior experience in developing Windows desktop applications using C#, .NET
• Familiar with developing ServiceNow workflows
• Endpoint monitoring and observability for infrastructure reliability using tools such as NexThink, Riverbed, Dyatrace...etc

Additional 2 or more certifications (at least one from each group):

Group 1

1. DevOps Institute: Site Reliability Engineering Foundation or Site Reliability Engineering Practitioner, for demonstrating the skills and knowledge of applying DevOps principles and practices to the endpoint engineering process
2. ITIL 4 Foundation Certification, for demonstrating the skills and knowledge of the ITIL framework and best practices for ITSM.
3. Certified Information Systems Security Professional (CISSP) or CompTIA Cybersecurity Analyst (CySA+)

Group 2

1. Exam MS-102: Microsoft 365 Administrator: deploys and manages Microsoft 365 and performs Microsoft 365 tenant-level implementation and administration of cloud and hybrid environments
2. Exam AZ-104: Configure, manage, secure, and administer key professional functions in Microsoft Azure.
3. Exam AZ-140: Plan, deliver, manage, and monitor virtual desktop experiences and remote apps on Microsoft Azure for any device.
4. UiPath Certified Professional Automation Developer Associate or PL-500 Microsoft Certified: Power Automate RPA Developer Associate

Requirements:

• Comfortable with a 5-year direct contract (with perm benefits)
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cybersecurity Engineer (Cloud Infrastructure and Log Management) to join us. The employment contract will end on 31 March 2026.

You will be working on:

• Responsible to develop, setup and maintain large scale log ingestion cloud infrastructure.
• Responsible to handle the log ingestion workflow from Subscriber till backend SOC.
• Develop automation for end-to-end log ingestion processes to facilitate scalable ingestion infrastructure and provide better Subscriber experience.
• Develop and maintain custom log parsers.
• Monitor and respond to incidents for the cloud infrastructure and log ingestion system.
• Provide consultancy to Subscribers and their contractors on their log ingestion matters.
• Assist Subscribers on-site to setup and troubleshoot their log management system, ensuring their log are successfully being forwarded to the SOC.
• Engage stakeholders and enhance operations to improve on the log ingestion workflow/pipeline.

To succeed in this role, you will ideally have:

• Minimum 3 years of working experience in Cybersecurity.
• Minimum 3 years of working experience in one or more of AWS, Azure or Google Cloud Platform, doing Cloud Infrastructure or Cloud DevOps.
• Experience with IAC deployments and it’s best practices.
• Knowledge of SIEM or log parsers will be an added advantage.
• Good to have knowledge on Node.js, Python or other scripting languages
• Good to have knowledge and experience on GitOps
• Possess good communication skills and interpersonal skills.
• Passion for improving operations to ensure the system are secure and resilient.
• Self-motivated, driven, and possesses a strong aptitude for continuous learning.
• Good team-player who is willing to help the team to succeed in the achieving the objectives.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Responsibilities:

Carry out activities to addresss & resolve Non-Quality Events (NQEs)

Monitors & carry out activities to resolve NQEs at various product / production lines

• Monitors & records NQEs from the production line
• Reviews, analyses & validates NQE contents
• Executes immediate containment actions for NQE e.g., hold lot in Manufacturing Execution System (MES), etc.
• Prepares and consolidates quality issue review topics (to share on the progress of follow ups on NQEs / MRBs) prior to daily meeting with Yield Dept
• Prepares information package required for MRB (e.g. event chronology, preliminary investigation and analysis results, etc.); Facilitates MRB meetings
• Records, follow ups and reports Quality Engineering activities (e.g. NQE, MRB, etc.) on Quality Activities Tracker
• Issues & drives 8Ds for NQE issues

Monitor product thru Quality Gate

Applies Quality Gate (QG)

• Monitors & records QGs results from the production line
• Performs lab analysis (e.g., SEM / EDX) on QG failed parts
• Participates in task forces (defect analysis, risk assessments)

Following the detection of QG failed lots, proposes short-term actions to ensure integrity of the quality of products and / or processes (i.e., equipment shutdown, etc.)

Others

Data Analysis: Pulls, plots capability & trend and analyses data from JMP & Klarity

Reports: Updates & presents various Quality Engineering reports & KPIs

Others: Performs audits and other tasks as may be assigned

Requirements:

Educational Qualifications :

Diploma – Minimum 2 years of relevant experience in a manufacturing environment

Higher NITEC – Minimum 3 years relevant experience

NITEC – Minimum 6 years relevant experience

Technical / job knowledge :

• Knowledge in Quality tools and methods (SPC/MSA/FMEA, Problem-Solving & Audit skills) is an advantage
• Knowedge in statistical tools (e.g. JMP, Klarity, etc.) is an added advantage
• Knowledge and skills in lab (SEM/EDX, etc.) is an added advantage
• Knowledge of semiconductor products & manufacturing processes

Personal capabilities :

• Meticulous and with a sense of initiative, responsibility & urgency
• Team player with positive attitude and willingness to learn

Others :

• Able to work on normal swing shift (Sunday - Thurs), 8.30am to 6pm

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

Responsibilities:

· Participate in feature definitions of the leading-edge AI chips

· Lead and participate the microarchitecture design of AI chip SoC and the subsystems

· Lead and participate in the front-end design and the implementation using HDLs

· Perform critical analysis and propose novel chip architectures for performance, power, and area improvement

· Cross-team collaboration with Software, DV, and Physical Design to meet performance, power, and area goals

· Write patents

Qualification:

· Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

· Experience in computer architecture, such as AI Accelerator, CPU, network-on-chip, memory hierarchy

· Experience in hardware module development using HDLs

· Experience with Logic Synthesis, Linting, CDC and DFT tools is preferred

· Good understanding of RTL verification flow and environments (e.g., UVM, VIP) is preferred

· Strong learning capability, good communication and collaboration skills

· Mid-senior to senior level positions are available

Job Title: Production Engineer / Executive (ID3469)
Location: Jalan Buroh
Working Hours: Mon - Fri 7:30am -5pm
Salary： $3500-$4000

JOB RESPONSIBILITIES
• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas.
• Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

REQUIREMENTS
• Minimum 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Able to work under pressure.
• Computer literate.
• Knowledge in ISO is an advantage.

• Position : M&E Coordinator/Engineer (A&A Industry) - Up to $5,500 - All Welcome
• Location : Based on Project Sites
• Working hours : Monday to Saturday | 8am to 6pm (Saturday working hours based on site)
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing OA/QC inspections to meet wi construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendor
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub contractors.

Requirements:

• Minimum of Diploma in M&E Engineering or relevant; with at least 2 years of experience.
• Willing to work on weekends if site required.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : ALL WELCOME - Technical Sales Engineer (NO EXP REQUIRED/TRAINING PROVIDED) - Up to $4500
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684